Lipid Production by Arctic Microalga Chlamydomonas sp. KNF0008 at Low Temperatures

A lipid-producing microalga, Chlamydomonas sp. KNF0008, collected from the Arctic was capable of growing at temperatures ranging from 4 to 20 °C, and the highest cell density was measured at 15 °C and 100 μmol photons m^?2 s^?1 light intensity under continuous shaking and external aeration. KNF0008 showed the elevated accumulation of lipid bodies under nitrogen-deficient conditions, rather than under nitrogen-sufficient conditions. Fatty acid production of KNF0008 was 4.2-fold (104 mg L^?1) higher than that of C. reinhardtii CC-125 at 15 °C in Bold’s Basal Medium. The dominant fatty acids were C16:0, C16:4, C18:1, and C18:3, and unsaturated fatty acids (65.69%) were higher than saturated fatty acids (13.65%) at 15 °C. These results suggested that Arctic Chlamydomonas sp. KNF0008 could possibly be utilized for production of biodiesel during periods of cold weather because of its psychrophilic characteristics.

     

A Laccase of <Emphasis Type="Italic">Fomes durissimus</Emphasis> MTCC-1173 and Its Role in the Conversion of Methylbenzene to Benzaldehyde

A laccase has been purified from the liquid culture growth medium containing bagasse particles of Fomes durissimus. The method involved concentration of the culture filtrate by ultrafiltration and anion exchange chromatography on diethyl aminoethyl cellulose. The sodium dodecyl sulphate–polyacrylamide gel electrophoresis (SDS-PAGE) and native polyacrylamide gel electrophoresis both gave single protein band indicating that the enzyme preparation was pure. The molecular mass of the purified laccase determined from SDS-PAGE analysis was 75 kDa. Using 2,6-dimethoxyphenol as the substrate, the determined K _m and k _cat values of the laccase are 182 μM and 0.35 s⁻¹, respectively, giving a k _cat/K _m value of 1.92 × 10³ M⁻¹ s⁻¹. The pH and temperature optimum were 4.0 and 35 °C, respectively. The purified laccase has yellow colour and does not show absorption band around 610 nm found in blue laccases. Moreover, it transformed methylbenzene to benzaldehyde in the absence of mediator molecules, property exhibited by yellow laccases.     

Activity of berberine on <Emphasis Type="Italic">Shigella dysenteriae</Emphasis> investigated by microcalorimetry and multivariate analysis

In this study, the microcalorimetric method was applied to investigate the activity of berberine on Shigella dysenteriae (S. dysenteriae). Heat flow power (HFP)–time curves of the growth metabolism of S. dysenteriae affected by berberine were determined using the thermal activity monitor (TAM) air isothermal microcalorimeter, ampoule mode, at 37 °C. By analyzing these curves and some quantitative parameters using multivariate analytical methods, similarity analysis (SA) and principal component analysis (PCA), the antibacterial activity of berberine on S. dysenteriae could be accurately evaluated from the change of the two main parameters, the maximum heat flow power P _m² and total heat output Q _t: berberine at low concentration (25 μg mL⁻¹) began to inhibit the growth of S. dysenteriae, high concentrations (50–200 μg mL⁻¹) of berberine had strong antibacterial activity on S. dysenteriae, when the concentration of berberine was higher (250–300 μg mL⁻¹), this antibacterial activity was stronger. All these illustrated that the antibacterial activity of berberine on S. dysenteriae was enhanced with the increase of the concentration of this compound. Berberine can be used as potential novel antibacterial agent for treating multidrug-resistant Shigella. This work provided a useful idea of the combination of microcalorimetry and multivariate analysis for studying the activity of other compounds or drugs on organisms.     

Radiolysis of 1-naphthol in aqueous solutions

The effects of absorbed doses, initial pH and 1-naphthol concentration onto its radiolysis in aqueous sulphuric and hydrochloric acids by gamma rays from ⁶⁰Co were investigated. Under the experimental conditions, 1-naphthol degradation yields increased with increasing the absorbed doses (0.3–3.0 kGy) and with decreasing the initial 1-naphthol concentration (20–1 ppm). It was found out that the hydrated electrons did not play any significant roles in 1-naphthol radiolysis, as the degradation yields were higher at pH₀ ~ 0.46 compared to those at pH₀ ~ 2.0–5.0. The corresponding radiolytic yields G(−1-naphthol) were (6.13 ± 1.00)) × 10⁻² and (5.11 ± 0.22) × 10⁻² μmol/J in sulphuric acids, (15.61 ± 3.85) × 10⁻² and (4.76 ± 0.48) × 10⁻² μmol/J in hydrochloric acids. 1-Naphthol degradation rates could be described by the kinetic equations of pseudo-first-order reactions. An empirical relation between the observed reaction constants k _D and the initial 1-naphthol concentrations was established, enabling to predict the absorbed doses required for a given treatment efficiency. Three products of 1-naphthol degradation were revealed using an HPLC/UV procedure.     

Biomass Productivities in Wild Type and Pigment Mutant of <Emphasis Type="Italic">Cyclotella</Emphasis> sp. (Diatom)

Microalgae are expected to play a significant role in greenhouse gas mitigation because they can utilize CO₂ from power plant flue gases directly while producing a variety of renewable carbon-neutral biofuels. In order for such a microalgal climate change mitigation strategy to become economically feasible, it will be necessary to significantly improve biomass productivities. One approach to achieve this objective is to reduce, via mutagenesis, the number of light-harvesting pigments, which, according to theory, should significantly improve the light utilization efficiency, primarily by increasing the light intensity at which photosynthesis saturates (I _s). Employing chemical (ethylmethylsulfonate) and UV mutagenesis of a wild-type strain of the diatom Cyclotella, approximately 10,000 pigment mutants were generated, and two of the most promising ones (CM1 and CM1-1) were subjected to further testing in both laboratory cultures and outdoor ponds. Measurements of photosynthetic oxygen production rates as a function of light intensity (i.e., P–I curves) of samples taken from laboratory batch cultures during the exponential and linear growth phase indicated that the light intensity at which photosynthesis saturates (I _s) was two to three times greater in the pigment mutant CM1-1 than in the wild type, i.e., 355–443 versus 116–169 μmol/m² s, respectively. While theory, i.e., the Bush equation, predicts that such a significant gain in I _s should increase light utilization efficiencies and thus biomass productivities, particularly at high light intensities, no improvements in biomass productivities were observed in either semi-continuous laboratory cultures or outdoor ponds. In fact, the maximum biomass productivity in semi-continuous laboratory culture was always greater in the wild type than in the mutant, namely 883 versus 725 mg/L day, respectively, at low light intensity (200 μmol/m² s) and 1,229 versus 1,043 mg/L day, respectively, at high light intensity (1,000 μmol/m² s). Similarly, the biomass productivities measured in outdoor ponds were significantly lower for the mutant than for the wild type. Given that these mutants have not been completely characterized in these initial studies, the exact reasons for their poor performance are not known. Most likely, it is possible that the mutation procedure affected other photosynthetic or metabolic processes. This hypothesis was partially validated by the observation that the pigment mutant had a longer lag period following inoculation, a lower maximum specific growth rate, and poorer stability than the wild type.     

Immobilization of flavine adenine dinucleotide onto nickel oxide nanostructures modified glassy carbon electrode: fabrication of highly sensitive persulfate sensor

A simple method was used to fabricate flavin adenine dinucleotide (FAD)/NiOx nanocomposite on the surface of glassy carbon (GC) electrode. Cyclic voltammetry technique was applied for deposition nickel oxide nanostructures onto GC surface. Owing to its high biocompatibility and large surface area of nickel oxide nanomaterials with immersing the GC/NiOx-modified electrode into FAD solution for a short period of time, 10–140 s, a stable thin layer of the FAD molecules immobilized onto electrode surface. The FAD/NiOx films exhibited a pair of well-defined, stable, and nearly reversible CV peaks at wide pH range (2–10). The formal potential of adsorbed FAD onto nickel oxide nanoparticles film, E ^o′ vs. Ag/AgCl reference electrode is −0.44 V in pH 7 buffer solutions was similar to dissolved FAD and changed linearly with a slope of 58.6 mV/pH in the pH range 2–10. The surface coverage and heterogeneous electron transfer rate constant (k _s ) of FAD immobilized on NiOx film glassy carbon electrode are 4.66 × 10⁻¹¹ mol cm⁻² and 63 ± 0.1 s⁻¹, indicating the high loading ability of the nickel oxide nanoparticles and great facilitation of the electron transfer between FAD and nickel oxide nanoparticles. FAD/NiOx nanocomposite-modified GC electrode shows excellent electrocatalytic activity toward S₂O₈²⁻ reduction at reduced overpotential. Furthermore, rotated modified electrode illustrates good analytical performance for amperometric detection of S₂O₈²⁻. Under optimized condition, the concentration calibration range, detection limit, and sensitivity were 3 μM–1.5 mM, 0.38 μM and 16.6 nA/μM, respectively.     

Monitoring of the <Superscript>14</Superscript>C concentration in the stack air of the nuclear power plant VVER Jaslovske Bohunice

¹⁴C releases in the stack air of the NPPs V1 and V2, Jaslovske Bohunice was determined during the year 2004–2010. Radioactivity concentration of ¹⁴C in the stack air was determined in the forms of inorganic ¹⁴CO₂ and ¹⁴C _n H _m . The annual average activity concentration in the stacks air samples varies between 12 and 121 Bq m⁻³. NPP V1, starting with 45 Bq m⁻³ in 2005 is decreasing due to the shutting down of the reactors (the first reactor was shut down in December 2006 and the second reactor in December 2008). The average value of radioactivity concentration for power unit V2 was 32 Bq m⁻³ in 2004 and reached the value of 102 Bq m⁻³ in the first-quarter of the 2010. The average normalized yearly discharge rates were between 0.39 and 0.64 TBq GW_e⁻¹ year⁻¹ (2005–2008), NPP V1 and 0.19–0.61 TBq GW_e⁻¹ year⁻¹ (2004–first-quarter 2010) for NPP V2, Jaslovske Bohunice. Most of the discharged ¹⁴C is in a hydrocarbon form, (95% for Jaslovske Bohunice NPP V2), but the CO₂ fraction may reach 37% in the air stack for Jaslovske Bohunice V1.     

Characterization of a Thermostable Family 1 Glycosyl Hydrolase Enzyme from <Emphasis Type="Italic">Putranjiva roxburghii</Emphasis> Seeds

A 66-kDa thermostable family 1 Glycosyl Hydrolase (GH1) enzyme with β-glucosidase and β-galactosidase activities was purified to homogeneity from the seeds of Putranjiva roxburghii belonging to Euphorbiaceae family. N-terminal and partial internal amino acid sequences showed significant resemblance to plant GH1 enzymes. Kinetic studies showed that enzyme hydrolyzed p-nitrophenyl β-d-glucopyranoside (pNP-Glc) with higher efficiency (K _cat/K _m = 2.27 × 10⁴ M⁻¹ s⁻¹) as compared to p-nitrophenyl β-d-galactopyranoside (pNP-Gal; K _cat/K _m = 1.15 × 10⁴ M⁻¹ s⁻¹). The optimum pH for β-galactosidase activity was 4.8 and 4.4 in citrate phosphate and acetate buffers respectively, while for β-glucosidase it was 4.6 in both buffers. The activation energy was found to be 10.6 kcal/mol in the temperature range 30–65 °C. The enzyme showed maximum activity at 65 °C with half life of ~40 min and first-order rate constant of 0.0172 min⁻¹. Far-UV CD spectra of enzyme exhibited α, β pattern at room temperature at pH 8.0. This thermostable enzyme with dual specificity and higher catalytic efficiency can be utilized for different commercial applications.     

The Utilization of Post-chlorinated Municipal Domestic Wastewater for Biomass and Lipid Production by <Emphasis Type="Italic">Chlorella</Emphasis> spp. Under Batch Conditions

South Africa has a rich microalgal biodiversity which has the potential to be used for renewable bio-fuel production in the region. Bioprospecting for oleaginous microalgae in KwaZulu Natal Province, South Africa, resulted in the establishment of a microalgal culture collection system for alternative energy research in the country. A potential hyper-lipid-producing Chlorella spp. strain was isolated, purified, and cultured in supplemented post-chlorinated wastewater for biomass and lipid production at the laboratory scale under batch mode. The microalgal strain was cultivated in different strengths of BG-11 media supplemented with wastewater from a local municipal domestic wastewater treatment plant. The Chlorella spp. was grown using ambient dissolved carbon dioxide in shake flasks under photosynthetically active radiation (±120 μmolm⁻²s⁻¹). Microalgal biomass and lipid productivity were monitored at 24-h intervals in the batch mode. The microalgal biomass was analyzed by direct light microscopy and indirectly by spectrophotometry at 600 nm, and the lipids were extracted and quantified. The growth rate of the Chlorella spp. was enhanced in post-chlorinated wastewater supplemented with 5 mM NaNO₃ with maximal biomass productivity. A dramatic increase in lipid yield was achieved with the post-chlorinated wastewater supplemented with 25 mM NaNO₃. Low dosages of free chlorine were found to enhance microalgal growth. These findings serve as a basis for further scale-up trials using municipal wastewater as a medium for microalgal biomass and lipid production.     

Gene Cloning,Overexpression, and Characterization of a Xylanase from <Emphasis Type="Italic">Penicillium</Emphasis> sp. CGMCC 1669

A xylanase-encoding gene, xyn11F63, was isolated from Penicillium sp. F63 CGMCC1669 using degenerated polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL)-PCR techniques. The full-length chromosomal gene consists of 724 bp, including a 73-bp intron, and encodes a 217 amino acid polypeptide. The deduced amino acid sequence of xyn11F63 shows the highest identity of 70% to the xylanase from Penicillium sp. strain 40, which belongs to glycosyl hydrolases family 11. The gene was overexpressed in Pichia pastoris, and its activity in the culture medium reached 516 U ml⁻¹. After purification to electrophoretic homogeneity, the enzyme showed maximal activity at pH 4.5 and 40°C, was stable at acidic buffers of pH 4.5–9.0, and was resistant to proteases (proteinase K, trypsin, subtilisin A, and α-chymotrypsin). The specific activity, K _m, and V _max for oat spelt xylan substrate was 7,988 U mg⁻¹, 22.2 mg ml⁻¹, and 15,105.7 μmol min⁻¹ mg⁻¹, respectively. These properties make XYN11F63 a potential economical candidate for use in feed and food industrial applications.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

Compactin Production Studies Using <Emphasis Type="Italic">Penicillium brevicompactum</Emphasis> Under Solid-State Fermentation Conditions

In the present study, compactin production by Penicillium brevicompactum WA 2315 was optimized using solid-state fermentation. The initial one factor at a time approach resulted in improved compactin production of 905 μg gds⁻¹ compared to initial 450 μg gds⁻¹. Subsequently, nutritional, physiological, and biological parameters were screened using fractional factorial and Box–Behnken design. The fractional factorial design studied inoculum age, inoculum volume, pH, NaCl, NH₄NO₃, MgSO₄, and KH₂PO₄. All parameters were found to be significant except pH and KH₂PO₄. The Box–Behnken design studied inoculum volume, inoculum age, glycerol, and NH₄NO₃ at three different levels. Inoculum volume (p = 0.0013) and glycerol (p = 0.0001) were significant factors with greater effect on response. The interaction effects were not significant. The validation study using model-defined conditions resulted in an improved yield of 1,250 μg gds⁻¹ compactin. Further improvement in yield was obtained using fed batch mode of carbon supplementation. The feeding of glycerol (20% v/v) on day 3 resulted in further improved compactin yield of 1,406 μg gds⁻¹. The present study demonstrates that agro-industrial residues can be successfully used for compactin production, and statistical experiment designs provide an easy tool to improve the process conditions for secondary metabolite production.     

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Cloning of a New Xylanase Gene from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. TN119 Using a Modified Thermal Asymmetric Interlaced-PCR Specific for GC-Rich Genes and Biochemical Characterization

A bacterial strain, Streptomyces sp. TN119, was isolated from the gut of Batocera horsfieldi larvae and showed xylanolytic activity. A degenerate primer set was designed based on the base usage of G and C in Actinobacteria xylanase-coding sequences belonging to the glycosyl hydrolases family 10 (GH 10), and used to clone the partial xylanase gene from Streptomyces sp. TN119. A modified thermal asymmetric interlaced (TAIL)-PCR specific for high-GC genes, named GC TAIL-PCR, was developed to obtain the full-length xylanase gene (xynA119; 1089 bp). Rich in GC content (67.8%), xynA119 encodes a new GH 10 xylanase (XynA119), which shares highest identity (48.8%) with an endo-1,4-β-xylanase from Cellulosimicrobium sp. HY-12. Recombinant XynA119 was expressed in Escherichia coli BL21 (DE3) and purified to electrophoretic homogeneity. The enzyme showed maximal activity at pH 6.5 and 60 °C, was stable at pH 4.0 to 10.0 and 50 °C, was resistant to most chemicals (except for Cu²⁺, Mn²⁺, Ag⁺, Hg²⁺ and SDS) and trypsin, and produced simple products. The specific activity, K _m, V _max, and k _cat using oat-spelt xylan as substrate were 57.9 U mg⁻¹, 1.0 mg ml⁻¹, 74.8 μmol min⁻¹ mg⁻¹, and 49.2 s^–1, respectively.     

The Comparison of Lutein Production by <Emphasis Type="Italic">Scenesdesmus</Emphasis> sp. in the Autotrophic and the Mixotrophic Cultivation

The results of this study indicate that an increase in CO₂ percentage to 30% can enhance Scenedesmus sp. growth in autotrophic cultivation to a maximum of 0.85 g/l as compared with 0.6 g/l obtained in the batch with air (after 6 days of cultivation). However, while the CO₂ was higher than 30%, it showed a negative impact on cell growth. A mixotrophic cultivation with 3 g/l of glycerol can achieve 0.38 g l⁻¹ day⁻¹ of the maximum biomass productivity compared with that of 0.21 g l⁻¹ day⁻¹ in autotrophic cultivation. Nevertheless, the lutein content of the mixotrophic cultivation was 0.08–0.1% lower than 0.2–0.25% obtained in autotrophic cultivation, which led to a lower lutein productivity of 0.36 mg l⁻¹ day⁻¹ in the mixotrophic batch compared with 0.44 mg l⁻¹ day⁻¹ obtained in the autotrophic batch. The limitation of cell growth in the mixotrophic cultivation would be the contributing factor regarding the lower lutein productivity. The mixotrophic cultivation of repeated batch to remove potential inhibitive metabolic products from glycerol catabolism does not show an obvious improvement on biomass. Conclusively, mixotrophic cultivation achieves higher biomass productivity with lower lutein content than that of autotrophic cultivation, which leads to lower lutein productivity. Therefore, the autotrophic cultivation is preferred in the lutein production.     

Solid state electrochemical of the erbium hexacyanoferrate-modified carbon ceramic electrode and its electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine

A kind of erbium hexacyanoferrate (ErHCF)-modified carbon ceramic electrodes (CCEs) fabricated by mechanically attaching ErHCF samples to the surface of CCEs derived from sol–gel technique was proposed. The resulting modified electrodes exhibit well-defined redox responses with the formal potential of +0.215 V [vs saturated calomel electrode (SCE)] at a scan rate of 20 mV s⁻¹ in 0.5 M KCl (pH 7) solution. The voltammetric characteristics of the ErHCF-modified CCEs were investigated by voltammetry. Attractively, the ErHCF-modified CCEs presented good electrocatalytic activity with a marked decrease in the overvoltage about 400 mV for l-cysteine oxidation. The calibration plot for l-cysteine determination was linear at 5.0 × 10⁻⁶–1.3 × 10⁻⁴ M with a linear regression equation of I(A) = 0.558 + 0.148c (μM) (R ² = 0.9989, n = 20), and the detection limit was 2 × 10⁻⁶ M (S/N = 3). At last, the ErHCF-modified CCEs were used for amperometric detection of l-cysteine in real samples.     

Electrochemical study of Meldola's blue,methylene blue and toluidine blue immobilized on a SiO<Subscript>2</Subscript>/Sb<Subscript>2</Subscript>O3 binary oxide matrix obtained by the sol-gel processing method

SiO₂/Sb₂O₃ (SiSb), having a specific surface area, S _BET, of 788 m² g⁻¹, an average pore diameter of 1.9 nm and 4.7 wt% of Sb, was prepared by the sol-gel processing method. Meldola's blue (MeB), methylene blue (MB) and toluidine blue (TB) were immobilized on SiSb by an ion exchange reaction. The amounts of the dyes bonded to the substrate surface were 12.49, 14.26 and 22.78 μmol g⁻¹ for MeB, MB and TB, respectively. These materials were used to modify carbon paste electrodes. The midpoint potentials (E _m) of the immobilized dyes were −0.059, −0.17 and −0.18 V vs. SCE for SiSb/MeB, SiSb/MB and SiSb/TB modified carbon paste electrodes, respectively. A solution pH between 3 and 7 practically did not affect the midpoint potential of the immobilized dyes. The electrodes presented reproducible responses and were chemically stable under various oxidation-reduction cycles. Among the immobilized dyes, MeB was the most efficient to mediate the electron transfer for NADH oxidation in aqueous solution at pH 7. In this case, amperometric detection of NADH at an applied potential of 0 mV vs. SCE gives linear responses over the concentration range of 0.1–0.6 mmol L⁻¹, with a detection limit of 7 μmol L⁻¹.     

Preparation of <Superscript>99m</Superscript>Tc-PQQ and preliminary biological evaluation for the NMDA receptor

Pyrroloquinoline quinone (PQQ), an essential nutrient, antioxidant, redox modulator and nerve growth factor found in a class of enzymes called quinoproteins, was labeled with ^99mTc by using stannous fluoride (SnF₂) method. Radiolabeling qualification, quality control and characterization of ^99mTc-PQQ and its biodistribution studies in mice were performed and discussed. Effects of pH values, temperature, time and reducing agents concentration on the radiolabeling yield were investigated. The quality control procedure of ^99mTc-PQQ was determined by thin layer chromatography (TLC), radio high-performance liquid chromatography (RHPLC) and paper electrophoresis methods. The average radiolabeling yield was 94 ± 1% under optimum conditions of 0.99 mg of PQQ, 30 μg of SnF₂, 0.5 mg of ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) and 18.5 MBq of Na^99mTcO₄ at pH 6 and 25 °C with a response volume of 1 ± 0.1 mL. ^99mTc-PQQ was stable and anionic. Lipid–water partition coefficient of ^99mTc-PQQ was −1.49 ± 0.16. The pharmacokinetics parameters of ^99mTc-PQQ were t _1/2α = 18.16 min, t _1/2β = 100.45 min, K ₁₂ = 0.013 min⁻¹, K ₂₁ = 0.017 min⁻¹, K _e = 0.016 min⁻¹, AUC (area under the curve) = 1040.78 ID% g⁻¹ min and CL (plasma clearance) = 0.096 mL min⁻¹. The dual-exponential equation was Y = 10.88e^−0.038t  + 5.21e^−0.0069t . The biodistribution of ^99mTc-PQQ was studied in ICR (Institute for Cancer Research 7701 Burhelme Are., Fox Chase, Philadelphia, PA 1911 USA) mice. In vitro autoradiographic studies clearly showed that the ^99mTc-PQQ radioactivity accumulated predominantly in the hippocampus and cortex, which had a high density of N-methyl-d-aspartate Receptor (NMDAR). The enrichment can be blocked by NMDAR redox modulatory site antagonists-ebselen (EB) and ^99mTc-PQQ is therefore a promising candidate for the molecular imaging of NMDAR. To date, however, there have been no studies characterizing ^99mTc-PQQ.     

Synthesis and behaviour of hybrid polymer-silica membranes made by sol gel process with adsorbed carbonic anhydrase enzyme,in the capture of CO<Subscript>2</Subscript>

Thin nylon-SiO₂ membranes made by sol–gel SiO₂ coating of a nylon weaving were impregnated in a second step with an aqueous carbonic anhydrase solution. The biocatalytic hybrid membranes obtained were applied to the capture of CO₂ from a N₂–CO₂ gas mixture containing 10% CO₂, under a total pressure ≈ 1 atm. The CO₂ permeance of these membranes was at least similar to those previously reported for liquid membranes. When impregnated with a 0.2 mg mL⁻¹ enzyme solution in a pH ≈ 8 NaHCO₃ buffer, the permeance of a nylon-SiO₂ membrane was multiplied by a factor ≈ 3 when the buffer molarity was increased from 0.1 to 1 M. By comparison, this permeance only increased by a factor ≈ 1.3 without any enzyme in the same buffers. The permeance was also higher with the enzyme than without it: respectively ≈3.7 10⁻⁸ and ≈4.7 10⁻⁹ mol \textm_{\textmembrane} ^{- 2} {\text{m}}_{\text{membrane}}^{{^{ - 2} }} s⁻¹ Pa⁻¹ with and without enzyme, in a 1 M NaHCO₃ buffer. A maximum permeance was observed for an enzyme concentration of ≈0.2 mg mL⁻¹, possibly due to a competition between the H⁺ ions produced from CO_2,aq by the enzyme and the H⁺ captured by the buffer. Besides, when the SiO₂–CO₂ contact was enhanced by the membrane architecture, SiO₂ improved the CO₂ permeance. The influence of an in situ CaCO₃ deposit was also investigated and it improved the CO₂ permeance when no enzyme was added.     

Different Photosynthetic Responses of Pyropia yezoensis to Ultraviolet Radiation Under Changing Temperature and Photosynthetic Active Radiation Regimes

Macroalgae play a crucial role in coastal marine ecosystems, but they are also subject to multiple challenges due to tidal and seasonal alterations. In this work, we investigated the photosynthetic response of Pyropia yezoensis to ultraviolet radiation (PAR: 400–700 nm; PAB: 280–700 nm) under changing temperatures (5, 10 and 15°C) and light intensities (200, 500 and 800 μmol photons m^?2 s^?1). Under low light intensity (200 μmol photons m^?2 s^?1), P. yezoensis showed the lowest sensitivity to ultraviolet radiation, regardless of temperature. However, higher temperatures inhibited the repair rates (r) and damage rates (k) of photosystem II (PSII) in P. yezoensis. However, under higher light intensities (500 and 800 μmol photons m^?2 s^?1), P. yezoensis showed higher sensitivity to UV radiation. Both r and the ratio of repair rate to damage rate (r:k) were significantly inhibited in P. yezoensis by PAB, regardless of temperature. In addition, higher temperatures significantly decreased the relative UV‐inhibition rates, while an increased carbon fixation rate was found. Our study suggested that higher light intensities enhanced the sensitivity to UV radiation, while higher temperatures could relieve the stress caused by high light intensity and UV radiation.