Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Stabilisation of iridium(III) fluoride complexes with NHCs

The first neutral, [IrClF(2)(NHC)(COD)] and [IrClF(2)(CO)(2)(NHC)] (NHC = IMes, IPr), and cationic, [IrF(2)py(IMes)(COD)][BF(4)] and [IrF(2)L(CO)(2)(NHC)][BF(4)] (NHC = IMes, L = PPh(2)Et, PPh(2)CCPh, py; NHC = IPr, L = py), NHC iridium(III) fluoride complexes, have been synthesised by the xenon difluoride oxidation of iridium(I) substrates. The stereochemistries of these iridium(III) complexes have been confirmed by multinuclear NMR spectroscopy in solution and no examples of fluoride-trans-NHC arrangements were observed. Throughout, CO was found to be a better co-ligand for the stabilisation of the iridium(III) fluoride complexes than COD. Attempts to generate neutral trifluoroiridium(III) complexes, [IrF(3)(CO)(NHC)], via the ligand substitution reaction of [IrF(3)(CO)(3)] with the free NHCs were unsuccessful.     

Zinc N-heterocyclic carbene complexes and their polymerization of d,l-lactide

A series of zinc complexes of monodentate N-heterocyclic carbenes (NHCs) and a new sterically bulky bidentate pyridyl-NHC ligand have been synthesized and characterized by spectroscopic and X-ray crystallographic methods. Dinuclear alkoxide complexes of monodentate NHC complexes with 2,4,6-trimethylphenyl substituents appear to form monomeric species in solution and show good control and activity for lactide polymerization, including mild stereoelectivity as indicated by formation of heterotactic-enriched polylactide in d,l-lactide polymerizations. Kinetics studies revealed an overall second order rate law, first order in [LA] and [catalyst]. Efforts to obtain Zn–alkoxide complexes of a more sterically hindered NHC with 2,6-diisopropylphenyl groups were unsuccessful due to Zn–NHC bond scission. Ligand dissociation was also observed in attempts to prepare Zn–alkoxide complexes of the bidentate pyridyl-NHC system, despite its chelating nature.     

Chromium(0)-rhodium(I) metal exchange: Synthesis and X-ray structure of new Fischer (NHC)carbene complexes of rhodium(I)

An easy approach to Fischer (NHC)carbene complexes of rhodium(I) 3 from methoxy- and aminocarbene complexes of chromium 1 and (NHC)(cod)RhCl (2) is described. The process involves the transfer of the carbene unit and a CO ligand from chromium to rhodium. The X-ray analysis is provided for 3d and the preliminary results on their thermal stability and reactivity toward alkynes and allenes are also reported.     

Palladium, rhodium and platinum complexes of ortho-xylyl-linked bis-N-heterocyclic carbenes: Synthesis, structure and catalytic activity

New Pd(II), Pt(II) and Rh(I) N-heterocyclic carbene (NHC) complexes containing two NHC units linked by an ortho-xylyl group are described and structurally and spectroscopically characterised. The Pt(II) complexes represent the first examples of Pt-bis(NHC) complexes where the NHC units are linked by an ortho-xylyl group. Functionalisation of the bis(NHC) ligands with heptyl groups has been used as a means of enhancing the solubility of the complexes, in order to facilitate spectroscopic characterisation and catalytic studies. The catalytic activity of the palladium(II) complexes in Heck and Suzuki cross-coupling reactions has been examined to investigate any effects of the diverse structural changes, though these appear to be insignificant.     

Pyrazole-3-carboxylates assisted N-heterocyclic carbene palladium complexes: synthesis,characterization, and catalytic activities towards arylation of azoles with arylsulfonyl hydrazides

Four mononuclear and dinuclear pyrazole-3-carboxylates assisted NHC–Pd complexes have been synthesized and characterized. Notably, the bridge-cleavage reactions of [Pd(μ-Cl)(Cl)(NHC)]₂ with 1H-pyrazole-3-carboxylic acid afforded dinuclear complexes [(NHC)Pd(μ-1H-pyrazolato-3-carboxylate)]₂, in which the 1H-pyrazolato-3-carboxylate was employed as a N^N^O dianionic chelating and bridging ligand. To further explore the structural features and catalytic properties of the complexes, 1-methyl-1H-pyrazole-3-carboxylic acid was introduced into the coordination with [Pd(μ-Cl)(Cl)(NHC)]₂ and the corresponding mononuclear complexes (NHC)PdCl(1-methyl-1H-pyrazole-3-carboxylate) were obtained. The catalytic properties of the complexes in desulfitative arylation of azoles with arylsulfonyl hydrazides were initially investigated.     

Alkoxydiaminophosphine Ligands as Surrogates of NHCs in Copper Catalysis

A family of phosphine ligands containing a five-membered ring similar to the popular N-heterocyclic carbene ligands and an alkoxy third substituent has been developed. These alkoxydiaminophosphine ligands (ADAP) can be generated in one pot and reacted with a copper(I) source leading to the high yield isolation of complexes [(ADAP)CuX]₂ (X=Cl, Br). The dinuclear nature of these compounds has been established by means of X-ray studies and DOSY experiments. A screening of the catalytic properties of these complexes toward carbene-transfer reactions from diazocompounds to C−H bonds (alkane, arene), olefins or N−H bonds, as well as in CuAAC or nitrene transfer reactions have shown a performance at least similar, if not better, than their (NHC)CuCl analogues, opening a new window in copper catalysis with these readily tunable ADAP ligands.     

Sulfonated N‐heterocyclic carbine‐silver (I) complexes: Synthesis,characterisation and biological evaluation

The synthesis, characterisation and biological activity of water‐soluble Ag(I)‐NHC complexes, general formula Na[(NHC)AgCl] where NHC is a sulfonated and sterically hindered N‐heterocyclic carbene, is reported. The Ag‐NHC complexes (2a–e) were synthesised by reacting the corresponding sulfonated NHC ligands with Ag₂O in the presence of NaCl or NaBr in methanol/water (1:1) solution. Synthesised silver (I)‐N‐heterocyclic carbene complexes have been characterised by NMR, micro‐analysis and HRMS spectroscopic methods. The IC₅₀ values of these complexes were determined by a proliferation BrdU enzyme‐linked immunosorbent assay (ELISA) against HeLa (human cervix carcinoma), HT29 (human adenocarcinoma) and L929 (mouse fibroblast) cell lines. These complexes have been highlighted as promising and original platforms for building new types of metalodrug. All new water‐soluble Ag(I) complexes demonstrated remarkable cytotoxic activity against HeLa, HT29 and L929 cell lines.     

Cationic NHC-gold(I) complexes: Synthesis, isolation, and catalytic activity

The reaction of [(NHC)AuCl] complexes (NHC = N-heterocyclic carbene) with a chloride abstractor of the type AgX, where X is a non-coordinating anion, led, in the presence of a neutral coordinating solvent S, to a series of cationic gold(I) complexes of formulae [(NHC)Au(S)]X. Hence, different cationic NHC-gold(I) species bound to acetonitrile, pyridine, 2-Br-pyridine, 3-Br-pyridine, norbornadiene, and THF could be synthesized and characterized by ¹H and ¹³C NMR spectroscopies. Among these, the results of X-ray diffraction studies for [(IPr)Au(NCMe)]SbF₆, [(IAd)Au(NCMe)]PF₆, [(IPr)Au(pyr)]PF₆, [(IPr)Au(2-Br-pyr)]PF₆, [(IPr)Au(3-Br-pyr)]PF₆ are discussed. As special feature, the structure of [(IPr)Au(2-Br-pyr)]PF₆ presented a secondary interaction between the gold and bromine atoms. Additionally, while attempting to obtain crystals of [(IPr)Au(nbd)]PF₆, we crystallized a decomposition product featuring a very rare anion as bridging ligand with formulae [(μ-PF₄)((IPr)Au)₂]PF₄. The observation of a possible P-F bond activation has important implications for cationic Au-based homogeneous catalysis. Finally, we compared the catalytic activities of the different cationic [(NHC)Au(S)]X complexes in the allylic acetate rearrangement reaction and notably observed the inertness of pyridine-based catalysts.     

Quinoline-functionalized N-heterocyclic carbene complexes of iridium: Synthesis, structures and catalytic activities in transfer hydrogenation

Iridium complexes containing quinoline-functionalized N-heterocyclic carbene (NHC) ligands have been synthesized by the transmetalation route from silver carbene precursors. The silver complexes undergo a facile reaction with [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) to yield a series of carbene complexes [(NHC)Ir(COD)Cl] (NHC = 3-methyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2a); 3-n-butyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2b); 3-benzyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2c); 1,3-di(8-quinolylmethyl)imidazole-2-ylidene (2d). The coordinated COD was replaced by carbon monoxide to yield the corresponding carbonyl species [(NHC)Ir(CO)₂Cl] (3). Complexes 2 and 3 have been characterized by IR, ESI-MS, ¹H and ¹³C NMR and elemental analyses. The molecular structures of complexes 2b and 2c have been confirmed by single-crystal X-ray diffraction. Two analogous Ir(I) complexes 5 and 6 with naphthalene-containing NHC have also been synthesized and characterized. These Ir(I) complexes in the current work have been proved to be active catalysts in the transfer hydrogenation of ketones to alcohols using 2-propanol as the hydrogen source.     

Synthesis,reactivity and preliminary biological activity of iron(0) complexes with cyclopentadienone and amino‐appended N‐heterocyclic carbene ligands

Neutral and cationic cyclopentadienone (CpO) N‐heterocyclic carbene (NHC) bis‐carbonyl iron(0) complexes bearing, appended to the NHC ligand, either a terminal amino group on the lateral chain, [Fe(η⁴‐CpO)(CO)₂(κC‐NHC(CH₂)_nNH₂)] with n = 2 ( 2a ) and 3 ( 2b ), or a cationic NMe₃⁺ fragment, [Fe(η⁴‐CpO)(CO)₂(κC‐NHC(CH₂)₂NMe₃)](I) ( 3 ), were prepared and characterized in terms of their structure, stability and reactivity. The photochemical properties of 2a and 2b were examined both in organic solvents and in water, revealing the photoactivated release of one CO ligand followed by the formation of the chelated complex [Fe(η⁴‐CpO)(CO)(κ²C,N‐NHC(CH₂)₂NH₂)] ( 4 ), whose molecular structure was confirmed by single crystal X‐ray diffraction studies. This metallacyclization occurs only in the case of 2a , with the ethylene spacer between NHC ring and NH₂ group in the lateral chain, allowing the formation of a stable 6‐membered ring. On the other hand, 2b undergoes decomposition upon irradiation. The reactivity in aqueous solutions revealed the chemical speciation of the complexes at different pH and especially under physiological conditions (phosphate buffer solution at pH 7.4 and 37 °C). The lack of data on the biological properties of iron(0) complexes prompted us to preliminarily investigate their cytotoxicity against model cancer cells (AsPC‐1 and HPAF‐II), along with a determination of their lipophilicity.     

How the Substitution Faraway from NHCs Affects the Structural Features and Catalytic Activity of Dicarbene Dipalladium Complexes

A series of [PdPyCl₂]₂(di‐NHC) complexes were prepared (di‐NHC are two 1‐(2,6‐dimethylphenyl)imidazolidene molecules bridged by an aliphatic –(CH₂)_n– linker (n = 3, 4, 5, 6, and 10)). All complexes were fully characterized by NMR spectroscopy and elemental analyses. The crystal structures of four complexes (n = 3, 4, 5 and 6) were determined by X‐ray diffraction. The influence of the distant methyl group on the structural features and catalytic activity with increasing of length of linker was investigated by comparing the results of these 2,6‐dimethylphenyl palladium complexes with those of their known mesityl analogues. X‐ray studies show the distant methyl substitution has big impact on the structure feature of the complexes with the shorter linker between two NHC (ethylene and propylene), but has a little or no effect on that of the complexes with longer linker (butylene and hexylene). Catalytic results of the arylation of styrene show that the remote substitute has big effect on the regioselectivity of the product in all complexes with shorter and longer linkers, but has a limited effect on the yield.     

Redox-Switchable Behavior of Transition-Metal Complexes Supported by Amino-Decorated N-Heterocyclic Carbenes

The coordination chemistry of the N-heterocyclic carbene ligand IMes^(NMe2)2, derived from the well-known IMes ligand by substitution of the carbenic heterocycle with two dimethylamino groups, was investigated with d⁶ [Mn(I), Fe(II)], d⁸ [Rh(I)], and d¹⁰ [Cu(I)] transition-metal centers. The redox behavior of the resulting organometallic complexes was studied through a combined experimental/theoretical study, involving electrochemistry, EPR spectroscopy, and DFT calculations. While the complexes [CuCl(IMes^(NMe2)2)], [RhCl(COD)(IMes^(NMe2)2)], and [FeCp(CO)₂ (IMes^(NMe2)2)](BF₄) exhibit two oxidation waves, the first oxidation wave is fully reversible but only for the first complex the second oxidation wave is reversible. The mono-oxidation event for these complexes occurs on the NHC ligand, with a spin density mainly located on the diaminoethylene NHC-backbone, and has a dramatic effect on the donating properties of the NHC ligand. Conversely, as the Mn(I) center in the complex [MnCp(CO)₂ ((IMes^(NMe2)2)] is easily oxidizable, the latter complex is first oxidized on the metal center to form the corresponding cationic Mn(II) complex, and the NHC ligand is oxidized in a second reversible oxidation wave.     

Palladium complexes of bidentate pyridine N‐heterocyclic carbenes: Optical resolution,antimicrobial and cytotoxicity studies

A series of bidentate pyridine‐functionalized palladium N‐heterocyclic carbene (Pd NHC) complexes with various wingtip substituents (R = methyl, phenyl and tert‐butyl) have been synthesized and evaluated for their potential biomedical applications as antimicrobials and antiproliferative drug candidates. The obtained Pd NHC complexes were applied in a standard broth microdilution assay for determination of their antimicrobial activities against thirteen strains of pathogenic microorganisms. In addition to that, cytotoxic activities of the Pd NHC complexes were also evaluated against three human cancer cell lines, namely breast (MCF‐7), colon (HCT116) and oral (H103) cancer cells, using a standard MTT assay. Upon coordination to palladium, the Pd NHC complexes show significant antimicrobial activities with minimum inhibitory concentrations in the micromolar range, and they are cytotoxic to the tested carcinomas with IC₅₀ ranging from 13 to 38 μM. Evidences for influence of both wingtip substituents and optical isomerism on the biological activities of the complexes have been found.     

Four-coordinate N-heterocyclic carbene (NHC) copper(I) complexes with brightly luminescence properties

Three four-coordinate N-heterocyclic carbene (NHC) copper(I) complexes, [Cu(Py-Im)(POP)](PF₆) (P1), [Cu(Py-BenIm)(POP)](PF₆) (P2), and [Cu(Py-c-BenIm)(POP)](PF₆) (P3) (Py-Im = 3-methyl-1-(pyridin-2-yl)-1H-imidazolylidene, Py-BenIm = 3-methyl-1-(pyridin-2-yl)-1H-benzo[d]imidazolylidene, Py-c-BenIm = 3-methyl-1-(pyridin-2-ylmethyl)-1H-benzo[d]imidazolylidene, POP = bis([2-diphenylphosphino]-phenyl)ether), have been synthesized without transmetalation of the NHC–Ag(I) complex for the first time. The photophysical properties of the resultant NHC–Cu(I) complexes have been systematically investigated via spectroscopic methods. All complexes exhibit good photoluminescence properties with long excited-state lifetimes and moderate quantum yields. Density functional theory and time dependent density functional theory calculations were employed to rationalize the photophysical properties of the NHC–Cu(I) complexes.     

Reactions of Pd-PEPPSI complexes with protic acids

The Pd-PEPPSI complexes widely used to catalyze numerous reactions eliminate the pyridine ligand on treatment with protic acids to give binuclear complexes [Pd(NHC)X₂]₂ with the Pd–X–Pd (X = Cl, Br, I) bridging bonds. The reaction proceeds with high yields (78–98%) and can be regarded as a preparative approach to binuclear complexes. A prolonged heat treatment of either Pd-PEPPSI complexes or binuclear [Pd(NHC)X₂]₂ complexes in the presence of strong protic acids results in the Pd–NHC bond cleavage to give azolium salts (proligands) and palladium salts.     

Chiral iridium(I) bis(NHC) complexes as catalysts for asymmetric transfer hydrogenation

The common use of NHC complexes in transition‐metal mediated C–C coupling and metathesis reactions in recent decades has established N‐heterocyclic carbenes as a new class of ligand for catalysis. The field of asymmetric catalysis with complexes bearing NHC‐containing chiral ligands is dominated by mixed carbene/oxazoline or carbene/phosphane chelating ligands. In contrast, applications of complexes with chiral, chelating bis(NHC) ligands are rare. In the present work new chiral iridium(I) bis(NHC) complexes and their application in the asymmetric transfer hydrogenation of ketones are described. A series of chiral bis(azolium) salts have been prepared following a synthetic pathway, starting from L ‐valinol and the modular buildup allows the structural variation of the ligand precursors. The iridium complexes were formed via a one‐pot transmetallation procedure. The prepared complexes were applied as catalysts in the asymmetric transfer hydrogenation of various prochiral ketones, affording the corresponding chiral alcohols in high yields and moderate to good enantioselectivities of up to 68%. The enantioselectivities of the catalysts were strongly affected by the various, terminal N‐substituents of the chelating bis(NHC) ligands. The results presented in this work indicate the potential of bis‐carbenes as stereodirecting ligands for asymmetric catalysis and are offering a base for further developments. Copyright © 2010 John Wiley & Sons, Ltd.     

Symmetric and dissymmetric N‐heterocyclic carbene rhodium(I) complexes: a comparative study of their catalytic activities in transfer hydrogenation reaction

Six new [RhBr(NHC)(cod)] (NHC = N‐heterocyclic carbene; cod = 1,5‐cyclooctadiene) type rhodium complexes ( 4–6 ) have been prepared by the reaction of [Rh(μ‐OMe)(cod)]₂ with a series of corresponding imidazoli(in)ium bromides ( 1–3 ) bearing mesityl (Mes) or 2,4,6‐trimethylbenzyl (CH₂Mes) substituents at N¹ and N³ positions. They have been fully characterized by ¹ H, ¹³ C and heteronuclear multiple quantum correlation NMR analyses, elemental analysis and mass spectroscopy. Complexes of type [(NHC)RhBr(CO)₂] (NHC = imidazol‐2‐ylidene) ( 7b–9b ) were also synthesized to compare σ‐donor/π‐acceptor strength of NHC ligands. Transfer hydrogenation (TH) reaction of acetophenone has been comparatively studied by using complexes 4–6 as catalysts. The symmetrically CH₂Mes‐substituted rhodium complex bearing a saturated NHC ligand ( 5a ) showed the highest catalytic activity for TH reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

N‐Phenyl‐substituted carbene precursors and their silver complexes: synthesis,characterization and antimicrobial activities

A series of unsymmetrically substituted N‐heterocyclic carbene (NHC) precursors ( 1a , 1b , 1c , 1d , 1e ) were synthesized from the reaction of N‐phenylbenzimidazole with various alkyl halides. These compounds were used to synthesize NHC–silver(I) complexes ( 2a , 2b , 2c , 2d , 2e ). The five new 1‐phenyl‐3‐alkylbenzimidazolium salts ( 1a , 1b , 1c , 1d , 1e ) and their NHC–silver complexes ( 2a , 2b , 2c , 2d , 2e ) were characterized by the ¹H NMR, ¹³C NMR and FT‐IR spectroscopic methods and elemental analysis techniques. Also, the two NHC–silver complexes 2b and 2c were characterized by single‐crystal X‐ray crystallography, which confirmed the linear C―Ag―Cl arrangements. The antibacterial activities of the NHC precursor and NHC–silver complexes were tested against three Gram‐positive bacterial strains (Bacillus subtilis, Listeria monocytogenes and Staphylococcus aureus) and three Gram‐negative bacterial strains (Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa) using the microdilution broth method. The NHC–silver complexes showed higher antibacterial activity than the NHC precursors. In addition, silver complexes 2a , 2b , 2c , 2d showed high antibacterial activity against the Gram‐positive bacteria L. monocytogenes and S. aureus compared to the standard, tetracycline. Copyright © 2014 John Wiley & Sons, Ltd.     

Iridium complex bearing a chiral hydroxy-amide functionalized N-heterocyclic carbene: a catalyst precursor for asymmetric transfer hydrogenation

A new monodentate iridium(III) complex bearing a readily accessible and tunable chiral hydroxy-amide functionalized N-heterocyclic carbene ligand, Cp^∗Ir(NHC)Cl₂, has been synthesized and characterized by crystallographic methods. The monodentate Cp^∗Ir(NHC)Cl₂ complex was found to act as a catalyst precursor for the stereoselective transfer hydrogenation of acetophenone in the presence of KOH even at room temperature. Moderate enantioselectivity was observed in the initial screening of the chiral ligands.