Fabrication of PbS Nanoparticles Embedded in Silica Gel by Reverse Micelles and Sol-Gel Routes

PbS doped-silica gels showing a visible absorption onset were prepared by the sol-gel method. PbS nanoparticles with strong quantum-confinement effect were obtained from sodium sulfide and lead nitrate by the reverse micelle method. Chemical parameters such as the water/surfactant and the [Pb²⁺]/[S²⁻] ratios play a very important role in the PbS particle size and in their absorption threshold. The PbS nanoparticles were dispersed in a hydrolyzed solution of TEOS and converted to homogeneous gels after heating. The absorption threshold of PbS doped-gel is blue shifted compared to the one of the as-prepared PbS particles. The non-linear optical properties of the PbS nanoparticle solution were measured by degenerate four-wave mixing and theX ⁽³⁾ value was estimated to be 1.95 10⁻¹¹ esu.     

Controlled Synthesis of Hollow PbS‐TiO2 Hybrid Structures through an Ion Adsorption–Heating Process and their Photocatalytic Activity

Hollow hybrid nanostructures have received significant attention because of their unique structural features. This study reports a facile ion adsorption–heating method to fabricate hollow PbS‐TiO₂ hybrid particles. In this method, the TiO₂ spheres used as a substrate material to grow PbS are aggregates of many small amorphous TiO₂ particles, and each small particle is covered with thioglycolic acid ligands through Ti⁴⁺–carboxyl coordination. When Pb²⁺ ions are added to a colloidal solution of these TiO₂ spheres, these ions are adsorbed by sulfhydryl (‐SH) groups to form metal thiolates, and the C−S bond is dissociated by heating to release S²⁻. The S²⁻ ions react with Pb²⁺ ions to form PbS without additive sulfur sources. Additionally, the amorphous TiO₂ spheres are transformed into the anatase phase during the heating process. As a result, the crystallization of TiO₂ spheres along with the formation of PbS is simultaneously carried out by heating. During the heating process, owing to the Kirkendall effect of S²⁻ diffusion and the Ostwald ripening effect of the crystallization of amorphous TiO₂ spheres, PbS‐TiO₂ hollow hybrid structures can be obtained. The XRD and XPS characterizations proved the formation of anatase TiO₂ and PbS. The TEM characterization confirmed the formation of hollow structures in the PbS‐TiO₂ hybrid sample. The photocatalytic activity of the hollow PbS‐TiO₂ hybrid spheres have been investigated for the degradation of Cr⁶⁺ under visible light. The results show that hollow PbS‐TiO₂ hybrid spheres exhibited the highest photocatalytic activity, in which almost all the Cr⁶⁺ was degraded after 140 min.     

Sonochemical synthesis of mass single-crystal PbS nanobelts

Based on sonochemical technique, large-scale PbS nanobelts are successfully synthesized in the mixed solution of PbCl₂ and Na₂S₂O₃. These nanobelts are characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), selected area electronic diffraction, energy dispersive X-ray spectroscopy, and high-resolution TEM. The as-synthesized PbS nanobelts have width of about 80 nm, length up to several millimeters, and width-to-thickness ratio of about 5. In addition, the growth mechanism of PbS nanobelts is suggested.     

A label-free colorimetric detection of lead ions by controlling the ligand shells of gold nanoparticles

We have developed a simple, colorimetric and label-free gold nanoparticle (Au NP)-based probe for the detection of Pb²⁺ ions in aqueous solution, operating on the principle that Pb²⁺ ions change the ligand shell of thiosulfate (S₂O₃²⁻)-passivated Au NPs. Au NPs reacted with S₂O₃²⁻ ions in solution to form Au⁺·S₂O₃²⁻ ligand shells on the Au NP surfaces, thereby inhibiting the access of 4-mercaptobutanol (4-MB). Surface-assisted laser desorption/ionization time-of-flight ionization mass spectrometry (SALDI-TOF MS) and inductively coupled plasma mass spectrometry (ICP-MS) measurements revealed that PbAu alloys formed on the surfaces of the Au NPs in the presence of Pb²⁺ ions; these alloys weakened the stability of the Au⁺·S₂O₃²⁻ ligand shells, enhancing the access of 4-MB to the Au NP surfaces and, therefore, inducing their aggregation. As a result, the surface plasmon resonance (SPR) absorption of the Au NPs red-shifted and broadened, allowing quantitation of the Pb²⁺ ions in the aqueous solution. This 4-MB/S₂O₃²⁻-Au NP probe is highly sensitive (linear detection range: 0.5-10 nM) and selective (by at least 100-fold over other metal ions) toward Pb²⁺ ions. This cost-effective sensing system allows the rapid and simple determination of the concentrations of Pb²⁺ ions in real samples (in this case, river water, Montana soil and urine samples).     

Synthesis and Characterization PbS and Bi2S3 Nanostructures via Microwave Approach and Investigation of Their Behaviors in Solar Cell

PbS and Bi₂S₃ nanostructures were synthesized successfully via a microwave approach. For synthesis of PbS nanoparticles, a new precursor, [bis(salisylate) lead (ΙΙ)]; [Pb(Hsal)₂] was used. The products were characterized by X-ray diffraction, scanning electron microscopy, and photoluminescence spectroscopy. Thin film of Bi₂S₃ was prepared by doctor’s blade technique and solar cell made from ITO/Bi₂S₃/PbS/Pt layers. I–V characterization was investigated for this cell and fill factor, open circuit voltage and short circuit current values were obtained.     

Fabrication and magnetic properties of FePt nanoparticle assemblies embedded in MgO-matrix systems

Hydrophilic FePt nanoparticles (NPs) have been embedded into the MgO-matrix systems via a sol–gel process to prevent FePt NPs from aggregating and sintering during the heat-treatment process required for the L1₀ ordering. The chemically ordered L1₀-phase FePt can be obtained after annealing at 700 °C for 60 min in atmosphere containing H₂. The effect of the pH value of MgO collosol and FePt nanocrystal loading amount on the structure, morphology, and magnetic properties of FePt/MgO nanocomposites has been investigated. The neutral pH value of 7 in MgO sol is beneficial to stabilize FePt NPs and obtain higher chemical ordering parameter S for the face-centered tetragonal -FePt/MgO nanocomposites with larger coercivity. The FePt NPs loading amount also plays a key role in tuning the microstructure and magnetic properties of the nanocomposites. The relatively higher FePt NPs loading with FePt/MgO molar ratio (R_FM) of 1:2 leads to relatively perfect hexagonal assembly and pure L1₀ phase. When the R_FM is 1:5 and 1:10, the MgO-matrix in nanocomposites causes the Fe element loss in FePt NPs along with formation of secondary phases such as magnesioferrite or Pt₃Fe during the annealing process. Under optimal processing of neutral pH value of 7 and R_FM of 1:2, the presence of MgO matrix produces more homogeneous microstructures and better magnetic properties with higher room-temperature coercivity (H _C = 4.65 kOe).     

Enhanced Immunosensor Using a Handheld pH Meter for the Point-of-Care,Sensitive Detection of Prostate Specific Antigen

An enhanced handheld pH meter based immunosensor was proposed for point-of-care, quantitative determination of prostate specific antigen (PSA). Monoclonal antibody-functionalized magnetic beads (MB-Ab₁) were prepared to capture PSA in sample, and subsequently bond to polyclonal antibody-immobilized gold nanoparticles-polyamide-amine dendrite-lead ion (GO-PAMAM-Pb²⁺) and dispersed in H₂S solution. Based on negative Gibbs free energy of formation, PbS (solubility product constant K_sp=8.0×10⁻²⁸ was formed by reaction of Pb²⁺ and H₂S. Hence, the pH of solution increased due to the H⁺ appeared, and the resulting pH value was monitored by a handheld pH meter.     

Visible‐Light Photocatalytic Hydrogen Production Activity of ZnIn2S4 Microspheres Using Carbon Quantum Dots and Platinum as Dual Co‐catalysts

ZnIn₂S₄ microspheres (ZIS MSs) were for the first time decorated with carbon quantum dots (CQDs) and platinum nanoparticles (NPs) as dual co‐catalysts of for photocatalytic H₂ production. The ZIS MSs co‐loaded with CQDs and Pt exhibited a high photocatalytic H₂ production rate of 1032.2 μmol h^?1 g^?1 with an apparent quantum efficiency of 2.2 % (420 nm) in triethanolamine aqueous solution under visible‐light irradiation, which was much higher than the respective photocatalytic rates of pure ZIS, Pt loaded ZIS, and CQDs‐decorated ZIS. Such a great enhancement was attributed to the integrative effect of good crystallization, enhanced light absorption, high electrical conductivity of CQDs, and the vectorial electron transfer from ZIS to CQDs and Pt NPs (ZIS→CQDs→Pt).     

Silica Meets Tannic Acid: Designing Green Nanoplatforms for Environment Preservation

Hybrid tannic acid-silica-based porous nanoparticles, TA-SiO₂ NPs, have been synthesized under mild conditions in the presence of green and renewable tannic acid biopolymer, a glycoside polymer of gallic acid present in a large part of plants. Tannic acid (TA) was exploited as both a structuring directing agent and green chelating site for heavy metal ions recovery from aqueous solutions. Particles morphologies and porosity were easily tuned by varying the TA initial amount. The sample produced with the largest TA amount showed a specific surface area an order of magnitude larger than silica nanoparticles. The adsorption performance was investigated by using TA-SiO₂ NPs as adsorbents for copper (II) ions from an aqueous solution. The effects of the initial Cu²⁺ ions concentration and the pH values on the adsorption capability were also investigated. The resulting TA-SiO₂ NPs exhibited a different adsorption behaviour towards Cu²⁺, which was demonstrated through different tests. The largest adsorption (i.e., ~50 wt% of the initial Cu²⁺ amount) was obtained with the more porous nanoplatforms bearing a higher final TA content. The TA-nanoplatforms, stable in pH value around neutral conditions, can be easily produced and their use would well comply with a green strategy to reduce wastewater pollution.     

Cofluorescence of dyes in nanoparticles from metal ion complexes with diketones

Nanoparticles (NPs) from diketonates of Al³⁺, Sc³⁺, In³⁺ and Ln³⁺ doped with dye molecules are synthesized. The appearance of sensitized fluorescence (cofluorescence) of dye molecules due to energy transfer from the ensemble of complexes forming NPs is revealed in aqueous solutions of these NPs. It is shown that the dye cofluorescence in NPs from Eu complexes occurs as a result of two distinct processes of energy transfer (ET) to dye molecules: from singlet levels of ligands and from Eu³⁺ ions. It is found that the efficiency of ET from Eu³⁺ ions to dyes in NPs from Eu(DBM)₃phen is one order of magnitude higher than the efficiency of ET from S₁-levels of ligands to dyes in NPs from Al complexes with the same ligands. It is shown that the excitation of dye molecules through ligands of NPs results in the enhancement of the intensity of their fluorescence by a factor of 1.5–2 orders of magnitude compared to the excitation of their own first band of absorption.     

Adsorption of acid red 114 and reactive black 5 in aqueous solutions on dendrimer‐conjugated magnetic nanoparticles

The adsorption of the dyes Acid Red 114 and Reactive Black 5 in aqueous solutions on polyhydroxyl dendrimer magnetic nanoparticles (Fe₃O₄@SiO₂‐TRIS) was studied in a batch system. The Fe₃O₄@SiO₂‐TRIS NPs were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Experiments were performed under different conditions such as the initial dye concentration, adsorbent dose, and pH. The pseudo‐second‐order model provided a very good fit for the two anionic dyes. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherms at different temperatures, and the former agreed very well with the experimental data. However, the adsorption capacity of Fe₃O₄@SiO₂‐TRIS NPs was reduced during surface modification, which could be due to the dye occupying the binding sites of the dendrimer. Thermodynamic parameters, namely the change in free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰), were also determined.     

An investigation of the sulphur(−II)/sulphur(0) system on bold electrodes

Sulphur deposited on gold by the anodic oxidation of sulphur(−II) species in solution has been studied by X-ray photoelectron spectroscopy. The initial layer behaved as gold sulphide. Multilayers of sulphur had a lower volatility and a smaller electron binding energy than bulk elemental sulphur, indicating that there is interaction with the underlying gold or gold sulphide.The anodic oxidation of sulphur(−II) to sulphur, and the reverse process, has been investigated on gold using the rotating ring disc electrode technique. Polysulphide ions were formed as intermediates in both processes. Polysulphides were also produced by chemical reaction of deposited sulphur with sulphur(−II) species in solution. The polysulphide intermediates were identified as S²⁻₅ at pH 13, a mixture of species with average stoichiometry S²⁻_3.3 at pH 9.2 and S²⁻₂, possibly HS⁻₂, at pH 6.8.     

Dissolution of lead electrode and preparation of rod-shaped PbS crystals in a novel galvanic cell

A simple galvanic cell was developed to produce rod-shaped PbS crystals with lead and gold as negative and positive electrodes. The electrolyte solution contains sodium thiosulfate, sodium sulfate, and 1-thioglycerol (TG). It was found out that lead dissolved spontaneously and produced PbS crystals in the electrolyte solution immediately after assembling the cell. Further study shows that TG catalyzes the oxidation of lead into Pb²⁺ and the reduction of thiosulfate into S²⁻. The produced rod-shaped PbS crystals are 140∼350 nm in diameter and 1∼3 μm in length after 4 h of reaction.     

Fluorescence properties of nanosized sulfides

The absorption spectra of nanosized sulfides and selenides (ZnS, CdS, CuS, Cu₂S, AgS, In₂S₃, SnS, PbS, Sb₂S₃, FeS, CoS, NiS, CdSe, and Ag₂Se) showed one absorption band with a maximum at wave-lengths shorter than 300 nm. The UV fluorescence spectra of all of these nanosized sulfides in a polyvinyl alcohol film contained maxima at 380–440 nm. Nanosized sulfides are thus characterized by a very large (up to 15000 cm⁻¹) Stokes shift of fluorescence. In a polyvinyl alcohol film, a decrease in the concentration of cadmium sulfide from 0.05 to 0.002 M led to a threefold increase in the fluorescence intensity. The dependence of the degree of fluorescence buildup on the sulfide concentration is nearly linear. An increase in sulfide concentration to more than 5 × 10⁻³ M in solution led to a complete coagulation of particles.     

UV light-assisted mineralisation and biodetoxification of Ponceau S with hydroxyl and sulfate radicals

The present study reports simultaneous mineralisation and biodetoxification of Ponceau S (3-hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium salt), an azo dye, by UV light assisted oxidation with hydroxyl and sulfate radicals. Metal ion catalysts used in the work were: Fe²⁺ and Ag⁺, and the oxidants used were: hydrogen peroxide and S₂O₈^2?. Strategies adopted to make the processes environmentally benign and economically viable by achieving maximum mineralisation in the shortest possible time are described. Mineralisation efficiency (Em) of various systems was found to follow the order: E_m(Fe²⁺/H₂O₂/UV) > E_m(Fe²⁺/S₂O₈^2?/UV) > E_m(Ag⁺/H₂O₂/UV) ≈ E_m(Ag⁺/S₂O₈^2?/UV). Thus, Fe²⁺ and HP are the most suitable metal ion catalyst and oxidant respectively, showing higher efficiency at pH 3 followed by that at pH 6.6. It is possible to enhance the Fe²⁺/H₂O₂/UV process electrical energy efficiency by maintaining the concentration of Fe at either 0.05 mM or 0.03 mM and that of the oxidant at 2.5 mM. The bioassay study revealed that the Fe²⁺/S₂O₈^2?/UV process biodetoxification efficiency is higher at pH 3 (93.7 %) followed by that at pH 6.6 (80.1 %) at the concentration of Fe ²⁺ and S₂O₈^2? of 0.03 mM and 2.5 mM, respectively. Thus, not only the concentration of Fe²⁺, but also the nature of the oxidant and pH play an important role in the biodetoxification process and S₂O₈^2? possesses higher biodetoxification efficiency than H₂O₂.     

One‐Step Synthesis of Small‐Sized and Water‐Soluble NaREF4 Upconversion Nanoparticles for In Vitro Cell Imaging and Drug Delivery

Small (2–28 nm) NaREF₄ (rare earth (RE)=Nd–Lu, Y) nanoparticles (NPs) were prepared by an oil/water two‐phase approach. Meanwhile, hydrophilic NPs can be obtained through a successful phase‐transition process by introducing the amphiphilic surfactant sodium dodecylsulfate (SDS) into the same reaction system. Hollow‐structured NaREF₄ (RE=Y, Yb, Lu) NPs can be fabricated in situ by electron‐beam lithography on solid NPs. The MTT assay indicates that these hydrophilic NPs with hollow structures exhibit good biocompatibility. The as‐prepared hollow‐structured NPs can be used as anti‐cancer drug carriers for drug storage/release investigations. Doxorubicin hydrochloride (DOX) was taken as model drug. The release of DOX from hollow α‐NaLuF₄:20 % Yb³⁺, 2 % Er³⁺ exhibits a pH‐sensitive release patterns. Confocal microscopy observations indicate that the NPs can be taken up by HeLa cells and show obvious anti‐cancer efficacy. Furthermore, α‐NaLuF₄:20 % Yb³⁺, 2 % Er³⁺ NPs show bright‐red emission under IR excitation, making both the excitation and emission light fall within the “optical window” of biological tissues. The application of α‐NaLuF₄:20 % Yb³⁺, 2 % Er³⁺ in the luminescence imaging of cells was also investigated, which shows a bright‐red emission without background noise.     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

Photo-Fenton and photo-Fenton-like processes for the degradation of methyl orange in aqueous medium: Influence of oxidation states of iron

Degradation of methyl orange (MO) was carried out by the photo-Fenton process (Fe²⁺/H₂O₂/UV) and photo-Fenton-like processes (Fe³⁺/H₂O₂/UV, Fe²⁺/S₂O₈²⁻/UV, and Fe³⁺/S₂O₈²⁻/UV) at the acidic pH of 3 using hydrogen peroxide and ammonium persulfate (APS) as oxidants. Oxidation state of iron had a significant influence on the efficiency of photo-Fenton/photo-Fenton-like processes. It was found that a process with a source of Fe³⁺ ions as the catalyst showed higher efficiency compared to a process with the Fe²⁺ ion as the catalyst. H₂O₂ served as a better oxidant for both oxidation states of iron compared to APS. The lower efficiency of APS is attributed to the generation of excess protons which scavenges the hydroxyl radicals necessary for degradation. Further, the sulfate ions produced from S₂O₈²⁻ form a complex with Fe²⁺/Fe³⁺ ions thereby reducing the concentration of free iron ions in the solution. This process can also reduce the concentration of hydroxyl radicals in the solution. Efficiency of the various MO degradation processes follows the order: Fe³⁺/H₂O₂/UV, Fe³⁺/APS/UV, Fe²⁺/H₂O₂/UV, Fe²⁺/APS/UV.     

Preparation and Characterization of GCE Coatings Combining DDDMAB and PDADMAC with FAD and HCM for Electrocatalytic Detection of Oxygen and Sulfur Oxoanions

Electrochemically active hybrid coatings based on cationic films, didodecyldimethylammonium bromide (DDDMAB), and poly(diallyldimethylammonium chloride) (PDADMAC) are prepared on glassy carbon electrode surface by cycling the film‐covered electrode repetitively in a pH 7 solution containing flavin adenine dinucleotide (FAD), and anionic hexacyanometalate (HCM) complexes, Fe(CN)₆^3? and Ru(CN)₆^4?. Cyclic voltammetric features of hybrid coatings resemble that of electron transfer process of surface‐confined redox species. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the deposition of FAD on DDDMAB film. Cyclic voltammetric peak potentials of modified electrode were found to be shifted to more negative region with increasing pH of contacting solution with a slope value of 63.3mV per pH unit. The electrocatalytic behavior of FAD‐modified DDDMAB‐coated GCE and hybrid film electrodes was tested towards reduction of oxygen, S₂O₈^2?, SO₅^2? and oxidation of SO₃^2?. The application of FAD‐modified DDDMAB‐coated GCE for S₂O₈^2? estimation was demonstrated in amperometric mode. The sensitivity and detection limit (S/N=3) were 267.6 μA mM^?1 and 2×10^?6 M, respectively.     

Solvolysis of 4-acyloxy-3-nitrobenzoic acid substrates catalyzed by polyethylenimine derivatives

The solvolytic reactions of anionic activated esters (S_n^?) catalyzed by dodecane-block-poly[ethylenimine-graft-4(5)-methylimidazole] and related model compounds were investigated. Hydrolysis of 4-acetyl-3-nitrobenzoic acid (S₂^?) as a function of pH suggested that electrostatic interactions are operative only in the higher molecular weight polymers. Apolar interactions were evident from the greater catalytic rates observed for the hydrolysis of a series of 4-acetoxy-3-nitrobenzoic acid substrates (S_n^?). The largest rate enhancements were reflected by catalysts that make effective use of the electrostatic interaction and also provide an apolar binding site. Dodecane-block-poly[ethylenimine-graft-4(5)-methylimidazole], with a DP = 85, catalyzed hydrolysis of S_n^?(n = 2, 4, and 7), in excess substrate, exhibited saturation kinetics and followed a simple Michaelis-Menten-type mechanism. Inhibition of the catalyst in the hydrolysis of S₁₂^? was observed and can be rationalized by analogy to certain multisite enzymatic reactions.