The surfactant sensitized analytical reaction of cerium(IV) with some triphenylformazan derivatives

Cationic surfactant, cetylpyridinium bromide (CPB), sensitizes the colour reaction of cerium(IV) with 1,3-o-hydroxyphenyl-5-phenylformazan(I), 1-m-hydroxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(II) and 1-m-carboxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(III). The formation of a soluble ternary complex of stoichiometric ratio 1:1:1 (Ce(IV)-R-CPB) is responsible for the observed enhancement in the molar absorptivity and Sandell sensitivity of the formed complex, when a surfactant is present. The ternary complex exhibits absorption maxima at 596, 571 and 607 nm (epsilon=6.05 x 10(4), 6.28 x 10(4) and 8.06 x 10(4)L mol(-1)cm(-1)) using triphenylformazan derivatives I, II and III, respectively. Beer's law is obeyed between 0.15 and 2.5 microg ml(-1), whereas, optimum concentration range applying Ringbom method is in the range 0.30-2.25 microg ml(-1). Conditional formation constants in the presence and absence of CPB for Ce(IV) complexes have been calculated. The proposed method has been successfully applied to the analysis of magnesium-base cerium alloys and synthetic mixtures corresponding to various cerium alloys.     

表面活性剂对金属荧光反应的增敏作用

研究了各种类型的表面活性剂对铪-栎精、锆-栎精、锡-桑色素、镁-8-羟基喹啉-5-磺酸(镁-H_QS)、锌-H_2QS、镉-H_2QS、铽-EDTA-磺基水杨酸体系荧光光谱的影响.结果表明:在适当的表面活性剂存在下,各种配合物的荧光强度均大大增强.确定了在有表面活性剂参与下三元配合物的最佳形成条件;以荧光法测定了这些荧光配合物的组成.用相对法测定了有表面活性剂和没有表面活性剂存在时荧光配合物的量子效率,并计算了在激发波长下各自的摩尔吸光系数.发现在有表面活性剂存在时,由于生成了有固定组成的三元离子缔合物,荧光配合物的量子效率和摩尔吸光系数都有不同程度的提高,从而大大增强了它们的荧光强度.讨论了表面活性剂胶束的作用以及表面活性剂的分子结构对荧光反应的影响.指出只有那些分子中带电荷基团与共轭大π键不相邻的表面活性剂才能对荧光反应起增敏作用.利用表面活性剂的增敏作用有可能建立一些高灵敏度的金属荧光分析法.     

Modification of Wyoming montmorillonite surfaces using a cationic surfactant

Surfaces of Wyoming SWy-2-Na-montmorillonite were modified using ultrasonic and hydrothermal methods through the intercalation and adsorption of the cationic surfactant octadecyltrimethylammonium bromide (ODTMA). Changes in the surfaces and structure were characterized using X-ray diffraction (XRD), thermal analysis (TG), and electron microscopy. The ultrasonic preparation method results in a higher surfactant concentration within the montmorillonite interlayer when compared with that from the hydrothermal method. Three different molecular environments for surfactants within the surface-modified montmorillonite are proposed upon the basis of their different decomposition temperatures. Both XRD patterns and TEM images demonstrate that SWy-2-Na-montmorillonite contains superlayers. TEM images of organoclays prepared at high surfactant concentrations show alternate basal spacings between neighboring layers. SEM images show that modification with surfactant reduces the clay particle size and aggregation. Organoclays prepared at low surfactant concentration display curved flakes, whereas they become flat with increasing intercalated surfactant. Novel surfactant-modified montmorillonite results in the formation of new nanophases with the potential for the removal of organic impurities from aqueous media.     

Aggregation behavior of naphthalimide fluorescent surfactants in aqueous solution

A group of novel fluorescent surfactants, N-n-alkyl-4-(1-methylpiperazine)-1,8-naphthalimide iodine [C_nndi]I (n?=?8, 10, and 12), have been synthesized and their aggregation behavior in aqueous solution have been explored by surface tension, electric conductivity, hydrogen-1 NMR spectra, absorption, and fluorescence spectra. Compared with traditional cationic surfactants, the [C_nndi]I have a rather lower critical micelle concentration and higher surface activity. Absorption and fluorescence spectra were proved to be facile method to monitor directly the aggregation states of fluorescent surfactant molecules in solution and revealed clearly the formation of face-to-face stacked structure of the [C_nndi]I molecules driven by the π–π interactions. The micelle formation process for [C_nndi]I was demonstrated to be enthalpy-driven in the temperature range investigated. Possible aggregation process was given based on the experimental results. The combination of dye and surfactant provides a way for monitoring the formation process of micelle directly by fluorescence spectra.     

The effect of double-chain surfactants on armored bubbles: a surfactant-controlled route to colloidosomes

We find that the gas phases of air bubbles covered with anionic or cationic polystyrene latex particles dissolve on exposure to cationic and catanionic surfactants. The particles on the bubble interface are released as singlets or aggregates when the surfactant has a single hydrophobic chain, while porous colloidal capsules (colloidosomes) with the same aqueous phase inside as out are obtained when the surfactant has two hydrophobic chains. The formation of colloidosomes from the particle-covered bubbles does not appear to depend significantly on the charge of the particles, which makes it unlikely that bilayers of surfactant are stabilizing the colloidosome. While the exact mechanism of formation remains an open question, our method is a simple one-step process for obtaining colloidosomes from particle-covered bubbles.     

Role of the preparation procedure in the formation of spherical and monodisperse surfactant/polyelectrolyte complexes

Complexes formed by a double-tail cationic surfactant, didodecyldimethyl ammonium bromide, and an anionic polyelectrolyte, an alternating copolymer of poly(styrene-alt-maleic acid) in its sodium salt form, were investigated with respect to variation in the charge ratio (x) between the polyelectrolyte negative charges and the surfactant positive charges. The morphology and microstructure of the complexes were studied by light microscopy and small-angle X-ray scattering for different preparation conditions. Independent of the sample preparation procedure and the charge ratio x, the X-ray results show that the microscopic structure of the complexes is a condensed lamellar phase. By contrast, the morphology of the complexes changes dramatically with the preparation procedure. The complexes formed by mixing a surfactant solution and a polyelectrolyte solution strongly depend on x and are always extremely heterogeneous in size and shape. Surprisingly, we show that, when the two solutions interdiffuse slowly, spherical complexes of micrometric and rather uniform size are systematically obtained, independently on the initial relative amount of surfactant and polyelectrolyte. The mechanism for the formation of these peculiar complexes is discussed.     

Molecular mechanism and thermodynamics study of plasmid DNA and cationic surfactants interactions

The molecular mechanism and thermodynamics of the interactions between plasmid DNA and cationic surfactants were investigated by isothermal titration calorimetry (ITC), dynamic light scattering, surface tension measurements, and UV spectroscopy. The cationic surfactants studied include benzyldimethyldodecylammonium chloride, benzyldimethyltetradecylammonium chloride, cetylpyridinium chloride, and cetyltrimethylammonium chloride. The results indicate a critical aggregation concentration (cac) of a surfactant: above the cac the surfactant forms aggregates with plasmid DNA; below the cac, however, there is no detectable interaction between DNA and surfactant. Surfactants with longer hydrocarbon chains have smaller cac, indicating that hydrophobic interaction plays a key role in DNA-surfactant complexation. Moreover, an increase in ionic strength (I) increases the cac but decreases the critical micellization concentration (cmc). These opposite effects lead to a critical ionic strength (I(c)) at which cac = cmc; when I < I(c), cac < cmc; when I > I(c), DNA does not form complexes with surfactant micelles. In the interaction DNA exhibits a pseudophase property as the cac is a constant over a wide range of DNA concentrations. ITC data showed that the reaction is solely driven by entropy because both deltaH(o) (approximately 2-6 kJ mol(-1)) and deltaS(o) (approximately 70-110 J K(-1) mol(-1)) have positive values. In the complex, the molar ratio of DNA phosphate to surfactant is in the range of 0.63-1.05. The reaction forms sub-micrometer-sized primary particles; those aggregate at high surfactant concentrations. Taken together, the results led to an inference that there is no interaction between surfactant monomers and DNA molecules and demonstrated that DNA-cationic surfactant interactions are mediated by the hydrophobic interactions of surfactant molecules and counterion binding of DNA phosphates to the cationic surfactant aggregates.     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

Salt-induced vesicle formation from single anionic surfactant SDBS and its mixture with LSB in aqueous solution

Vesicles can be formed spontaneously in aqueous solution of a single anionic surfactant sodium dodecyl benzenesulfonate (SDBS) just under the inducement of salt, which makes the formation of vesicle much easier and simpler. The existence of vesicles was demonstrated by TEM image using the negative-staining method. The mechanism of the formation may be attributed to the compression of salt on the electric bilayer of the surfactant headgroups, which alters the packing parameter of the surfactant. The addition of the zwitterionic surfactant lauryl sulfonate betaine (LSB) makes the vesicles more stable, expands the range of formation and vesicle size, and reduces the polydispersity of the vesicles. The vesicle region was presented in a pseudoternary diagram of SDBS/LSB/brine. The variations of vesicle size with the salinity and mixing ratios, as well as the surfactant concentration, were determined using the dynamic light scattering method. It is found that the vesicle size is independent of the surfactant concentration but subject to the salinity and the mixing ratio of the two surfactants.     

表面活性剂与高分子链混合体系的模拟

计算机模拟了高分子链对表面活性剂胶束形成过程的影响，以及高分子链构象性质随胶束化过程的变化.结果表明,当高分子链与表面活性剂之间的相互作用强度超过临界值后，高分子链的存在有利于表面活性剂胶束的形成.临界聚集浓度（CAC）与临界胶束浓度（CMC）的比值CAC/CMC随高分子链长的增大和相互吸引作用的增强而减小.在CAC之前，高分子链与表面活性剂分子只有动态的聚集；但在CAC之后，表面活性剂胶束随表面活性剂浓度X的增加而增大，并静态地吸附在高分子链上，形成表面活性剂/高分子聚集体.随着表面活性剂分子的加入，高分子链的均方末端距和平均非球形因子先保持恒定；从X略小于CAC开始， 和快速减小，至极小值后又逐渐增大.模拟结果支持高分子链包裹在胶束表面的实验模型.     

Formation of water-in-CO(2) microemulsions with non-fluorous surfactant Ls-54 and solubilization of biomacromolecules

The solubility of Ls-54 surfactant in supercritical CO(2) was determined. It was found that the surfactant was highly soluble in SC CO(2) and the water-in-CO(2) microemulsions could be formed, despite it being a non-fluorous and non-siloxane nonionic surfactant. The main reasons for the high solubility and formation of the microemulsions may be that the surfactant has four CO(2)-philic groups (propylene oxide) and five hydrophilic groups (ethylene oxide) and its molecular weight are relatively low. The results of this work provide useful information for designing CO(2)-soluble non-fluorous and non-siloxane surfactants. The phase behavior of the CO(2)/Ls-54/H(2)O system, solvatochromic probe study, and the UV spectrum of lysozyme proved the existence of water domains in the SC CO(2) microemulsions. The method of synchrotron radiation small-angle X-ray scattering was used to obtain the structural information on the Ls-54 based water-in-CO(2) reverse micelles. By using the Guinier plot (ln I(q) versus q (2)) on the data sets in a defined small q range (0.022-0.040 A(-1)), the radii of the reverse micelles were obtained at different pressures and molar ratio of water to surfactant, W(0), which were in the range of 20.4-25.2 A.     

A fluorescence emission study of the formation of induced premicelles in solutions of polyelectrolytes and ionic surfactants

The interactions between PSS-co-BVE copolymers and ionic surfactants (anionic and cationic) in aqueous solution have been investigated using pyrene as a photophysical probe. Static and dynamic fluorescence determinations have been used to obtain information about the microenvironments formed between both species. Micropolarity studies using the I1/I3 ratio of the vibronic bands of pyrene and the behavior of the I(E)/I(M) ratio between the monomer and excimer emissions show the formation of hydrophobic domains. The interactions between the polyelectrolytes and the oppositely charged surfactants lead to the formation of induced premicelles at surfactant concentrations lower than the cmc of the surfactants. This aggregation process is assumed to be due to electrostatic attraction. At the same concentration, the excimer-to-monomer emission ratio shows its first peak. At higher surfactant concentrations, near the cmc, micelles with the same properties as those found in pure aqueous solution are formed. On the other side, systems containing an anionic surfactant do not show this behavior at low concentrations. There is no apparent dependence of the cac on the composition of the polymer, reinforcing the assumption that the electrostatic interactions induce the formation of the premicelles. The values of the cac's follow the same trend as for the cmc's, DTAC>DTAB>CTAC. The polarity of the induced premicelles, as measured by the I1/I3 ratio, also indicates that the microdomains formed by the longer chain surfactants are more hydrophobic than those of the shorter chain surfactants, as also happens with real micelles.     

某些硫碳菁染料在溴碘化银乳剂中聚集态的研究

本文应用三种不同晶形的溴碘化银乳剂(立方体、八面体和T-颗粒)和八种硫碳菁染料(大部分为内铵盐结构染料)进行了染料的聚集态的研究。试验结果表明,染料的J-聚集态的形成主要取决于染料的结构,其次依赖于卤化银的晶形。三种不同结构的表面活性剂对染料聚集态的形成均有影响,其中两性的表面活性剂最强,阴离子的表面活性剂次之,中性的表面活性剂最弱。二种中位甲基取代的硫碳菁染料的聚集态受表面活性剂影响最为明显,形成较强的J-态,而对其它六种染料的聚集态影响较小,J-聚集态稍有增强。     

Extension of the surfactant bridge model for the electrorheological effects of surfactant-activated suspensions

Surfactants influence the electrorheological (ER) response in two ways. At low surfactant concentrations, they enhance the ER response by enhancing the particle polarizability; at high concentrations, the response degrades (nonlinear ER response). The nonlinear ER behavior arises from the formation of surfactant bridges between the particles at high surfactant concentrations. A surfactant bridge model was introduced to explain the nonlinear behavior (tau0 proportional to En, n approximately 1) of surfactant-activated ER suspensions when surfactant bridges were formed between the particles. Here, the surfactant bridge model is extended for the prediction of both the linear and nonlinear ER behaviors of surfactant-activated ER suspensions over the low and high surfactant concentrations (for Brij 30, from 0 to 7 wt%), regardless of the formation of surfactant bridges between the particles. For 20 wt% neutral alumina suspensions in silicone oil activated by Brij 30, the predicted ER behaviors show almost the same Brij 30 concentration and electric field strength dependence. It predicts the linear E2 dependence of the ER response at low surfactant concentrations and the nonlinear ER behavior at high surfactant concentrations. Also, the estimated yield stresses show fairly good agreement with the experimental data.     

Relationship between rheological properties and one-step W/O/W multiple emulsion formation

Formation of a normal (not temporary) W/O/W multiple emulsion via the one-step method as a result of the simultaneous occurrence of catastrophic and transitional phase inversion processes has been recently reported. Critical features of this process include the emulsification temperature (corresponding to the ultralow surface tension point), the use of a specific nonionic surfactant blend and the surfactant blend/oil phase ratio, and the addition of the surfactant blend to the oil phase. The purpose of this study was to investigate physicochemical properties in an effort to gain a mechanistic understanding of the formation of these emulsions. Bulk, surface, and interfacial rheological properties of adsorbed nonionic surfactant (CremophorRH40 and Span80) films were investigated under conditions known to affect W/O/W emulsion formation. Bulk viscosity results demonstrated that CremophorRH40 has a higher mobility in oil compared than in water, explaining the significance of the solvent phase. In addition, the bulk viscosity profile of aqueous solutions containing CremophorRH40 indicated a phase transition at around 78 ± 2 °C, which is in agreement with cubic phase formation in the Winsor III region. The similarity in the interfacial elasticity values of CremophorRH40 and Span80 indicated that canola oil has a major effect on surface activity, showing the significance of vegetable oil. The highest interfacial shear elasticity and viscosity were observed when both surfactants were added to the oil phase, indicating the importance of the microstructural arrangement. CremophorRH40/Span80 complexes tended to desorb from the solution/solution interface with increasing temperature, indicating surfactant phase formation as is theoretically predicted in the Winsor III region. Together these interfacial and bulk rheology data demonstrate that one-step W/O/W emulsions form as a result of the simultaneous occurrence of phase-transition processes in the Winsor III region and explain the critical formulation and processing parameters necessary to achieve the formation of these normal W/O/W emulsions.     

Interactions between cationic starch and anionic surfactants

The surface tensions and the phase equilibria of dilute aqueous cationic starch (CS)/surfactant systems were investigated. The degree of substitution of the CS varied from 0.014 to 0.772. The surfactants investigated were sodium dodecyl sulphate (SDS), potassium octanoate (KOct), potassium dodecanoate (KDod) and sodium oleate (NaOl). The concentrations of CS were 0.001, 0.01 and 0.1 w%.Critical association concentrations (cac) occur at surfactant concentrations well below the critical micelle concentrations of the surfactants, except for KOct, KDod and NaOl at the lowest CS concentrations investigated (0.001 w%). The surface tensions of CS/surfactant solutions decrease strongly already below the cac. This is attributed to the formation of surface active associates by ion condensation. Associative phase separation of gels formed by CS and surfactant takes place at extremely low concentrations when the surfactant/polymer charge ratio is somewhat larger than 1. The gel is higly viscous and contains 40–60% water, depending on the concentration of electrolyte, the surfactant hydrocarbon chain length and the nature of the polar head of the surfactant.The concentration at which the phase separation occurs decreases with increasing surfactant chain length and the concentration of simple electrolyte, factors that promote micelle formation. This indicates that the gels are formed by association of CS to surfactant micelles. When surfactant well in excess of charge equivalence is added, the gels dissolve because the CS/surfactant complexes acquire a high charge.     

Effects of surfactants on the formation and the stability of interfacial nanobubbles

Contamination has previously been invoked to explain the flat shape and the long lifetimes of interfacial nanobubbles (INBs). In this study, the effects of surfactants on the formation and the stability of INBs were investigated when surfactants were added to the system before, during, and after the standard solvent exchange procedure (SSEP) for the formation of INBs. The solutions of sodium dodecyl sulfate (SDS) above critical micelle concentration were found to have little effect on the bubble stability. Likewise, cleaning of the substrate with a surfactant solution had little effect. In contrast, addition of a water-insoluble surfactant during the formation dramatically reduced the INBs. Finally, repeated application of SSEP to surfactant-coated substrates progressively rinsed the surfactant off the system. Thus, we found no evidence to support the hypothesis that (1) INBs are stabilized by a layer of insoluble organic contaminant or that (2) SSEP introduces surface-active materials to the system that could stabilize INBs.     

The influence of surfactant mixing ratio on nano-emulsion formation by the pit method

The formation of O/W nano-emulsions by the PIT emulsification method in water/mixed nonionic surfactant/oil systems has been studied. The hydrophilic-lipophilic properties of the surfactant were varied by mixing polyoxyethylene 4-lauryl ether (C12E4) and polyoxyethylene 6-lauryl ether (C12E6). Emulsification was performed in samples with constant oil concentration (20 wt%) by fast cooling from the corresponding HLB temperature to 25 degrees C. Nano-emulsions with droplet radius 60-70 nm and 25-30 nm were obtained at total surfactant concentrations of 4 and 8 wt%, respectively. Moreover, droplet size remained practically unchanged, independent of the surfactant mixing ratio, X(C12E6). At 4 wt% surfactant concentration, the polydispersity and instability of nano-emulsions increased with the increase in X(C12E6). However, at 8 wt% surfactant concentration, nano-emulsions with low polydispersity and high stability were obtained in a wide range of surfactant mixing ratios. Phase behavior studies showed that at 4 wt% surfactant concentration, three-liquid phases (W+D+O) coexist at the starting emulsification temperature. Furthermore, the excess oil phase with respect to the microemulsion D-phase increases with the increase in X(C12E6), which could explain the increase in instability. At 8 wt% surfactant concentration, a microemulsion D-phase is present when emulsification starts. The low droplet size and polydispersity and higher stability of these nano-emulsions have been attributed, in addition to the increase in the surface or interfacial activity, to the spontaneous emulsification produced in the microemulsion D-phase.     

Mixed micelle formation in aqueous solutions of nonyl-N-methylglucamine with sodium perfluorooctanoate at different pressures

For the mixed system of nonyl-N-methylglucamine (MEGA9) with sodium perfluorooctanoate (SPFO), the critical micelle concentrations (CMC) at atmosphreic pressure and 30°C were determined from measurement of surface tension, and those at high pressures were determined by the electroconductivity method at mole fractions of MEGA9 up to 0.6. All of MEGA9-SPFO mixed systems have been found to have a surface activity much greater than the respective pure systems, i.e., a synergism of surface activity caused by mixing MEGA9 and SPFO. The mixing reduces the pressure dependence of the CMC. This suggests that this combination is useful when it is desirable for a surfactant solution to be independent of pressure. The composition of the mixed micellar phase has been estimated by applying the Motomura equation. The Gibbs energy of the mixed micelle formation has also been calculated as a function of mole fraction of a surfactant in the surfactant mixture.To whom correspondence should be addressed.     

FORMATION OF O/W EMULSIONS BY SURFACTANT PHASE EMULSIFICATION AND THE SOLUTION BEHAVIOR OF NONIONIC SURFACTANT SYSTEM IN THE EMULSIFICATION PROCESS

Surfactant-Phase Emulsification is a very useful method to produce oil-in-water emulsions having fine and uniform droplets. The mechanism of this emulsification method and the effect of hydrophile-lipophile balance (HLB) of the surfactants on the process of this emuisification were investigated by using phase diagrams of nonionic surfactant/hexadecane/water/1,3-butanediol four component systems.

It was shown that the process of this emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant clear gel emulsion, and finally by formation of oil-in-water emulsion. By using this emulsification technique, fine oil-in-water emulsions were formed without a need for adjusting of HLB.