Temperature dependence on recrystallisation of the magnesium phthalocyanine (MgPc) in triethylamine

Three complexes of magnesium phthalocyaninato(2−) derivatives in the crystalline form, MgPc(H₂O)·(C₂H₅)₃N – (I), MgPc(H₂O)₂·2(C₂H₅)₃N – (II) and MgPc(H₂O)₂ – (III), depending on the thermal recrystallisation conditions were obtained and structurally characterised. In complex I, the Mg center exhibits square-pyramidal (4 + 1) coordination environment, whereas in II and III the Mg center of MgPc the biaxial (4 + 2) coordination. Owing to the interaction of the positively charged Mg center with oppositely charged oxygen atom of water molecule in an axial position in I, the Mg atom is significantly displaced (0.451(2) Å) from the plane defined by four isoindole N atoms and leads to distortion of the planar Pc(2−) macrocycle to the saucer-shape form. In II and III due to the biaxial (4 + 2) coordination of the Mg center of MgPc, the Mg atom lies on a N₄-isoindole plane. The triethylamine solvent molecules in I and II interact with mono or bis(aqua)magnesium phthalocyanine via   O–H?$?$N hydrogen bonds. The axial Mg–O bond in I is significantly shorter than that in the II and III complexes. The strength of the Mg–O bond in these complexes is correlated with their thermal stability. From among the complexes only complex I exhibits an intense near-IR absorption band in the solid-state. The spectra of I, II and III in solution are very similar.     

Synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes tetra-substituted with 3,4-(methylendioxy)-phenoxy

The synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes, tetra-substituted with 3,4-(methylendioxy)-phenoxy at the peripheral (complexes 3 and 5) and non-peripheral (complexes 4 and 6) positions, are reported. Complexes 3 and 4 showed Q-band absorption, in DMF, at 668 and 686 nm, respectively while Q-band due to complexes 5 and 6 appeared at 732 and 760 nm, respectively in CHCl₃. All the complexes showed well resolved redox processes attributed to both metal and ring based processes. Complexes 3 and 4 showed four redox processes, labeled I, II, III and IV. For complex 3, process I (Co^IPc⁻²/Co^IPc⁻³) was observed at −1.45 V, II (Co^IIPc⁻²/Co^IPc⁻²) at −0.38 V, III (Co^IIIPc⁻²/Co^IIPc⁻²) at +0.49 V and IV (Co^IIIPc⁻¹/Co^IIIPc⁻²) at +0.97 V versus Ag|AgCl. Similar processes were observed for complex 4 at −1.36 V, −0.27 V, +0.56 V, +1.03 V versus Ag|AgCl, respectively. Complexes 5 and 6 showed two redox processes (I and II). For complex 5, these processes appeared at −0.79 V (Mn^IIPc⁻²/Mn^IIPc⁻³, I) and −0.07 V versus Ag|AgCl (Mn^IIIPc⁻²/Mn^IIPc⁻², II), while for complex 6, they were observed at −0.86 V and −0.04 V versus Ag|AgCl. Spectroelectrochemistry was used to probe and confirm the origin of these processes.     

Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Synthesis and properties of soluble and light-colored poly(amide-imide-imide)s based on tetraimide-dicarboxylic acid (TIDA) and various aromatic diamines: TIDA from 4,4′-oxydiphthalic anhydride, 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene, and 3-aminobenzoic acid

A new tetraimide-dicarboxylic acid (TIDA) I was synthesized starting from 3-aminobenzoic acid (m-ABA), 4,4′-oxydiphthalic anhydride (ODPA), and 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene (BAFPB) at a 2:2:1 molar ratio in N-methyl-2-pyrrolidone (NMP). A series of organosoluble, light-colored poly(amide-imide-imide)s (PAII, III_a-j) was prepared by triphenyl phosphite-activated polycondensation from the tetraimide-diacid I with various aromatic diamines (II_a-j). All the polymers were readily soluble in a variety of organic solvents such as NMP, N,N-dimethyl acetamide (DMAc), dimethyl sulfoxide, and even in less polar m-cresol and pyridine. Polymer films cast from DMAc had the cutoff wavelengths between 374 and 384 nm and had the b^∗ values in the range of 14.8-30.2. Polymers III_a-j afforded tough, transparent, and flexible films, which had tensile strengths ranging from 87 to 103 MPa, elongations at break from 11% to 37%, and initial moduli from 1.9 to 2.3 GPa. The glass transition temperatures of these polymers were in the range of 242-274 °C. They had 10% weight loss temperature above 526 °C and showed the char yield more than 55% residue at 800 °C in nitrogen.     

Coordination behavior of 3,4-bis(2-pyridylmethylthio)toluene with copper(II) ions: Synthesis,structural characterization and reactivity,and DNA binding study of the dinuclear copper(II) complex

On reaction of different copper(II) salts with 3,4-bis(2-pyridylmethylthio)toluene (L) having neutral tetradentate NSSN donor set in different chemical environments, two mononuclear copper(II), one dinuclear copper(I) and one dinuclear copper(II) complexes, formulated as [Cu^II(L)(H₂O)₂](NO₃)₂ (1), [Cu^II(pic)₂] (2), [Cu^I₂(L)₂](ClO₄)₂ (3) and [Cu^II₂(L)₂Cl₂](ClO₄)₂ (4), respectively, were isolated in pure form [where pic = picolinate]. All the complexes were characterized by physicochemical and spectroscopic methods. The product of the reactions are dependent on the counter anion of copper(II) salts used as reactant and on the reaction medium. Complexes 1 and 4 were obtained with nitrate and perchlorate copper(II) salts, respectively. On the other hand, C–S bond cleavage was observed in the reaction of L with copper(II) chloride to form in situ picolinic acid and complex 2. Dinuclear complexes 3 and 4 were separated out when copper(II) perchlorate was allowed to react with L in methanol and in acetonitrile, respectively, under aerobic condition. The X-ray diffraction analysis of the dinuclear complex 3 shows a highly distorted tetrahedral geometry about each copper ion. Complex 4 is converted to 3 in acetonitrile in presence of catechol. The spectral study of complex 4 with calf thymus DNA is indicative of a groove binding mode interaction.     

Interaction of hexafluorosilicic acid with sulfa drugs. Bis(sulfathiazolium) hexafluorosilicate: Spectral data and crystal structure

Interaction of hexafluorosilicic acid with sulfa drugs sulfathiazole (stz) and sulfalen (2-sulfanilamido-3-methoxypyrazine, sl) results in the crystalline salts of the compositions [stzH]₂[SiF₆] (I) and [4-H₂NO₂SPhNH₃]₂[SiF₆] (II). Complex I is characterized by IR, mass spectrometry data and single crystal X-ray diffraction. The crystal structure of I is stabilized by a network of charge-assisted hydrogen bonding. The relationship between the solubility and H-bonding system in I, II and related “onium” hexafluorosilicates is discussed. The formation of complex II, previously reported as an interaction product of hexafluorosilicic acid with 4-aminobenzenesulfonamide (sulfanilamide), is the result of cleavage of the C-N bond in sulfalen in acidic medium.     

Ring-opening metathesis polymerization (ROMP) of N-cycloalkyl-7-oxanorbornene dicarboximides by well-defined ruthenium initiators

Ring-opening metathesis polymerization (ROMP) of exo-N-(1-adamantyl)-7-oxanorbornene-5,6-dicarboximide (AdONDI) (3a), exo-N-cyclohexyl-7-oxanorbornene-5,6-dicarboximide (ChONDI) (3b) and exo-N-phenyl-7-oxanorbornene-5,6-dicarboximide (PhONDI) (3c) using well-defined alkylidene ruthenium catalysts (PCy₃)₂(CI)₂RuCHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy₃)CI₂RuCHPh (II) was studied. The catalysts I and II gave polymers with around 70% and 50% trans vinylene content, respectively. The homopolymer of 3a had a T_g of 198 °C, while poly-3b showed a T_g of 122 °C. Copolymers of 3a, 3b and 3c with norbornene (NB) showed significant T_g increases over poly-NB.     

Syntheses, electrochemical and spectroelectrochemical properties of novel ball-type and mononuclear Co(II) phthalocyanines substituted at the peripheral and non-peripheral positions with binaphthol groups

Mononuclear cobalt phthalocyanine (CoPc) substituted at the non-peripheral 8 and peripheral positions 9 with 1,1′-binaphthyl-8,8′-diol and ball-type dinuclear Co₂Pc₂ substituted at the non-peripheral 10 and peripheral 11 positions with the same substituent are reported. The complexes with 1,1′-binaphthol-bridges were prepared from the corresponding phthalonitriles 4-7. The effects of the position of substituent on spectral, electrochemical and spectroelectrochemical properties of these complexes were also explored. The mononuclear complexes 8 and 9 exhibited one metal reduction, one ring reduction and one ring oxidation. The redox properties of the ball-type complexes 10 and 11 exhibited two reduction processes assigned to [(Co^IPc⁻²)₂]²⁻/[(Co^IPc⁻³)₂]⁴⁻ (I), (Co^IIPc⁻²)₂/[(Co^IPc⁻²)₂]²⁻ (II) and one oxidation process assigned to [(Co^IIIPc⁻²)₂]²⁺/Co^IIPc⁻²)₂ (III). The ball-type complexes are much easier to oxidize and more difficult to reduce than the corresponding monomers 8 and 9.     

Synthesis, structural, spectroscopic and reactivity properties of a new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine ligand and its Cu(II) and Pd(II) complexes

A new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine (1) complexes with Cu(II) (2) and Pd(II) (3) have been synthesized and characterized by X-ray crystallography, UV-Vis, IR, ¹H NMR and EPR spectroscopic techniques. The X-ray crystal structure of complex 2 reveals tetrahedrally distorted square-planar coordination geometry around Cu(II). The UV/Vis and EPR results indicate that the solid state geometry of 2 remains unchanged in solutions. Chemical oxidation of 3 with Ce(IV) in CHCl₃ generates relatively stable Pd(II)-phenoxyl radical complex (g = 2.0073). The results related with the chemical oxidation of 2 and 3 as well as the catalytic activity of 3 in the hydrogenation of PhNO₂ are presented.     

Synthesis, structures and some chemical and electrochemical properties of E-1,2-diferrocenyl-3-methylthioprop-2-enone and its ketals

2,3-Diferrocenyl-1-methylthiocyclopropenylium iodide reacts with water, metal alkoxides, phenolates and with alcohols in the presence of Et₃N to give E-1,2-diferrocenyl-3-methylthioprop-2-enone or its ketals. Their structures were established based on data from ¹H and ¹³C NMR spectroscopy and X-ray diffraction analysis. The mechanistic aspects of these reactions are discussed. Electrochemical properties of 8 and 13b have been studied. The compounds present two oxidation processes (I-II), attributed to the oxidations of the ferrocenes groups, E^0′(I), E^0′(II), ΔE^0′(II-I) and comproportionation constant K_com are reported.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Colorless poly(ether-imide)s deriving from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and aromatic bis(ether amine)s bearing pendent trifluoromethyl groups

A series of poly(ether-imide)s (III) characterized by colorless, highly solubility was synthesized from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride(BPADA) and various fluorinated aromatic diamines (I_a-h) in DMAc via polycondensation to form poly(amic acid) (II), followed by chemical (C) and thermal (H) imidization. These polymers had inherent viscosities ranging from 0.60 to 1.3 dL/g. These polyimides were highly soluble in a variety of organic solvent such as amide-type, ether-type and chlorinated solvents. Moreover, these poly(ether-imide) films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 390 nm and low b* value (a yellowness index) of 4.6-18.0. The III series showed strength tensile of 72-101 MPa, elongation at break of 11-25%, initial modulus of 1.5-2.0 GPa. The glass transition temperature (T_g) of III_a-h were in the range of 202-267 °C, and the decomposition temperature above 493 °C and left 40-65% char yield at 800 °C in nitrogen. They had the lower dielectric constants of 3.39-3.72 (1 MHz) and moisture absorptions in the range of 0.11-0.40%.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

Preparation and reactivity of polyfunctional six- and eight-membered cyclic silicates

Six- and eight-membered cyclic silicates with reactive SiH or Si-vinyl functional groups have been prepared: hexakis(dimethylsiloxy)cyclotrisiloxane (I), hexakis(vinyldimethylsiloxy)cyclotrisiloxane (II), octakis(dimethylsiloxy)cyclotetrasiloxane (III) and octakis(vinyldimethylsiloxy)cyclotetrasiloxane (IV). Reaction of pseudo wollastonite (Ca₃Si₃O₉) with dimethylchlorosilane or vinyldimethylchlorosilane gives I and II, respectively. IV has been prepared similarly by reaction of octakis[chloro calcium oxy]cyclotetrasilicate [Ca₈Si₄O₁₂Cl₈] with vinyldimethylchlorosilane. On the other hand, acid catalyzed siloxane exchange between tetramethyldisiloxane and octakis(trimethylsiloxy)cyclotetrasiloxane (V) gave III. Cyclic silicates (I-VI) are surprisingly resistant to acid catalyzed ring opening polymerization. In addition, II, IV, V and hexakis(trimethylsiloxy)cyclotrisiloxanes (VI) are resistant to phosphazene P₄-t-Bu superbase catalyzed ring opening polymerization.     

Novel organosoluble and colorless poly(ether imide)s based on 1,1-bis[4-(3,4-dicarboxyphenoxy)phenyl]cyclohexane dianhydride and trifluoromethyl-substituted aromatic bis(ether amine)s

A series of novel fluorinated poly(ether imide)s (IV) having inherent viscosities of 0.70-1.08 dL/g were prepared from 1,1-bis[4-(3,4-dicarboxyphenoxy)phenyl]cyclohexane dianhydride (I) and various trifluoromethyl (CF₃)-substituted aromatic bis(ether amine)s II_a-g by a standard two-step process with thermal and chemical imidization of poly(amic acid) precursors. These poly(ether imide)s showed excellent solubility in many organic solvents and could be solution-cast into transparent, flexible, and tough films. These films were essentially colorless, with an ultraviolet-visible absorption edge of 375-380 nm and a very low b^∗ value (a yellowness index) of 5.5-7.3. They also showed good thermal stability with glass-transition temperatures of 207-269 °C, 10% weight loss temperatures in excess of 474 °C, and char yields at 800 °C in nitrogen more than 62%. In comparison with analogous V series poly(ether imide)s without the -CF₃ substituents, the IV series polymers showed better solubility, lower color intensity, and lower dielectric constants.     

Synthesis,structure and physical properties of trinuclear M3tdt3(PEt3)3 (M = Fe,Co) clusters containing metal–metal bonds

Trinuclear M₃tdt₃(PEt₃)₃ (M = Fe^II for I, Co^II for II) clusters have been synthesized from the reaction between M(PEt₃)₂Cl₂ and Na₂tdt (tdt = toluene-3,4-dithiolate) in MeCN. Both complexes have been characterized by elemental analyses, FT-IR, UV–Vis, FAB-MS, ¹H NMR and cyclic voltammetry. Structures of Fe₃tdt₃(PEt₃)₃ (I) and Co₃tdt₃(PEt₃)₃ (II) were determined by single crystal X-ray crystallography. The Fe₃ triangular core of the 48-electron complex I, with an isosceles triangular geometry, showed very short Fe–Fe distances of 2.4014(13) and 2.4750(12) Å, which are comparable to the extensive M–M frameworks found in the FeMo-cofactor in nitrogenase. The isostructural Co₃tdt₃(PEt₃)₃ (II), with an analogous Co₃ coordination geometry, showed short Co–Co distances of 2.4442(9) and 2.5551(10) Å. The slightly longer M–M distances in complex II were explained by a total valence electron counting argument. Cyclic voltammetry of Fe₃tdt₃(PEt₃)₃ (I) showed robust reduction waves compared to Co₃tdt₃(PEt₃)₃ (II). Temperature-dependent effective magnetic moment measurements of I and II showed both clusters behave similarly and the magnetic property of the M₃ equilateral triangle core with extensive metal–metal interactions was characterized as degenerate frustration.     

Syntheses, crystal structures and properties of Co(II) complexes with N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine (bpb), and Cd(II), Hg(II) complexes with reduced bpb

Five novel coordination polymers, [Co(bpb)₂Cl₂] (1), [Co(bpb)₂(SCN)₂] (2), [Cd(H₄bpb)_0.5(dmf)(NO₃)₂] (3), [Cd₂(H₄bpb)Br₄] (4), and [Hg₂(H₄bpb)I₄] (5) [bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine, H₄bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethylamine], were synthesized and their structures were determined by X-ray crystallography. In the solid state, complex 1 is a 1D hinged chain, while 2 has 2D network structure with the ligand bpb serving as a bridging ligand using its two pyridyl N atoms. The imine N atoms keep free of coordination and bpb acts as a bidentate ligand in both 1 and 2. Complexes 3, 4, and 5 with reduced bpb ligand, i.e. H₄bpb, show similar 2D network structure, in which ligand H₄bpb serves as a tetradentate ligand. Thermogravimetric analyses for complexes 1-5 were carried out and found that they have high thermal stability. The magnetic susceptibilities of compounds 1, 2 were measured over a temperature range of 75-300 K.     

1D coordination polymers of silver(I) and copper(II) based on bis(N-heterocyclic carbene) ligands: Synthesis and structural studies

The alkyl chain-linked diimidazolium (or dibenzimidazolium) salts, 1,1′-diethyl-4,4′-tetramethylene-diimidazolium-diiodide (L¹H₂·I₂) and 1,1′-diethyl-3,3′-trimethylene-dibenzimidazolium-diiodide (L²H₂·I₂), and their silver(I) and copper(II) coordination polymers, [L¹AgI]_n (1) and [L²Cu₂I₄]_n (2), have been prepared and characterized. Complex 1 is a 1D helical polymer generated by bidentated carbene ligands (L¹) and Ag(I) atoms. The 1D polymer of 2 is formed by bidentated carbene ligands (L²) and coplanar quadrilateral Cu₂I₂ units. 3D supramolecular frameworks in the crystal packings of 1 and 2 are formed via intermolecular weak interactions, including C–H···π contacts, π–π interactions and C–H···I hydrogen bonds.     

Syntheses,IR spectra,thermal properties and crystal structures of novel cyano-bridged polymeric complexes of zinc and cadmium with tetracyanoplatinate

Two novel one-dimensional polymeric cyano-bridged platinum(II) complexes of N-(2-hydroxyethyl)-ethylenediamine (hydeten), [M^II(hydeten)Pt(CN)₂(μ-CN)₂]_n (M^II = Zn^II (1) and Cd^II (2)), were synthesized and characterized by physico-chemical methods (elemental analysis, IR spectroscopy and thermoanalytical measurements) and X-ray diffraction. Thermal behaviours of 1 and 2 were followed using TG and DTA (DSC) techniques. The 1D chain structures of 1 and 2 were verified by X-ray diffraction studies. According to the positions of the bridging cyano groups, in complex 1 the polymeric chains are built up via the 2,2-CT type, while in complex 2 the polymeric chains are built up via the 2,2-TT type.