考虑最邻近前车综合信息的反馈控制跟驰模型

拥堵控制中, 通过车辆运行状态感知与控制的交互融合, 实现对车辆有效控制的过程, 具有信息物理融合系统的典型特征. 本文基于Konishi等的研究工作, 从交通信息系统与交通物理系统融合的角度, 进一步考虑优化速度差和安全间距对车流的影响, 在耦合映射跟驰模型中, 提出了一种考虑最邻近前车综合信息的交通拥堵反馈控制方案. 运用反馈控制理论, 给出了头车速度发生变化时交通流保持稳定的条件, 并与前人工作进行了比较. 理论分析与数值模拟结果一致表明, 耦合映射跟驰模型在本文提出的控制方案下能更有效地抑制交通拥堵. 关键词： 交通流 交通拥堵控制 耦合映射跟驰模型 信息物理融合系统     

基于智能交通系统的耦合映射跟驰模型和交通拥堵控制

基于智能交通诱导信息，提出一种改进的耦合映射跟驰模型，用于描述单车道的交通流动力学特性及其拥堵控制.利用反馈控制理论，给出了在头车速度发生变化时交通流保持稳定的条件.分析结果表明，考虑前方更多车辆的信息对交通流有致稳作用，亦即稳定性条件明显减弱.数值模拟证实了理论分析的正确性，通过与他人相关工作的比较得知，考虑智能交通诱导信息能够更有效地抑制交通拥堵. 关键词： 交通流 智能交通系统 耦合映射跟驰模型 交通拥堵控制     

考虑横向分离与超车期望的车辆跟驰模型

为了更加客观地描述实际的车辆跟驰行为, 在优化速度模型的基础上, 通过引入横向分离参数并提出超车期望和虚拟前车的概念, 建立了考虑横向分离与超车期望的车辆跟驰模型.对模型进行线性稳定性分析, 得到了模型稳定性条件, 发现车辆横向分离、超车期望和虚拟前车的位置的增加, 在车流密度较小、车速较快的情况下, 使得交通流稳定区域增大, 但在车流密度较大、车速较慢的情况下, 反而使得交通流稳定区域减小.数值模拟结果验证了模型稳定性分析的结果, 表明在交通瓶颈处等交通流密度较大、运行缓慢的区域, 为抑制交通拥堵, 应该限制车辆的横向偏移和超车行为的发生. 关键词： 交通流 车辆跟驰模型 横向分离 超车期望     

反馈控制双车道跟驰模型研究

通过引入合理的换道规则，将单车道反馈控制模型扩展成双车道交通流模型.数值仿真表明，与经典的优化速度双车道模型相比，由于引入适当的反馈控制信息，车辆速度波动变小或消失，系统不会出现严重的堵塞现象.这说明该双车道反馈控制模型能有效地抑制或缓解交通流堵塞. 关键词： 跟驰模型 双车道模型 反馈控制 堵塞抑制     

考虑前后车效应的反馈控制跟驰模型

本文中,在优化速度模型的基础上,提出一个计及跟随车与当前车车头间距的跟驰模型.从控制论角度出发,对模型进行稳定性分析,得到了模型的稳定性条件.同时,在新模型中引入了反馈控制信息,考虑当前车与前后方车辆之间的速度差.对模型进行线性分析后得到小扰动不会导致交通堵塞的条件.在开放边界条件下,对两个模型进行数值模拟,结果表明在控制信号下,车辆速度波动明显减小,拥堵现象得到有效缓解.从而证实反馈控制信号对缓解交通拥堵的重要作用.     

高速跟驰交通流动力学模型研究

为研究道路交通中的高速跟驰物理现象,针对高速跟驰车辆特点,综合考虑了驾驶员换道决策行为以及随机慢化等因素,结合前景理论等方法,提出了一种用于模拟道路交通流中高速跟驰物理现象的动力学模型(简称HCCA模型).通过计算机数值模拟,研究了高速跟驰交通流物理现象演化机理及高速跟驰特性.结果表明:与对称的双车道元胞自动机动力学模型相比,本文建立的HCCA动力学模型能够再现道路高速跟驰物理现象,并得到了道路小间距高速跟驰率超过7%的结果与实测结果相符合,最后模拟得到了丰富的交通物理现象,再现了自由流、同步流及运动阻塞等复杂交通物理现象.     

交通流双车跟驰模型与数值仿真

基于全速度差(FVD)模型,考虑双前车信息的影响,提出了交通流双车跟驰模型.通过线性稳定性分析,得到了改进模型的稳定性条件. 与FVD模型对比研究表明,改进模型的稳定区域有明显增加.数值模拟结果表明,改进模型通过调节次近邻前车信息,可以避免FVD模型中因为反应系数较小时出现负速度的缺陷.同时也表明次近邻前车对交通流存在不可忽视的影响. 关键词： 交通流 双车跟驰模型 模拟     

考虑车与车互联通讯技术的交通流跟驰模型

基于Newell跟驰模型,建立考虑车与车互联(vehicle-to-vehicle,V2V)通讯技术的单车道跟驰模型.根据V2V技术的特征,引入参数α以表征驾驶员在收到V2V技术所提供的实时交通信息后的提前反应程度.根据线性稳定分析方法,得到V2V跟驰模型的中性稳定条件.通过计算机的模拟,研究V2V技术对交通流运行的影响,分析小扰动下V2V跟驰模型对参数变化的敏感性,研究不同α取值下交通流密度波及迟滞回环的变化.研究发现:1)与全速度差跟驰模型相比,在引入V2V后,交通流在加速起步、减速刹车及遇到突发事件时,车辆运行的安全性和舒适性均得到不同程度的提升;2)V2V跟驰模型对参数α及T的变化较为敏感,且在交通流较为拥堵时,V2V技术的引入可以提升交通流的平均速度;3)参数α的增大、T的减小可以有效提升V2V跟驰模型在不同交通环境下的运行稳定性.由于可以实时地获取交通流运行的状态并针对性地改变车辆自身的运行,V2V交通流跟驰模型提升了交通流运行的稳定性.     

基于跟驰模型的列车运行优化控制模拟研究

列车运行的优化控制是降低运输成本,提高运输服务质量以及实现轨道交通可持续发展的重要方式.本文在传统优化速度跟驰模型的基础上,以能量节约为目标提出了一种改进的模拟模型,用以模拟分析城市轨道交通系统中列车运行的优化控制.所提出的模型是通过在经典的优化速度跟驰模型(见Phys.Rev.E 51 1035 Bando等,1995)中引入新的目标优化速度函数来实现在复杂限速条件下列车运行的优化控制.数值模拟则是以北京市地铁亦庄线为例,利用亦庄线实测数据开展研究.结果表明,所提出的模型能够很好地描述复杂限速条件下列车运行的动态特性,模拟测量得到的结果和亦庄线的实测数据较为符合,由此说明所提出模型的有效性.进一步,通过分析列车运行时空图,列车运行的速度变化及运行时间等,讨论了复杂环境下列车流的时空演化特性.     

随机计及相对速度的交通流跟驰模型

从研究微观个体车辆行为出发，考虑车辆加速过程的不确定性，提出了随机计及相对速度的 交通流跟驰模型(SR-OV模型).对随机相对速度的跟驰模型的动力学方程进行稳定性分析，得 到与Bando跟驰模型不同的稳定性判据，其稳定性优于Bando模型.运用摄动理论分析交通过 程中密度波的变化，结果表明，在发生交通阻塞相变时，交通密度波以mKdV方程描述的扭结 -反扭结波演化.对随机相对速度跟驰模型进行数值模拟和分析，结果发现车流速度的变化小 于Bando模型的速度变化，而且与随机概率有关，当随机考虑相对速度的概率增大时，初始 的小扰动不会放大对车流产生影响，甚至长时间就消失，这与Bando模型完全不同.数值模拟 所得到的相图与解析解相符合,而且交通流稳定区域大于Bando模型.从车间距-速度演化图上 ，随着随机概率的增大，SR-OV模型在初始时存在的滞后现象，随着时间的增长，趋于稳定 状态后，滞后曲线收敛于一小区域，滞后效应被削弱.这完全不同于Bando模型，在Bando模 型中，滞后曲线由一点向外扩散，滞后曲线区域越来越大，车流趋于不稳定状态. 关键词： 交通流 跟驰模型 稳定性判据 相对速度     

Considering Backward Effect in Coupled Map Car-Following Model

Based on the pioneer work of Konishi et al., a new control method is proposed to suppress the traffic congestion in the coupled map (CM) car-following model under open boundary condition. The influence of the following car to the system has been considered. Our method and that presented by Konishi et al. [Phys. Rev. E 60 (1999) 4000] are compared. Although both the methods could suppress the traffic jam, the simulation results show that thetemporal behavior obtained by ours is better than that proposed by the Konishi's et al. The simulation results are consistent with the theoretical analysis.     

A control method for congested traffic in the coupled map car-following model

Based on the pioneer work of Konishi et al, a new control method is presented to suppress the traffic congestion in the coupled map (CM) car-following model under an open boundary. A control signal concluding the velocity differences of the two vehicles in front is put forward. The condition under which the traffic jam can be contained is analyzed. The results are compared with that presented by Konishi et al [Phys. Rev. 1999 E 60 4000--4007]. The simulation results show that the temporal behavior obtained by our method is better than that by the Konishi's et al. method, although both the methods could suppress the traffic jam. The simulation results are consistent with the theoretical analysis.     

Modified coupled map car-following model and its delayed feedback control scheme

A modified coupled map car-following model is proposed, in which two successive vehicle headways in front of the considering vehicle is incorporated into the optimal velocity function. The steady state under certain conditions is obtained. An error system around the steady state is studied further. Moreover, the condition for the state having no traffic jam is derived. A new control scheme is presented to suppress the traffic jam in the modified coupled map car-following model under the open boundary. A control signal including the velocity differences between the following and the considering vehicles, and between the preceding and the considering vehicles is used. The condition under which the traffic jam can be well suppressed is analysed. The results are compared with that presented by Konishi et al. (the KKH model). The simulation results show that the temporal behaviour obtained in our model is better than that in the KKH model. The simulation results are in good agreement with the theoretical analysis.     

Feedback control scheme of traffic jams based on the coupled map car-following model

Based on the pioneering work of Konishi et al. [Phys. Rev. E （1999） 60 4000], a new feedback control scheme is presented to suppress traffic jams based on the coupled map car-following model under the open boundary condition. The effect of the safe headway on the traffic system is considered. According to the control theory, the condition under which traffic jams can be suppressed is analyzed. The results are compared with the previous results concerning congestion control. The simulations show that the suppression performance of our scheme on traffic jams is better than those of the previous schemes, although all the schemes can suppress traffic jams. The simulation results are consistent with theoretical analyses.     

A new coupled map car-following model considering drivers’ steady desired speed

Based on the pioneering work of Konishi et al., in consideration of the influence of drivers＇ steady desired speed ef/ect on the traffic flow, we develop a new coupled map car-following model in the real world. By use of the control theory, the stability condition of our model is derived. The validity of the present theoretical scheme is verified via numerical simulation, confirming the correctness of our theoretical analysis.     

Considering Backward Effect in Coupled Map Car-Following Model

Based on the pioneer work of Konishi et al., a new control method is proposed to suppress the traffic congestion in the coupled map （CM） car-following model under open boundary condition. The influence of the following car to the system has been considered. Our method and that presented by Konishi et al. [Phys. Rev. E 60 （1999） 4000] are compared. Although both the methods could suppress the traffic jam, the simulation results show that the temporal behavior obtained by ours is better than that proposed by the Konishi＇s et al. The simulation results are consistent with the theoretical analysis.     

A new control method based on the lattice hydrodynamic model considering the double flux difference

A new feedback control method is derived based on the lattice hydrodynamic model in a single lane. A signal based on the double flux difference is designed in the lattice hydrodynamic model to suppress the traffic jam. The stability of the model is analyzed by using the new control method. The advantage of the new model with and without the effect of double flux difference is explored by the numerical simulation. The numerical simulations demonstrate that the traffic jam can be alleviated by the control signal.     

CO2 emission control in new CM car-following model with feedback control of the optimal estimation of velocity difference under V2X environment

A new coupled map car-following model in this paper is proposed by considering the influence of the difference of the estimated optimal speed based on the coupled map (CM) car-following model under V2X environment. The stability of the new model is analyzed by applying the control theory, and the conditions are obtained for the stability of the traffic system. And the two scenes of vehicle stopping once and four times have been simulated. The simulation results show that the control term considered with optimal estimation of speed difference can effectively improve the stability of vehicle running and reduce CO₂ emissions in the CM car-following model.     

Nonlinear density wave and energy consumption investigation of traffic flow on a curved road

A new car-following model is proposed based on the full velocity difference model(FVDM) taking the influence of the friction coefficient and the road curvature into account. Through the control theory, the stability conditions are obtained,and by using nonlinear analysis, the time-dependent Ginzburg-Landau(TDGL) equation and the modified Korteweg-de Vries(mKdV) equation are derived. Furthermore, the connection between TDGL and mKdV equations is also given. The numerical simulation is consistent with the theoretical analysis. The evolution of a traffic jam and the corresponding energy consumption are explored. The numerical results show that the control scheme is effective not only to suppress the traffic jam but also to reduce the energy consumption.