Quantum-chemical modeling of the hydrogen spillover effect in the H/Pt/SnO<Subscript>2</Subscript> system

The hydrogen migration over the surface of platinum clusters applied to the tin dioxide crystal surface has been modeled by the density functional theory method within the generalized gradient approximation (GGA) under periodic conditions using a projector-augmented plane-wave (PAW) basis set with a pseudopotential. It has been demonstrated that the dissociative adsorption energy of a hydrogen molecule onto the Pt₁₉ cluster surface is 1.6 eV. The movement of the hydrogen atom over the cluster surface is ∼0.4 eV more favorable than in the bulk. The location of the hydrogen atom on the SnO₂ substrate is 1.62 eV more favorable than that on the upper face of the Pt₁₉ cluster. The barriers to migration of hydrogen atom over the surface of the platinum cluster applied to the SnO₂ surface are within 0.1–0.2 eV.     

Effect of Bimetallic Pd/Pt Clusters on the Sensing Properties of Nanocrystalline SnO<Subscript>2</Subscript> in the Detection of CO

Nanocrystalline tin dioxide modified by Pd and Pt clusters or by bimetallic PdPt nanoparticles was synthesized. Distribution of the modifers on the SnO₂ surface was studied by high-resolution transmission electron microscopy and energy dispersive X-ray microanalysis with element distribution mapping. It was shown that the Pd/Pt ratio in bimetallic particles varies over a broad range and does not depend on the particle diameter. The effect of platinum metals on the reducibility of nanocrystalline SnO₂ by hydrogen was determined. The sensing properties of the resulting materials towards 6.7 ppm CO in air were estimated in situ by electrical conductivity measurements. The sensor response of SnO₂ modified with bimetallic PdPt particles was a superposition of the signals of samples with Pt and Pd clusters.     

Interaction of dioxygen with the platinum Pt19/SnO2/H2 cluster: DFT calculation

The adsorption of the O₂ molecule onto the surface of the Pt₁₉ platinum cluster deposited onto the tin dioxide crystal surface in the presence of dissociated hydrogen molecule has been calculated by the density functional theory method within the generalized gradient approximation (GGA-PBE) with periodic boundary conditions and a projector-augmented plane-wave (PAW) basis set. It has been demonstrated that the oxygen molecule can be adsorbed without a barrier onto the free surface of the Pt₁₉/SnO₂/H₂ cluster to form a superoxy isomer with one Pt-O bond (the energy of elimination of the oxygen molecule is 0.75 eV), which converts almost without a barrier to more stable peroxide isomers with two Pt-O bonds (the energy of elimination of the O₂ molecule is 1.2?1.7 eV). The energy of elimination of the oxygen molecule from the isomers with two-coordinated oxygen positions at the cluster edges is 2.10?2.53 eV. The isomers with mono- and tricoordinated oxygen positions are less energetically favorable than the isomers with two-coordinated oxygen positions. The process of addition of the oxygen molecule to the platinum cluster and elimination of the water molecule formed in the reaction Pt₁₉/SnO₂/H₂ + O₂ → Pt₁₉/SnO₂/O + H₂O is energetically favorable by 1.6 eV.     

Study of <Emphasis Type="Italic">n</Emphasis>-hexane isomerization on Pt/SO<Subscript>4</Subscript>/ZrO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Effect of the state of platinum on catalytic and adsorption properties

The state of surface Pt atoms in the Pt/SO₄/ZrO₂/Al₂O₃ catalyst and the effect of the state of platinum on its adsorption and catalytic properties in the reaction of n-hexane isomerization were studied. The Pt-X/Al₂O₃ alumina-platinum catalysts modified with various halogens (X = Br, Cl, and F) and their mechanical mixtures with the SO₄/ZrO₂/Al₂O₃ superacid catalyst were used in this study. With the use of IR spectroscopy (CO_ads), oxygen chemisorption, and oxygen-hydrogen titration, it was found that ionic platinum species were present on the reduced form of the catalysts. These species can adsorb to three hydrogen atoms per each surface platinum atom. The specific properties of ionic platinum manifested themselves in the formation of a hydride form of adsorbed hydrogen. It is believed that the catalytic activity and operational stability of the superacid system based on sulfated zirconium dioxide were due to the participation of ionic and metallic platinum in the activation of hydrogen for the reaction of n-hexane isomerization.     

XPS and XANES studies of SnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanolayers

This paper presents the results of our XPS (X-ray photoelectron spectroscopy) and XANES (X-ray absorption near edge structure) studies of tin oxide nanolayers obtained by magnetron spraying of the metal and its further oxidation in air at different temperatures. It was shown that at 240°C (annealing temperature), tin monoxide was dominant in the surface layer of the samples. When the temperature was increased to 450°C, the phase composition corresponded to tin dioxide. Increased sorption ability was found for the samples oxidized at 450°C. The band structure model of SnO _x nanolayers obtained by superposition of the XANES and XPS data revealed cross transitions with energy ～3.7 eV in the presence of the SnO and SnO₂ phases. Surface doping of nanolayers with palladium gave the Pd, PdO, and PdO₂ components, among which PdO was most intense. Alternate treatments with O₂ and H₂ gases led to the disappearance of palladium dioxide and the reduction of PdO to the Pd metal. After the volume doping of nanoplayers with palladium, the surface layer contained PdO and PdO₂; the latter was represented by two types of particles with different sizes.     

Template-free synthesis of hierarchical porous SnO<Subscript>2</Subscript>

Hierarchical porous tin dioxide has been successfully prepared through a fast one-pot template-free synthesis route. The boiling of the mixture of alcohol and glycerol can be utilized to generate nanopores in the SnO₂ monolith. Polycrystalline hierarchical SnO₂ with well proportioned composition has also been obtained in the pore walls of tin dioxide.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Conductivity of SnO<Subscript>2</Subscript>-In<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystalline composite films

The conductivity of films consisting of a mixture of SnO₂ and In₂O₃ nanocrystals at 200–500°C was studied. Based on the experimental data, it was assumed that in films containing less than 20 wt % In₂O₃, the current flows along SnO₂ nanocrystals. A model of conductivity in these films is presented; it includes an electron transfer from In₂O₃ to SnO₂, which forms positively charged In₂O₃ nanocrystals that contact the negatively charged SnO₂ nanocrystals. In the presence of In₂O₃ nanocrystals, the activation energy of the electron transfer between SnO₂ nanocrystals decreased substantially because of a decrease in the barrier of electron transfer between SnO₂ crystals under the action of the negative charge. As a result, a percolation cluster of charged SnO₂ crystals formed. At high contents of In₂O₃ (over 20 wt %), the conductivity increased dramatically. The curve of the temperature dependence of conductivity changed because of the appearance of a percolation cluster of In₂O₃ nanocrystals, in which the current passed. The conductivity of a mixed film of this kind differed from that of the nanocrystalline film of pure In₂O₃.     

Study on the service life and deactivation mechanism of Ti/SnO<Subscript>2</Subscript>-Sb electrode by physical and electrochemical methods

The Sb doped tin dioxide electrode (Sb-doped SnO₂) inter-layer was prepared using electroposition layer-by-layer onto a titanium plate, and the Sb-doped SnO₂ surface catalytic layer (Ti/SnO₂-Sb) was prepared using thermo-decomposition method. Accelerated service life tests were carried out in 0.5 M H₂SO₄ solution and 1.0 M NaOH solution, respectively. The deactivation mechanism of the electrodes is studied using oxygen evolution reaction (OER) as the reaction mode. Cyclic voltammetry test showed that the electrodes after accelerated life tests had no catalytic-oxidizing activity upon phenol. Electrochemical impedance spectroscopy (EIS) analysis exhibited that the membrane resistance of the deactivated electrode increases obviously in 0.5 M H₂SO₄ solution and 1.0 M NaOH solution, with the values of 1231 and 90.6 Ω, respectively. The structure, morphology and the content of the fresh and deactivated electrode were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray detector (EDX). This suggested that the Ti content on the electrode surface increases after deactivation, and TiO₂ membrane with poor conductivity is grown on the electrode surface.     

Quantum chemical study of H<Subscript>2</Subscript> adsorption on Pd<Subscript>21</Subscript> cluster

Modeling of the interaction of an H₂ molecule with the surface of the Pd₂₁ cluster in different spin states was performed using the DFT/PBE scalar relativistic approximation. The spin multiplicity of the system significantly affects the mechanism of adsorption, its parameters, and migration of hydrogen atoms. The H atoms can migrate over the cluster surface with low barriers (1.6 kcal mol^–1). The complex with C _2v symmetry, wherein the H atoms occupy adjacent fcc sites, is the most energetically stable.     

[Ca(BH<Subscript>4</Subscript>)<Subscript>2</Subscript>]<Subscript> <Emphasis Type="Italic">n</Emphasis> </Subscript> clusters as hydrogen storage material: A DFT study

Calcium borohydride is widely studied as a hydrogen storage material. However, investigations on calcium borohydride from a cluster perspective are seldom found. The geometric structures and binding energies of [Ca(BH₄)₂]_n (n = 1–4) clusters are determined using density function theory (DFT). For the most stable structures, vibration frequency, natural bond orbital (NBO) are calculated and discussed. The charge transfer from (BH₄) to Ca was observed. Meanwhile, we also study the LUMO–HOMO gap (E_g) and the B–H bond dissociation energies (BDEs). [Ca(BH₄)₂]₃ owns higher E_g, revealing that trimer is more stable than the other forms. Structures don’t change during optimization after hydrogen radical removal, showing that calcium borohydride could possibly be used as a reversible hydrogen storage material. [Ca(BH₄)₂]₄ has the smallest dissociation energy suggesting it releases hydrogen more easily than others.     

The optical and gas-sensitive properties of opal-like structures based on SnO<Subscript>2</Subscript>

Opal-like materials based on tin dioxide were prepared, and their structural and sensor characteristics were studied. The optical transmission spectra of opal-like structures based on SnO₂ were recorded, and the volume fraction occupied in them by tin dioxide was estimated. It was shown that structures based on SnO₂ contained a photon stop-zone in the visible spectrum range. The sensor properties of the materials toward CO and H₂ were studied over the temperature range 375−425°C. The SnO₂ samples studied had much higher sensitivity to CO compared with SnO₂ materials without opal-like structures.     

Effect of titanium,antimony, and ruthenium doping on tin dioxide adsorption properties. Quantum-chemical modeling

The influence of the composition of oxides supports on the specific electroactive surface area of Pt in the catalysts, the platinum nanoparticles dispersion, and Pt contents in the catalysts was studied. The Sb-doped SnO₂ oxides with various Sb-doping levels were prepared as a supports of platinum catalysts in polymer electrolyte membrane fuel cells. Density functional theory simulation of Ti, Sb, and Ru doping of tin dioxide and interaction of the doped surfaces with platinum cluster Pt₁₉ have been carried out. All calculations were performed in PBE exchange–correlation functional, with periodic boundary conditions and projector-augmented waves (PAW) basis set. The calculation results were compared with the experimental data X-ray diffraction and transmission electron microscopy (TEM). It was shown that Sb doping of tin dioxide (in quantity of less than 10%, that is, the quantity which cannot provoke significant defects of crystal structure of the supports) leads to a significant increase in a number of platinum clusters adsorbed from the colloidal solution onto the supports surface which results to an increase of the platinum cluster interaction with the supports. The calculated and experimental results are in close fit.     

Quantum-chemical modeling of the dissociative adsorption of molecular hydrogen onto the tin dioxide surface

The hydrogen adsorption, dissociation, and migration on the tin dioxide surface have been modeled by the density functional theory method within the generalized gradient approximation (GGA) under periodic conditions using a projector-augmented plane-wave (PAW) basis set with a pseudopotential. It has been demonstrated that dissociative chemisorption onto the tin dioxide surface depends on the adsorption site and the surface structure and that there are places on the surface where dissociation can occur with a low barrier of 0.1–0.2 eV to yield a primary isomer in which one of the hydrogen atoms is bound to the tin atom and the other, to an oxygen atom; the second dissociation even at the same place is possible only if the primary isomer overcomes a barrier of ∼1 eV and transforms to the secondary isomer with two O-H bonds.     

Tin Acetylacetonate as a Precursor for Producing Gas-Sensing SnO<Subscript>2</Subscript> Thin Films

To expand the range of precursors used in the sol–gel technology for applying nanostructured SnO₂ thin films promising as components of semiconductor chemical gas sensors, the efficiency of using tin acetylacetonate solutions with various precursor concentrations was demonstrated. It was determined that finely divided SnO₂ with a crystallite size of 3–4 nm (cassiterite) can be obtained by hydrolysis by atmospheric moisture in the course of solvent evaporation at room temperature. Using tin acetylacetonate solutions with various precursor concentrations for applying SnO₂ thin films by dip coating to the surface of rough ceramic Al₂O₃-based substrates with platinum interdigital electrodes and a microheater resulted in significant differences in microstructure, continuity, thickness, and porosity of the produced coatings. In a lower-concentration (0.13 mol/L) tin acetylacetonate solution, a multilayer dense continuous SnO₂ coating was applied, whereas in a higher-concentration (0.25 mol/L) solution, the formed layer comprised aggregated nanoparticles 30–60 nm in size and had much more defects and higher porosity. The sensitivity of the obtained thin-film nanostructures to the most practically important gaseous analytes: CO, H₂, CH₄, CO₂, and NO₂. The produced two-dimensional nanomaterials were shown to be promising for detecting carbon monoxide at 200–300°C in dry air.     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

Stationary states and dissociation of H<Subscript>3</Subscript>O radical in water clusters

The ground and low-lying excited states of H₃O(H₂O) _k radicals are studied. The character of the unpaired electron localization in the systems is analyzed, and the relative probability of the radical dissociation onto a water cluster and atomic hydrogen is estimated. Reaction coordinates of the dissociation are constructed and conditions of metastable existence of an H₃O radical are determined. Structures, in which H₃O can spontaneously dissociate, are found. Lifetimes of H₃O(H₂O) _k clusters before the hydrogen atom detachment at the initial conditions of two kinds, namely, upon the vertical attachment of an electron to H₃O⁺(H₂O) _k cations and upon the vibrational excitation of metastable neutral H₃O(H₂O) _k systems, are estimated.     

Interconversion of stannylium ions in the C<Subscript>4</Subscript>H<Subscript>11</Subscript>Sn<Superscript>+</Superscript> system

B3LYP method with the LANL2DZ basis for tin and aug-cc-pVDZ basis for carbon and hydrogen were used to obtain the equilibrium geometry of the main (with a positive charge on the tin) isomers in the C₄H₁₁Sn⁺ system and the transition states at their interconversion. As in the case of silicon and germanium, the cations of lighter elements of the 14th group, the most stable isomer is shown to be the tertiary ion, however, the energy of its complexes with ethane and propane is higher only by several kJ mol⁻¹. Nevertheless, the formation of these complexes from the tertiary ion requires overcoming a rather high barrier (293 and 272 kJ mol⁻¹, respectively). The barrier for isomerization of the secondary ion in the ethane complex is somewhat lower (222 kJ mol⁻¹), but still is significantly greater than the energy gained at the appearance of the nucleogenic ion. The most probable transformation pathways of the nucleogenic stannylium ions are the formation of complexes with ethylene, which requires overcoming barriers of 130 and 117 kJ mol⁻¹ for the tertiary and secondary ions, respectively.     

Catalytic properties of SnO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> compositions in total methane oxidation

Tin and titanium dioxides and their compositions were studied as catalysts for the reaction of complete oxidation of methane. The catalytic activity of the test samples was compared in terms of first-order reaction rate constants with reference to the unit surface area of a catalyst. The crystal structures and specific surface areas of the obtained compositions were characterized. The thermal stability of SnO₂ was investigated. Data on the temperature-programmed reduction of SnO₂ and the composition Sn_0.70Ti_0.30O₂ in hydrogen were given.     

Kinetics of processes occurring at a H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript>/Pt,H<Subscript>2</Subscript> interface depending on the platinum content on the electrode

Kinetics of processes occurring at H⁺/solid electrolyte/Pt, H₂ three-phase interface are studied subject to the platinum content on the electrode. The study was performed with model electrochemical cells PbO₂/H₃PW₁₂O₄₀/Pt with different platinum content at the working electrode that consisted of platinum deposited onto the E-Tek LT1200-N carbon-nanotubes paper. On the basis of the obtained results, the occurring processes were practically fully separated. It is shown by the analyzing of relaxation curves that there exist at least two processes in the system: the faster one corresponds to the hydrogen reaction; the slower, to the oxygen one. The rates of both processes depend on the platinum content at the working electrode; they have an extreme at the platinum concentration of 0.5 mg/cm². Impedance data allowed revealing the processes’ limiting stages. The experimental data allowed suggesting that at low platinum content the relaxation time is determined by the electrochemical reaction rate; at higher content, by gas diffusion through the platinum dense layer.