Correlation of photoluminescence of (Y, Ln)VO4:Eu (Ln=Gd and La) phosphors with their crystal structures

We have studied the photoluminescence (PL) of (Y, Ln)VO₄:Eu³⁺ (Ln=La and Gd) phosphors and the correlation of the PL of those phosphor with their crystal structure. It is found that (Y, Gd)VO₄:Eu³⁺ phosphors have the same crystal structure as YVO₄:Eu³⁺, which is tetragonal with a little different lattice parameters. In the case of (Y, La)VO₄:Eu³⁺ phosphors, however, the gradual change from tetragonal to monoclinic structure of host lattice was observed as the amount of La ion increased. To investigate the PL property of (Y, Ln)VO₄:Eu³⁺ (Ln=La and Gd) phosphors, vacuum ultraviolet (VUV) and ultraviolet (UV) excitation were used. The favorable crystal structure for the PL intensity of orthovanadate phosphor under 147 and 254 nm excitation was tetragonal containing Gd ion and under 365 nm excitation was monoclinic containing La ion which might have the lowest site symmetry for Eu³⁺ ion.     

Photoluminescence characteristics of ZnO doped with Eu powders

In this work, we have investigated the photoluminescence spectra of europium-doped zinc oxide crystallites prepared by a vibrating milled solid-state reaction method. X-ray diffraction, scanning electron microscopy, luminescence spectra and time-resolved spectra analysis were used to characterize the synthetic ZnO:Eu³⁺ powders. XRD results of the powders showed a typical wurtzite hexagonal crystal structure. A second phase occurred at 5 mol% Eu₂O₃-doped ZnO. The ⁵D₀-⁷F₁ (590 nm) and ⁵D₀-⁷F₂ (609 nm) emission characteristics of Eu³⁺ appeared after quenching with more than 1.5 mol% Eu₂O₃ doping. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of a ZnO:Eu³⁺ host excited at λ_ex=467 nm revealed a red-shift phenomenon with increase in Eu³⁺ ion doping. The lifetime of the Eu³⁺ ion decreased as the doping concentration was increased from 1.5 to 10 mol%, and the time-resolved ⁵D₀→⁷F₂ transition presents a single-exponential decay behavior.     

Photoluminescence studies of red-emitting NaEu(WO4)2 as a near-UV or blue convertible phosphor

Sodium europium double tungstate [NaEu(WO₄)₂] phosphor was prepared by the solid-state reaction method. Its crystal structure, photoluminescence properties and thermal quenching characteristics were investigated aiming at the potential application in the field of white light-emitting diodes (LEDs). The influences of Sm doping on the photoluminescence properties of this phosphor were also studied. It is found that this phosphor can be effectively excited by 394 or 464 nm light, which nicely match the output wavelengths of near-ultraviolet (UV) or blue LED chips. Under 394 or 464 nm light excitation, this phosphor exhibits stronger emission intensity than the Y₂O₂S:Eu³⁺ or Eu²⁺-activated sulfide phosphor. The introduction of Sm³⁺ ions can broaden the excitation peaks at 394 and 464 nm of the NaEu(WO₄)₂ phosphor and significantly enhance its relative luminance under 400 and 460 nm LEDs excitation. Furthermore, the relative luminance of NaEu(WO₄)₂ phosphor shows a superior thermal stability compared with the commercially used sulfide or oxysulfide phosphor, and make it a promising red phosphor for solid-state lighting devices based on near-UV or blue LED chips.     

Synthesis and luminescent properties of a new red-emitting phosphor for solid-state lighting: Eu0.1GdxLa1.9−xTeO6 (0.02?x?0.1)

The photoluminescence (PL) emission and excitation behavior of red-emitting Eu_0.1Gd_xLa_1.9−xTeO₆ (0.02?x?0.1) powder phosphors is reported. Three dominant bands centered at 395, 466 and 534 nm characterized the excitation spectrum. Under the excitation of 395 nm UV light, the emission spectrum exhibits an intense peak centered at 616 nm corresponding to the ⁵D₀→⁷F₂ transition of Eu³⁺. Because the f→f transitions are located in the wavelength range of blue or near-UV range, optimized phosphor, Eu_0.10Gd_0.08La_1.82TeO₆, is a promising material for solid-state lighting based on GaN LEDs applications.     

The luminescent properties of CaYBO4:Ln(Ln=Eu, Tb) under UV-VUV range

The luminescent properties of CaYBO₄:Ln(Ln=Eu³⁺, Tb³⁺) were investigated under ultraviolet (UV) and vacuum ultraviolet (VUV) region. The CT band of Eu³⁺ at about 245 nm blue-shifted to 230 nm in VUV excitation spectrum; the band with the maximum at 183 nm was considered as the host lattice absorption. For the sample of CaYBO₄:0.08Tb³⁺, the bands at about 235 and 263 nm were assigned to the f-d transitions of Tb³⁺ and the CT band of Tb³⁺ was calculated according to Jφrgensen's theory. Under UV and VUV excitation, the main emission of Eu³⁺ corresponding to the ⁵D₀-⁷F₂ transition located at about 610 nm and two intense emission of Tb³⁺ from the ⁵D₄-⁷F₅ transition had been observed at about 542 and 552 nm, respectively. With the incorporation of Gd³⁺ into the host lattice of CaYBO₄, the luminescence of Tb³⁺ was enhanced while that of Eu³⁺ was decreased because of their different excitation mechanism.     

Quantum cutting abilities of sol-gel derived LiGdF4:Eu powders

Optical properties of europium doped LiGdF₄ (LGF) powders synthesized by the sol-gel process were investigated in the VUV range. Emission of two visible photons (due to ⁵D₀→⁷F_J transitions on two Eu³⁺ ions) per absorbed VUV photon was demonstrated indicating that a quantum cutting phenomenon takes place. This mechanism is explained by a two-step energy transfer when exciting Gd³⁺ ions in their ⁶G_J high energy level. Best luminescence efficiency was recorded at room temperature for samples with a doping rate of 5 mol% in europium ions. Effect of rare-earth concentration on internal quantum cutting efficiency was studied. Temperature dependence was also investigated and showed that the down-conversion process upon excitation at 202 nm becomes inefficient at low temperature since energy transfer from Gd³⁺ ions to Eu³⁺ ions is not effective any more. Such a result was connected with the thermal population at room temperature of Eu³⁺⁷F₁ state which is involves in the first step of the energy transfer.     

Enhanced luminescence of GdTaO4:Eu thin-film phosphors by K doping

The effect of K⁺ ions on GdTaO₄:Eu³⁺ thin-film phosphors was investigated in order to improve their luminescent properties. The GdTaO₄:Eu_0.1, K_x thin films were synthesized by sol-gel process, and characterized through measuring their microstructure and luminescence. The results indicated that photoluminescence (PL) intensity of GdTaO₄:Eu³⁺ film was improved remarkably by K doping. There were two maxima in the curve of PL intensity against K⁺ dopant concentration, where one was improved up to 2.1 times at x = 0.001 and the other was enhanced up to 2.7 times at x = 0.05. The first maximum was regarded as the alteration of the local environment surrounding the Eu³⁺ activator by incorporation of K⁺ ions, and the second maximum was due to the flux effect. Additionally, the luminescence increased with the increase of firing temperature from 800 °C to 1200 °C.     

Luminescent characterization of CaAl2S4:Eu powder

The photoluminescent (PL) emission and excitation behaviour of green-emitting CaAl₂S₄:Eu²⁺ powder phosphor is reported in detail. CaAl₂S₄:Eu²⁺ emission provides good CIE colour coordinates (x=0.141; y=0.721) for the green component in display applications. Powder with a dopant concentration of 8.5 mol% shows the highest luminescence efficiency. Temperature dependence of the radiative properties, such as luminescence intensity and decay time, was investigated. In particular, the Stokes shift, the mean phonon energy, the redshift, the energy of the f→d and d→f transition and the crystal field splitting of the CaAl₂S₄:Eu²⁺ emission were determined. The thermal quenching of the emission was examined.     

Ca2BO3Cl:Ce,Eu: A potential tunable yellow-white-blue-emitting phosphors for white light-emitting diodes

Polycrystalline Ca₂BO₃Cl:Ce³⁺,Eu²⁺ phosphors were synthesized by a solid-state reaction and which could display tunable color emission from blue to yellow under an ultraviolet (UV) source by adjusting the ratio of Ce³⁺ and Eu²⁺ appropriately. The mechanism of resonance-type energy transfer from Ce³⁺ to Eu²⁺ was established to be electric dipole-dipole natured, and the critical distance was estimated to be 31 Å based on the spectral overlap and concentration quenching model. A white light was obtained from Ca₂BO₃Cl:0.06Ce³⁺,0.01Eu²⁺ phosphor with chromaticity coordinates (x=0.31, y=0.29) and relative color temperature of 7330 K upon excitation with 360 nm, which is potentially a good candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Origin of PL intensity increase of CaMgSi2O6:Eu phosphor after baking process for PDPs application

We have synthesized blue-emitting CaMgSi₂O₆:Eu²⁺ (CMS) and evaluated its thermal stability after baking process. To evaluate its thermal stability, CMS was baked in air at 500 and 600 °C for 20 min, respectively, and compared with BaMgAl₁₀O₁₇:Eu²⁺ (BAM) treated in the same condition. After baking process, CMS showed somewhat increased photoluminescence (PL) intensity with baking temperature. To investigate the reasons behind the increase of PL intensity after baking process, vacuum ultraviolet (VUV)/PL, electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) techniques were applied. From the ESR and the XPS analyses, it is noted that spectral intensity of Eu²⁺ ion somewhat increased. It was believed that due to charge balance Eu³⁺ ions reduced to Eu²⁺ ions during the baking process in air. It is clear that the concentration of Eu²⁺ increased after the baking process in air and it leads to slight increase of the VUV/PL intensity of CMS phosphor.     

Luminescence and energy transfer processes in Lu2SiO5:Ce scintillator

The energy transfer processes in Lu₂SiO₅:Ce³⁺ luminescence was investigated through the temperature dependent luminescence under excitation with VUV-UV. Ce1 center emission peaking at 393 and 422 nm and Ce2 center emission peaking at 462 nm were observed. Ce2 center emission is enhanced with the temperature, which can be explained by the rate of energy transfer from Ce1 center increases when the temperature rises. The Ce1 emission shows the thermal quenching effect under the direct excitation of Ce³⁺ at 262 nm. However, under the interband excitation of 183 nm, the Ce1 center emission exhibits undulating temperature dependence. This is because the emission is governed by thermal quenching and possible thermal enhancement of the transport of free carriers with the rising temperature.     

New red phosphors BaZr(BO3)2 and SrAl2B2O7 doped with Eu for PDP applications

Vacuum ultraviolet (VUV) excitation and photoluminescence (PL) characteristics of Eu³⁺ ion doped borate phosphors; BaZr(BO₃)₂:Eu³⁺ and SrAl₂B₂O₇:Eu³⁺ are studied. The excitation spectra show strong absorption in the VUV region with the absorption band edge at ca. 200 nm for BaZr(BO₃)₂:Eu³⁺ and 183 nm for SrAl₂B₂O₇:Eu³⁺, respectively, which ensures the efficient absorption of the Xe plasma emission lines. In BaZr(BO₃)₂:Eu³⁺, the charge transfer band of Eu³⁺ does not appear strongly in the excitation spectrum, which can be enhanced by co-doping Al³⁺ ion into the BaZr(BO₃)₂ lattices. The luminescence intensity of BaZr(BO₃)₂:Eu³⁺ is also increased by Al³⁺ incorporation into the lattices. The PL spectra show the strongest emission at 615 nm corresponding to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺ in both BaZr(BO₃)₂ and SrAl₂B₂O₇, similar to that in YAl₃(BO₃)₄, which results in a good color purity for display applications.     

Luminescence properties of europium-terbium double activated calcium tungstate phosphor

Double incorporation of Eu³⁺ and Tb³⁺ ions into a CaWO₄ crystalline lattice modifies the luminescence spectrum due to the formation of new emission centers. Depending on the activators concentration and nature, as well as on the interaction between the activators themselves, the luminescence color can be varied within the entire range of the visible spectrum. Variable luminescence was obtained when CaWO₄:Eu,Tb phosphors with 0-5 mol% activator ions were exposed to relatively low excitation energies as UV (365 and 254 nm). Under high energy excitation such as VUV (147 nm) radiation or electron beam, white light has been observed.This material with controlled properties seems to be promising for the applications in fluorescent lamps, colored lightning for advertisement industries, and other optoelectronic devices.     

Highly luminescent red light phosphor CaTiO3:Eu under near-ultraviolet excitation

The Eu-doped CaTiO₃ particles with a good crystallinity were prepared via sol-gel method. The phosphors showed a strong red emission corresponding to ⁵D₀→⁷F₂ (618 nm) of Eu³⁺ under the near-ultraviolet excitation (400 nm). X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), photoluminescent (PL) analysis and Brunauer-Emmett-Teller (BET) specific surface area measurement were utilized to characterize the CaTiO₃:Eu³⁺ particles. The concentration quenching and thermal quenching of the samples were discussed as well. The optimal concentration and the calcination temperature were 16 mol% of Eu³⁺ and 1400 °C for these phosphors, and the possible reason was discussed as well. CaTiO₃:Eu³⁺ is a promising red phosphor under near-ultraviolet excitation for various applications.     

Photoluminescence investigations of Zn2SiO4 co-doped with Eu and Tb ions

Zinc silicate phosphors co-doped with Eu³⁺ ions and also with both Eu³⁺ and Tb³⁺ ions were prepared by high temperature solid state reaction in air or reducing atmosphere. The luminescence characteristics of the prepared phosphors were investigated. While in the samples prepared in air, Eu³⁺ emission was found to be dominant over Tb³⁺ emission, in the samples prepared in reducing atmosphere, intense Eu²⁺ emission at 448 nm was found to be predominant over narrow Tb³⁺ emission. Luminescence studies showed that Eu³⁺ ions occupy asymmetric sites in Zn₂SiO₄ lattice. The intense f-f absorption peak of Eu³⁺ at 395 nm observed in these phosphors suggests their potential as red emitting phosphors for near ultra-violet light emitting diodes.     

Sr2CeO4:Eu and Sr2CeO4:5 mol% Eu, 3 mol% Dy microphosphors: Wet chemistry synthesis from hybrid precursor and photoluminescence properties

In this article, Sr₂CeO₄:x mol% Eu³⁺ and Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors were synthesized from assembling hybrid precursors by wet chemical method. As-prepared samples present uniform grain-like morphology and the particle size is about 0.2 μm. The luminescence spectra of Sr₂CeO₄:x mol% Eu³⁺ have been measured to examine the influence of the intensity of red emission lines for Eu³⁺ on the concentration of Eu³⁺, showing that the intensity of the red emission increases with an increase of the concentration from 1 to 5 mol%. Additionally, from the emission spectra of Sr₂CeO₄:5 mol%Eu³⁺, 3 mol% Dy³⁺ phosphors, the characteristic lines of Dy³⁺ have also been observed. This result indicates that there also exists an energy transfer process between Sr₂CeO₄ and Dy³⁺.     

Spectroscopic investigations of Nd-, Er-, Er/Yb-, and Tm-ions doped SiO2-Al2O3-CaF2-GdF3 glasses

This paper reports on the absorption, visible and near-infrared luminescence properties of Nd³⁺, Er³⁺, Er³⁺/2Yb³⁺, and Tm³⁺ doped oxyfluoride aluminosilicate glasses. From the measured absorption spectra, Judd-Ofelt (J-O) intensity parameters (Ω₂, Ω₄ and Ω₆) have been calculated for all the studied ions. Decay lifetime curves were measured for the visible emissions of Er³⁺ (558 nm, green), and Tm³⁺ (650 and 795 nm), respectively. The near infrared emission spectrum of Nd³⁺ doped glass has shown full width at half maximum (FWHM) around 45 nm (for the ⁴F_3/2→⁴I_9/2 transition), 45 nm (for the ⁴F_3/2→⁴I_11/2 transition), and 60 nm (for the ⁴F_3/2→⁴I_13/2 transition), respectively, with 800 nm laser diode (LD) excitation. For Er³⁺, and Er³⁺/2Yb³⁺ co-doped glasses, the characteristic near infrared emission bands were spectrally centered at 1532 and 1544 nm, respectively, with 980 nm laser diode excitation, exhibiting full width at half maximum around 50 and 90 nm for the erbium ⁴I_13/2→⁴I_15/2 transition. The measured maximum decay times of ⁴I_13/2→⁴I_15/2 transition (at wavelength 1532 and 1544 nm) are about 5.280 and 5.719 ms for 1Er³⁺ and 1Er³⁺/2Yb³⁺ (mol%) co-doped glasses, respectively. The maximum stimulated emission cross sections for ⁴I_13/2→⁴I_15/2 transition of Er³⁺ and Er³⁺/Yb³⁺ are 10.81×10⁻²¹ and 5.723×10^-21 cm². These glasses with better thermal stability, bright visible emissions and broad near-infrared emissions should have potential applications in broadly tunable laser sources, interesting optical luminescent materials and broadband optical amplification at low-loss telecommunication windows.     

Synthesis and luminescence behavior of Eu-doped CaF2 nanoparticles

Luminescent Ca_1−xF_2+x:Eu_x nanoparticles were synthesized by a chemical co-precipitation method in an ethanol solution. The Ca_1−xF_2+x:Eu_x nanoparticles exhibit a sphere-like morphology with particle diameter of about 15-20 nm. With increasing concentration of Eu³⁺ ion the intensity of XRD diffraction peaks decreased significantly and full width at half-maximum of the peaks increased gradually, which indicated that more Eu³⁺ ions resulted in the increase of structural defects. The emission spectrum of Ca_1−xF_2+x:Eu_x nanoparticles consisted of a few narrow, sharp lines corresponding to Eu³⁺ ions. The luminescence intensity of Ca_1−xF_2+x:Eu_x nanoparticles increased with increasing concentration of Eu³⁺ ion and reached a maximum at approximately 15 mol%.     

Emission analysis of Eu:MgLaLiSi2O7 powder phosphor

Newly synthesized reference MgLaLiSi₂O₇ and red luminescent Eu³⁺:MgLaLiSi₂O₇ powder phosphors have been successfully developed by a solid-state reaction method to analyze their emission and structural properties from the measurement of their XRD, SEM, FTIR and PL spectra. Emission spectra of Eu³⁺ powder phosphors have shown strong red emissions at 613 nm (⁵D₀→⁷F₂). These phosphors have also shown bright red emissions under a UV source. Based on the red emission performance, the Eu³⁺ concentration has been optimized to be at 0.3 mol%.