Thermal investigation of cobalt, nickel and copper complexes with 8-aminoquinoline

Complexes of Co(II), Ni(II) and Cu(II) with 8-aminoquinoline were prepared and characterized, and their thermal behaviour and decomposition pathways were studied. The thermal stabilities are discussed in terms of ionic radii, crystal field splitting energy and steric hindrance. The effective roles of the counter-ions (Cl^? and NO ₃ ^? ) on the decomposition temperatures and the final products were also clarified. The energies of activation (E _a ) and the orders of some decomposition reactions were determined. Light is shed on the nature of the interaction of the water of crystallization and the polymorphic transformation phenomenon.     

Electrochemical deposition and characterization of polyppyrrole coatings doped with nickel cobalt oxide for environmental applications

Electrochemical depositions of hybrid polypyrrole/nickel cobalt oxide (PPy/NiCoO) coatings onto ferritic stainless steel surface were carried out with different electrochemical techniques from 0.1 M pyrrole (Py) in 0.2-M oxalic acid (OA) solution and less than 150-nanometer-sized NiCoO particles. The structural properties of the composite were investigated by using different methods such as transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometer (EDS) and Raman spectroscopy. The embedded NiCoO particles, uniformly distributed onto the surface of the PPy film, have similar oxide ratios corresponding to a mixed oxide structure. The electrochemical characterization was done using polarization curves and linear sweep voltammetry (LSV) related to oxygen reduction reaction (ORR) in alkaline solution and hydrogen peroxide as an oxygen source. Concerning the exchange current densities for ORR, the obtained values (between 1.06 and 1.45?×?10^?3 mA cm^?2 for a total amount of NiCoO of 0.1 mg cm^?2) are comparable with other polymer films with Pt.     

Synthesis and characterization of divalent manganese,cobalt, nickel,copper and zinc complexes with nicotinic acid

Coordination compounds of the transition metal(II) acetylacetonates of the formula [M(NA)₂(acac)₂ ]_n (M = Mn, Co, Ni, Cu and Zn; NA = nicotinic acid and acac = acetyl-acetonate anion) have been synthesized and characterized by chemical analysis, magnetic susceptibility, ligand-field spectra, IR and far-IR spectral measurements as well as photoacoustic spectroscopy in the solid state. Tentative stereochemistries for the complexes isolated in the solid state are suggested. The ligand-field parameters 10 Dq, B, β, λ and CFSE are calculated for cobalt and nickel complexes and are in good agreement with the proposed geometries. The metal ions attain six-coordination through the four oxygens of the anion and two donor atoms of the nicotinic acid ligands acting always as monodentate ligands. The formation of the compound results in a considerable shift of v(M-O) to lower frequencies in all the compounds related to parent acetylacetonates.     

Formation of cobalt, nickel and copper complexes with murexide in ethanol-water mixtures

The complexation reactions between murexide and Co²⁺, Ni²⁺ and Cu²⁺ in C₂H₅OH-H₂O mixtures have been investigated spectrophotometrically. The formation constants of the 1:1 complexes formed increase in the order Co²⁺ < Ni²⁺ < Cu²⁺ for all solvent mixtures studied, and log K_f is a linear function of the mole fraction of ethanol. The heat of complexation was determined calorimetrically for the nickel and copper complexes. The values of ΔH° and ΔS° are solvent-dependent, and all three complexes have negative ΔH° and positive ΔS° values.     

Thermal analysis of cobalt,nickel and copper complexes of 2-aminothiazole

The thermal decomposition of 2-aminothiazole (2-amt) complexes of general formula M(2-amt)₂X₂ [M = Co(II) and Cu(II)] and Ni(2-amt)₄X₂ [X = Cl and Br] have been studied in air and argon by TG and DTG as well as by DTA in nitrogen; end products from the decompositions in air have been characterised by X-ray powder diffraction. Decomposition stoichiometries have been proposed and factors governing the thermal decomposition have been discussed.     

Cyclodextrin inclusion complexes as novel MOCVD precursors for potential cobalt oxide deposition

The potential use of the inclusion complexes of β‐cyclodextrins with metal halides as novel precursors in MOCVD applications was examined in terms of microstructure, thermal stability and chemical modifications during heating. The investigation was especially focused on the inclusion complex of β‐cyclodextrin with cobalt iodide for cobalt oxide thin film deposition. The general composition assigned to the dextrin's inclusion complex was: (β‐CD)₂^?CoI₇^?11H₂O. It was found that the inclusion complex of β‐cyclodextrin with CoI₂ may prove a promising alternative to traditional metalorganic or organometallic Co‐precursors for precise CVD applications. The sublimation temperature must be preferably in the range 70–125 °C, and the decomposition temperature (substrate temperature) in the range of 350–400 °C. Three distinct regions can be recognized by heating: transformation of tightly bound water molecules into easily movable ones, sublimation of iodine ions and Co atoms oscillation and thermal decomposition of the glycositic ring into volatile by‐products. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,spectroscopic, and antimicrobial studies of the bivalent cobalt,nickel, and copper complexes of thioacetamide

A series of metal complexes of cobalt(II), nickel(II), and copper(II) having the general composition [M(L)₂X₂] with thioacetamide have been prepared and characterized by elemental chemical analysis, molar conductance, magnetic susceptibility measurements, mass, IR, EPR, and electronic spectral studies. The IR spectral data suggests the involvement of sulfur and amino nitrogen in coordination to central metal ion. On the basis of spectral studies, an octahedral geometry has been assigned for the cobalt(II) and nickel(II) complexes whereas tetragonal geometry for copper(II) complexes. Thioacetamide and its metal complexes have been tested in vitro against a number of microorganisms in order to assess their antimicrobial properties.     

Synthesis and structure of nickel and copper chelate complexes with coumarin azo ligand

1. Download high-res image (128KB)
2. Download full-size image

     

Novel synthesis of copper oxide on fabric samples by cathodic cage plasma deposition

The fabrics with copper or copper oxide deposition are of considerable interest because of exceptional antibacterial properties, which are useable in medical, textiles, and hygiene applications. Unfortunately, the conventional techniques take long processing time, complex equipment, and combination of several processing steps (nanoparticles synthesis and their deposition on fabrics). In this novel study, cathodic cage plasma deposition assisted with copper cathodic cage is used for the synthesis of the copper oxide on polyester and polyamide fabrics. For the enhancement of synthesis efficiency, the effect of cathodic cage lid thickness is also investigated. The samples are assessed by using scanning electron microscopy, elemental dispersive spectroscopy, and X‐ray photoelectron spectroscopy. It is found that using cathodic cage plasma deposition, fabrics can be successfully synthesized by the copper oxide with comparatively small treatment time, cost‐effectively, and environmentally friendly. Interestingly, cathodic cage plasma treatment is already proved to be working effectively on industrial scale; thus, it is predicted to be of noteworthy importance for fabrics processing on large‐scale garments manufacturing and hospitals.     

Synthesis and characterization of copper(II), nickel(II) and cobalt(II) complexes with novel thiourea derivatives

A novel series of thiourea derivatives, namely, N,N-diphenyl-N-(4-phenyl-benzoyl)thiourea (HL¹), N,N-diphenyl-N-(4-chloro-benzoyl)thiourea (HL²) and N,N-di-n-propyl-N-(4-chloro-benzoyl)thiourea (HL³), and its metal complexes has been prepared and characterised by elemental analysis, i.r. spectroscopy, ¹H-n.m.r. spectroscopy, mass spectrometry and single crystal X-ray diffraction. The ligand coordinates to Ni^II, Cu^II and Co^II in a bidentate manner yielding essentially neutral complexes of the type cis-[ML₂]. N.m.r. spectra and single crystal X-ray diffraction analysis revealed the presence of a distorted tetrahedral coordination ML₂ complex.     

Thermal and structural studies of the chloro complexes of cobalt,nickel and copper with 3-phenylpyridine

The chloro complexes of cobalt, nickel and copper with 3-phenylpyridine were prepared in ethanolic solution from which solid compounds were isolated. The cobalt and copper complexes have stoichiometry M₂LCl₄ while the nickel complex has stoichiometry NiLCl₂. The suggested structure for the cobalt and copper complexes is tetrahedral, while for the nickel complex it is octahedral. Thermal analysis studies show that the cobalt and copper complexes form intermediate complexes before their metal oxides are produced. The nickel complex also forms an intermediate complex and then nickel chloride before the nickel oxide is obtained.     

Divalent nickel,cobalt and copper complexes of a tetradentate N6 macrocyclic ligand

Summary Divalent nickel, cobalt and copper salts react with 2,6-diaminopyridine and acetylacetone to form complexes containing a 16-membered N₆ tetradentate macrocyclic ligand. The complexes are characterised as distorted octahedra of the M(TML)X₂ type where M=nickel(II), cobalt(II) and copper(II); TML=tetradentate macrocyclic ligand and X=Cl, Br, NO₃ or NCS. The ligand coordinates through all the four azomethine nitrogen atoms which are bridged by acetylacetone moieties. Pyridine nitrogen does not participate in coordination, a fact supported by far i.r. studies. The magnetic, electronic and i.r. spectral studies indicate that the complexes have lower symmetries and the amounts of distortion calculated in terms of DT/DQ applying normalised spherical harmonic Hamiltonian theory indicate that these complexes are moderately distored.     

Spectroscopic studies on some azo compounds and their cobalt, copper and nickel complexes

Synthesis and characterization of [o-carboxy phenylazo] moiety of barbituric acid, thiobarbituric acid, thiouracil, citrazinic acid, and disodium chromotropate and their complexes derived from cobalt (II), nickel (II), and copper (II) salts were done. The stereochemistry and the mode of bonding of the complexes were achieved based on elemental analysis, NMR, UV-Vis, IR and ESR. The dissociation constants of the free azo ligands are evaluated by spectrophotometric methods.     

Unsymmetrical dinuclear cobalt and nickel trimethylacetate complexes

The reaction of the dinuclear complex Co₂(-OOCCMe₃)₂(²-OOCCMe₃)₂bpy₂ (1) with the polymer [Co(OH) _n (OOCCMe₃)_2–n ] _x afforded the unsymmetrical dinuclear complex bpyCo₂(₂-O,²-OOCCMe₃)(₂-O,O"-OOCCMe₃)₂(²-OOCCMe₃) (2). The reaction of 2,2"-dipyridylamine with [Co(OH) _n (OOCCMe₃)_2–n ] _x gave rise to the analogous complex [(C₅H₄N)₂NH]Co₂(₂-O,²-OOCCMe₃)(-OOCCMe₃)₂(²-OOCCMe₃) (3). The reaction of complex 1 with Ni₄(₃-OH)₂(-OOCCMe₃)₄(OOCCMe₃)₂(MeCN)₂[²-o-C₆H₄(NH₂)(NHPh)]₂ (4) produced an isostructural heterometallic analog of complex 2 with composition bpyM₂(₂-O,²-OOCCMe₃)(₂-O,O"-OOCCMe₃)₂(²-OOCCMe₃) (5) (M = Co, Ni; Co : Ni = 1 : 1) and the dinuclear heterometallic complex bpy(HOOCCMe₃)M(-OH₂)(-OOCCMe₃)₂M(OOCCMe₃)₂[o-C₆H₄(NH₂)(NHPh)] (6) (M = Co, Ni; Co : Ni = 0.15 : 1.85). Compounds 2 and 5 exhibit ferromagnetic spin-spin exchange interactions.     

Synthesis and crystal structures of four three-dimensional hybrid materials based on polyoxovanadate bridging macrocyclic copper/nickel complexes

Transition Metal Chemistry - In this research, four hybrid materials, namely [Ni(MC)]3[VO3]6·12.25H2O (1), [Cu(MC)]3[VO3]6 (2), [Ni(PC)]3[VO3]6·2H2O (3), and [Cu(PC)]3[VO3]6·2H2O (4)...     

Iron,cobalt and nickel violurate complexes

Summary The Fe^II, Fe^III, Co^II, Co^III and Ni^II violurates have been synthesised and their electronic spectra (in Nujol mulls and dimethyl formamide), i.r. spectra, magnetic properties, molar conductivity, differential thermal analysis (d.t.a.), thermogravimetric analysis (t.g.a.), elemental analysis, m.p., specific gravity and solubility have been recorded. The structures of the complexes have been inferred from magnetic and spectral data.     

Synthesis and characterization of copper and nickel complexes of LIX63 oxime

Several complexes of 5,8-diethyl-7-hydroxy-6-dodecanone oxime [H₂L] with Cu(II) and Ni(II) have been synthesized and characterized by means of a number of techniques including elemental analysis, IR spectra, magnetic susceptibility measurements, electronic absorption spectra, NMR spectra, and mass spectra. The results indicate that Cu(II) and Ni(II) generally form analogous, isomorphous complexes, although no bis-[H₂L] complex with Cu(II) has been isolated. [Cu(L)]_n and [Ni(L)]_n are oligomeric complexes with pseudo-octahedral geometry. [Ni(HL)₂] is cis-square-planar (C_2ν) with bifurcated hydrogen bridges. [Ni(H₂L)₃SO₄] and [Cu(H₂L)₃SO₄] have octahedral symmetry in which the sulphate is coordinated as a unidentate ligand and the oxime is functioning as a neutral ligand.