Conductivity of SnO<Subscript>2</Subscript>-In<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystalline composite films

The conductivity of films consisting of a mixture of SnO₂ and In₂O₃ nanocrystals at 200–500°C was studied. Based on the experimental data, it was assumed that in films containing less than 20 wt % In₂O₃, the current flows along SnO₂ nanocrystals. A model of conductivity in these films is presented; it includes an electron transfer from In₂O₃ to SnO₂, which forms positively charged In₂O₃ nanocrystals that contact the negatively charged SnO₂ nanocrystals. In the presence of In₂O₃ nanocrystals, the activation energy of the electron transfer between SnO₂ nanocrystals decreased substantially because of a decrease in the barrier of electron transfer between SnO₂ crystals under the action of the negative charge. As a result, a percolation cluster of charged SnO₂ crystals formed. At high contents of In₂O₃ (over 20 wt %), the conductivity increased dramatically. The curve of the temperature dependence of conductivity changed because of the appearance of a percolation cluster of In₂O₃ nanocrystals, in which the current passed. The conductivity of a mixed film of this kind differed from that of the nanocrystalline film of pure In₂O₃.     

Preparation of novel visible-light-driven In<Subscript>2</Subscript>O<Subscript>3</Subscript>–CaIn<Subscript>2</Subscript>O<Subscript>4</Subscript> composite photocatalyst by sol–gel method

Novel visible-light-activated In₂O₃–CaIn₂O₄ photocatalysts were developed in this paper through a sol–gel method. The photocatalytic activities of In₂O₃–CaIn₂O₄ composite photocatalysts were investigated based on the decomposition of methyl orange under visible light irradiation (λ > 400 nm). The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and UV–vis diffused reflectance spectroscopy (DRS). The results revealed that the In₂O₃–CaIn₂O₄ composite samples with different In₂O₃ and CaIn₂O₄ content can be obtained by controlling the synthesis temperature, and the composite photocatalysts extended the light absorption spectrum toward the visible region. The photocatalytic tests indicated that the composite samples demonstrated high visible-light activity for decomposition of methyl orange. The significant enhancement in the In₂O₃–CaIn₂O₄ photo-activity under visible light irradiation can be ascribed to the efficient separation of photo-generated carriers in the In₂O₃ and CaIn₂O₄ coupling semiconductors.     

Chemisorption of SO<Subscript>2</Subscript> on the Zn-modified In<Subscript>2</Subscript>O<Subscript>3</Subscript> surface

Chemisorption of SO₂ and O₂ on the In₂O₃ surface containing a zinc additive (0.4–2.7 at.%) was studied in a temperature range of 22–200 °C. At least three forms of sorbed SO₂ exist on the modified In₂O₃ surface. The temperature affects the contribution of single forms of SO₂ sorption and, hence, the change in the electric conductivity. The preliminary sorption of O₂ favors the formation of a donor form of chemisorbed SO₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2228–2232, October, 2005.     

Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Interaction of Cl<Subscript>2</Subscript> and SO<Subscript>2</Subscript> with Finely Divided In<Subscript>2</Subscript>O<Subscript>3</Subscript>

The effect of O₂, Cl₂, and SO₂ on electrophysical and sorption properties of powdered In₂O₃ with a large specific area is studied at 23–200°C. The specimen is most sensitive to Cl₂ and SO₂ at near-room temperatures.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 529–536.Original Russian Text Copyright © 2005 by Vinokurova, Derlyukova.     

Glass formation in the CaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> and SrO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

A physicochemical study of glasses based on the MO-Bi₂O₃-B₂O₃ and SrO-Bi₂O₃-B₂O₃ systems was performed. Glass formation regions were found. The structural and optical properties, as well as the thermal behavior of the glasses, were studied.     

Effect of SO<Subscript>2</Subscript> on chlorination of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mixtures

The reaction of Bi₂O₃ + Fe₂O₃ mixtures with chlorine and SO₂ at 250–700°C is studied. At 300–500°C, the degree of bismuth chloride sublimation from the oxide mixture increases in the presence of SO₂. Chemical sublimation of FeCl₃ occurs after BiCl₃ is virtually completely recovered from the solid phase.     

Structure and properties of films based on HfO<Subscript>2</Subscript>-Sc<Subscript>2</Subscript>O<Subscript>3</Subscript> double oxide

The results of the investigation of the chemical constitution and structure of (HfO₂) _x (Sc₂O₃)_1−x thin films are reported. The films are obtained by chemical vapor deposition (CVD) from hafnium 2,2,6,6-tetramethyl-3,5-heptandionate (Hf(thd)₄) and scandium 2,2,6,6-tetramethyl-3,5-heptandionate (Sc(thd)₃) coordination compounds. It is demonstrated by powder X-ray diffraction and infrared spectroscopy that depending on the scandium content in the films the structure is changed from monoclinic to cubic. Voltage-capacity dependences of test Al/(HfO₂) _x (Sc₂O₃)_1−x /Si structures are used to calculate the dielectric constant of the films. For the films with the cubic structure it is found that k = 21, while for the films with the monoclinic structure k = 9.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> phase diagram

Phase relations in the Y₂O₃-Ga₂O₃ system were studied by the anneal-and-quench technique in air within 1000–2300°C, and a phase diagram was plotted. Three compounds were found to form: Y₃GaO₆, Y₄Ga₂O₉, and Y₃Ga₅O₁₂; the temperature and concentration bounds of stability were determined for these compounds. Indexing results for Y₃GaO₆ are given.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Prediction of new A<Subscript>3+</Subscript>B<Subscript>3+</Subscript>C<Subscript>2+</Subscript>O<Subscript>4</Subscript> compounds

Hitherto unprepared ABCO₄ compounds (where A and B stand for tervalent metals (r _A ≥ r _B) and C stands for a divalent metal) are predicted. Criteria are found to predict the possibility for these compounds to crystallize in some type of structure (K₂NiF₄, CaFe₂O₄, YbFe₂O₄, or spinel) at room temperature and atmospheric pressure. The prediction is based only on the properties of elements and simple oxides. A special software system for computer-aided analysis of information is used for calculations involving pattern recognition based on use case.     

Solid solutions in the MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Coexisting solid solutions with spinel and corundum structure were synthesized at 1773 K and two pressures, 1 bar and 25 kbar. Samples were analyzed by electron microprobe analysis and X-ray powder diffraction. Pressure and temperature were shown to affect the properties of the solid solutions in different ways. Pressure governs the composition of the defect spinel Mg_1−xAl₂O₄, and temperature changes the cation distribution between coexisting phases. This allows one to separate the effects of cation exchange and magnetic contribution to the heat capacity in thermodynamic modeling. The defect spinel itself can form only because γ-Al₂O₃ exists, polymorph with spinel structure.     

Thermal and structural investigation of SnO<Subscript>2</Subscript>/Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> obtained by the polymeric precursor method

SnO₂-based materials are used as sensors, catalysts and in electro–optical devices. This work aims to synthesize and characterize the SnO₂/Sb₂O₃-based inorganic pigments, obtained by the polymeric precursor method, also known as Pechini method (based on the metallic citrate polymerization by means of ethylene glycol). The precursors were characterized by thermogravimetry (TG) and differential thermal analysis (DTA). After characterization, the precursors were heat-treated at different temperatures and characterized by X-ray diffraction. According to the TG/DTA curves basically two-step mass loss process was observed: the first one is related to the dehydration of the system; and the second one is representative to the combustion of the organic matter. Increase of the heat treatment temperature from 500 to 600°C and 700°C resulted higher crystallinity of the formed product.     

Phase relations in the MgO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Phase relations in the MgO-Bi₂O₃-B₂O₃ system have been investigated by X-ray powder diffraction analysis and DTA. No ternary compounds have been found in the system. Quasi-binary sections have been the 600°C determined and isothermal section of the system has been constructed.     

Yttria stabilized zirconia solid electrolyte surface modification with ZrO<Subscript>2</Subscript>, Y<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript> + 9 mol % Y<Subscript>2</Subscript>O<Subscript>3</Subscript> films

The surface of ceramic electrolyte ZrO₂ + 9 mol % Y₂O₃, hereinafter referred to as YSZ (abbreviated yttria stabilized zirconia), was modified with 0.1 to 0.2 μm oxide films of ZrO₂, Y₂O₃, and YSZ (same composition as substrate) by dip coating in alcohol solutions of the relevant salts and further annealing. The results of scanning electronic microscopy and X-ray diffraction evidence epitaxial film growth. By means of impedance spectroscopy at the temperatures of 500 to 600°C, the effect of YZS electrolyte surface modification with ZrO₂, Y₂O₃, and YSZ films to the polarization resistance of silver electrode was studied.     

Comparing the electrochemical properties of pure phase Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript> and composite Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>/C

Compound Zn₂SnO₄ was synthesized by a hydrothermal method in which SnCl₄ · 5H₂O, ZnCl₂ and N₂H₄ · H₂O were used as reactants. Composite Zn₂SnO₄/C was then synthesized through a carbothermic reduction process using the as-prepared Zn₂SnO₄ and glucose as reactants. Comparing to the pure Zn₂SnO₄, some improved electrochemical properties were obtained for composite Zn₂SnO₄/C. When doped with 15% glucose, the composite Zn₂SnO₄/C showed the best electrochemical performance. Its first discharge capacity was about 1500 mA h g⁻¹, with a capacity retain of 500 mA h g⁻¹ in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05–3.0 V. There were also some differences displayed in their cyclic voltammogram.     

Rational design of double-confined Mn<Subscript>2</Subscript>O<Subscript>3</Subscript>/S@Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocube cathodes for lithium-sulfur batteries

Due to the high specific capacities and environmental benignity, lithium-sulfur (Li-S) batteries have shown fascinating potential to replace the currently dominant Li-ion batteries to power portable electronics and electric vehicles. However, the shuttling effect caused by the dissolution of polysulfides seriously degrades their electrochemical performance. In this paper, Mn₂O₃ microcubes are fabricated to serve as the sulfur host, on top of which Al₂O₃ layers of 2 nm in thickness are deposited via atomic layer deposition (ALD) to form Mn₂O₃/S (MOS) @Al₂O₃ composite electrodes. The MOS@Al₂O₃ electrode delivers an excellent initial capacity of 1012.1 mAh g^?1 and a capacity retention of 78.6% after 200 cycles at 0.5 C, and its coulombic efficiency reaches nearly 99%, giving rise to much better performance than the neat MOS electrode. These findings demonstrate the double confinement effect of the composite electrode in that both the porous Mn₂O₃ structure and the atomic Al₂O₃ layer serve as the spacious host and the protection layer of sulfur active materials, respectively, for significantly improved electrochemical performance of the Li-S battery.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Thermoanalytical study of precursors for In<Subscript>2</Subscript>S<Subscript>3</Subscript> thin films deposited by spray pyrolysis

Thermal decomposition of precursors for In₂S₃ thin films obtained by drying aqueous solutions of InCl₃ and SC(NH₂)₂ at the In:S molar ratios of 1:3 (1) and 1:6 (2) was monitored by simultaneous TG/DTA/EGA-FTIR measurements in the dynamic 80%Ar + 20%O₂ atmosphere. XRD and FTIR were used to identify the dried precursors and products of the thermal decomposition. The precursors 1 and 2 are complex compounds, while in 2 free SC(NH₂)₂ is also present. The thermal degradation of 1 and 2 in the temperature range of 30–900 °C consists of four mass loss steps, the total mass loss being 89.1 and 78.5%, respectively. According to XRD, In₂S₃ is formed below 300 °C, crystalline In_2.24(NCN)₃ is detected only in 1 above 520 °C and In₂O₃ is the final decomposition product at 900 °C. The gaseous species evolved include CS₂, NH₃, H₂NCN, HNCS, which upon oxidation yield also COS, SO₂, HCN and CO₂.     

Gold catalysts supported on ZnO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> for low-temperature CO oxidation

Gold catalysts with loadings ranging from 0.5 to 7.0 wt% on a ZnO/Al₂O₃ support were prepared by the deposition–precipitation method (Au/ZnO/Al₂O₃) with ammonium bicarbonate as the precipitation agent and were evaluated for performance in CO oxidation. These catalysts were characterized by inductively coupled plasma-atom emission spectrometry, temperature programmed reduction, and scanning transmission electron microscopy. The catalytic activity for CO oxidation was measured using a flow reactor under atmospheric pressure. Catalytic activity was found to be strongly dependent on the reduction property of oxygen adsorbed on the gold surface, which related to gold particle size. Higher catalytic activity was found when the gold particles had an average diameter of 3–5 nm; in this range, gold catalysts were more active than the Pt/ZnO/Al₂O₃ catalyst in CO oxidation. Au/ZnO/Al₂O₃ catalyst with small amount of ZnO is more active than Au/Al₂O₃ catalyst due to higher dispersion of gold particles.