孔状Co_3O_4纳米片和纳米棒的选择性合成和表征(英文)

利用两步实验选择性合成孔状Co3O4纳米片和纳米棒:首先,以Co(NO3)2·6H2O,NaOH和不同量的NH4F为原料在120℃水热6h的条件下合成了Co(OH)2-Co3O4纳米片(S1)和Co(OH)F-Co3O4纳米棒(S2);然后将所得纳米片和纳米棒在400℃时加热2h即得到多孔的Co3O4纳米片和纳米棒。所得产物用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)和透射电子显微镜(TEM)进行了表征。此外电化学测试表明Co3O4纳米棒的电容量比Co3O4纳米片的更大。     

Hydrothermal synthesis and characterization of nanorods of various titanates and titanium dioxide

The formation process of titania based nanorods during hydrothermal synthesis starting from an amorphous TiO2.nH2O gel has been investigated. Sodium tri-titanate (Na2Ti3O7) particles with a rodlike morphology were prepared by a simple hydrothermal process in the presence of a concentrated NaOH aqueous solution. The ion exchange reaction of the synthesized Na2Ti3O7 nanorods with HCl under ultrasonic treatment promotes a complete sodium substitution and the formation of H2Ti3O7 nanorods. Low-temperature annealing of the as-produced nanorods of Na2Ti3O7 and H2Ti3O7 leads to a loss of the layered crystal structure and the formation of nanorods of condensed framework phases-sodium hexa-titanate (Na2Ti6O13) and metastable TiO2-B phases, respectively. These transformations proceed without a significant change in particle morphology. The nanostructures were investigated by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), and Raman spectroscopy. The structural defects of the synthesized nanorods were investigated by high-resolution electron microscopy. The presence of planar defects can be attributed to the exfoliation of the zigzag ribbon layers into two-dimensional titanates as well as to the condensation of the layers of TiO6 octahedra into three-dimensional frameworks.     

Branched mesoporous Mn3O4 nanorods: facile synthesis and catalysis in the degradation of methylene blue

Branched MnOOH nanorods with diameters in the range of 50-150 nm and lengths of up to tens of micrometers were prepared by using potassium permanganate (KMnO(4)) and PEG 400 (PEG=polyethylene glycol) as starting materials through a simple hydrothermal process at 160 °C. After annealing at 300 °C under a N(2) atmosphere for 5 h, MnOOH nanorods became gradually dehydrated and transformed into mesoporous Mn(3)O(4) nanorods with a slight size-shrinking. The as-obtained mesoporous Mn(3)O(4) nanorods had an average surface area of 32.88 m(2) g(-1) and a mean pore size of 3.7 nm. Through tuning the experimental parameters, such as the annealing atmosphere and temperature, β-MnO(2), Mn(2)O(3), Mn(3)O(4), MnO, and Mn(5)O(8) were selectively produced. Among these structures, mesoporous Mn(3)O(4) nanorods were efficient for the catalytic degradation of methylene blue (MB) in the presence of H(2)O(2) at 80 °C.     

α-Fe2O3表面结构对NH3选择性催化还原NO活性的影响

通过水热法合成了两种具有不同形貌的α-Fe2O3纳米棒和纳米立方体,并探索了它们的中温NH3选择性催化还原(NH3-SCR)NO的活性.NH3-SCR测试表明α-Fe2O3纳米棒具有更高的催化活性.X射线粉末衍射(XRD)、场发射扫描电镜(FE-SEM)和高分辨透射电镜(HRTEM)结构分析表明:α-Fe2O3纳米棒暴露有高表面能的{110}活性面,而纳米立方体暴露的主要是低表面能的{012}晶面.H2程序升温还原(H2-TPR)和NO程序升温脱附(NO-TPD)结果证明纳米棒比纳米立方体具有更高的氧化还原性能.因此,α-Fe2O3纳米棒由于暴露高表面能的活性面具有比纳米立方体更高的NH3-SCR性能.     

Selected-control synthesis of metal phosphonate nanoparticles and nanorods

By surfactant-assisted methods, nanoscale Co(O3PC6H5).H2O species of different morphologies, namely, nanoparticles and nanorods, have been successfully synthesized and characterized. Upon removal of the organic part of the compound, peculiar Co2P2O7 porous nanorods formed.     

Co掺杂ZnO纳米棒的水热法制备及其光致发光性能

以Zn(NO3)2·6H2O 和Co(NO3)2·6H2O为原料, 通过水热法在较低温度下制备了纯ZnO和Co掺杂的ZnO(ZnO:Co)纳米棒. 利用XRD、EDS、TEM和HRTEM对样品进行了表征, 结合光致发光(PL)谱研究了样品的PL性能. 结果表明, 水热法制备纯ZnO和ZnO:Co纳米棒均具有较好的结晶度. Co2+是以替代的形式进入ZnO晶格, 掺入量为2%(原子分数)左右. 纯的ZnO纳米棒平均直径约为20 nm, 平均长度约为180 nm; 掺杂样品的平均直径值约为15 nm, 平均长度约为200 nm左右; Co掺杂轻微地影响ZnO纳米棒的生长. 另外, Co掺杂能够调整ZnO纳米棒的能带结构、提高表面态含量, 进而使得ZnO:Co纳米棒的紫外发光峰位红移, 可见光发光能力增强.     

From layered double hydroxide to spinel nanostructures: facile synthesis and characterization of nanoplatelets and nanorods

Mg-Al spinel (MgAl2O4) nanorods and nanoplatelets transformed from Mg-Al layered double hydroxide (Mg-Al-LDHs) were synthesized via a combined hydrothermal method and calcination route using Al(NO3).9H2O and Mg(NO3)2.6H2O as raw materials. The nanorods and nanoplatelets were characterized by means of physical techniques, including powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microcopy (HRTEM), selected-area electron diffraction (SAED), Fourier transform infrared spectra (FT-IR), thermogravimetric (TG), and nitrogen adsorption-desorption isotherms. XRD patterns reveal that the Mg-Al-LDHs nanostructures were obtained under a hydrothermal reaction temperature of 200 degrees C and Mg-Al spinel nanostructures were fabricated via calcination of the Mg-Al-LDHs nanostructures at 750 degrees C. It can be seen from TEM that the sizes of the Mg-Al-LDHs nanoplatelets were about 20-40 nm and the diameters of the MgAl2O4 nanorods were ca. 6 nm. The HRTEM images indicate that the crystal lattice spaces of the MgAl2O4 nanorods and nanoplatelets are 0.282 and 0.287 nm, respectively.     

焙烧温度对氧化锌纳米棒光催化生产H2O2活性的影响

过氧化氢作为一种对环境友好的、重要的化学原料,被广泛用于化学工业、漂白剂和废水处理等领域.近几十年来,过氧化氢主要通过蒽醌工艺生产.然而,该方法需要多步蒽醌加氢和氧化反应,导致较高的生产成本和能量消耗,同时伴随着大量的二氧化碳排放.另一种替代策略是在贵金属催化剂的辅助下,由氢气和氧气的混合气体在高温下直接合成.但是,氢气和氧气的混合气体在高温下存在爆炸的危险,从而限制了其大规模应用.因此,探索一种低能耗、温和条件下生产过氧化氢具有重要的意义.太阳能驱动光催化生产过氧化氢是解决上述问题的理想途径.通常认为,过氧化氢是由直接双电子还原(E(O2/H2O2)=0.68 V vs.NHE)或间接单电子O2还原(E(O2/?O2?)=-0.33 V vs.NHE)产生的.氧化锌半导体具有很的稳定性好、环保和成本低等优点,因此经常被用于二氧化碳的光催化还原、污水处理和气体传感器等领域.氧化锌的导带电势(ECB=-0.5 V vs.NHE)比氧还原电势更负,意味着它在热力学上满足光催化过氧化氢生产的要求.然而,目前关于氧化锌的光催化生产过氧化氢的研究尚未受到较多的关注.本文采用简单的水热法制备了一维氧化锌纳米棒,在不同温度下热处理后,对其形貌和结构、光学性质和电化学性质进行了表征.同时,系统地研究了以乙醇为牺牲剂光催化生产过氧化氢的性能.结果表明,随着焙烧温度的升高,氧化锌纳米棒内部的氧空位被空气中的氧气重新填充,其催化生成过氧化氢的活性先升高后降低.经300oC焙烧的氧化锌光催化产过氧化氢的活性最好,为285μmol L-1 h-1.同时,对过氧化氢的生成机理研究结果表明,该过程中为间接单电子O2还原过程.氧气先与一个电子反应生成超氧自由基,再与两个质子和一个电子反应生成过氧化氢分子.综上,本文为氧化锌纳米棒光催化产过氧化氢的机理研究提供了新认识,并提出了一种有前途的过氧化氢生产策略.     

Systematic synthesis and characterization of single-crystal lanthanide phenylphosphonate nanorods

Using low-temperature hydrothermal methods, nanoscale lanthanide phenylphosphonates species with different morphologies, namely, nanoparticles and nanorods, have been systematically synthesized. The possible growth mechanism of these nanorods was discussed. X-ray diffraction, transmission electron microscopy, electron diffraction, and photoluminescence spectra were used to characterize these materials. The photoluminescent properties of Eu(O3PC6H5)(HO3PC6H5) and La0.91Eu0.09(O3PC6H5)(HO3PC6H5) nanorods were discussed.     

Synthesis of W18O49 nanorod via ammonium tungsten oxide and its interesting optical properties

W(18)O(49) nanorods were synthesized by pyrolyzing (NH(4))(x)WO(3+x/2) nanorods precursors, which were prepared by a hydrothermal reaction using sulfate as a structure-directing agent, in a reductive atmosphere of H(2)(5 vol %)/N(2) at 500 °C for 1 h. W(18)O(49) nanorods showed high transmittance in the visible region as well as excellent shielding properties of NIR lights. A simulated experiment revealed that excellent heat insulating performance can be realized by applying a 70% visible light transparent W(18)O(49) coating on a quartz glass. Meanwhile, the W(18)O(49) nanorods also showed strong absorption of NIR light and instantaneous conversion of photoenergy to heat. In a word, W(18)O(49) nanorods hold interesting optical properties and are a promising material in a wide range of applications.     

Synthesis and optical properties of colloidal tungsten oxide nanorods

Thermal decomposition of W(CO)6 in oleylamine in the presence of mild oxidant Me3NO.2H2O produces tungsten oxide nanorods with diameters ranging from 3 to 6 nm. The size of nanorods can be easily varied by the employed surfactant ratio or reaction temperature. The prepared tungsten oxide nanorods exhibit strong photoluminescence (PL) peaks in 300-500 nm, which show a weak size dependency.     

Morphology-directed synthesis of Co3O4 nanotubes based on modified Kirkendall effect and its application in CH4 combustion

We reported the morphology-directed synthesis of Co(3)O(4) nanotubes via interfacial reaction of NaOH with pre-fabricated CoC(2)O(4)·2H(2)O nanorods based on modified Kirkendall effect. The as-obtained Co(3)O(4) nanotubes showed excellent activity and durability in catalytic combustion of CH(4).     

Hydrothermal Tm3+-Lu2O3 nanorods with highly efficient 2 μm emission

Cubic Ia3Tm-Lu(2)O(3) porous nanorods of ～45 μm length and 90 nm diameter have been prepared with precise compositions through a soft hydrothermal route (i.e., autogenic pressure, neutral pH, and 185 °C for 24 h) by using chloride reagents. For these nanorods, room temperature excitation and photoluminescence spectra of Tm(3+) multiplets related to the eye-safe (3)F(4)→(3)H(6) laser transition at ～1.85-2.05 μm are similar to those of bulk crystals. Room-temperature luminescence decays of (3)H(4) and (3)F(4) exhibit nonexponential dynamics analytically reproduced by the sum of two exponential regimes, which are ascribed to the different rates of nonradiative relaxations in defects at the surface and in the body of the nanocrystals, respectively. Measured fluorescence lifetimes τ ～ 200-260 μs and τ ～ 2.3-2.9 ms for (3)H(4) and (3)F(4), respectively, in 0.2% mol Tm-Lu(2)O(3) nanorods, are considerably larger than in previous nanocrystalline Tm-doped sesquioxides, and they are close to values of bulk sesquioxide crystals with equivalent Tm(3+) content.     

EDTA辅助水热法合成硫化铋晶体

以Bi(NO3)3·5H2O和Na2S2O3·5H2O为原料,用乙二胺四乙酸(EDTA)辅助水热法合成了纳米或微米级的Bi2S3晶体(1),其结构、形貌和光谱性能经XRD,FE-SEM和UV-Vis表征。结果表明:溶液的pH对1的形貌有显著的影响,随着pH的增大,1由纳米棒组成的微米球逐渐转变为微米级片状结构;1出现蓝移。     

A simple mixed-solvothermal route for LaPO4 nanorods: synthesis, characterization, affecting factors and PL properties of LaPO4:Ce3+

In this paper, LaPO(4) nanorods have been successfully synthesized via a simple water-ethyleneglycol (H(2)O-EG) mixed-solvothermal route, employing lanthanum nitrate (La(NO(3))(3)·xH(2)O) as a La(3+) ion source and monobasic sodium phosphate (NaH(2)PO(4)·2H(2)O) as a PO(4)(3-) ion source. The as-obtained products were characterized by means of X-ray powder diffraction (XRD), energy dispersive spectrometry (EDS), (high resolution) transmission electron microscopy (HR/TEM), selected area electron diffraction (SAED) and field emission scanning electron microscopy (FESEM). Some factors influencing the formation of LaPO(4) nanorods, including the reaction temperature, the volume ratio of water/EG and the original amount of H(2)PO(4)(-) ions, were investigated. Experiments showed that the volume ratio of water/EG and the original amount of H(2)PO(4)(-) ions could markedly affect the morphology of the final product.     

Er3+和Ce3+/Ce4+掺杂β-BaB2O4纳米棒的制备、结构与发光性质

以Ba(NO3)2、NaBH4、Er2O3和CeO2为原料, 在十六烷基三甲基溴化铵(CTAB)表面活性剂辅助下, 采用水热法制备了β-BaB2O4 (β-BBO)纳米棒, 稀土离子Er3+单掺杂的β-BBO(β-BBO:Er3+)及Er3+和Ce3+/Ce4+共掺杂的β-BBO(β-BBO:Er3+/Ce3+/Ce4+)纳米棒. 通过X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)和光致发光(PL)光谱分别对样品的物相、结构、形貌、成分及光致发光性质进行了表征. 研究结果表明: 微量稀土离子掺杂并不改变β-BBO的结构, 制得的纳米棒尺寸均匀, 长度在200-500 nm 之间, 直径在10-20 nm 之间; β-BBO:Er3+和β-BBO:Er3+/Ce3+/Ce4+纳米棒在400nm光激发下, 在可见光范围内都观察到中心波长为515和542 nm的绿光. 对发光机理的初步研究表明: 发光分别对应于Er3+的2H11/2→4I15/2, 4S3/2→4I15/2跃迁, 铈离子以Ce3+和Ce4+两种形式存在于体系中, Ce3+对Er3+起敏化作用, 可以显著增强β-BBO:Er3+/Ce3+/Ce4+纳米棒的发光强度, 存在Ce3+→Er3+的能量传递过程.     

Selected-control synthesis of PbO2 and Pb3O4 single-crystalline nanorods

Reaction of Pb(OH)3- with ClO- in the presence of surfactant CTAB under conventional conditions resulted in PbO2 nanorods, whereas the reaction under hydrothermal conditions afforded Pb3O4 nanorods, as confirmed by X-ray powder diffraction and transmission electron microscopy (TEM). Selected area electron diffraction (SEAD) and high-resolution TEM (HRTEM) revealed that both PbO2 and Pb3O4 nanorods are single crystalline. For the formation of Pb3O4 nanorods, it is reasonable that PbO2 slowly decomposes to Pb3O4 under hydrothermal conditions, while retaining the morphology of PbO2.     

A mild liquid reduction route toward uniform blue-emitting EuCl2 nanoprisms and nanorods

In this work, for the first time, uniform blue-emitting EuCl(2) nanoprisms and nanorods were synthesized from Eu(CCl(3)COO)(3)·2H(2)O [or Eu(CH(3)COO)(3)·H(2)O] by a novel mild liquid reduction route, using acetamidine hydrochloride (or picolinamidine hydrochloride) as the reductant in oleylamine. The synthetic reaction even can take place under an atmosphere in the absence of inert gas at around 300 °C. The EuCl(2) nanoprism dispersion in n-hexane showed an intense blue emission when excited by UV light.     

Hierarchical nanostructures of fluorinated and naked Ta2O5 single crystalline nanorods: hydrothermal preparation, formation mechanism and photocatalytic activity for H2 production

The hydrolysis of H(2)TaF(7) when it slowly forms via etching Ta powders with HF and H(2)O(2) under hydrothermal conditions produces hierarchical nanostructures of fluorinated and naked Ta(2)O(5) single-crystalline nanorods, which exhibit a far greater photocatalytic activity for H(2) production than commercial Ta(2)O(5) particles.     

Facile preparation of self-assembled hydrogel-like GdPO4*H2O nanorods

Of the methods employed in the preparation of one-dimensional lanthanide phosphate (LnPO(4)) nanorods/nanowires, such as GdPO(4), the hydrothermal method has been mainly used as a synthetic route. In this study, we report a facile low-temperature solution approach to prepare GdPO 4*H(2)O nanorods by simply refluxing GdCl(3) and KH(2)PO(4) for only 15 min at 88 degrees C, an approach that can easily be scaled up by increasing the reagent amounts. We observed a highly viscous macroscopic hydrogel-like material when we mixed as-prepared GdPO(4)*H(2)O nanomaterials with H(2)O. Hydrogels are an important class of biomaterials. Their building blocks, normally formed from protein-, peptide-, polymer-, and lipid-based materials, offer three-dimensional scaffolds for drug delivery, tissue engineering, and biosensors. Our preliminary results showed that GdPO(4)*H(2)O hydrogels could be used for encapsulation and drug release, and that they were biocompatible, acting as scaffolds to foster cell proliferation. These findings suggested that they might have biomedical uses. Our findings may lead to the creation of other inorganic nanomaterial-based hydrogels apart from the organic and biomolecular protein-, peptide-, polymer-, and lipid-based building blocks.