Emergence of atypical properties in assembled graphene nanoribbons

Graphitic nanowiggles (GNWs) are periodic repetitions of nonaligned finite-sized graphitic nanoribbon domains seamlessly stitched together without structural defects. These complex nanostructures have been recently fabricated [Cai et al., Nature (London) 466, 470 (2010)] and are here predicted to possess unusual properties, such as tunable band gaps and versatile magnetic behaviors. We used first-principles theory to highlight the microscopic origins of the emerging electronic and magnetic properties of the main subclasses of GNWs. Our study establishes a road map for guiding the design and synthesis of specific GNWs for nanoelectronic, optoelectronic, and spintronic applications.     

中空Ag纳米球壳的制备及性能表征

 以改性聚苯乙烯微球为模板,采用化学镀法在聚苯乙烯微球表面包覆一层银,在四氢呋喃溶液中将聚苯乙烯微球溶解,得到中空Ag纳米球壳。采用扫描电镜、透射电镜和X射线衍射仪对样品进行了表征及分析,并用紫外可见分光光度计研究了粒子的光学性质。实验结果表明：运用此法成功地制备出中空Ag纳米球壳的内径为250 nm,壁厚约为15 nm,并且成功地使纳米粒子的紫外吸收光谱由600 nm红移至900 nm左右,实现了在可见光至近红外光区调节Ag纳米结构的吸收峰。     

中空Ag纳米球壳的制备及性能表征

以改性聚苯乙烯微球为模板,采用化学镀法在聚苯乙烯微球表面包覆一层银,在四氢呋喃溶液中将聚苯乙烯微球溶解,得到中空Ag纳米球壳。采用扫描电镜、透射电镜和X射线衍射仪对样品进行了表征及分析,并用紫外可见分光光度计研究了粒子的光学性质。实验结果表明：运用此法成功地制备出中空Ag纳米球壳的内径为250 nm,壁厚约为15 nm,并且成功地使纳米粒子的紫外吸收光谱由600 nm红移至900 nm左右,实现了在可见光至近红外光区调节Ag纳米结构的吸收峰。     

镍锰铁氧体纳米线阵列的制备与表征

采用真空负压灌注技术, 结合溶胶-凝胶法在多孔氧化铝模板的纳米孔洞中成功制备了平均直径为80 nm左右的Ni_{1- x}Mn_xFe₂O₄(x=0, 0.25, 0.5, 0.75) 纳米线阵列. XRD结果显示所制备的纳米线阵列为立方尖晶石结构, SEM和TEM的结果表明纳米线是由大量不同晶体取向的亚微晶粒联接组成. 磁测量结果显示, 随着Mn掺杂浓度的增加, 饱和磁化强度先增加而后减小, 这种变化与离子在尖晶石结构中的替代、占位变化有关. 相比于块体材料的NiFe₂O₄, 由于非线性磁结构比例的增加, 导致了线体NiFe₂O₄的饱和磁化强度降低.     

Preparation and characterization of hydrophobic magnetite microspheres by a simple solvothermal method

Superparamagnetic magnetite microspheres with a hydrophobic surface were successfully prepared through a simple solvothermal method based on hydrolysis of iron-oleate complex in diphenyl ether in the presence of oleic acid as the ligands. The microspheres size and size distribution were analyzed by a laser diffraction particle size analyzing method using ZETASIZER. The morphology and crystalline structure of the products were characterized using transmitting electron microscopy (TEM), scanning electron microscopy (SEM), X-Ray diffraction (XRD), and the magnetic property was studied by a Quantum Design MPMS SQUID. TEM and SEM images showed that as-prepared spherical nanostructures are of about 140 nm in sizes, which self-assembled by many 10 nm primary magnetic nanoparticles. The XRD analysis revealed that the magnetic microspheres are composed of magnetite. The magnetic measurements demonstrated that the spherical nanostructures are superparamagnetic at room temperature with no magnetic remanence and coercive force. In addition, the microspheres can be well dispersed in various non-polar solvents due to their surfaces capped of hydrophobic surfactants in situ.     

Synthesis,characterization, and electrochemical performances of alpha nickel hydroxide by coprecipitating Sn2+

Ionics - Sn-substituted α-Ni(OH)2 for Ni-MH battery is prepared by supersonic coprecipitating method, using NiSO4 as nickel ion source and SnSO4 as doping material. The crystal structure and...     

Preparation of nickel hydroxide nanorods/nanotubes and microscopic nanorings under hydrothermal conditions

A new kind of structure nickel hydroxide nanorods/nanotubes and nanorings were prepared using hydrothermal conditions at 180°C. The structures of the products were characterized using X-ray diffractometer. The morphologies were observed using transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The results show the nanorods/nanotubes were about 40–60 nm in diameter, several micrometer in length. The inner diameters of the nanotubes and nanorings were all around 20 nm. The formation mechanism of the nanorings was discussed.     

Preparation and characterization of magnetic P(St-co-MAA-co-AM) microspheres

In this study, magnetic polymer-coated microspheres were prepared by the microemulsion polymerization of styrene (St), methacrylic acid (MAA), acryamide (AM) in the presence of emulsifiers with the size of 1–5 μm. The magnetic material (i.e. Fe₃O₄) coated with oleic acid used in the preparation of the microspheres was synthesized in a classical co-precipitation procedure. The morphological and magnetic properties of the microspheres were investigated by different techniques (i.e. TEM, TGA, optical microscopy, vibrating sample magnetometer). The results indicated that the magnetic microspheres were superparamagnetic, well shaped spheres, mono-dispersed with abundant functional groups on the surfaces of the magnetic microspheres and good thermal stability. The microspheres could be linked well with the avidin and FITC antibody.     

Preparation and microwave characterization of submicrometer-sized hollow nickel spheres

The hollow structural submicrometer-sized nickel spheres were successfully fabricated by the autocatalytic reduction method. Because of the metallic and ferromagnetic behaviour of the nickel spheres, the low-density microspheres could obtain high dielectric constant and magnetic loss in microwave frequencies. The abrupt variation of the real part and the sharp peaks of the imaginary part of permittivity and permeability were observed for the micrometer-sized and nanometer-sized nickel hollow spheres. Reflection loss less than −25 dB were predicted over 11 GHz with a thickness of 1.5–2.0 mm.     

Chitosan magnetic microspheres for technological applications: Preparation and characterization

One of the major applications of chitosan and its many derivatives are based on its ability to bind strongly heavy and toxic metal ions. In this study chitosan magnetic microspheres have been synthesized. Acetic acid (1%w/v) solution was used as solvent for the chitosan polymer solution (2%w/v) where magnetite nanoparticles were suspended in order to obtain a stable ferrofluid. Glutaraldehyde was used as cross-linker. The magnetic characteristic of these materials allows an easy removal after use if is necessary. The morphological characterization of the microspheres shows that they can be produced in the size range 800–1100 μm.The adsorption of Cu(II) onto chitosan–magnetite nanoparticles was studied in batch system. A second-order kinetic model was used to fit the kinetic data, leading to an equilibrium adsorption capacity of 19 mg Cu/g chitosan.     

Synthesis and characterization of stable Co and Cd doped nickel hydroxide nanoparticles for electrochemical applications

The present paper describes the physical-chemical characterization and electrochemical behavior of a new nanomaterial formed by the addition of cadmium and cobalt atoms into the structure of nickel hydroxide nanoparticles, these ones synthesized by an easy sonochemical method. Particles of about 5nm diameter were obtained and characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction and Raman spectroscopy. Different nickel hydroxide nanoparticles were immobilized onto transparent conducting substrates by using electrostatic layer-by-layer providing thin films at the nanoscale and the electrochemical behavior was investigated. The formation of a mixed hydroxide was corroborated by observation of very interesting properties as redox potential shifting to less positive potentials and high stability when submitted to long electrochemical cycling or high times of ultrasonic synthesis, suggesting practical applications.     

Preparation and characterization of nickel nanoparticles in different carbon matrices

Using the solid-phase pyrolysis and chemical vapor deposition of nickel-phthalocyanine, we have fabricated ferromagnetic Ni nanoparticles in carbon matrices. The composition, structure, morphology, and magnetic properties of samples were investigated by means of scanning electron microscopy, energy dispersive X-ray microanalysis, X-ray diffraction technique, and ferromagnetic resonance. It is shown that the sizes of nanoparticles can be varied from ∼10 nm to ∼500 nm depending on the temperature and time of pyrolysis. The used method allows us to synthesize metal nanoparticles in different carbon matrices: in amorphous carbon plates, in graphitic capsules, and in carbon nanotubes.     

Preparation and structural characterization of zwitterionic surfactant intercalated into NiZn-layered hydroxide salts

Three zwitterionic surfactants, dodecyl dimethyl carboxylbetaine (DCB), dodecyl dimethyl sulfobetaine (DSB) and N-dodecyl-β-aminoprpionate (DAP), intercalated into NiZn-layered hydroxide salts (NZL-DCB, NZL-DSB and NZL-DAP) were synthesized by the coprecipitation method. The effect of surfactant content, pH, temperature and time of hydrothermal treatment on preparation was investigated and discussed. The NZL-DCB, NZL-DSB and NZL-DAP were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry analysis and differential thermal analysis (TGA/DTA). The results showed that basal spacings of NZL-DCB, NZL-DSB and NZL-DAP were around 3.45, 3.68 and 3.94 nm, respectively. DCB, DSB and DAP probably form an overlapped bilayer in the gallery. TGA/DTA data indicated that NZL-DCB, NZL-DSB and NZL-DAP displayed three loss weight stages: loss of adsorbed and structural water, dehydroxylation of matrix and decomposition of nitrate ions, decomposition and combustion of surfactants. Furthermore, chemical analysis data, BET surface area and scanning electron microscopic (SEM) were also measured and analyzed.     

Fabrication of novel Cu microspheres assembled with nanoparticles by a solvothermal reduction route

Copper microspheres assembled with nanoparticles have been synthesized by a simple solvothermal route at 160 °C for 24 h. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDX), transmission electron microscopy (TEM) and electron diffraction (ED) techniques. The results show that the diameters of the microspheres range from 2 to 4 μm. The formation mechanism of the morphology control over the copper microspheres assembled by nanoparticles was investigated; the use of polyvinylpyrrolidone (PVP) as the surfactant and the choice of N,N-dimethylformamide (DMF) as the reducing agent were found to be important for the final generation of copper microspheres.     

Synthesis and characterization of cadmium hydroxide nano-nest by chemical route

A facile chemical route based on room temperature chemical bath deposition (CBD) was developed to deposit the Cd(OH)₂ nano-nest. The growth mechanism follows two-stage crystallization with initial growth of nucleation centers, followed by subsequent anisotropic growth. The nano-nest morphological evolution of Cd(OH)₂ on different substrates has been carried out. These films have been characterized by the techniques; such as X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), optical absorption, contact angle measurement and thermoelectric power (TEP) measurements. The X-ray diffraction study revealed that the as deposited film consists of cadmium hydroxide (Cd(OH)₂) phase. The nano-nest consisted of wires with nearly uniform in dimensions, with diameter around 30 nm and length of few microns. As-deposited Cd(OH)₂ film used in this study showed water contact angle of 66°. The optical bandgap was found to be 3.2 eV, with n-type electrical conductivity as confirmed from thermo-emf measurements.     

Preparation of magnetite–dextran microspheres by ultrasonication

An improved method of preparing magnetite–dextran microspheres by ultrasonication is proposed. Several parameters were evaluated and the characteristics of the microspheres investigated by scanning electron microscope (SEM), atomic force microscope (AFM), particle size analyzer and magnetometer. The results show that the initial Fe/dextran ratio is the most effective parameter for both the size and the magnetic properties.     

Synthesis and performance of nickel hydroxide nanodiscs for redox supercapacitors

Herein, we report the facile synthesis of β-Ni(OH)₂ nanodiscs by chemical precipitation method and their use in supercapacitors. β-Ni(OH)₂ nanodiscs are characterized by FTIR, XRD, FESEM, XPS and TGA analysis. Morphological analysis revealed the uniform nanodisc morphology of β-Ni(OH)₂. The supercapacitor behavior is evaluated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy measurements in 1-M aqueous KOH solution with 0- to 0.6-V potential window. The specific capacitance of β-Ni(OH)₂ nanodiscs is found to be 400 F g⁻¹. The energy and power densities of the β-Ni(OH)₂ nanodiscs are found to be 7.15 W h kg⁻¹ and 1716 W kg⁻¹, respectively, at the current density of 1 A g⁻¹. The cycle life test shows the good stability of the electrode with 83 % retention capacitance even after 1500 cycles.

     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

Synthesis, characterization and photoluminescence of tin oxide nanoribbons and nanowires

In this work we report the successful formation of tin oxide nanowires and tin oxide nanoribbons with high yield and by using simple cheap method. We also report the formation of curved nanoribbon, wedge-like tin oxide nanowires and star-like nanowires. The growth mechanism of these structures has been studied. Scanning electron microscope was used in the analysis and the EDX analysis showed that our samples is purely Sn and O with ratio 1:2. X-ray analysis was also used in the characterization of the tin oxide nanowire and showed the high crystallinity of our nanowires. The mechanism of the growth of our1D nanostructures is closely related to the vapor–liquid–solid (VLS) process. The photoluminescence PL measurements for the tin oxide nanowires indicated that there are three stable emission peaks centered at wavelengths 630, 565 and 395 nm. The nature of the transition may be attributed to nanocrystals inside the nanobelts or to Sn or O vacancies occurring during the growth which can induce trapped states in the band gap.