First example of the <Emphasis Type="Italic">anti</Emphasis>-Markownikoff addition of tellurium tetrachloride to terminal acetylene,trimethyl ethynyl silane

(μ₂-Oxo)-bis[dichloro(Z-2-chloro-1-trimethylsilylethenyl)tellurium(IV)] (III) was prepared by electrophilic addition of TeCl₄ to trimethylethynylsilane in CHCl₃ at room temperature. The reaction is the first example of the anti-Markownikoff type addition of TeCl₄ to terminal acetylenes affording as an intermediate the 1:1 adduct [Z-1-(trimethylsilyl)-2-chlorovinyl]tellurium trichloride (II). The latter is converted into III by a sequence of successive reactions of hydrolysis and dehydration. The structure of compound III was proved by the of multinuclear (¹H, ¹³C, ²⁹Si, ¹²⁵Te) NMR spectroscopy and XRD analysis. Compound III is the first example of structurally characterized C-TeCl₂-O fragment.     

A facile stereoselective synthesis of difunctionalized 1,3-dienes containing tin and halogen via hydrozirconation of (Z)-3-(tributylstannyl)alk-3-en-1-ynes

Sonogashira coupling of (E)-α-iodovinylstannanes 1 with (trimethylsilyl)acetylene gave (Z)-1-(trimethylsilyl)-3-(tributylstannyl)alk-3-en-1-ynes 2, which underwent a desilylation reaction to afford (Z)-3-(tributylstannyl)alk-3-en-1-ynes 3 in high yields. (1E,3Z)-1-Halo-3-(tributylstannyl)-substituted 1,3-dienes 5 could be synthesized stereoselectively via hydrozirconation of (Z)-3-(tributylstannyl)alk-3-en-1-ynes 3, followed by trapping with iodine or NBS.     

A novel method for (Z)-stereoselective preparation of CF3-substituted enediynes and their coupling reactions

Trifluoromethylated enynyl sulfones 3 were reacted with 2-4 equiv of phenyl, n-hexyl, trimethylsilyl, or triisopropylsilyl substituted ethynyllithium reagents in THF or ether at 0 °C to give trifluoromethylated enediynes 6 (Z)-stereoselectively in 41-96% yields. The reactions of β-fluoro-β-trifluoromethylvinyl sulfone 5 with same ethynyllithium reagents (4 equiv) afforded the corresponding enediynes 6 in 41-90% yields. The cross-coupling reactions of 6 bearing TMS group with aryl iodides in the presence of Pd(PPh₃)₂Cl₂, Ag₂CO₃, and n-Bu₄NBr provided the corresponding enediynes 6 in 20-71% yields. Dimerization of (Z)-6 bearing TMS group in the presence of CuBr₂ and K₂CO₃ yielded dimer (Z,Z)-7 in good yield.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Synthesis of the first 1,3-disubstituted 1,3-butadienyl heteroannular bridged [4]ferrocenophane

An unusual heteroannular cyclization of methyl 4-(((1′-(trimethylsilyl)ethynyl)ferrocenyl)ethynyl)benzoate (11) under the basic desilylation condition yielded 1,1′-(l-methoxy-3-(4′-(methoxycarbonyl)phenyl)-1,3-butadienylene)ferrocene (7), the first reported 1,3-disubstituted 1,3-butadienyl heteroannular bridged [4]ferrocenophane. Compound 7 has been characterized by elemental analysis, IR spectra, ¹H NMR spectroscopy and X-ray diffraction analysis. The electrochemical behavior has been investigated by cyclic voltammetry. The DFT calculation results of 7 are also reported.     

Furan derivatives of tellurium: Synthesis and structural comparison with the thiophene analogues

α-Bromo-2-acetylfuran adds oxidatively to elemental tellurium and aryltellurium(II) bromide at ambient temperature to afford (2-furoylmethyl)tellurium(IV) dibromides, (FuCOCH₂)₂TeBr₂ (1b) and Ar(FuCOCH₂)TeBr₂ (Fu = 2-C₄H₃O; Ar = 1-C₁₀H₇, 2b; 2,4,6-Me₃C₆H₂, 3b). The iodo analogues 1c-3c can be obtained by metathesis of the bromides with an alkali iodide. Condensation reactions of the parent methyl ketone with Te(IV) chlorides results in the corresponding chloro analogues, (FuCOCH₂)₂TeCl₂ (1a) and Ar(FuCOCH₂)TeCl₂ (2a, 3a and Ar = 4-MeOC₆H₄ (4a)). These diorganotellurium dihalides are reduced with aqueous bisulfite to diorganotellurides 1-3, which can be oxidized readily with dihalogens to the desired diorganotellurium(IV) dihalides. The tellurated furan derivative, bis(2-furyl)tellurium(II), Fu₂Te (5), obtained by detelluration of bis(2-furyl)ditelluride with electrolytic copper, gives crystalline bis(2-furyl)tellurium(IV) dichloride (5a) upon chlorination. Crystal structures of Te(IV) compounds 1a, 1b, 2a-4a, and the telluride 3 together with its thiophene analogue (2,4,6-Me₃C₆H₂)((2-C₄H₃S)COCH₂)Te, 6 have been studied. Among the Te(IV) compounds, the functionalized organic moiety, FuCOCH₂-, behaves as a (C, O) chelating ligand, resulting in a intramolecular 1,4-Te?O secondary bonding interaction. Such an interaction is absent in Te(II) compounds 3 and 6, though they differ in the conformation adopted by the organic ligand. The chalcogen atoms in the heteroaroyl moiety are trans in 3 but cis in 6 which also possesses intermolecular Te?O interaction in its lattice.     

Antimony(V) catecholato complexes based on 4,5-dialkylsubstituted o-benzoquinone. The spectroscopic and electrochemical studies. Crystal structure of [Ph4Sb][Ph2Sb(4,5-Cat)2]

Triphenylantimony(III) and triethylantimony(III) readily react with 4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-o-benzoquinone to form catecholato complexes R₃Sb(4,5-Cat) (R = Ph (1), Et (2); 4,5-Cat is dianionic 4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-catecholate). In polar solvents (CHCl₃, acetone) complex 1 transforms easily to ionic complex compound [Ph₄Sb]⁺[Ph₂Sb(4,5-Cat)₂]⁻ (3) with diphenyl-bis-[4,5-(1,1,4,4-tetramethyl-butane-1,4-diyl)-catecholato]antimony(V) complex anion. Complexes were characterized by IR, ¹H, ¹³C NMR spectroscopy, cyclic voltammometry. Molecular structure of 3·CHCl₃ was confirmed by X-ray analysis. Cyclic voltammometry of 1 and 3 shows that both complexes undergo reversible one-electron oxidation to quite stable paramagnetic o-semiquinonato species [Ph₃Sb(4,5-SQ)]⁺ and [Ph₂Sb(4,5-SQ)(4,5-Cat)] (0.75 and 0.49 V in CH₂Cl₂ vs. Ag/AgCl/KCl, respectively).     

Preparation of 1,1-disubstituted silacyclopentadienes

Several new 1,1-disubstituted siloles containing substituents on the ring carbon atoms have been synthesized. The new siloles: 1,1-dihydrido-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (5), 1,1-dihydrido-2,5-dimethyl-3,4-diphenylsilole (6), 1,1-dimethoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (7), 1,1-bis(4-methoxyphenyl)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (8), 1,1-dipropoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (9), and 1,1-dibromo-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (13) were prepared from reactions originating from the previously reported, 1,1-bis(diethylamino)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (1) or 1,1-bis(diethylamino)-2,5-dimethyl-3,4-diphenylsilole (2). In addition, three other new organosilane byproducts were observed and isolated during the current study, bis(4-methoxyphenyl)bis(phenylethynyl)silane (11), bis(4-methoxyphenyl)di(propoxy)silane (12) and 1-bromo-4-bromodi(methoxy)silyl-1,4-bis(trimethylsilyl)-3,4-diphenyl-1,3-butadiene (14). Compounds 13 and 14 were characterized by X-ray crystallography and 14 is the first 1,1-dibromosilole whose solid state structure has been determined.     

Novel tricarbonyl rhenium complexes of 5,8-quinolinedione derivatives - Synthesis, spectroscopic characterisation, X-ray structure and DFT calculations

The molecular structure of 7-acetamido-2-methyl-quinoline-5,8-dione has been determined and the reactivity of 7-acetamido-2-methyl-quinoline-5,8-dione (1) and 6-acetamido-2-methyl-quinoline-5,8-dione (2) towards Re(CO)₅Cl has been examined. Two novel tricarbonyl rhenium complexes, fac-[Re(CO)₃(7-acetamido-2-methyl-quinoline-5,8-dione)Cl]·CHCl₃ (3·CHCl₃) and fac-[Re(CO)₃(6-acetamido-2-methyl-quinoline-5,8-dione)Cl]₂·CHCl₃ (4·CHCl₃), have been synthesized and characterized spectroscopically and structurally. The electronic spectrum of 3 was investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.     

Synthesis of new imines and amines containing organosilicon groups

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyl lithium, (Me₃Si)₃CLi, in THF at 0 °C gives 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde (1) and 4,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene (2). The new aldehyde (1) reacts with variety of amines in ethanol to afford the corresponding imines (3) containing vinylbis(trimethylsilyl) group. The newly synthesized imines (3) can be completely converted into amines containing vinylbis(trimethylsilyl) group with an excess amount of NaBH₄. In the case of N-[4-(2,2-bis(trimethylsilyl)ethenyl)benzyl]-2,6-dimethylaniline LiAlH₄ was used as a reducing agent in THF.     

Stereospecific mono- and difluorination of the C7-bridge of norbornenes

Fluorinated norbornenes are very desirable monomers in the semiconductor and high-temperature polyimide industries. We describe herein a synthetic strategy for the stereospecific mono- or difluorination of the C₇-carbon in norbornene systems beginning with 7-ketonadic anhydride 1. In particular, anti-7-fluoro methyl diester 4 and its 7,7-difluoronadic analog 7 can be prepared from 1 in 3 or 4 steps: saponification, reduction (for 4), esterification, fluorination with DAST. In addition, anti-7-fluoro-syn-7-fluoromethylnadic diester 16 is obtained from epoxide 14, and dimethyl 7,7-difluorobicyclo[2.2.2]oct-5-ene-2,3-dicarboxylate (17) from ketone 15. Anchimeric assistance of the norbornene double bond guides the introduction of attacking fluoride anions stereospecifically anti to the olefinic linkage.     

Synthesis and thermal behavior of cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene

The cothermolysis of benzoyl(tert-butyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene in a sealed tube at 140 °C for 24 h afforded cis- and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (2 and 3) in a ratio of approximately 1:1 in 66% combined yield. When cis-silacyclohex-4-ene 2 was heated in a sealed tube at 250 °C for 24 h, dyotropic ring contraction took place to give 1-[(tert-butyl)(trimethylsiloxy)(trimethylsilyl)silyl]-3,4-dimethyl-1-phenylcyclopent-3-ene (4), but not trans-2-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclohex-4-ene (6). The thermolysis of trans-silacyclohex-4-ene 3 under the same conditions, however, afforded two products, 1-silyl-1-phenylcyclopent-3-ene 4 and trans-1-tert-butyl-4,5-dimethyl-2-phenyl-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclohex-4-ene (5). The theoretical calculations were carried out to characterize the transition states and other local minima, and to evaluate the activation energies for the dyotropic rearrangement of 2 to 4 and 6, and 3 to 4 and 5. The energy barriers between 2 and 4, between 3 and 4, and between 3 and 5 were evaluated to be 188, 191, 192 kJ mol⁻¹, respectively. The energy barrier between 2 and 6, however, was calculated to be 201 kJ mol⁻¹ or higher. These results are consistent with the experimental finding that the thermal isomerization of 2 affords only 4, but 3 produces both 4 and 5.     

Acid-catalyzed reactions of (3-(naphthalen-2-yl)-2,2-bis(trimethylsilyl)oxiran. A new synthesis of functional-group-substituted vinylsilanes

The magnesium bromide-diethyl etherate-catalyzed ring-opening of (3-(naphthalen-2-yl)-2,2-bis(trimethylsilyl)oxiran 2 with thiophenols affords (1-trimethylsilylvinyl)sulfides 3 and the (1-bromovinyl)silane 4. Nucleophilic attack occurs regioselectively at the position α- to silicon. The compound 2 has been converted into the (1-trimethylsilylvinyl)amide 5 with an excess of acetonitrile and into the (1-trimethylsilylvinyl)acetate 6 with acetic acid/acetic anhydride. These reactions proceed with catalytic amounts of boron trifluoride-diethylether. Treatment of 2 with acetic acid alone gives naphthaldehyde. The epoxide 2 reacts also with MgBr₂·OEt₂, MeLi/CuI, HX (XBr or Cl) and LiAlH₄ with nucleophilic attack at the bis(trimethylsilyl)-substituted carbon.     

Silicon-carbon unsaturated compounds. 77. Thermal behavior of cis- and trans-1-silacyclobut-3-ene formed from pivaloyl[tert-butylbis(trimethylsilyl)]silane and tert-butylacetylene

The reaction of tert-butylbis(trimethylsilyl)silyl potassium with pivaloyl chloride gave pivaloyl[tert-butylbis(trimethylsilyl)]silane (1) in 89% yield. The cothermolysis of 1 with tert-butylacetylene at 140 °C for 24 h produced the mixture consisting of cis- and trans-1,2,3-tri(tert-butyl)-2-(trimethylsiloxy)-1-(trimethylsilyl)-1-silacyclobut-3-ene (cis-2 and trans-2) in a ratio of 0.7: 1, in 88% combined yield. The thermolysis of the mixture, cis-2 and trans-2, at 250 °C for 24 h proceeded to give trans-1,2,4-tri(tert-butyl)-1-(trimethylsiloxy)-2-(trimethylsilyl)-1-silacyclobut-3-ene (4) as a single product in 96% yield. Similar treatment of cis- and trans-2 at 190 °C for 15 h afforded silylcyclopropene 3 quantitatively, which underwent further isomerization at 250 °C to give trans-1-silacyclobut-3-ene 4 in quantitative yield.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Regioselective reactions of sulfur, selenium and tellurium chlorides with allyl trimethyl silane

Electrophilic addition of SCl₂, SeCl₂ and SeCl₄ to 2 equivalents of allyl trimethyl silane proceeds regioselectively to give bis[2-chloro-3-(trimethylsilyl)propyl] sulfide, selenide and selenium dichloride, respectively. The reaction with TeCl₄ affords only diallyl tellurium dichloride. The structures of the compounds were confirmed by ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR techniques.     

Intramolecularly donor-stabilized silenes: Part 5. Generation and conversion of 1-[2,6-bis(alkoxymethyl)phenyl]- and 1-(8-alkoxynaphthyl)-1,2,2-tris(trimethylsilyl)silenes

1-(8-Methoxy-1-naphthyl)-1,2,2-tris(trimethylsilyl)silene (10) and the 1-[2,6-bis(alkoxymethyl)phenyl]-1,2,2-tris(trimethylsilyl)silenes (12a-d) were generated by the reaction of (dichloromethyl)tris(trimethylsilyl)silane (1) with two molar equivalents of 8-methoxy-1-naphthyllithium or 2,6-bis(alkoxymethyl)phenyllithium (8a-d), respectively, but proved to be unstable. 10 was trapped with excess of the applied naphthyllithium reagent to give 1,1-bis(8-methoxy-1-naphthyl)-1-[bis(trimethylsilyl)methyl]-2,2,2-trimethyldisilane (11); and 12a-d underwent spontaneous conversions and formed two types of substituted 2-oxa-1-silaindane derivatives (13a,b and 14b-d). Whereas silenes with an intramolecular amine coordination are thermally stable compounds which can be isolated, the intramolecular coordination of an ether group to the electrophilic silene silicon atom does not provide a comparable stabilization to the SiC system and the respective derivatives generated were converted into resultant products.     

Diverse coordination of two ligands in ferromagnetic [Cu(μ-HCO2)2(3-pyOH)]n and [Cu2(μ-HCO2)2(μ-3-pyOH)2(3-pyOH)2(HCO2)2]n

Two novel polynuclear complexes with methanoate anions and 3-hydroxypyridine ligands [Cu(μ-HCO₂)₂(3-pyOH)]_n (1) and [Cu₂(μ-HCO₂)₂(μ-3-pyOH)₂(3-pyOH)₂(HCO₂)₂]_n (2), respectively, were synthesized and characterized. The central copper atom in 1 is surrounded by four methanoates and a 3-pyOH molecule, forming a square-pyramidal CuO₃NO chromophore. All the methanoates are bidentate and serve as bridges between the adjacent copper ions via syn-anti and anti–anti coordination. The basal square coordination axes are formed by O(syn), N(3-pyOH) (1.974(2), 2.016(2) Å) and O(anti), O(anti) (1.945(2), 1.960(2) Å), while the third O(anti) (2.247(2) Å) is on the top of the pyramid. A ferromagnetic transition with an exchange constant 2J/k_B = 9.2 cm⁻¹ is found for 1 below 20 K. This interaction probably takes place through two syn-anti methanoates extended in a chain through the 2D structure. On the other hand, two monoatomic Cu–O–Cu intra-dinuclear asymmetric (1.986(2), 2.415(2) Å) bridges of two methanoates in [Cu₂(HCO₂)₄(3-pyOH)₄] (2) are present. An elongated distorted octahedral coordination sphere around each copper(II) atom is completed by an additional monodentate terminal methanoate (1.975(2) Å), two N-coordinated 3-pyOH (2.005(2), 2.002(2) Å) and the third weakly O-coordinated 3-pyOH (2.732(2) Å). Although a shorter Cu?Cu distance is noticed in 2 than in 1 (4.690(1) Å 1, 3.442(1) Å 2), much weaker ferromagnetism is found in 2.     

A convenient synthesis of functionalized N-(ethynyl)benzotriazoles

1-(2,2-Dichlorovinyl)benzotriazole (7) was prepared by the reaction of 1-formylbenzotriazole with PPh₃/CCl₄. Lithiation-substitution of 7 with electrophiles gave a variety of functionalized N-(ethynyl)benzotriazoles 8a-h in 32-84% yields.     

Unexpected Ti-catalyzed formal intramolecular [4+4] cycloaddition of 1,1′-bi[(S,S)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl]

Reductive disilylation (Li+Me₃SiCl−THF) of 1,3,5-cycloheptatriene led to 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (2). In the presence of TiCl₄ in dichloromethane, 2 gave rise to a spherical molecule 5 resulting from an intramolecular formal [4+4] supra-supra cycloaddition.