Synthesis of arene ruthenium triazolato complexes by cycloaddition of the corresponding arene ruthenium azido complexes with activated alkynes or with fumaronitrile

The neutral arene ruthenium azido complexes [(η⁶-p-cymene)Ru(LL)(N₃)], [LL = acetylacetonato (acac) (4), benzoylacetonato (bzac) (5) diphenylbenzoyl methane (dbzm) (6)] undergo [3+2] cycloaddition reaction with a series of activated alkynes and fumaronitrile to produce the arene ruthenium triazolato complexes: [(η⁶-p-cymene)Ru(LL){N₃C₂(CO₂R)₂}] [LL = (acac), R = Me (7); LL = (bzac), R = Me (8); LL = (dbzm), R = Me (9); LL = (acac), R = Et (10); LL = (bzac), R = Et (11); LL = (dbzm), R = Et (12) and [(η⁶-p-cymene)Ru(LL)(N₃C₂HCN)]; LL = acac (13), bzac (14); dbzm (15). However, cationic azido complexes, [(η⁶-p-cymene)Ru(dppe)(N₃)]⁺ and [(η⁶-p-cymene)Ru(dppm)(N₃)]⁺ do not undergo such cycloaddition reactions. The complexes were characterized on the basis of microanalyses, FT-IR and NMR spectroscopic data. Crystal structures of representative complexes were determined by single crystal X-ray diffraction.     

Arene ruthenium β-diketonato triazolato derivatives: Synthesis and spectral studies (β-diketones: 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one, acetylacetone derivatives)

Mononuclear neutral arene ruthenium(II) β-diketonato complexes of the general formula (η⁶-arene)Ru(LL)Cl [LL = 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one (L1), arene = C₆H₆ (1), p-ⁱPrC₆H₄Me (2), C₆Me₆ (3); arene = p-ⁱPrC₆H₄Me, LL = 1-benzoylacetone (L3) (8); arene = p-ⁱPrC₆H₄Me, LL = dibenzoylmethane (L4) (9)] have been synthesized and their subsequent substitution reactions with NaN₃ in alcohol at room temperature yielded the corresponding neutral terminal azido complexes (η⁶-arene)Ru(LL)N₃ [LL = 1-phenyl-3-methyl-4-benzoyl pyrazol-5-one (L1), arene = C₆H₆ (4), p-ⁱPrC₆H₄Me (6), C₆Me₆ (7); arene = p-ⁱPrC₆H₄Me, LL = dibenzoylmethane (L4) (10)] as well as a cationic complex [(η⁶-p-ⁱPrC₆H₄Me)Ru(L4) (PPh₃)]BF₄ (12) with PPh₃. The [3 + 2] cycloaddition reaction of selective azido complexes with the activated alkynes dimethyl and diethyl acetylenedicarboxylates produced the arene triazolato complexes [(η⁶-arene)Ru(LL){N₃C₂(CO₂R)₂}] [arene = p-ⁱPrC₆H₄Me, LL = L1, R = Me (13); arene = C₆Me₆, LL = L1, R = Me (14); arene = C₆Me₆, LL = acetyl acetone (L2), R = Me (15); arene = C₆Me₆, LL = L3, R = Me (16); arene = p-ⁱPrC₆H₄Me, LL = L1, R = Et (17); arene = C₆Me₆, LL = L1, R = Et (18); arene = C₆Me₆, LL = L2, R = Et (19); arene = C₆Me₆, LL = L3, R = Et (20)]. With fumaronitrile the reaction yielded the triazoles [(η⁶-arene)Ru(LL)(N₃C₂HCN)] [arene = p-ⁱPrC₆H₄Me, LL = L1 (21), arene = C₆Me₆, LL = L1 (22), arene = C₆Me₆, LL = L2 (23), arene = C₆Me₆, LL = L3 (24)]. In the above triazolato complexes only N(2) isomer was obtained. The complexes were characterized on the basis of spectroscopic data. Crystal structure of representatives complexes were determined by single crystal X-ray diffraction.     

The synthesis of palladacyclopentadienyl derivatives from rigid bis-alkynes and their use as precursors in the synthesis of fluoroanthene-like cycles under mild conditions. A reactivity investigation

The palladium(0) derivatives of the type [Pd(η²-ol)(LL′)] (2) (ol = dmfu: dimethylfumarate (a), fn: fumaronitrile (b), tmetc: tetramethylethylenetetracarboxylate (c), LL′ = HNSPh: 2-(phenylthiomethyl)-pyridine (A), BiPy: 2,2′-bipyridyl (B), DPPE: bis-diphenylphosphinoethane (C)) were reacted in CH₂Cl₂ with 1,8-bis(methylpropynoate)naphthalene (1) and 2,2′-bis(methylpropynoate)biphenyl (1′). At variance with the flexible 1′ derivative, the rigid bis-alkyne 1 reacts smoothly to give the corresponding cyclopalladate complexes [PdC₄(COOMe)₂(Ph)₂(LL′)] (3). The rates of reaction were determined and the X-ray diffraction structure of the complex [PdC₄(COOMe)₂(Ph)₂(HNSPh )] (3A) is reported. The reactivity of the complexes [PdC₄(COOMe)₂(Ph)₂(LL′)] (LL′ = HNSPh (3A), BiPy (3B), DPPE (3C)) was studied by reacting these complexes with fn and tetracyanoethylene (tcne), respectively. The ensuing fluoroanthene-like compounds were fully characterized.     

A novel series of iridium complexes with alkenylquinoline ligands: Theoretical study on electronic structure and spectroscopic property

The ground and the lowest-lying triplet excited state geometries, electronic structures, and spectroscopic properties of a novel series of neutral iridium(III) complexes with cyclometalated alkenylquinoline ligands [(C^N)₂Ir(acac)] (acac = acetoylacetonate; C^N = 2-[(E)-2-phenyl-1-ethenyl]pyridine (pep) 1; 2-[(E)-2-phenyl-1-ethenyl]quinoline (peq) 2; 1-[(E)-2-phenyl-1-ethenyl]isoquinoline (peiq) 3; 2-[(E)-1-propenyl]pyridine (pp) 4; 2-[(E)-1-fluoro-1-ethenyl]pyridine (fpp) 5) were investigated by DFT and CIS methods. The highest occupied molecular orbital is composed of d(Ir) and π(C^N) orbital, while the lowest unoccupied molecular orbital is dominantly localized on C^N ligand. Under the TD-DFT with PCM model level, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized ground and triplet excited state geometries, respectively. The calculated lowest-lying absorptions at 437 nm (1), 481 nm (2), 487 nm (3), 422 nm (4), and 389 nm (5) are attributed to a {[d_x²-y²(Ir) + d_xz(Ir) + π(C^N)] → [π∗(C^N)]} transition with metal-to-ligand/intra-ligand charge transfer (MLCT/ILCT) characters, and the calculated phosphorescence at 582 nm (1), 607 nm (2), 634 nm (3), 515 nm (4), and 491 nm (5) can be described as originating from the ³{[d_x²-y²(Ir) + d_xz(Ir) + π (C^N)] [π∗(C^N)]} excited state with the ³MLCT/³ILCT characters. The calculated results revealed that the phosphorescent color of these new Ir(III) complexes can be tuned by changing the π-conjugation effect strength of the C^N ligand.     

Quinoline-functionalized N-heterocyclic carbene complexes of iridium: Synthesis, structures and catalytic activities in transfer hydrogenation

Iridium complexes containing quinoline-functionalized N-heterocyclic carbene (NHC) ligands have been synthesized by the transmetalation route from silver carbene precursors. The silver complexes undergo a facile reaction with [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) to yield a series of carbene complexes [(NHC)Ir(COD)Cl] (NHC = 3-methyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2a); 3-n-butyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2b); 3-benzyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2c); 1,3-di(8-quinolylmethyl)imidazole-2-ylidene (2d). The coordinated COD was replaced by carbon monoxide to yield the corresponding carbonyl species [(NHC)Ir(CO)₂Cl] (3). Complexes 2 and 3 have been characterized by IR, ESI-MS, ¹H and ¹³C NMR and elemental analyses. The molecular structures of complexes 2b and 2c have been confirmed by single-crystal X-ray diffraction. Two analogous Ir(I) complexes 5 and 6 with naphthalene-containing NHC have also been synthesized and characterized. These Ir(I) complexes in the current work have been proved to be active catalysts in the transfer hydrogenation of ketones to alcohols using 2-propanol as the hydrogen source.     

Manganese complexes as models for manganese-containing pseudocatalase enzymes: Synthesis,structural and catalytic activity studies

Manganese complexes of the type [TpMn(X)] and [TpMn(μ-N₃)(μ-X)MnTp] (X = acetylacetonate, acac; picolinate, pic and Tp = Tp^Ph,Me for acac, Tp = Tp^ipr2 for pic complexes) having Tp^Ph,Me (hydrotris(3-phenyl,5-methyl-pyrazol-1-yl)borate)/Tp^ipr2 (hydrotris(3,5-diisopropyl-pyrazol-1-yl)borate) as a supporting ligand have been synthesized and structurally characterized. IR and X-ray structures suggest that complexes 7 and 9 are binuclear with azido and bidentate ligands (acac/pic) bridging, whereas complexes 6 and 8 are mononuclear with a 5-coordinated metal center. In complex 9 the picolinate is coordinated as tridentate in a η₃-fashion, but in complex 7 acac behaves as bidentate, whereas azide is coordinated in a bridging bidentate μ-1,3-manner in both 7 and 9. Since the coordination geometry of the manganese ions in complex 9 is very similar to the active site structure of manganese-containing pseudocatalase, we have tested the catalytic activity of the same towards the disproportionation of hydrogen peroxide. The catalytic results indicated that complex 9 has reasonably good catalase activity and may be suitable, structurally as well as functionally, as a model for the pseudocatalase enzyme.     

Synthesis, characterization and reactivity of tribenzylphosphine rhodium and iridium complexes

New rhodium and iridium complexes, with the formula [MCl(PBz₃)(cod)] [M = Rh (1), Ir (2)] and [M(PBz₃)₂(cod)]PF₆ [M = Rh (3), Ir (4)] (cod = 1,5-cyclooctadiene), stabilized by the tribenzylphosphine ligand (PBz₃) were synthesized and characterized by elemental analysis and spectroscopic methods. The molecular structures of 1 and 2 were determined by single-crystal X-ray diffraction. The addition of pyridine to a methanol solution of 1or 2, followed by metathetical reaction with NH₄PF₆, gave the corresponding derivatives [M(py)(PBz₃)(cod)]PF₆ [M = Rh (5), Ir (6)]. At room temperature in CHCl₃ solution, 4 converted spontaneously to the ortho-metallated complex [IrH(PBz₃)(cod){η²-P,C-(C₆H₄CH₂)PBz₂}]PF₆ (7) as a mixture of cis/trans isomers via intramolecular C-H activation of a benzylic phenyl ring. The reaction of 3 or 4 with hydrogen in coordinating solvents gave the dihydrido bis(solvento) derivative [M(H)₂(S)₂(PBz₃)₂]PF₆ (M = Rh, Ir; S = acetone, acetonitrile, THF), that transformed into the corresponding dicarbonyls [M(H)₂(CO)₂(PBz₃)₂]PF₆ by treatment with CO. Analogous cis-dihydrido complexes [M(H)₂(THF)₂(py)(PBz₃)₂]PF₆ (M = Rh, Ir) were observed by reaction of the py derivatives 5 and 6 with H₂.     

Catalytic hydrogenation of CO and CN bonds via heterolysis of H2 mediated by metal-sulfur bonds of rhodium and iridium thiolate complexes

Coordinatively unsaturated rhodium and iridium complexes having a bulky thiolate, [Cp∗M(PMe₃)(SDmp)](BAr^F₄) (1a: M = Rh; 1b: M = Ir; Dmp = 2,6-(mesityl)₂C₆H₃, Ar^F = 3,5-(CF₃)₂C₆H₃), catalyzed the hydrogenation of benzaldehyde, N-benzylideneaniline, and cyclohexanone, under 1 atm of H₂ at low temperatures. In these catalytic reactions, the M-H/S-H complexes [Cp∗M(PMe₃)(H)(HSDmp)](BAr^F₄) (2a: M = Rh; 2b: M = Ir) generated via H₂ heterolysis by 1a or 1b were suggested to transfer both M-H hydride and S-H proton to substrates. The catalytic reactions were terminated by the dissociation of H-SDmp from the metal centers of 2a and 2b that occurs at ambient temperature under H₂ atmosphere.     

Synthesis, structural characterization, and initial electroluminescent properties of bis-cycloiridiated complexes of 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine

A series of bis-cyclometalated Ir(III) complexes (8-10, 12, 15, 17, 19, 21, 23, 25, 28, 29 and 33) bearing two chromophoric N^∧C cyclometalated ligands derived from 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1) and a third nonchromophoric ligand has been synthesized. A palladium-catalyzed cross-coupling reaction between 2-chloro-4-methylpyridine (2) and 3,5-bis(trifluoromethyl)phenylboronic acid (3) was used to prepare 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1). Cyclometalation of (1) by IrCl₃ was carried out in (MeO)₃PO, with the formation of chloro-bridged dimer [N^∧C]₂Ir(μ-Cl)₂Ir[C^∧N]₂ (8). Reaction of (8) with lithium 2,4-pentanedionate, lithium 2,2,6,6-tetramethyl-heptane-3,5-dionate (13), dipivaloyltrimethylsilylphosphine (14), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octadione (16), 1,1,1,3,3,3-hexafluoro-2-pyridin-2-yl-propan-2-ol (18), 1,1,1,3,3,3-hexafluoro-2-pyrazol-1-ylmethyl-propan-2-ol (20), 2-diphenylphosphanylethanol (22), and 1-diphenylphosphanylpropan-2-ol (24), afforded octahedral iridium complexes 9, 12, 15, 17, 19, 21, 23 and 25, respectively. Complex 10, which contains three different ligands (L₁ = N^∧C of 1; L₂ = N^∧C of 4,4′-dimethyl-[2,2′]bipyridinyl 4; L₃ = O^∧O of 2,4-pentanedione), and complex 11, which contains no cyclometalated ligands (L₁ = 4; L₂ = L₃ = Cl; L₄ = O^∧O of 2,4-pentanedione) were also isolated as minor products in a one-pot reaction between a 94:5 mixture of 1 and 4, IrCl₃ and lithium 2,4-pentanedionate. Reaction of 8 with diphenylphosphanylmethanol (27) in 1,2-dichloroethane unexpectedly led to complexes 28 and 29. The reactions of 8 with benzoylformic acid resulted in the formation of hydroxyl-bridged dimer [N^∧C]₂Ir(μ-OH)₂Ir[C^∧N]₂ (33). According to X-ray analyses, Ir-to-Ir distances in the crystal cell increase from 6.86 Å for 10 to 13.31 Å for 33. The angle theta, which represents the twisting of two cyclometalated C-Ir-N planes relative to each other, varies from 97.5° for 21 to 90.76 for complex 28. OLED devices were fabricated from several Ir complexes and preliminary results are discussed.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Investigation on coordination modes of organotin(IV) complexes with 6-thiopurine and related ligands

The organotin(IV) complexes R₂Sn(tpu)₂ · L [L = 2MeOH, R = Me (1); L = 0: R = n-Bu (2), Ph (3), PhCH₂ (4)], R₃Sn(Hthpu) [R = Me (5), n-Bu (6), Ph (7), PhCH₂ (8)] and (R₂SnCl)₂ (dtpu) · L [L = H₂O, R = Me (9); L = 0: R = n-Bu (10), Ph (11), PhCH₂ (12)] have been synthesized, where tpu, Hthpu and dtpu are the anions of 6-thiopurine (Htpu), 2-thio-6-hydroxypurine (H₂thpu) and 2,6-dithiopurine (H₂dtpu), respectively. All the complexes 1-12 have been characterized by elemental, IR, ¹H, ¹³C and ¹¹⁹Sn NMR spectra analyses. And complexes 1, 2, 7 and 9 have also been determined by X-ray crystallography, complexes 1 and 2 are both six-coordinated with R₂Sn coordinated to the thiol/thione S and heterocyclic N atoms but the coordination modes differed. As for complex 7 and 9, the geometries of Sn atoms are distorted trigonal bipyramidal. Moreover, the packing of complexes 1, 2, 7 and 9 are stabilized by the hydrogen bonding and weak interactions.     

Spectroscopic and structural characterization of cationic N-(2-aminoethyl)aziridine-N,N′ chelate complexes of the d-metals Rh(III) and Ir(III)

The syntheses of the compounds [M(Cp^∗)(aeaz)(az)](OTf)₂ (4, 5) (M = Rh(III), Ir(III); aeaz = C₂H₄NC₂H₄NH₂, az = C₂H₄NH (3)) containing cationic N-(2-aminoethyl)aziridine-N,N′ chelate complexes are described. The bis-aziridine complexes [MCl(Cp^∗)(az)₂]Cl (M = Rh (1), M = Ir (2)) react with an excess of the aziridine (az) in the presence of AgO₃SCF₃ (=AgOTf) via AgCl precipitation and az addition followed by a metal-mediated coupling reaction, to give the compounds [M(Cp^∗)(aeaz)(az)](OTf)₂ (4, 5). The new aeaz ligand is formally the dimerisation product of az. Using the same reaction conditions with the analogous, but weaker Lewis acidic ruthenium(II) complex [RuCl(C₆Me₆)(az)₂]Cl (6) an anion exchange reaction yielding [RuCl(C₆Me₆)(az)₂]OTf (8) is observed. After purification, all compounds are fully characterized using IR, FAB-MS, ¹H and ¹³C NMR spectroscopy. The single crystal X-ray structure analysis reveals a distorted octahedral geometry for all complexes.     

Oxovanadium(IV) and (V) complexes of acetylpyridine-derived semicarbazones exhibit insulin-like activity

Reaction of 2-acetylpyridine semicarbazone (H2APS), 3-acetylpyridine semicarbazone (H3APS) and 4-acetylpyridine semicarbazone (H4APS) with [VO(acac)₂] (acac = acetylacetonate) gave [VO(H2APS)(acac)₂] (1), [VO(H3APS)(acac)₂] (2) and [VO(4APS)(acac)(H₂O)] · 1/2H₂O (3). Oxidation of complex 1 in acetonitrile gave [VO₂(2APS)] (4). The crystal structures of complexes 1 and 4 have been determined. Complexes 1–3 were able to enhance glucose uptake and to inhibit glycerol release from adipocytes, which indicate their potential to act as insulin-mimics.     

Syntheses,structures and hydrolytic properties of copper(II) complexes of asymmetrically N-functionalised 1,4,7-triazacyclononane ligands

A series of new asymmetrically N-substituted derivatives of the 1,4,7-triazacyclononane (tacn) macrocycle have been prepared from the common precursor 1,4,7-triazatricyclo[5.2.1.0^4,10]decane: 1-ethyl-4-isopropyl-1,4,7-triazacyclononane (L1), 1-isopropyl-4-propyl-1,4,7-triazacyclononane (L2), 1-(3-aminopropyl)-4-benzyl-7-isopropyl-1,4,7-triazacyclononane (L3), 1-benzyl-4-isopropyl-1,4,7-triazacyclononane (L4) and 1,4-bis(3-aminopropyl)-7-isopropyl-1,4,7-triazacyclononane (L5). The corresponding monomeric copper(II) complexes were synthesised and were found to be of composition: [Cu(L1)Cl₂] · 1/2 H₂O (C1), [Cu(L4)Cl₂] · 4H₂O (C2), [Cu(L3)(MeCN)](ClO₄)₂ (C3), [Cu(L5)](ClO₄)₂ · MeCN · NaClO₄ (C4) and [Cu(L2)Cl₂] · 1/2 H₂O (C5). The X-ray crystal structures of each complex revealed a distorted square-pyramidal copper(II) geometry, with the nitrogen donors on the ligands occupying 3 (C1 and C2), 4 (C3) or 5 (C4) coordination sites on the Cu(II) centre. The metal complexes were tested for the ability to hydrolytically cleave phosphate esters at near physiological conditions, using the model phosphodiester, bis(p-nitrophenyl)phosphate (BNPP). The observed rate constants for BNPP cleavage followed the order k_C1 ≈ k_C2 > k_C5 ? k_C3 > k_C4, confirming that tacn-type Cu(II) complexes efficiently accelerate phosphate ester hydrolysis by being able to bind phosphate esters and also form the nucleophile necessary to carry out intramolecular cleavage. Complexes C1 and C2, featuring asymmetrically disubstituted ligands, exhibited rate constants of the same order of magnitude as those reported for the Cu(II) complexes of symmetrically tri-N-alkylated tacn ligands (k ∼ 1.5 × 10⁻⁵ s⁻¹).     

Syntheses, characterization and crystal structures of di- and triorganotin (IV) derivatives with 6-amino-1,3,5-triazine-2,4-dithiol

A series of organotin (IV) complexes with 6-amino-1,3,5-triazine-2,4-dithiol of the type [(R_nSnCl_4−n)₂ (C₃H₂N₄S₂)] (n = 3: R = Me 1, n-Bu 2, PhCH₂3, Ph 4; n = 2: R = Me 5, n-Bu 6, PhCH₂7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. Among them complexes 1, 4, 5 and 8 have also been characterized by X-ray crystallography diffraction analyses, which revealed that the tin atoms of complexes 1, 4, 5 and 8 are all five-coordinated with distorted trigonal bipyramid geometries.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

Synthesis and structural aspects of M-allyl (M = Ir, Rh) complexes

The synthesis, characterization and chemistry of novel η³-allyl metal complexes (M = Ir, Rh) are described. The structures of compounds (C₅Me₄H)Ir(PPh₃)Cl₂ (1), (C₅Me₄H)Ir(PPh₃)(η³-1-methylallyl)Br (3a), (C₅Me₄H)Ir(η⁴-1,3,5-hexatriene) (8), and (C₅Me₅)Rh(η³-1-ethylallyl)Br (5d) have been determined by X-ray crystallography. Structural comparisons among these complexes are discussed. It is found that the neutral metal allylic complex [Cp^∗IrCl(η³-methylallyl)] (5) ionizes in polar solvents to give [Cp^∗Ir(η³-methylallyl)]⁺Cl⁻ (6) and reaches equilibrium (5 ? 6) at room temperature. Addition of tertiary phosphine ligands to neutral complexes such as [Cp^∗Ir(η³-methylallyl)Cl], results in the formation of stable ionic phosphine adducts. Factors such as solvent, length of carbon chain, temperature and light are discussed with respect to the formation, stability and structure of the allyl complexes.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).