Coordination behaviour of Schiff base 2-acetyl-2-thiazoline hydrazone (ATH) towards cobalt(II), nickel(II) and copper(II)

The synthesis and characterization of Co(II), Ni(II) and Cu(II) complexes of 2-acetyl-2-thiazoline hydrazone (ATH) are reported. Elemental analysis, IR spectroscopy, UV–Vis–NIR diffuse reflectance and magnetic susceptibility measurement, as well as, in the case of copper complex EPR spectroscopy, have been used to characterize the complexes. In addition, the structure of [NiCl₂(ATH)₂] (2) and [{CuCl(ATH)}₂(μ-Cl)₂] (3) have been determined by single crystal X-ray diffraction. In all complexes, the ligand ATH bonds to the metal ion through the imine and thiazoline nitrogen atoms. X-ray data indicates that the environment around the nickel atom in 2 may be described as a distorted octahedral geometry with the metallic atom coordinated to two chlorine atoms, two thiazoline nitrogen atoms and two imino nitrogen atoms. With regard to 3, it can be said that its structure consists of dimeric molecules in which copper ions are bridge by two chlorine ligands. The geometry about each copper ion approximates to a distorted square pyramid with each copper atom coordinated to one thiazoline nitrogen atom, one imine nitrogen atom, one terminal chlorine ligand and two bridge chlorine ligands. In compound 3, magnetic susceptibility measurements in the temperature range 2–300 K show an intradimer antiferromagnetic interaction (J = −7.5 cm⁻¹).     

The synthesis of R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl)benzenes utilizing Corey-Bakshi-Shibata asymmetric reductions

Pyrolysis of the 3-O-allyl derivative 7 of isovanillin followed by alkylation of the derived allylphenol 8 afforded a series of benzaldehyde derivatives 9-11 each of which was transformed by initial treatment with methylmagnesium bromide followed by oxidation of the corresponding alcohols with activated manganese dioxide into a series of ketones 15-17. Palladium(0) catalysed isomerization of the double bond in the prop-2′-enyl side-chain afforded ketones 36-38 which were subjected to the Corey-Bakshi-Shibata asymmetric reduction protocol to afford the R-3-alkoxy-1-(1′-hydroxyethyl)-4-methoxy-2-(1″-propenyl) benzenes 42-44 in yields of approximately 60% and with ee's of 75%.     

Structural characterization of a copper(II) complex containing oxidative cyclization of N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea,new ligands of 4-picolylthiourea derivatives and the precursor molecular structure of oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea

Three new compounds of aryl thiourea derivatives, namely N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea (L1), N-2-(6-picolyl)-N′-(4-methoxyphenyl)thiourea (L2) and N-2-(4-picolyl)-N′-(4-nitrophenyl)thiourea (L3), and the new copper(II) complex [Cu(4PicTz4OMePh)(OAC)(EtOH)] (C1), as a result of oxidative cyclization of the ligand (L1), were synthesized. In addition, pure precursor (P1), as the product of the oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea (L4), was isolated and characterized. Ligands (L1) and (L2) were characterized by ¹H and ¹³C NMR and single crystal X-ray analysis. ¹H NMR spectroscopy showed strong hydrogen bonding interactions between N′H-functionalities and the pyridine nitrogen atoms as well as weak intermolecular hydrogen bonding between the thione sulfur and the NH hydrogen. Structural studies of complex (C1) showed that the copper ion is five-coordinated with a square-pyramidal environment. The oxidative cyclization of ligand (L1) results in an anionic bidentate ligand in complex (C1). Both ligand (L1) and precursor (P1) crystallize as centrosymmetric dimers.     

Synthesis, characterization, and catalytic application of a new chiral P,N-indene ligand derived from (R)-BINOL

Lithiation of 2-dimethylaminoindene followed by quenching with [(R)-(1,1′-binaphthalene-2,2′-diyl)]chlorophosphite and treatment with triethylamine afforded the crystallographically characterized enantiopure P,N-indene 3 in 71% isolated yield. In the course of rhodium coordination chemistry studies involving 3, the formation of the isolable complex [(κ²-P,N-3)(κ¹-P,N-3)RhCl] (7) (81%) was observed, thereby confirming the propensity of this new ligand to form L_nRh(3)₂ complexes. Such coordination chemistry behavior may contribute in part to the generally poor catalytic performance exhibited by mixtures of 3 and rhodium precursor complexes in the asymmetric hydrogenation and hydrosilylation studies described herein.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

The diastereoisomeric forms of a mononuclear Ru(II) complex bearing a bis-phenanthroline Tröger’s base

The synthesis of a novel completely asymmetric mononuclear complex of ruthenium(II) bearing a chiral bis-phenanthroline Tröger’s base ligand 1 (TBphen₂) is reported. The diastereoisomeric forms of [Ru(phen)₂TBphen₂]²⁺ (ΔS/ΛR=rac-2a and ΛS/ΔR=rac-2b) were separated through crystallization. A complete structure elucidation of the diastereoisomers in solution, including chirality assignment, was achieved by 1D and 2D NMR techniques. Photophysical characterization revealed no significant differences in the emission properties of rac-2a and rac-2b that closely resemble those of [Ru(phen)₃]²⁺.     

Endo and exo cyclometallated iron carbonyl complexes derived from N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine

The reaction of N-(N′-methyl-2-pyrrolylmethylidene)-2-thienylmethylamine (1) with Fe₂(CO)₉ in refluxing toluene gives endo cyclometallated iron carbonyl complexes 2 and 5, exo cyclometallated iron carbonyl complex 3, and unexpected iron carbonyl complex 4. Complexes 2, 3, and 5 are geometric isomers. Complex 5 differs from complex 2 in the switch of the original substituent from α to β position of the pyrrolyl ring, and the pyrrolyl ring bridges to the diiron centers in μ-(3,2-η¹:η²) coordination mode in stead of μ-(2,3-η¹:η²). In complex 4, the pyrrolyl moiety of the original ligand 1 has been displaced by a thienyl group, which comes from the same ligand. Single crystals of 2, 3, and 5 were subjected to the X-ray diffraction analysis. The major product 2 undergoes: (i) thermolysis to recover the original ligand 1; (ii) reduction to form a hydrogenation product, 6, of the original ligand; (iii) substitution to form a monophosphine-substituted complex 7; (iv) chemical as well as electrochemical oxidation to produce a carbonylation product, γ-butyrolactam 8.     

Formal total synthesis of (−)-spongidepsin

The formal total synthesis of (−)-spongidepsin is described. Three fragments I, II, and III were first prepared from readily available starting materials and then assembled to the target compound. The key steps involved in the synthesis are asymmetric α-hydroxylation, Ender's alkylation, and ring-closing metathesis reactions. An alternative route for the fragment II is also achieved involving Sharpless asymmetric epoxidation and Gilman's alkylation as key reactions.     

Osmium assisted C-H activation and CN cleavage of N-(2′-hydroxyphenyl) benzaldimines. Synthesis, structure and electrochemical properties of some organoosmium complexes

Reaction of N-(2′-hydroxyphenyl)-4-R-benzaldimines (L-R, R = OCH₃, CH₃, H, Cl and NO₂) with [Os(PPh₃)₃Br₂] in refluxing 2-methoxyethanol in the presence of triethylamine affords two families of organoosmium complexes (1-R and 2-R). In both 1-R and 2-R complexes a benzaldimine ligand is coordinated to the metal center as tridentate C,N,O-donor. In the 1-R complexes, a bidentate N,O-donor imionsemiquinonate ligand, derived from the hydrolysis of another benzaldimine, and a PPh₃ ligand are also coordinated to osmium. In the 2-R complexes, a carbonyl, derived from decarbonylation of 4-R-benzaldehyde (derived from the same hydrolysis stated above), and two PPh₃ ligands take up the remaining coordination sites on osmium. Structures of the 1-Cl and 2-OCH₃ complexes have been determined by X-ray crystallography. All the 1-R and 2-R complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the 1-R complexes shows a reversible Os(III)-Os(IV) oxidation within 0.47-0.67 V (vs SCE), followed by an irreversible oxidation of the imionsemiquinonate ligand within 1.10-1.36 V. An irreversible Os(III)-Os(II) reduction is also displayed by the 1-R complexes within −1.02 to −1.14 V. Cyclic voltammetry on the 2-R complexes shows a reversible Os(II)-Os(III) oxidation within 0.29-0.51 V, followed by a quasi-reversible oxidation within 1.04-1.29 V, and an irreversible reduction of the coordinated benzaldimine ligand within −1.16 to −1.31 V.     

Cyclopalladated complexes with N-(benzoyl)-N-(2,4-dimethoxybenzylidene)hydrazine: syntheses, characterization and structural studies

Cyclopalladated complexes with the Schiff base N-(benzoyl)-N^′-(2,4-dimethoxybenzylidene)hydrazine (H₂L, 1) have been described. The reaction of 1 with Li₂[PdCl₄] in methanol yields the complex [Pd(HL)Cl] (2). [Pd(HL)(CH₃CN)Cl] (3) has been prepared by dissolving 2 in acetonitrile. In methanol-acetonitrile mixture, treatment of 2 with two mole equivalents of PPh₃ produces [PdL(PPh₃)] (4) and that with one mole equivalent of PPh₃ produces [Pd(HL)(PPh₃)Cl] (5). Crystallization of 2 from dmso-d₆ results into isolation of [Pd(HL)((CD₃)₂SO)Cl] (6). In 2, the monoanionic ligand (HL⁻) is C,N,O-donor and the Cl-atom is trans to the azomethine N-atom. In 3, 5 and 6, HL⁻ is C,N-donor and the Cl-atom is trans to the metallated C-atom. The remaining fourth coordination site is occupied by the N-atom of CH₃CN, the P-atom of PPh₃ and the S-atom of (CD₃)₂SO in 3, 5 and 6, respectively. Thus on dissolution in acetonitrile and dmso and in reaction with stoichiometric PPh₃ the incoming ligand imposes a rearrangement of the coordinating atoms on the palladium centre. On the other hand, in presence of excess PPh₃ deprotonation of the amide functionality in 2 occurs and the Cl-atom is replaced by the P-atom of PPh₃ to form 4. Here the dianionic ligand (L²⁻) remains C,N,O-donor as in 2. The compounds have been characterized with the help of elemental analysis (C, H, N), infrared, ¹H NMR and electronic absorption spectroscopy. Molecular structures of 3, 4, and 6 have been determined by X-ray crystallography.     

Non-C2-symmetrical antimony-phosphorus ligand, (R/S)-2-diphenylphosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb): preparation and its use for asymmetric reactions as a chiral auxiliary

A new non-C₂-symmetrical antimony-phosphorous ligand, (±)-2-diphenyl-phosphano-2′-di(p-tolyl)stibano-1,1′-binaphthyl (BINAPSb) 3, has been prepared from 2-bromo-2′-diphenylphosphano-1,1′-naphthyl 4 via its borane complex 6, and could be resolved by the separation of a mixture of the diastereomeric palladium complexes 8A and 8B derived from the reaction of (±)-3 with optically active palladium reagent (S)-7. The enantiomerically pure BINAPSb 3 has proved to be highly effective in the palladium-catalyzed asymmetric hydrosilylation of styrene as a chiral auxiliary.     

Hydrothermal synthesis, crystal structures and fluorescence properties of three novel frameworks constructed with mixed ligands of isophthalic acid (1,3-BDC) and 2,3-di-2-pyridylquinoxaline (Dpdq): [M(1,3-BDC)(Dpdq)(H2O)m] · nH2O (M = Co, Cd or Zn)

Three novel metal-organic frameworks [M(1,3-BDC)(Dpdq)(H₂O)_m] · nH₂O, (M = Co^II (1), Cd^II (2) or Zn^II (3); m = 0, 1; n = 0, 1, 2, respectively) have been obtained from hydrothermal reactions of three different metal(II) nitrates with the same mixed ligands [isophthalic acid (1,3-BDC) and 2,3-di-2-pyridylquinoxaline (Dpdq)], and structurally characterized by elemental analyses, IR spectroscopy, and single-crystal X-ray diffraction analyses. Single-crystal X-ray analyses show that each pair of metal ions are bridged by various coordination modes of 1,3-BDC ligands to form left- and right-handed helical chains in 1, linear chains in 2, and double chains in 3, respectively. N-containing flexible ligand Dpdq takes a chelating coordination mode acting as terminal ligand. In the compound 1, adjacent left- and right-handed helical chains are packed through hydrogen bonds to form a two-dimensional (2-D) structure. In the compounds 2 and 3, adjacent chains are further linked by hydrogen bonds and/or π-π stacking interactions to form a three-dimensional (3-D) distorted hexagon meshes supramolecular framework for 2 and a ZnS-related three-dimensional (3-D) topology for 3, respectively. The different structures of compounds 1-3 illustrate that the influence of the metal ions in the self-assembly of polymeric coordination architectures. In addition, compounds 2 and 3 exhibit blue emission in the solid state at room temperature.     

Facile total synthesis of the (−)-Heliconol A

The facile total synthesis of the (−)-Heliconol A (ent-1) as well as its diastereoisomer 18 is described, in which different reaction sequences lead to different results. The osmylation of 15 followed by hydrolysis afforded a single isomer 18, otherwise, a mixture of ent-1 and 18 resulted. Other important processes include the catalytic asymmetric CBS reduction and induced osmylation. The synthesis proceeded with a sequence of 11 steps, affording ent-1 in 9.0% and 18 in 22% overall yield, respectively.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Quinoxalines. Part 12: Synthesis and structural study of 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines—the dehydrogenative cyclization with hydroxylamine hydrochloride

Starting with 2-acetylquinoxaline a novel class of heterocyclic compounds, the 1-(thiazol-2-yl)-1H-pyrazolo[3,4-b]quinoxalines 4, were prepared by following two different synthetic procedures: 2-acetylquinoxaline reacted with thiosemicarbazide to the thiosemicarbazones 1a which was (i) cyclized with α-halogeno ketones to the thiazoles 3. These compounds were dehydrogenated in acidic medium to the title compounds 4. (ii) The thiosemicarbazone 1a could be also dehydrogenated using NH₂OH·HCl to the thioamide 5a and these, finally, were cyclized with α-halogeno ketones to the title compounds 4. Only thiazole 3a was isolated, the other thiazoles 3 were dehydrogenated in a one-pot procedure. From the thioamide 5a also both the compounds 9, by reacting with dibromodiacetyl, and 10, by treatment with dimethyl acetylenedicarboxylate, were obtained. The analysis of both the ¹H and ¹³C NMR spectra was not straightforward but could be attained finally by employing the whole arsenal of 1D and 2D NMR spectroscopy.     

Rapid syntheses of (±)-pterocarpans and isoflavones via the gold-catalyzed annulation of aldehydes and alkynes

(±)-Pterocarpan and analogues (4a-c) have been synthesized efficiently via the annulation of salicylaldehydes (1a, 1b and 1c) and o-methoxymethoxylphenylacetylene (2a), followed by a one-pot reduction and acidic cyclization of the ketones (3a-c). In addition, isoflavone derivatives (5a-c) have been synthesized rapidly, in two steps, via the annulation of salicylaldehyde (1a) and arylacetylenes (2b, 2c and 2d), followed by IBX/DMSO oxidation of the isoflavanones (3d, 3e and 3f).     

C11H12 Hydrocarbons—II : Preparation of tricyclo[5.4.0.0]undeca-3,8,10-triene a norbornenone route from cycloheptatriene

A stereoselective 6-step synthesis of the C₁₁H₁₂ hydrocarbon cis,anti,cis-tricyclo[5.4.0.0^2,5]undeca-3,8,10-triene (2a) is described. The dichloro compound 3c was prepared by the selective reduction of 3a with chromous perchlorate-ethylenediamine complex, a general reagent for this type of transformation. Irradiation of 3c produced 6a and 7a in ∼ 7:1 ratio. Reduction of the mixture with sodium produced ketal mixture 6b and 7b. The ketals were hydrolyzed to ketones 6c and 7c and the ketones decarbonylated to 2a and an isomeric hydrocarbon tentatively assigned as homobasketene 2b′. Hydrocarbon 2a was readily obtained pure by a silver nitrate extraction procedure and 2b′ by preparative VPC. It was shown that pure 6c gives only 2a and therefore, 7c is the source of 2b′. The stereochemical assignments, based on both spectral and chemical evidence, are discussed.     

Ligand substitution in HC(O)CCo3(CO)9 with 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd): Diphosphine ligand fluxionality, decarbonylation of the formyl moiety and competitive P-Ph bond cleavage reactivity

The reaction of the formyl-capped cluster HC(O)CCo₃(CO)₉ (1) with the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) in the presence of added Me₃NO leads to the production of the disubstituted cluster HC(O)CCo₃(CO)₇(bpcd) (2). Thermolysis of 2 in toluene at 60 °C gives the methylidyne-capped cluster HCCo₃(CO)₇(bpcd) (4) and the phosphido-bridged cluster Co₃(CO)₇[μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O)] (5). Cluster 4 has been independently prepared from HCCo₃(CO)₉ and bpcd and shown to serve as the precursor to 5. The new clusters 2, 4, and 5 have been isolated and characterized in solution by IR and NMR (¹H and ³¹P) spectroscopies and their solid-state structures have been established by X-ray diffraction analyses. Both clusters 2 and 4 contain 48e- and exhibit triangular Co₃ cores with a chelating and bridging bpcd ligand in the solid state, respectively. The structure of 5 provides unequivocal support for the loss of the methylidyne capping ligand and P-Ph bond cleavage attendant in the activation of 4 and confirms the presence of the face capping seven-electron μ₂,η²,η¹-P(Ph)CC(PPh₂)C(O)CH₂C(O) ligand in the final product. The fluxionality displayed by the bpcd ligand in clusters 2 and 4 and the decarbonylation behavior of the formyl moiety in the former cluster are discussed relative to related alkylidyne-capped Co₃ derivatives.     

Syntheses, crystal structures and properties of Co(II) complexes with N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine (bpb), and Cd(II), Hg(II) complexes with reduced bpb

Five novel coordination polymers, [Co(bpb)₂Cl₂] (1), [Co(bpb)₂(SCN)₂] (2), [Cd(H₄bpb)_0.5(dmf)(NO₃)₂] (3), [Cd₂(H₄bpb)Br₄] (4), and [Hg₂(H₄bpb)I₄] (5) [bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine, H₄bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethylamine], were synthesized and their structures were determined by X-ray crystallography. In the solid state, complex 1 is a 1D hinged chain, while 2 has 2D network structure with the ligand bpb serving as a bridging ligand using its two pyridyl N atoms. The imine N atoms keep free of coordination and bpb acts as a bidentate ligand in both 1 and 2. Complexes 3, 4, and 5 with reduced bpb ligand, i.e. H₄bpb, show similar 2D network structure, in which ligand H₄bpb serves as a tetradentate ligand. Thermogravimetric analyses for complexes 1-5 were carried out and found that they have high thermal stability. The magnetic susceptibilities of compounds 1, 2 were measured over a temperature range of 75-300 K.