The solvolysis oftrans-[Co(4-Mepy)4Cl2]ClO4 in water-methanol mixtures

Summary The solvolysis of thetrans-[Co(4-Mepy)₄Cl₂]ClO₄ complex was studied in 0 to 70% v/v H₂O: MeOH mixtures at 40, 45, 50 and 55 °C. The high negative S^* values found for the complex cation under investigation, relative to that oftrans- [Co(py)₄Cl₂]⁺ reported in the literature, were attributed to the substituent methyl groups. The free energies of transfer of both the ground and the transition states were calculated from which the dominant effect of the solvent on the transition state is apparent.     

Kinetics of the solvolysis of [Co(3Rpy)4Cl2]+ ions (R = Me or Et) in water and in water + methanol mixtures

Rates of solvolysis of ions [Co(3Rpy)₄Cl₂]⁺ with R = Me and Et have been measured over a range of temperatures for a series of water-rich water + methanol mixtures to investigate the effect of changes in solvent structure on the solvolysis of complexes presenting a largely hydrophobic surface to the solvent. The variation of the enthalpies and entropies of activation with solvent composition has been determined. A free energy cycle relating the free energy of activation in water to that in water + methanol is applied using free energies of transfer of individual ionic species from water into water + methanol. Data for the free energy of transfer of chloride ions ΔG(Cl^?) from both the spectrophotometric solvent sorting method and the TATB method for separating ΔG(salt) into ΔG(i) for individual ions are used: irrespective of the source of ΔG(Cl^?), in general, ?ΔG(Co(Rpy)₄Cl²⁺) > ?ΔG(Co(Rpy)₄Cl₂⁺), where Rpy = py, 4Mepy, 4Etpy, 3Etpy, and 3Mepy, showing that changes in solvent structure in water-rich water + methanol mixtures generally stabilize the cation in the transition state more than the cation in the initial state for this type of complex ion. A similar result is found when the free energy cycle is applied to the solvolysis of the dichloro (2,2′,2″-triaminotriethylamine)cobalt(III) ion. The introduction of a Me or Et group on the pyridine ring in [Co(Rpy)₄Cl₂]⁺ has little influence on the difference {ΔG(Co(Rpy)₄Cl²⁺)?ΔG(Co(Rpy)₄Cl₂⁺)} in water + methanol with the mol fraction of methanol < 0.20.     

Synthesis, characterization, and glutathionylation of cobalamin model complexes [Co(N4PyCO2Me)Cl]Cl2 and [Co(Bn-CDPy3)Cl]Cl2

Synthetic Co(III) complexes containing N5 donor sets undergo glutathionylation to generate biomimetic species of glutathionylcobalamin (GSCbl), an important form of cobalamin (Cbl) found in nature. For this study, a new Co(III) complex was synthesized derived from the polypyridyl pentadentate N5 ligand N4PyCO(2)Me (1). The compound [Co(N4PyCO(2)Me)Cl]Cl(2) (3) was characterized by X-ray crystallography, UV-vis, IR, (1)H NMR, and (13)C NMR spectroscopies and mass spectrometry (HRMS). Reaction of 3 with glutathione (GSH) in H(2)O generates the biomimetic species [Co(N4PyCO(2)Me)(SG)](2+) (5), which was generated in situ and characterized by UV-vis and (1)H NMR spectroscopies and HRMS. (1)H NMR and UV-vis spectroscopic data are consistent with ligation of the cysteine thiolate of GSH to the Co(III) center of 5, as occurs in GSCbl. Kinetic analysis indicated that the substitution of chloride by GS(-) occurs by a second-order process [k(1) = (10.1 ± 0.7) × 10(-2) M(-1) s(-1)]. The observed equilibrium constant for formation of 5 (K(obs) = 870 ± 50 M(-1)) is about 3 orders of magnitude smaller than for GSCbl. Reaction of the Co(III) complex [Co(Bn-CDPy3)Cl]Cl(2) (4) with GSH generates glutathionylated species [Co(Bn-CDPy3)(GS)](2+) (6), analogous to 5. Glutathionylation of 4 occurs at a similar rate [k(2) = (8.4 ± 0.5) × 10(-2) M(-1) s(-1)], and the observed equilibrium constant (K(obs) = 740 ± 47 M(-1)) is slightly smaller than for 5. Glutathionylation showed a significant pH dependence, where rates increased with pH. Taken together, these results suggest that glutathionylation is a general reaction for Co(III) complexes related to Cbl.     

Structure of [UO2Cl4]2- in acetonitrile

The complex formation of uranyl UO(2)(2+) with chloride ions in acetonitrile was studied by UV-vis and U L(III) EXAFS spectroscopy. The investigations unambiguously point to the existence of a [UO(2)Cl(4)](2-) species in solution with D(4)(h)() symmetry. The distances in the U(VI) coordination sphere are U-O(ax) = 1.77 +/- 0.01 Angstroms and U-Cl = 2.68 +/- 0.01 Angstroms.     

Isomerization of trans-[Ru(PTA)4Cl2] to cis-[Ru(PTA)4Cl2] in water and organic solvent: revisiting the chemistry of [Ru(PTA)4Cl2

trans-[Ru(PTA)4Cl2] (trans-1), (PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.13,7]decane) has been isolated and structurally characterized by X-ray crystallography. The structure reveals ruthenium in a slightly distorted-octahedral environment bound to two axial chlorides and four equatorial PTA ligands. In organic solvents, trans-1 undergoes a relatively clean isomerization to cis-1. In aqueous environments, trans-1 undergoes a more complicated transformation involving isomerization, protonation, and ligand substitution affording cis-1 and a series of structurally related molecules. From these results, we conclude that the synthesis of [Ru(PTA)4Cl2] (1) affords trans-1, not cis-1, as earlier reports suggest. The water-soluble hydride cis-[Ru(PTA)4H2] (2) has also been synthesized from the reaction of trans-[Ru(PTA)4Cl2] with excess sodium formate. Compound 2 is stable in deoxygenated water and undergoes H/D exchange with D2O (t1/2 approximately equal to 120 min, at 25 degrees C). The solid-state structures of both trans-1 and 2 are described.     

The preparation and molecular structure oftrans-[MoCl2(PMe2Ph)4]

Summary The compoundtrans-[MoCl₂(PMe₂Ph)₄] has been prepared by the reduction of MoCl₅ (by Mg) or of [MoCl₃(PMe₂Ph)₃] (by LiBuⁿ) in the presence of PMe₂Ph in tetrahydrofuran (THF). It has _eff=2.84 B.M. and crystallises in space group P1 witha=11.591(3),b=12.931(3),c=12.703(3) Å, = 95.28(2), =105.97(2), =103.54(2)°. Refinement of the structure gave R=0.036. The Mo-Cl and Mo-P distances average 2.443(6) and 2.534(8) Å, respectively.Low-valent phosphine complexes of the Group VI metals continue to attract much attention because of their involvement in studies of the catalytic activation of dinitrogen⁽¹⁾, dihydrogen(^{2, 3}), alkenes and alkynes(⁴). As a by-product during our studies of dinitrogen(¹) and hydride(²) complexes of molybdenum and tungsten, we obtainedtrans-[MoCl_2- (PMe₂Ph)₄] as yellow, paramagnetic crystals (_eff= 2.84 B.M.). We first obtained the compound during the attempted synthesis ofcis-[Mo(N₂)₂(PMe₂Ph)₄] by reduction of MoCl₅ with Mg in the presence of PMe₂Ph (see Experimental). Upon identification of the compound we found that it could be readily synthesised by treatment of [MoCl₃(PMe₂Ph)₃]⁽⁵⁾ with LiBuⁿ in THF in the presence of PMe₂Ph (experimental).The complex was shown to have thetrans structure by x-ray analysis (Figure). Analogues oftrans-[MoCl₂(PMe₂Ph)₄] have been prepared, namely [CrCl₂(Me₂PCH₂CH₂PMe₂)₂]⁽⁶⁾,trans- [MoCl₂(PMe₃)₄]⁽⁷⁾, [WCl₂(PMe₂Ph)₄]⁽⁸⁾ and [WCl₂(PMe₃)₄]⁽⁴⁾, of which onlytrans-[MoCl₂(PMe₃)₄] has been examined by X-rays⁽⁷⁾. Its principal structural parametersi.e. d(Mo-Cl)= 2.420(6), d(Mo-P)_av=2.496(3) Å⁽⁶⁾ are close to those found here fortrans-[MoCl₂(PMe₂Ph)₄].     

Kinetics of the solvolysis of [Co(Rpy)4Cl4]+ with R = 4-t-Bu, 3-Me or 3-Et in mixtures of urea with water

Summary The kinetics of the solvolysis of complex ions trans-[Co(Rpy)₄Cl₂]⁺, with R = 4-t-Bu, 3-Me and 3-Et, have been investigated in mixtures formed by adding urea to water, which enhances the dielectric constant and decreases solvent structure. Differential effects of the changes in solvent structure on the initial and transition states are found to be important factors controlling changes in the rate constant with solvent composition. The variation of the enthalpy and the entropy of activation with solvent composition are contrasted with their variations found for the solvolysis of [Co(Rpy)₄Cl₂]⁺ in mixtures where solvent structure is enhanced by additions of a co-solvent to water. The application of a free energy cycle to the process of the initial state going to the transition state suggests that the Co³⁺ cation in the transition state is more stable than the Co³⁺ cation in the initial state in the water + urea mixtures.     

Thermal decomposition of [Co(NH3)5Cl]Cl2

The thermal decomposition of [Co(NH₃)₅Cl]Cl₂ was studied under non-isothermal conditions, in dynamic air and argon atmospheres. The kinetics of the particular stages of [Co(NH₃)₅Cl]Cl₂ thermal decomposition were evaluated from the dynamic weight loss data by means of the modified Coats-Redfern method. TheD _n andR _n models were selected as the models best fitting the experimental TG curves. These models suggest that the kinetics and macromechanism of [Co(NH₃)₅Cl]Cl₂ decomposition can be governed by diffusive and/or phase boundary processes. The values of the activation energy,E _a, and the pre-exponencial factor,A, of the particular stages of the thermal decomposition were calculated.     

配合物[Co(2，3-tri)2Cl]·ZnCl4·Cl·H2O和[Co(amp)3]·amph·Cl·2ZnCl4·H2O合成及晶体结构

采用三元胺及二元胺混配方法进行[Co(N)₅Cl]²⁺配合物的合成，分离出分别由三元胺配体和二胺配体构成的2个钴胺配合物。晶体结构测定表明由三元胺配体构成的钴胺配合物中，三元胺为N-(2-Aminoethyl)-1，3-propanediamine(记为2，3-tri)，但并未以六胺形式配位[Co(N)₆]³⁺，而以六胺五配位形式形成[Co(N)₆Cl]²⁺，这     

高氯酸碳酰肼钴、高氯酸碳酰肼镍快速热分解反应动力学

利用温度跃升傅立叶变换红外原位分析技术(T-jump/FTIR)对高氯酸碳酰肼钴和高氯酸碳酰肼镍的快速热分解反应进行了研究. 研究表明, 目标化合物快速热分解逸出的主要气相产物是CO2, H2O, HCN, HNCO和HONO. 借助快速升温过程中Pt金属丝的控制电压变化曲线得到剧烈放热峰的诱导出现时间tx, 利用tx值计算了两种目标化合物的快速热分解动力学参数. 在0.1 MPa氩气气氛, 613～653 K的实验温度范围内, 高氯酸碳酰肼钴的活化能Ea=39.42 kJ•mol−1, lnA=5.93; 在0.1 MPa氩气气氛, 618～678 K的实验温度范围内, 高氯酸碳酰肼镍的活化能Ea=60.44 kJ•mol−1, lnA=9.40.     

Thermal decomposition of [Co(NH3)5Cl]Cl2

Simultaneous TG-DTG-DTA studies on [Co(NH₃)₅Cl]Cl₂ under non-isothermal conditions were carried out in dynamic air and argon atmospheres in the temperature range 293–1273 K. Thermogravimetric measurements under quasi-isothermal conditions were also made. On the basis of the experimental data (weight loss, X-ray diffraction, reflectance spectroscopy and chemical analysis), the probable decomposition sequences are presented. The data indicate that the thermal decomposition of [Co(NH₃)₅Cl]Cl₂ occurs in three stages in argon and four stages in air.The changes in the morphology of crystalline [Co(NH₃)₅Cl]Cl₂ powder in the course of its thermal decomposition in air were followed by scanning electron microscopy.

---

Zusammenfassung In dynamischer Luft- und ArgonatmosphÄre wurden im Temperaturbereich 293–1273 K unter nichtisothermen Bedingungen simultane TG-DTG-DTA Untersuchungen an [Co(NH₃)₅Cl]Cl₂ durchgeführt, ebenso auch thermogravimetrische Untersuchungen unter quasi-isothermen Bedingungen. Auf der Grundlage der experimentellen Daten (Gewichtsverlust, Röntgendiffraktion, Reflexionsspektroskopie und chemische Analyse) wurde eine wahrscheinliche Zersetzungssequenz erstellt. Es zeigte sich, da\ die thermische Zersetzung in Argon in drei Schritten, in Luft dagegen in vier Schritten verlÄuftDie VerÄnderung der Morphologie kristallinen [Co(NH₃)₅Cl]Cl₂-Pulvers im Verlaufe seiner thermischen Zersetzung in Luft wurde durch Scanning-Elektronenmikroskopie verfolgt.

     

Synthesis and characterization of [Cu(mb2en)2]ClO4 and [Cu(mb2en)(PPh3)2]BPh4: crystal structure of [Cu(mb2en)2]ClO4

The ligand, N,N′-bis-(4-methoxy-benzylidene)-ethane-1,2-diamine (mb₂en), and its corresponding copper(I) complexes, [Cu(mb₂en)₂]ClO₄ (1), and [Cu(mb₂en)(PPh₃)₂]BPh₄ (2), have been synthesized and characterized by CHN analyses, ¹H and ¹³C-NMR, IR, and UV-Vis spectroscopies. The crystal and molecular structure of [Cu(mb₂en)₂]ClO₄ (1), were determined by X-ray crystallography from a single-crystal. The coordination polyhedron about copper(I) is best described as a distorted tetrahedron. Quasi-irreversible redox behavior was observed for 1 and 2 (E _1/2?=?0.55 and 0.95?V, respectively).     

Thermal decompositions of [Co(py)4Cl2]2PbCl6 and [Ru(dipy)3]PbCl6

The thermal decompositions of [Co(py)₄.Cl₂]₂PbCl₆ and [Ru(dipy)₃]PbCl₆ were examined by dynamic thermoanalytical methods and under isothermal conditions permitting quantitative determination of some of the reaction products. A comparative study of the corresponding chloride salts was also performed. Both groups of compounds decompose with the liberation of chlorine and organic ligands (and H₂O in the case of the hydrates of the chlorides), and the process is accompanied by the simultaneous transitions Pb(4 +)Pb(2 +) and Co(3 +) Co(2 +). The ruthenium complex salts initially decompose without a change in the oxidation state of the Ru atom, but upon thermal treatment of the hexachloroplumbate certain chlorination products of the organic ligands are formed.

---

Zusammenfassung Mit Hilfe dynamischer thermoanalytischer Methoden und unter die quantitative Bestimmung einiger Reaktionsprodukte ermöglichenden isothermen Bedingungen wurde die thermische Zersetzung von [Co(py)₄Cl₂]₂PbCl₆ und [Ru(dipy)₃]PbCl₆ untersucht. Eine vergleichende Betrachtung der korrespondierenden Chloride wurde ebenfalls durchgeführt. Die Zersetzung beider Verbindungsgruppen geschieht unter Freisetzung von Chlor und organischen Liganden (bei den Hydraten der Chloride auch von Wasser) und ist von den übergängen Pb(4 +) Pb(2 +) bzw. (Co(3 +) Co(2 +) begleitet. Die Komplexsalze des Rutheniums zersetzen sich anfangs ohne Änderung der Oxydationsstufe des Rutheniumatoms, es bilden sich allerdings infolge von Wärmezufuhr aus dem Hexachloroplumbat verschiedene Chlorprodukte der organischen Liganden.

---

[Co(py)₄l₂]₂PbCl₆ [Ru(dipy)₃]PbCl₆ , . . , . . , .

     

Carbonylcobalt(I) complexes. The crystal and molecular structure of [Co(CO)(dppm)2]ClO4

New anionic carbonylcobalt(I) complexes [X₂Co(CO)₂(PPh₃)](PR₄) (X=Cl, PR₄ = PBzPh₃ (I); X = Br, PR₄ = PEtPh₃ (II)) have been prepared by reduction of the cobalt(II) halides with NaBH₄ in the presence of PPh₃ and the phosphonium salt PR₄X. Cleavage of halide bridges in dimeric or polymeric [XCo(PPh₃)₂]_n and [XCo(PPh₃)]_n gives the neutral dicarbonyl derivatives XCo(CO)₂PPh₃)₂. Treatment of ClCo(CO)₂(PPh₃)₂ with alkylating agents gives the known σ- and η- organocobalt(I) derivatives, and reactions with TIClO₄ in the presence of various amounts of different mono- and bi-dentate phosphines give the cationic tricarbonyl [Co(CO)₃(PPh₃)₂]⁺, dicarbonyl [Co(CO)₂(PMePh₂)₃]⁺ and monocarbonyl [Co(CO)L₄]⁺ complexes (L₄ = 4P(OMe)₃, 2 dppe and 2dppm). The dppm complex crystallizes in the monoclinic space group P2₁/c with a 17.895(6), b 10.751(2), c 24.687(4) Å, β 98.92(1)°, and D_calc 1.35 g cm⁻³ for Z = 4. A final R value of 0.077 ( R_w = 0.061), based on 2656 observed reflections, was obtained. The cobalt atom exhibits a distorted trigonal bipyramidal geometry. The perchlorate anion is severely disordered or freely rotating.     

Structural Characterization of trans-[Cr(NH3)4(H2O)Cl]Cl2 and trans-[Cr(NH3)4Cl2]l

Trans-[Cr(NH₃)₄(H₂O)Cl]Cl₂ (A) crystallizes in the monoclinic space group P2₁/m (No. 11) with a = 6.556(1), b = 10.630(5), c = 6.729(2) Å and β = 96.15(3)°. Trans-[Cr(NH₃)₄Cl₂]I (B) has monoclinic C2/m (No. 12) space group and a = 9.877(2), b = 8.497(2), c = 6.047(2) Å and β = 108.98(2)°. Both unit cells contain two formula units. Cr? Cl, Cr? O(H₂O) and three independent Cr? N(NH₃) distances for A are 2.98(1), 2.023(2), 2.067(2), 2.086(3) and 2.064(3) °. Cr? Cl and Cr? N(NH₃) bonds in B are 2.325(1) and 2.071(2) °. All octahedral angles are close to 90 and 180°. Both structures were refined to very low R values. Water molecule from trans-[Cr(NH₃)₄(H₂O)Cl]²⁺ is hydrogen bonded to both ionic chlorides. Cation and two anions form the motive which repeats itself in the crystal. Cations and anions of the second structure are distributed in layers. Each cation and anion have coordination number eight.     

Apparent molar heat capacities and volumes of aqueous electrolytes at 25°C: Cd(ClO4)2, Ca(ClO4)2, Co(ClO4)2, Mn(ClO4)2, Ni(ClO4)2, and Zn(ClO4)2

We have used a flow calorimeter and a flow densimeter for measurements leading to apparent molar heat capacities and apparent molar volumes of aqueous solutions of Cd(ClO₄)₂, Ca(ClO₄)₂, Co(ClO₄)₂, Mn(ClO₄)₂, Ni(ClO₄)₂, and Zn(ClO₄)₂. The resulting apparent molar quantities have been extrapolated to infinite dilution to obtain the corresponding standardstate apparent and partial molar heat capacities and volumes. These latter values have been used for calculation of conventional ionic heat capacities and volumes.