混凝土黏塑性动力损伤本构关系

从静力弹塑性损伤本构关系的基本框架出发, 综合考虑塑性应变与损伤 演化的率敏感性, 建立了能够较为全面地描述混凝土在动力加载条件下非线性性能的混凝土 黏塑性动力损伤本构模型. 为了考虑塑性应变的率敏感性, 基于Perzyna理论推导了有效应 力空间黏塑性力学基本公式, 采用改进的Perzyna型动力演化方程, 将损伤静力演化方程推 广到动力加载情形. 基于并联弹簧模型, 从概率论的角度推导给出了一维损伤静力演化方程, 并基于能量等效应变的基本概念将其推广到多维损伤演化. 利用数值模拟, 计算得到了 混凝土在不同应变率下的应力应变全曲线, 同时得到了一维动力提高因子和二维动力强度包 络图, 数值结果与试验结果的对比表明了该模型的有效性.     

微孔洞唯象损伤力学模型及其应用

基于微损伤发展的NAG(nucleation and growth)模型,从唯相角度,得到了一种微孔洞损伤演化方程。在考虑损伤软化和温度软化的基础上得到了材料含损伤本构关系。将损伤演化方程和材料本构关系引入ABAQUS有限元软件对D6AC和921两种钢板撞击层裂问题进行数值模拟。模拟结果与实验结果吻合。     

45#钢的损伤演化方程和层裂准则研究

通过唯象分析和细观物理统计相结合的方法建立了一种韧性材料的损伤演化方程。在试验结果和内变量理论的基础上得到了45#钢的含损伤热—粘塑性本构关系。用有限差分方法计算了45#钢平板撞击所产生的应力波传播规律、损伤演化规律及层裂进程。通过自由面速度历史的数值模拟,并基于计算结果与试验结果间的最佳一致性,得到了损伤演化方程中的材料参数和极限损伤数值,并以此为依据建立了材料的应力率层裂准则。     

延性介质动态损伤模型

本文借鉴Johnson的基本方法,采用高应变率下的应力应变关系,以一个球形实体中含有球形空穴为基本力学单元,通过分析基元的受力状况,采用奇异摄动方法,推导出了空穴膨胀比的演化方程。方程中考虑了材料的硬化和应变率效应,同时又计及了惯性效应,在考虑空穴成校对损伤的影响时,采用了Chu和Needleman的结果,利用本文提出的模型对两个一维高速碰撞实验进行了数值模拟,计算结果与实验吻合较好。     

一个修正的金属材料低周疲劳损伤模型

疲劳破坏是金属最常见的失效形式之一。基于连续损伤力学理论和能量原理,本文提出了一个修正的金属材料低周疲劳损伤演化方程,该方程综合考虑了材料的塑性强化、微裂纹闭合效应等因素对损伤累积的影响。将修正后的损伤演化方程以UMAT子程序的形式导入有限元计算软件ABAQUS之中,建立了疲劳损伤的计算模型,并以铝合金7050-T7451为例对该模型的有效性和适用性进行了验证。     

延性材料动态损伤演化模型研究

从微损伤系统的统计描述出发，应用Ｍｏｒｉ－Ｔａｎａｋａ理论的物理思想，考虑了微孔洞间的相互作用，建立了延性材料动态损伤的统计演化模型。结果能够描述材料在外载作用下的损伤弱化效应。还分析了材料变形中的两种不同的耗散机制，考虑了含损伤的本构关系。将上述模型用于几种材料的层裂过程数值模拟，并与实验结果作了初步比较。     

含基体横向损伤的黏弹性板的蠕变后屈曲分析

基于Schapery三维黏弹性损伤本构关系,引入沈为和Kachanov损伤演化方程,建立了基体横向损伤的纤维单一方向铺设黏弹性板的损伤模型;应用von Karman板理论,导出了考虑损伤效应的具初始挠度的纤维单一方向铺设黏弹性矩形板的非线性压屈平衡方程. 对未知变量在空间上采用差分法离散,时间上采用增量算法和Newton-Cotes积分法离散,控制方程被迭代求解. 算例中讨论了损伤以及有关参数对黏弹性复合材料板后屈曲行为的影响,且与已有文献的结果进行了比较. 数值结果表明：随着外载荷或者初始挠度的增大,板后屈曲趋于稳定时的挠度就愈大,损伤的影响愈明显;而随着长宽比的增大,板后屈曲趋于稳定时的挠度愈小,损伤的影响却随之增大.     

损伤演化对韧性金属碎裂过程的影响

固体在冲击拉伸载荷作用下会断裂成多个碎片,基于线性内聚力断裂假设的Mott-Grady模型能较好地预测碎裂过程所产生的平均碎片尺度的下限。然而实际上,韧性金属的损伤演化是多元化的,为此通过数值模拟方法研究了不同损伤演化规律对韧性碎裂过程的影响。利用ABAQUS/Explicit动态有限元软件数值再现了韧性金属杆（45钢）在高应变率下拉伸碎裂的过程,分析了线性和非线性损伤演化对韧性碎裂过程的影响规律。结果表明:损伤演化规律对韧性金属的碎裂过程具有显著影响,非线性指标α越大,碎裂过程产生的碎片数越少;Grady-Kipp碎裂公式仍能在一定范围内预测韧性碎裂过程中产生的碎片尺寸;当非线性指标α远大于零时,在较低冲击拉伸载荷作用下,数值模拟结果和Grady-Kipp模型预测值偏差较大,随着应变率增大,数值模拟结果与Grady-Kipp模型预测值吻合较好。     

变温场中具损伤粘弹性矩形板的非线性动力响应分析

基于热粘弹性理论、Von Karman板理论和连续损伤力学,导出了二维状态下各向同性材料的变温粘弹性本构方程,建立了含损伤效应的各向同性粘弹性矩形板在变温场中的非线性运动控制方程,且应用有限差分法对问题进行求解.算例中,讨论了损伤演化及温度场等因素对粘弹性矩形板非线性动力学行为的影响,得出一些有意义的结论.     

静电激励MEMS微结构吸合电压尺寸效应研究

基于应变梯度弹性理论,研究了静电激励MEMS微结构吸合电压的尺寸效应。利用最小势能原理分别推导出含尺寸效应的一维梁模型和二维板模型的高阶控制方程。采用广义微分求积法和拟弧长算法对控制方程进行了数值求解。结果表明,随着结构尺寸的降低,新模型所预测的归一化的吸合电压呈非线性增长,表现出尺寸效应(特别是当结构尺寸与内禀常数在同一数量级时尺寸效应更加强烈);而相应的经典理论模型并不能预测此尺寸效应。两种新模型可视为相应经典理论的推广。本文有助于研究MEMS微结构的特性并对微结构的设计有潜在的应用价值。     

Closed trans-scale statistical microdamage mechanics

Damage and failure due to distributed microcracks or microvoids are on the challenging frontiers of solid mechanics. This appeals strongly to tools not yet fully developed in continuum damage mechanics, in particular to irreversible statistical thermodynamics and a unified macroscopic equations of mechanics and kinetic equations of microstructural transformations. This review provides the state of the art in statistical microdamage mechanics.

Spallation analysis with a closed trans-scale formulation of damage evolution

A closed, trans-scale formulation of damage evolution based on the statistical microdamage mechanics is summarized in this paper. The dynamic function of damage bridges the mesoscopic and macroscopic evolution of damage. The spallation in an aluminium plate is studied with this formulation. It is found that the damage evolution is governed by several dimensionless parameters, i.e., imposed Deborah numbersDe ^* andDe, Mach numberM and damage numberS. In particular, the most critical mode of the macroscopic damage evolution, i.e., the damage localization, is determined by Deborah numberDe ^*. Deborah numberDe ^* reflects the coupling and competition between the macroscopic loading and the microdamage growth. Therefore, our results reveal the multi-scale nature of spallation. In fact, the damage localization results from the nonlinearity of the microdamage growth. In addition, the dependence of the damage rate on imposed Deborah numbersDe ^* andDe, Mach numberM and damage numberS is discussed. The project supported by the National Natural Science Foundation of China (10172084, 10232040, 10232050, 10372012, 10302029) and the Special Funds for Major State Research Project (G200077305)     

Weibull modulus for diverse strength due to sample-specificity

By sample specificity it is meant that specimens with the same nominal material parameters and tested under the same environmental conditions may exhibit different behavior with diversified strength. Such an effect has been widely observed in the testing of material failure and is usually attributed to the heterogeneity of material at the mesoscopic level. The degree with which mesoscopic heterogeneity affects macroscopic failure is still not clear. Recently, the problem has been examined by making use of statistical ensemble evolution of dynamical system and the mesoscopic stress re-distribution model (SRD). Sample specificity was observed for non-global mean stress field models, such as the cluster mean field model, stress concentration at tip of microdamage, etc. Certain heterogeneity of microdamage could be sensitive to particular SRD leading to domino type of coalescence. Such an effect could start from the microdamage heterogeneity and then be magnified to other scale levels. This trans-scale sensitivity is the origin of sample specificity. The sample specificity leads to a failure probability Φ_N with a transitional region 0<Φ_N<1, so that globally stable and catastrophic modes could co-exist. It is found that the scatter in strength can fit the Weibull distribution very well. Hence, the Weibull modulus is indicative of sample specificity. Numerical results obtained from the SRD for different non-global mean stress fields show that Weibull modulus increases with increasing sample span and influence region of microdamage.     

SiCp/ZL101AI复合材料中的层裂微损伤演化行为

对ＳｉＣｐ／ＺＬ１０１Ａｌ复合材料进行了层裂损伤演化实验，得到了试样的层裂损伤演化图像．通过对这些微损伤演化图像的微观观察和对微损伤的统计定量分析，发现在层裂损伤演化过程中，微损伤的形成和发展不仅与应力水平、作用时间相关，而且还与材料中的微结构分布密切相关．通过层裂损伤演化实验，得到了在这种复合材料中，微裂纹在基体中的扩展速度及其与宏观应力水平的关系     

SiCp/ZL101AI复合材料中的层裂微损伤演化行为

对ＳｉＣｐ／ＺＬ１０１Ａｌ复合材料进行了层裂损伤演化实验，得到了试样的层裂损伤演化图像．通过对这些微损伤演化图像的微观观察和对微损伤的统计定量分析，发现在层裂损伤演化过程中，微损伤的形成和发展不仅与应力水平、作用时间相关，而且还与材料中的微结构分布密切相关．通过层裂损伤演化实验，得到了在这种复合材料中，微裂纹在基体中的扩展速度及其与宏观应力水平的关系     

Damage evaluation and damage localization of rock

Knowledge of damage accumulation and corresponding failure evolution are prerequisite for effective maintenance of civil engineering so as to avoid disaster. Based on statistical mesoscopic damage mechanics, it was revealed that there are three stages in the process of deformation, damage and failure of multiscale heterogeneous elastic–brittle medium. These are uniformly distributed damage, localized damage and catastrophic failure. In order to identify the transitions from scattering damage to macroscopically localized one, a condition for damage localization was given. The experiments of rock under uniaxial compression with the aid of observations of acoustic emission and speckle correlation do support the concept of localization. This provides a potential approach to properly evaluate damage accumulation in practice. In addition, it is found in the experiments that catastrophic failure displays critical sensitivity. This gives a helpful clue to the prediction of catastrophic failure.     

脆性材料热-力耦合模型及热破裂数值分析方法

针对混凝土、岩石等脆性材料,利用热传导和热-力耦合的相关理论,并结合材料在细观尺度上的损伤演化规律,提出了一种考虑损伤的热-力耦合模型,并在原有材料破坏过程分析系统RFPA(Realistic Failure Process Analysis)模型的基础上建立了脆性材料热破裂过程分析的数值模拟方法.该方法考虑了脆性材料在细观层次上力学性质的非均匀性(包括强度、弹模、传导系数等),并通过统计分布函数建立了宏、细观力学性能之间的联系.对不同均匀程度材料的数值模拟结果表明:材料的非均匀性对热传导规律、热应力分布以及热破坏模式有较大的影响.材料热力学性质的非均匀性加剧了材料内部热应力分布的非均匀性,这是致使非均匀材料热破裂的一个重要因素.对稳态和瞬态热传导两种条件下的脆性介质破裂过程模拟分析表明,考虑瞬态热传导计算所得到的破裂区小于相同条件下稳态热传导所得到的结果,表明在热破裂过程分析中,应注重考虑瞬态热传导对破裂过程的影响.     

Constitutive modeling of deformation and damage in superplastic materials

The superplastic deformation and cavitation damage characteristics of a modified aluminum alloy are investigated at a temperature range from 500 to 550°C. The baseline alloy is AA5083. Nominally this alloy contains about 4.5% Mg, 0.8% Mn, 0.2% Cr, 0.037% Si, 0.08% Fe and 0.025% Ti by weight. The experimental program consists of uniaxial tension tests and digital image analysis for measuring cavitation. The experiments reveal that evolution of damage is due to both nucleation and growth of voids. A viscoplastic model for describing deformation and damage in this alloy is developed based on a continuum mechanics framework. The model includes the effect of strain hardening, strain rate sensitivity, dynamic and static recovery, and nucleation and growth of voids. The model predictions compare well with the experimental results.     

A first-order strain gradient damage model for simulating quasi-brittle failure in porous elastic solids

In order to simulate quasi-brittle failure in porous elastic solids, a continuum damage model has been developed within the framework of strain gradient elasticity. An essential ingredient of the continuum damage model is the local strain energy density for pure elastic response as a function of the void volume fraction, the local strains and the strain gradients, respectively. The model adopts Griffith’s approach, widely used in linear elastic fracture mechanics, for predicting the onset and the evolution of damage due to evolving micro-cracks. The effect of those micro-cracks on the local material stiffness is taken into account by defining an effective void volume fraction. Thermodynamic considerations are used to specify the evolution of the latter. The principal features of the model are demonstrated by means of a one-dimensional example. Key aspects are discussed using analytical results and numerical simulations. Contrary to other continuum damage models with similar objectives, the model proposed here includes the effect of the internal length parameter on the onset of damage evolution. Furthermore, it is able to account for boundary layer effects.