Characterizing the dynamic behavior of nano-TiO<Subscript>2</Subscript> agglomerates in suspensions by photocorrelation spectroscopy

Metal oxide nanoparticles are small but easily form agglomerates in suspension, depending on the strength of particle–particle and particle–media interactions. To understand the agglomeration behavior of nanoparticles in media and relate to it to product performance testing, measurement methods are desired to characterize highly scattering metal oxide nanoparticle suspensions without dilution. In this article, we describe the advantages of using photocorrelation spectroscopy (PCS) in a backscattering detection configuration to carry out a realistic agglomerate size measurement in multiple scattering media found in most metal oxide nanoparticle suspensions. The dynamic behavior of nano-titanium dioxide (TiO₂) particles in buffer solutions of different chemical composition and pH values was investigated as a sample system using PCS. The resulting autocorrelation functions (AFs) at different time intervals, particle concentrations, and pH values were measured at several detection angles. The AF exhibits a multi-mode relaxation time feature and the calculated hydrodynamic diameters strongly depended on media composition and detection angle. This result indicates that the size and dispersion of nano-TiO₂ agglomerates are significantly affected by solution media. A measurement protocol for determining size and dispersion of metal oxide particles in media is proposed and related to a performance test found in industry.     

Quantitative characterization of TiO<Subscript>2</Subscript> nanoparticle release from textiles by conventional and single particle ICP-MS

TiO₂ is ubiquitously present in a wide range of everyday items, both as an intentionally incorporated additive and naturally occurring constituent. It can be found in a wide range of consumer products, including personal care products, food contact materials, and textiles. Normal use of these products may lead to consumer and/or environmental exposure to TiO₂, possibly in form of nanoparticles. The aim of this study is to perform a leaching test and apply state-of-the-art methods to investigate nano-TiO₂ and total Ti release from five types of commercially available conventional textiles: table placemats, wet wipes, microfiber cloths, and two types of baby bodysuits, with Ti contents ranging from 2.63 to 1448 μg/g. Released particle analysis was performed using conventional and single particle inductively coupled plasma mass spectrometry (ICP-MS and spICP-MS), in conjunction with transmission electron microscopy (TEM), to measure total and particulate TiO₂ release by mass and particle number, as well as size distribution. Less than 1% of the initial Ti content was released over 24 h of leaching, with the highest releases reaching 3.13 μg/g. The fraction of nano-TiO₂ released varied among fabric types and represented 0–80% of total TiO₂ release. Particle mode sizes were 50–75 nm, and TEM imaging revealed particles in sizes of 80–200 nm. This study highlights the importance of using a multi-method approach to obtain quantitative release data that is able to provide an indication regarding particle number, size distribution, and mass concentration, all of which can help in understanding the fate and exposure of nanoparticles.

Open image in new window

Graphical abstract ?

     

Application of TiO2 nano-particles on the electrode of dye-sensitized solar cells

In this study, nano-TiO₂ thin film electrode and solar cell have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible absorption spectra, contact angle, X-ray photoelectron spectroscopy (XPS), and current-voltage characteristics analyses. X-ray diffraction patterns show that the best sintering temperature of a nano-TiO₂ film is 600 °C, at which TiO₂ anatase phase forms best and the particle size of 8-10 nm can be obtained. The SEM images of a nano-TiO₂ thin film show that the surface of the film is smooth and porous, and the thickness of the nano-TiO₂ film is 4 μm. The measurements of contact angle between nano-TiO₂ film and deionized water (DI water) reveal that the nano-TiO₂ film is super-hydrophilic when solarized under ultraviolet. The electrode of dye-sensitized solar cell is used as a free-base porphyrin with carboxyl group, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) as the sensitizer to adsorb onto the TiO₂ thin film. From the results of ultraviolet-visible absorption spectra and XPS analyses of the electrode, the effects of nano-TiO₂ particles’ addition to the electrode of dye-sensitized solar cell can improve the absorption of visible light (400-700 nm) and increase electrons transferred from TCPP to the conduction band of TiO₂, resulting in the enhancement of efficiency for dye-sensitized solar cells.     

Morphology modification of TiO<Subscript>2</Subscript> nanotubes by controlling the starting material crystallite size for chemical synthesis

TiO₂ nanotubes (NTs) were prepared by low-temperature chemical synthesis using anatase TiO₂ particles with different crystallite sizes in a NaOH solution followed by water washing and HCl neutralization. The synthesized TiO₂ NTs showed diverse morphologies depending on the starting materials. The crystallite size of TiO₂ raw materials increased with an increase in annealing temperature, and larger TiO₂ NTs, around 31 nm in diameter, were obtained from large raw powder with a crystallite size of 117 nm. X-ray diffraction and Raman spectroscopy revealed that the obtained TiO₂ NT exhibited lower crystallinity; however, Raman vibration seems to be more likely than a rutile structure.     

Photogreying of TiO<Subscript>2</Subscript> nanoparticles

Photogreying, the change in brightness on UV irradiation in the absence of oxygen, of TiO₂ nanoparticulate dispersions is shown to depend on the nature of the liquid, consistent with a surface reaction. Measurements on a series of TiO₂ particles (mainly 75×10 nm) dispersed in, e.g., alkyl benzoate correlate well with those on the same TiO₂’s dispersed in a second liquid (e.g. propan-2-ol). Photogreying in propan-2-ol is paralleled by photocatalytic-oxidation activity, indicating a common origin – UV-generation of charge carriers. Further, photogreying parallels Ti³⁺ formation. Hence, although appearance and the visible spectra of photogreyed particles both differ from those of Ti³⁺ in ≤10 nm colloidal TiO₂, we suggest that photogreying is caused by capture of UV excited electrons to form Ti³⁺. Surface treatment reduces photogreying, and we speculate that differences between uncoated samples reflect differences in the number of potentially reducible Ti’s.     

Kinetics of the plasmon optical response of Au nanoparticles/TiO<Subscript>2</Subscript> catalyst under O<Subscript>2</Subscript> and H<Subscript>2</Subscript> followed by differential diffuse reflectance spectroscopy

The changes in the optical properties of Au/TiO₂ powder catalyst, prepared by the deposition-precipitation method, are measured in the visible range by use of a home-made diffuse differential reflectance spectrometer, when the ambient atmosphere is switched between H₂ and O₂. Two main features are observed: (i) a short wavelength one, located between 400 and 600 nm, is shown to be related to the modifications of the plasmon resonance of the 3-dimensional metallic gold particles with mean size around 4 nm, induced by the exposure to oxygen or by its removal; (ii) a second feature, observed at long wavelengths between 600 and 1100 nm, is extremely sensitive to the exposure to oxygen. This optical feature could be due to the presence in the catalyst, either of Au⁰ clusters of several tens atoms, which are expected to display molecular-like transitions in this optical range, or to specific sites of the Au particles (edge atoms or peripheral atoms at the interface with the TiO₂ support), which could be highly reactive to oxygen.     

Multiple nano-TiO2 layers to prevent dye/nano-TiO2 from photodegradation under a UV-exposure environment

A device of multiple nano-TiO₂ layers was proposed and fabricated to prevent a dye/nano-TiO₂ region from serious photo-degradation. In this device, the top of the dye/TiO₂ region was designed to be coated using sol-gel nano-TiO₂ thin films to shield UV irradiation from the photo-degradation effect. The sol-gel TiO₂ was prepared in a low temperature (75 °C) and verified as nano-sized particles and an anatase crystalline structure. Different devices of the multi-layer samples fabricated using different compositions of nano-TiO₂ were produced and exposed for UV irradiation tests. Results show that the presence of the sol-gel TiO₂ films coated on top of the dye/TiO₂ region can significantly alleviate the dye photo-degradation under UV irradiation. This multi-layer device can effectively improve the photo-stability of the dye/TiO₂ region in a UV-exposure environment.     

Toxicological consequences of TiO<Subscript>2</Subscript>, SiC nanoparticles and multi-walled carbon nanotubes exposure in several mammalian cell types: an in vitro study

The development of nanotechnologies may lead to dissemination of potentially toxic nanoparticles in the environment. Toxicology of these nano-sized particles is thus attracting attention of public and governments worldwide. Our research is focused on the in vitro response of eukaryotic cells to nanoparticles exposure. For this purpose, we used cellular models of primary target organs (lung: A549 alveolar epithelial cells), or secondary target organs (liver: WIF-B9, Can-10 and kidneys: NRK-52E, LLC-PK1 proximal cells), i.e., organs exposed if nanoparticles are translocated through epithelial barriers. These cells were exposed to TiO₂, SiC nanoparticles or multi-walled carbon nanotubes (MWCNT). The influence of nanoparticles physico-chemical characteristics on various toxicological endpoints (cytotoxicity, reactive oxygen species generation, genotoxicity) was specified. Our data demonstrate that nanoparticles toxicity depend on their size, morphology, and chemical composition, the finest, spherical shaped, and anatase TiO₂ nanoparticles being the more cytotoxic to NRK-52E cells, while SiC nanoparticles exert almost no cytotoxicity. MWCNT cytotoxicity neither depended on their length, nor on the presence of metal impurities. Nanoparticles cytotoxicity also depended on the exposed cell line. All the tested nanoparticles were uptaken by cells and caused intracellular reactive oxygen species generation. Relative to genotoxic effects, DNA strand breaks were detected in NRK-52E cells via the alkaline comet assay after exposure of cells to TiO₂ nanoparticles and to a lesser extent after exposure to MWCNT, but no double strand breaks were detected. The originality of this study lies on the panel of nanomaterials which were tested on a variety of cell lines. All these data may lead to a better understanding of nanomaterial toxicity and hazards for health.     

Anatase TiO<Subscript>2</Subscript> nanoparticles for lithium-ion batteries

Anatase TiO₂ nanoparticles were prepared by a simple sol-gel method at moderate temperature. X-ray powder diffraction (XRD) and Raman spectroscopy revealed the exclusive presence of anatase TiO₂ without impurities such as rutile or brookite TiO₂. Thermogravimetric analysis confirmed the formation of TiO₂ at about 400 °C. Particle size of about 20 nm observed by transmission electron microscopy matches well with the dimension of crystallites calculated from XRD. The electrochemical tests of the sol-gel-prepared anatase TiO₂ show promising results as electrode for lithium-ion batteries with a stable specific capacity of 174 mAh g^?1 after 30 cycles at C/10 rate. The results show that improvement of the electrochemical properties of TiO₂ to reach the performance required for use as an electrode for lithium-ion batteries requires not only nanosized porous particles but also a morphology that prevents the self-aggregation of the particles during cycling.     

Influence of the oxygen concentration on the formation of crystalline phases of TiO<Subscript>2</Subscript> during the low-pressure arc-discharge plasma synthesis

The synthesis of titanium dioxide (TiO₂) nanoparticles with different percentage of anatase and rutile phases is investigated. The synthesis is performed by controlling the oxygen percentage in the gas mixture in the plasmachemical evaporation–condensation process employing a low-pressure arc discharge. In all our experiments, the pressure in the plasmachemical reactor and the average size of particles remain constant and are 60 Pa and 6 nm, respectively. The crystal structure of synthesized TiO₂ is studied using X-ray diffraction; the morphology of the particles is analyzed employing transmission electron microscopy. Using X-ray phase analysis, it is established that the concentration of the TiO₂ anatase phase decreases upon a decrease in the oxygen concentration in the gas mixture. It is shown that the TiO₂ anatase phase is more efficient for photocatalytic decomposition of methylene blue than the rutile phase.     

Thermostable photocatalytically active TiO<Subscript>2</Subscript> anatase nanoparticles

Anatase is the low-temperature (300–550 °C) crystalline polymorph of TiO₂ and it transforms to rutile upon heating. For applications utilizing the photocatalytic properties of nanoscale anatase at elevated temperatures (over 600 °C) the issue of phase stabilisation is of major interest. In this study, binary TiO₂/SiO₂ particles were synthesized by a flame aerosol process with TiCl₄ and SiCl₄ as precursors. The theoretical Si/Ti ratio was varied in the range of 0.7–1.3 mol/mol. The synthesized TiO₂/SiO₂ samples were heat treated at 900 and 1,000 °C for 3 h to determine the thermostability of anatase. Pyrogenic TiO₂ P25 (from Evonik/Degussa, Germany) widely applied as photocatalyst was used as non-thermostabilized reference material for comparison of photocatalytic activity of powders. Both the non-calcinated and calcinated powders were characterized by means of XRD, TEM and BET. Photocatalytic activity was examined with dichloroacetic acid (DCA) chosen as a model compound. It was found that SiO₂ stabilized the material retarding the collapse of catalyst surface area during calcination. The weighted anatase content of 85% remains completely unchanged even after calcination at 1,000 °C. The presence of SiO₂ layer/bridge as spacer between TiO₂ particles freezes the grain growth: the average crystallite size increased negligibly from 17 to 18 nm even during the calcination at 1,000 °C. Due to the stabilizing effect of SiO₂ the titania nanoparticles calcinated at 900 and 1,000 °C show significant photocatalytic activity. Furthermore, the increase in photocatalytic activity with calcination temperature indicates that the titania surface becomes more accessible either due to intensified cracking of the SiO₂ layer or due to enhanced transport of SiO₂ into the necks thus releasing additional titania surface.     

Computational study on the structural and surface properties of amorphous hydroxylated TiO<Subscript>2</Subscript> spherical nanoparticles

Monte Carlo simulations were carried out on amorphous titanium dioxide (TiO₂) for both bulk and hydroxylated nanoparticles with particle sizes ranging from 1 to 10 nm. The potential developed by the Matsui and Akaogi (MA) was used to model the interatomic interactions of TiO₂ in both cases (bulk and nanoparticles). Besides, Angular and Morse potentials proposed by the Tether, Cormack, Du et. al. (TCD) were introduced to model the interactions of hydroxyl groups on the TiO₂ surfaces, i.e., the Ti-O-H groups with an experimental and theoretical angles of 125 ^o . The bulk system was developed using periodic boundary conditions. The TiO₂ nanoparticles were extracted by applying a spherical cut section in the bulk TiO₂ melt structure to obtain the required size. Free valences on the nanoparticle surfaces were saturated via additional hydroxyl groups and then quenched to 300 K under free boundary conditions. The bulk and surface properties of the nanoparticles were calculated at 300 K and zero pressure and characterized via radial distribution functions, bond angle distributions, bond distances, coordination numbers, OH group concentrations and radial density profiles. In addition, to understand the difference in properties of amorphous hydroxylated TiO₂ nanoparticles and bulk amorphous TiO₂, a comparative study was done at the same thermodynamic conditions. The study shows that the bulk properties of amorphous hydroxylated TiO₂ nanoparticles are strongly size-dependent and different from those of the bulk TiO₂. As expected, increasing the particle size leads to an approach of the particle’s bulk properties to the bulk properties of the (quasi) infinite system. The size effects show that decreasing the particle size results in increasing the surface effects and surface OH group concentrations. Accordingly, small-sized TiO₂ nanoparticles have higher surface OH group concentrations and larger surface effects than large-sized TiO₂ nanoparticles. Larger surface effects result significant changes in their bond angles, bond distances, and coordination numbers. The simulation results of the surface properties reveal that the surface titanium atoms in the TiO2 nanoparticles have the capability of accommodating up to 5 hydroxyl groups. The mean surface hydroxyl group density of the amorphous TiO₂ spherical nanoparticles is estimated to be around 8.1/nm ², which lies in the range of 8–16/nm ², found by experimental and other simulation studies. Details of the modelling, simulations results and the study are presented in this paper.     

Evaluation of nanoparticle emission for TiO<Subscript>2</Subscript> nanopowder coating materials

In this study, nanoparticle emission of TiO₂ nanopowder coated on different substrates including wood, polymer, and tile, was evaluated in a simulation box and measured with a Scanning Mobility Particle Sizer (SMPS) for the first time. The coating process for the substrate followed the instructions given by the supply company. In the simulation box, UV light, a fan, and a rubber knife were used to simulate the sun light, wind, and human contacting conditions. Among the three selected substrates, tile coated with TiO₂ nanopowder was found to have the highest particle emission (22 #/cm³ at 55 nm) due to nanopowder separation during the simulation process. The UV light was shown to increase the release of particle below 200 nm from TiO₂ nanopowder coating materials. The results show that, under the conditions of UV lamps, a fan and scraping motion, particle number concentration or average emission rate decreases significantly after 60 and 90 min for TiO₂/polymer and TiO₂/wood, respectively. However, the emission rate continued to increase after 2 h of testing for TiO₂/tile. It is suggested that nanoparticle emission evaluation is necessary for products with nanopowder coating.     

The effects of nano-TiO<Subscript>2</Subscript> on seed germination,development and mitosis of root tip cells of <Emphasis Type="Italic">Vicia narbonensis</Emphasis> L. and <Emphasis Type="Italic">Zea mays</Emphasis> L

This study aimed to provide new information about phyto-toxicology of nano-TiO₂ on plant systems. To contribute to the evaluation of the potential harmful effects of the nanoparticles on monocots and dicots we considered their effects on seed germination and root elongation applying a concentration range from 0.2 to 4.0‰ in the plants Zea mays L. and Vicia narbonensis L. Moreover, we achieved a genotoxicity study at cytological level in root meristems by means of traditional cytogenetic approach, to evidence possible alterations in mitotic activity, chromosomal aberrations, and micronuclei release. From these analyses it comes out that nano-TiO₂ particles, after short-term exposure and under our experimental conditions, delayed germination progression for the first 24 h in both materials. Root elongation was affected only after treatment with the higher nano-TiO₂ concentration. Further significant effects were detected showing mitotic index reduction and concentration-dependent increase in the aberration emergence that evidenced a nano-TiO₂-induced genotoxic effect for both species.     

Synthesis and nanostructural investigation of TiO<Subscript>2</Subscript> nanorods doped by SiO<Subscript>2</Subscript>

TiO₂ Nano rods can be used as dye-sensitized solar cells, various sensors and photocatalysts. These nanorods are synthesized by a hydrothermal corrosion process in NaOH solution at 200°C using TiO₂ powder as the source material. In the present work, the synthesis of TiO₂ nanorods in anatase, rutile and Ti₇O₁₃ phases and synthesis of TiO₂ nanorods by incorporating SiO₂ dopant, using the sol–gel method and alkaline corrosion are reported. The morphologies and crystal structures of the TiO₂ nanorods are characterized using field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) study. The obtained results show not only an aggregation structure at high calcination temperatures with spherical particles but also Ti–O–Si bonds having four-fold coordination with oxygen in SiO^4 −.     

Nanocrystalline Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> electrodes for supercapattery application

Nanocrystalline Li₂TiO₃ was successfully synthesized using solid-state reaction method. The microstructural and electrochemical properties of the prepared material are systematically characterized. The X-ray diffraction pattern of the prepared material exhibits predominant (002) orientation related to the monoclinic structure with C2/c space group. HRTEM images and SAED analysis reveal the well-developed nanostructured particles with average size of ～40 nm. The electrochemical properties of the prepared sample are carried out using cyclic voltammetry (CV) and chronopotentiometry (CP) using Pt//Li₂TiO₃ cell in 1 mol L^?1 Li₂SO₄ aqueous electrolyte. The Li₂TiO₃ electrode exhibits a specific discharge capacity of 122 mAh g^?1; it can be used as anode in Li battery within the potential window 0.0–1.0 V, while investigated as a supercapacitor electrode, it delivers a specific capacitance of 317 F g^?1 at a current density of 1 mA g^?1 within the potential range ?0.4 to +0.4 V. The demonstration of both anodic and supercapacitor behavior concludes that the nanocrystalline Li₂TiO₃ is a suitable electrode material for supercapattery application.     

Study on the lattice distortion of the As-prepared nanosized TiO2 particles via detonation method

Quantitative XRD measurements of the nanosized TiO₂ particles obtained from the detonation soot have been carried out. The lattice parameters, such as grain size, cell volume, lattice constants and lattice strain were obtained. The relationships between the change ratio of cell volume (the reciprocal of the particles size, or the mass ratio of explosive and TiO₂ precursor) and the lattice strain of the different TiO₂ phases were also discussed. The relationship between the change ratio of cell volume and the particle size of TiO₂ particles was also studied. The results demonstrated that with the decreasing of the particles size, the lattice strain of anatase phase increased, while the lattice strain of rutile phase increased firstly and then decreased to some extent. It is different from the linear relationship between the lattice distortion and the reciprocal of the particles size reported in other literatures. In the meantime, the lattice strains were different with the different mass contents of RDX in the microstructures of the TiO₂ particles. The direct reflection of microstructure changes is the changes of the particle size of TiO₂ particles. Based on the XRD results, the particular characteristics of the detonation process and interfacial effects of nanocrystalline materials, a crude explanation was also given.     

Experimental evaluation of individual protection devices against different types of nanoaerosols: graphite,TiO<Subscript>2,</Subscript> and Pt

In this study different conventional individual protection devices, well-qualified for submicron particles were tested for different types of polydispersed nanoaerosols of TiO₂, Pt, and graphite. The electrical mobility diameters of the generated particles are ranging from 9 to 19 nm for Pt, 9 to 90 nm for TiO₂, and 15 to 90 nm for graphite. Toward this purpose, two specific test benches were used: one for the filter-based devices which are tested under a controlled air flow, and the other one for protective clothing and gloves under diffusion and without air flow. Different types of nanoaerosols, such as TiO₂, Pt, and graphite, were generated. Electrostatic and HEPA (High Efficiency Particle Air) filters have shown the highest efficiency for graphite nanoparticles. The main hypothesis for explaining this effect is that electrostatic forces could enhance the graphite nanoparticles capture. Air-tight fabrics made of non-woven textile seem much more efficient in protecting workers against Pt, and TiO₂ nanoparticles than cotton and polypropylene. With regard to protective clothing, no obvious effect linked to the aerosol type was observed. Gloves are found very efficient for TiO₂ and Pt nanoaerosols. Therefore, no effect of aerosol on the protection efficiency of gloves was evidenced.     

Photoactivity passivation of TiO<Subscript>2</Subscript> nanoparticles using molecular layer deposited (MLD) polymer films

Pigment-grade anatase TiO₂ particles (160 nm) were passivated using ultra-thin insulating films deposited by molecular layer deposition (MLD). Trimethylaluminum (TMA) and ethylene glycol (E.G) were used as aluminum alkoxide (alucone) precursors in the temperature range of 100–160 °C. The growth rate varied from 0.5 nm/cycle at 100 °C to 0.35 nm/cycle at 160 °C. Methylene blue oxidation tests indicated that the photoactivity of pigment-grade TiO₂ particles was quenched after 20 cycles of alucone MLD film, which was comparable to 70 cycles of Al₂O₃ film deposited by atomic layer deposition (ALD). Alucone films would decompose in the presence of water at room temperature and would form a more stable composite containing aluminum, which decreased the passivation effect on the photoactivity of TiO₂ particles.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.