A Synthetic Route to Chiral Dihydrobenzothiazines through Ring Opening of Activated Aziridines with 2‐Halothiophenols/Copper‐Powder‐Mediated C−N Cyclization

A simple protocol for the synthesis of dihydrobenzothiazines through regio‐ and stereoselective S_N2‐type ring opening of N‐tosylaziridines with sulfur nucleophiles followed by copper‐powder‐mediated intramolecular C?N cyclization in excellent yields (up to 95 %) with high diastereo‐ and enantioselectivity (up to >99 %) is reported.     

Pyridine-N-oxide:An Efficient Organocatalyst for Ring-Opening Reactions of Aziridines with Aryl Thiols

Pyridine‐N‐oxide serves as an efficient catalyst for the ring‐opening reactions of N‐tosylaziridines with various aryl thiols under mild conditions. This transformation is highly effective, which gives rise to the corresponding β‐amino sulfides in good to excellent yields.     

Cationic Micelle-catalyzed Ring-Opening Reactions of Aziridines with Thiols in Water

An efficient and practical method is described for the ring‐opening reactions of N‐tosylaziridines with various thiols in water under mild conditions. Various surfactants have been evaluated to optimize the reactions. Under optimal conditions, these reactions gave rise to the corresponding β‐amino sulfides in good to excellent yields.     

Synthesis of Chiral Vicinal Diamines by Silver(I)‐Catalyzed Enantioselective Aminolysis of N‐Tosylaziridines

The kinetic resolution of 2‐aryl‐N‐tosylaziridines and the asymmetric desymmetrization of meso ‐N‐tosylaziridines by ring openings with various primary and secondary anilines, and aliphatic amines as nucleophile have been realized by using a single silver(I)/chiral diphosphine complex as catalyst for the first time. The simple starting materials, broad scope, and easy scalability render this protocol a practical way to chiral vicinal diamine derivatives.     

Diastereo‐ and Regioselective Addition of Thioamide Dianions to Imines and Aziridines: Synthesis of N‐Thioacyl‐1,2‐diamines and N‐Thioacyl‐1,3‐diamines

Addition reactions of thioamide dianions that were derived from N‐arylmethyl thioamides to imines and aziridines were carried out. The reactions of imines gave the addition products of N‐thioacyl‐1,2‐diamines in a highly diastereoselective manner in good‐to‐excellent yields. The diastereomeric purity of these N‐thioacyl‐1,2‐diamines could be enriched by simple recrystallization. The reduction of N‐thioacyl‐1,2‐diamines with LiAlH₄ gave their corresponding 1,2‐diamines in moderate‐to‐good yields with retention of their stereochemistry. The oxidative‐desulfurization/cyclization of an N‐thioacyl‐1,2‐diamine in CuCl₂/O₂ and I₂/pyridine systems gave the cyclized product in moderate yield and the trans isomer was obtained as the sole product. On the other hand, a similar cyclization reaction with antiformin (aq. NaClO) as an oxidant gave the cis isomer as the major product. The reactions of N‐tosylaziridines gave the addition products of N‐thioacyl‐1,3‐diamines with low diastereoselectivity but high regioselectivity and in good‐to‐excellent yields. The use of AlMe₃ as an additive improved the efficiency and regioselectivity of the reaction. The stereochemistry of the obtained products was determined by X‐ray diffraction.     

Ring Opening of N‐Sulfonyl Aziridines by Amines in Silica‐Water

Ring opening reactions of N‐sulfonyl aziridines by primary and secondary amines in silica gel (SG)‐water system were achieved, which provided a mild, practical and environmentally benign method to synthesize mono‐ and bis‐sulfonyl substituted amines. When primary and secondary amines were used in excess, they reacted with N‐sulfonyl aziridines smoothly at room temperature, mainly affording 1:1 ring opening products. Reactions of primary amines with 2 equiv. of aziridines produced 2:1 ring opening products. Some 1:1 products can be cyclized with CS₂ to synthesize N‐sulfonyl cyclothioureas also in water.     

Lewis Acid Catalyzed Ring‐Opening Reactions of Sugar‐Derived Semicyclic N,O‐Acetals

N‐(Alkoxycarbonyl)‐N‐glycosides (polyoxygenated semicyclic N,O‐acetals) were efficiently synthesized from regular acetyl or methyl glycosides (glucopyranoside, ribofuranoside, arabinofuranoside, and 2‐deoxyribofuranoside) and a carbamate by treatment of trimethylsilyl trifluoromethanesulfonate and 4 Å molecular sieves. It was found that these N‐glycosides underwent Lewis acid catalyzed ring‐opening reactions with silylated nucleophiles to give ring‐opened amino alcohols with good‐to‐high diastereoselectivity. The reactivity order, 2‐deoxyribofuranoside > arabinofuranoside > ribofuranoside > glucopyranoside, was revealed. Ring‐opening reductions were also investigated with silanes or diisobutylaluminium hydride. An appropriate reducing agent was found to be dependent on the N‐glycosides used. A glycosidase inhibitor, (2S,3R,4R)‐2‐hydroxymethylpyrrolidine‐3,4‐diol ( 7 ) was synthesized by means of the reactions.     

Reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone with amines,Part 2: Influence of substituents in para‐position in the phenyl ring and a substituent on amine nitrogen atom on the reaction kinetics

An influence of a structure of the amine (benzylamine, N‐methyl‐benzylamine, N‐isopropyl‐benzylamine, N‐methyl‐butylamine, N‐ethyl‐butylamine, sec‐butylamine, and tert‐butylamine) on a rate constant of the ring‐opening reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone (Ox) was studied. The good correlation between logarithm of the rate constants and Charton's steric substituent constant ν as well as good correlation with a form of the simple branching equation indicate that there is a steric effect because of substitution at C1 carbon atom of nucleophile which decreases the reaction rate. Additionally, an influence of a structure of the benzylidene moiety of Ox on a rate of the oxazolone ring‐opening reaction was studied. The substituents (? OH, ? OCH₃, ? N(CH₃)₂, ? Cl, ? NO₂) in para‐position of the phenyl ring of Ox substantially modified the rate of the reaction with benzylamine in acetonitrile. The rate of the Ox ring‐opening reaction decreased with increase of the electron‐donating properties of the substituent. A good correlation between the rate constants of the reaction of 4‐(4′‐substituted‐benzylidene)‐2‐methyl‐5‐oxazolones with benzylamine and the electron density at the reaction center (carbon C5 of the oxazolone ring), calculated using ab initio method, and the Hammett substituent constants, and CR equation were established. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 148–155, 2002; DOI 10.1002/kin.10039     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Ring‐Opening Reactions of 3‐Aryl‐1‐benzylaziridine‐2‐carboxylates and Application to the Asymmetric Synthesis of an Amphetamine‐Type Compound

Nucleophilic ring‐opening reactions of 3‐aryl‐1‐benzylaziridine‐2‐carboxylates were examined by using O‐nucleophiles and aromatic C‐nucleophiles. The stereospecificity was found to depend on substrates and conditions used. Configuration inversion at C(3) was observed with O‐nucleophiles as a major reaction path in the ring‐opening reactions of aziridines carrying an electron‐poor aromatic moiety, whereas mixtures containing preferentially the syn‐diastereoisomer were generally obtained when electron‐rich aziridines were used (Tables 1–3). In the reactions of electron‐rich aziridines with C‐nucleophiles, S_N2 reactions yielding anti‐type products were observed (Table 4). Reductive ring‐opening reaction by catalytic hydrogenation of (+)‐trans‐(2S,3R)‐3‐(1,3‐benzodioxol‐5‐yl)aziridine‐2‐carboxylate (+)‐trans‐ 3c afforded the corresponding α‐amino acid derivative, which was smoothly transformed into (+)‐tert‐butyl [(1R)‐2‐(1,3‐benzodioxol‐5‐yl)‐1‐methylethyl]carbamate((+)‐ 14 ) with high retention of optical purity (Scheme 6).     

Catalytic,Cascade Ring‐Opening Benzannulations of 2,3‐Dihydrofuran O,O‐ and N,O‐Acetals

An Al(OTf)₃‐catalyzed intramolecular cascade ring‐opening benzannulation of 2,3‐dihydrofuran O,O‐ and N,O‐acetals is described. The cascade sequence involves the dihydrofuran ring‐opening by acetal hydrolysis, an intramolecular Prins‐type cyclization, and aromatization to generate an array of benzo‐fused (hetero)aromatic systems in up to 95 % yield. This method represents the first example of dihydrofuran acetal usage in benzannulation reactions. The approach provides excellent regiocontrol based on the choice of alkenes used to form the requisite dihydrofuran acetals.     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.     

Acceleration effect of N‐allyl group on thermally induced ring‐opening polymerization of 1,3‐benzoxazine

Thermally induced ring‐opening polymerization of monofunctional N‐allyl‐1,3‐benzoxazine 1a was compared with that of N‐(n‐propyl)‐1,3‐benzoxazine 1b to clarify an unexpected effect of allyl group to promote the polymerization, that is, in spite of the comparable bulkiness of allyl group to n‐propyl group, the polymerization of 1a was much faster than that of 1b . Such a difference in polymerization rate was also observed similarly in the comparison of thermally induced polymerization of a bifunctional N‐allyl‐benzoxazine 2a with that of a bifunctional N‐(n‐propyl) analogue 2b . These observations implied a certain contribution of an electron‐rich C? C double bond of the N‐ally group to promotion of the ring‐opening reaction of 1,3‐benzoxazine into the corresponding zwitterionic species, which would involve a mechanism to stabilize the cationic part of the zwitterionic species based on “neighboring group participation” of the C? C double bond. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Asymmetric Ring‐Opening of Cyclopropyl Ketones with Thiol,Alcohol, and Carboxylic Acid Nucleophiles Catalyzed by a Chiral N,N′‐Dioxide–Scandium(III) Complex

A highly efficient asymmetric ring‐opening reaction of cyclopropyl ketones with a broad range of thiols, alcohols and carboxylic acids has been first realized by using a chiral N,N′‐dioxide–scandium(III) complex as catalyst. The corresponding sulfides, ethers, and esters were obtained in up to 99 % yield and 95 % ee. This is also the first example of one catalytic system working for the ring‐opening reaction of donor–acceptor cyclopropanes with three different nucleophiles, let alone in an asymmetric version.     

Promoting effect of thiophenols on the ring‐opening polymerization of 1,3‐benzoxazine

Thiophenol and p‐nitrothiophenol were evaluated as promoters for the ring opening polymerization of benzoxazine. The ring‐opening polymerization of p‐cresol type monofunctional N‐phenyl benzoxazine 1a with 10 mol % of thiophenols proceeded at 150 °C, leading to the high conversion of 1a more than 95% within 5 h, whereas the polymerization of 1a without thiophenols did not proceed under the same conditions. The promotion effect of the thiophenols on curing of bisphenol‐A type N‐phenyl benzoxazine 1b was also investigated. In the differential scanning calorimetric (DSC) analysis of the polymerization of 1b at 150 °C without using any promoters, an exothermic peak attributable to the ring‐opening reaction of benzoxazine was observed after 8 h. In contrast, in the DSC analysis of the polymerization of 1b with addition 20 mol % of p‐nitrothiophenol, an exothermic peak was observed within 2 h, to clarify the significant promoting effect of p‐nitrothiophenol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2523–2527     

Ring opening of pyridines: the pseudo‐cis and pseudo‐trans isomers of tetra‐n‐butylammonium 4‐nitro‐5‐oxo‐2‐pentenenitrilate

The reaction of 2‐chloro‐5‐nitropyridine with two equivalents of base produces the title carbanion as an intermediate in a ring‐opening/ring‐closing reaction. The crystal structures of the tetra‐n‐butylammonium salts of the intermediates, C₁₆H₃₆N⁺·C₅H₃N₂O₃⁻, revealed that pseudo‐cis and pseudo‐trans isomers are possible. One crystal structure displayed a mixture of the two isomers with approximately 90% pseudo‐cis geometry and confirms the structure predicted by the S_N(ANRORC) mechanism. The pseudo‐cis intermediate undergoes a slow isomerization over a period of months to the pseudo‐trans isomer, which does not have the appropriate geometry for the subsequent ring‐closing reaction. The structure of the pure pseudo‐trans isomer is also reported. In both isomers, the negative charge is highly delocalized, but relatively small differences in C—C bond distances indicate a system of conjugated double bonds with the nitro group bearing the negative charge. The packing of the two unit cells is very similar and largely determined by the interactions between the planar carbanion and the bulky tetrahedral cation.     

δ‐Peptide Analogues of Pyranosyl‐RNA,Part 1 , Nucleo‐δ‐peptides Derived from Conformationally Constrained Nucleo‐δ‐amino Acids: Preparation of Monomers

Cyclic nucleo‐δ‐amino acids that constitute monomers of a conformationally constrained nucleo‐δ‐peptide base‐pairing system have been prepared. Their synthesis starts with an enantioselectively catalyzed chirogenic Diels‐Alder reaction, proceeds via a regioselective ε‐iodolactamization process, and ends with a regio‐ as well as diastereoselective introduction of nucleobases through S_N2‐type opening of a transiently formed N‐acylaziridine ring. Extensive use of X‐ray crystal‐structure analysis has been made to support structure assignments.     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydroxylation and Ring‐Opening Mechanism of an Unusual Flavoprotein Monooxygenase, 2‐Methyl‐3‐hydroxypyridine‐5‐carboxylic Acid Oxygenase: A Theoretical Study

Hybrid meta‐GGA density functional theory (the MPWB1K functional) was used to study the hydroxylation and ring‐opening mechanism of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid oxygenase (MHPCO). This enzyme catalyses the conversion of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid (MHPC) to α‐(N‐acetylaminomethylene)succinic acid (AAMS), which is the essential ring‐opening step in the bacterial degradation of vitamin B₆. MHPCO belongs to the flavin‐containing aromatic hydroxylases family. However, MHPCO is capable of catalysing a subsequent aromatic ring‐cleavage reaction to give acyclic products rather than hydroxylated aromatic ones. Our calculations show that the re‐aromatisation of the hydroxylated intermediate occurs spontaneously in aqueous solution; this implies that the ring‐opening process occurs inside the enzyme’s active site, in which limited water is available. The instability of the hydroxylated intermediate of MHPCO is the main reason why acyclic products are formed. Previously proposed mechanisms for the ring‐opening step were studied, and were shown to be less likely to occur (ΔΔG^≠298>35 kcal mol^?1). Two new pathways with reasonable barrier heights (ΔΔG^≠298<15 kcal mol^?1) are reported herein, which are in accordance with all experimental information present to date.     

Ligand‐Free,Cu‐ and Fe‐Catalyzed Selective Ring‐Opening Arylations of Benzoxazoles with Aryl Iodides

Cu‐ or Fe‐based catalyst systems have been reported to selectively catalyze the N,N‐diarylation or N‐monoarylation of benzoxazoles ring‐opening with aryl iodides in the absence of additional added ligand in polyethylene glycol under an inert atmosphere. Two types of coupling products (triphenylamines and diphenylamines) have been examined and the reaction routes can be simply controlled by changing the metal salts (Cu or Fe) as catalyst. A range of substrates have been investigated for the diverse reactions, and the corresponding arylation products were achieved in good to high yields. This selective, low‐cost, and environmentally friendly protocol displays great potential for replacing existing methodologies as well as extending the synthetic applications of benzoxazoles.