Kinetic characterization of a transient reaction by degeneration of the precursor mechanism: Application to the synthesis of 3,4‐diazabicyclo[4.3.0]‐ non‐2‐ene

The rate of the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine has been studied by GC and HPLC between pH 10.5 and 13.5. The second‐order reaction exhibits specific acid catalysis. The formation of N,N′‐azo‐3‐azabicyclo[3.3.0]octane or 3,4‐diazabicyclo[4.3.0]non‐2‐ene is pH, concentration, and temperature dependent. In alkaline media, the exclusive formation of 3,4‐diazabicyclo[4.3.0]non‐2‐ene is observed. Kinetic studies show that the oxidation of N‐amino‐3‐azabicyclo[3.3.0]octane by chloramine is a multistep process with the initial formation of a diazene‐type intermediate, which is converted by hydroxide ions into 3,4‐diazabicyclo[4.3.0]non‐2‐ene. Because it was not possible to follow the rate of change of the intermediate concentration, to determine the kinetics of 3,4‐diazabicyclo[4.3.0]non‐2‐ene formation, a procedure based on the degeneration of the precursor process was adopted. An appropriate mathematical treatment allowed a quantitative interpretation of all the phenomena observed over the given pH interval. The activation parameters were determined. © 2006 Wiley Periodicals, Inc. Int J Chem Kinet 38: 327–338, 2006     

Catalyst‐ and solvent‐free synthesis of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide through a microwave‐assisted Fries rearrangement: X‐ray structural and theoretical studies

An efficient approach for the regioselective synthesis of (5‐amino‐3‐methylsulfanyl‐1H‐1,2,4‐triazol‐1‐yl)(2‐fluorophenyl)methanone, C₁₀H₉FN₄OS, (3), from the N‐acylation of 3‐amino‐5‐methylsulfanyl‐1H‐1,2,4‐triazole, (1), with 2‐fluorobenzoyl chloride has been developed. Heterocyclic amide (3) was used successfully as a strategic intermediate for the preparation of 2‐fluoro‐N‐(3‐methylsulfanyl‐1H‐1,2,4‐triazol‐5‐yl)benzamide, C₁₀H₉FN₄OS, (4), through a microwave‐assisted Fries rearrangement under catalyst‐ and solvent‐free conditions. Theoretical studies of the prototropy process of (1) and the Fries rearrangement of (3) to provide (4), involving the formation of an intimate ion pair as the key step, were carried out by density functional theory (DFT) calculations. The crystallographic analysis of the intermolecular interactions and the energy frameworks based on the effects of the different molecular conformations of (3) and (4) are described.     

Formation of linear and cyclic polyoxetanes in the cationic ring‐opening polymerization of 3‐allyloxymethyl‐3‐ethyloxetane and subsequent postpolymerization modification of poly(3‐allyloxymethyl‐3‐ethyloxetane)

The synthesis of 3‐allyloxymethyl‐3‐ethyloxetane (AllylEHO) and its polymerization with BF₃ × Et₂O is described in this study. Size exclusion chromatography (SEC) and membrane osmometry are used for the determination of molecular weights of the obtained products, ranging from M_n,SEC = 41,500‐131,500 g/mol. ¹H NMR spectroscopy, SEC, as well as MALDI‐TOF MS reveal the formation of cyclic tetramer beside low, but detectable concentrations of larger cyclic oligomers as by‐products during the polymerization process. These results help to understand mechanistically why attempts for a controlled homopolymerization of AllylEHO fail and why a controlled homopolymerization of oxetanes has not been described so far in the literature. Additionally, the high versatility of allyl‐functional polyoxetane for postpolymerization modification is proven by thiol–ene reactions with 3‐mercaptopropionic acid and N‐acetyl‐L ‐cysteine methyl ester. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

One‐Pot Synthesis of 4‐Aryl‐NH‐1,2,3‐Triazoles through Three‐Component Reaction of Aldehydes,Nitroalkanes and NaN3

A one‐pot three‐component reaction of aldehydes, nitroalkanes and NaN₃ for the synthesis of NH ‐1,2,3‐triazoles has been developed. The reaction provides a safe, efficient and step‐economic approach for the synthesis of various NH ‐1,2,3‐triazoles in good to excellent yields.     

Reverse‐Vesicle Formation of Organic–Inorganic Polyoxometalate‐Containing Hybrid Surfactants with Tunable Sizes

The formation of reverse‐vesicular structures of the polyoxometalate‐containing hybrid surfactants [nBu₄N]₃[MnMo₆O₁₈{(OCH₂)₃? CNHCO(CH₂)_n?2CH₃}₂] (Mn‐Anderson‐C_n, n=6, 16) in nonpolar medium was achieved by titrating toluene into Mn‐Anderson‐C_n/acetonitrile (MeCN) solution. Stepwise change of the solvent polarity induces self‐association of the hydrophilic Mn‐Anderson cluster on the hybrid amphiphiles. The reverse‐vesicle formation was characterized by laser light scattering and further confirmed by transmission electron microscopy techniques, and the vesicle sizes increase with increasing toluene contents. The assembly process was accelerated at an elevated temperature. The length of the alkyl tails on the hybrid surfactants has a minor effect on the vesicle sizes, because the strong attraction between the polyoxometalate clusters is more dominant in the reverse‐vesicle formation.     

Synthesis of Novel 3‐Aryl‐5‐dichloromethyl‐Δ2‐1,2,4‐oxadiazolines

The first synthetic approach to hitherto unknown 3‐aryl‐5‐dichloromethyl‐Δ²‐1,2,4‐oxadiazolines, of synthetic and biological interest, has been developed involving high‐yield reactions between N‐(2,2‐dichlorovinyl)benzimidoyl chlorides and hydroxylamine. The molecular structure of one member of this new family of compounds—5‐dichloromethyl‐3‐(4‐fluorophenyl)‐1,2,4‐oxadiazoline—has been determined by X‐ray crystallography. Density functional theory calculations supporting the proposed reaction pathway for the formation of these products have been carried out.     

Synthesis and characterization of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐poly(acrylonitrile) via single electron transfer–living radical polymerization process

Preparation of functional fluoromaterials through chemical modification of traditional fluoropolymers has been recognized as an economic and convenient strategy to expand the application areas of fluoropolymers. Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐polyacrylonitrile (P(VDF‐co‐CTFE)‐g‐PAN) has been successfully synthesized via single electron transfer–living radical polymerization (SET–LRP) process initiated with macroinitiator P(VDF‐co‐CTFE) in the presence of trace amount of Cu(0)/tris(2(dimethylamino)ethyl)amine (Me₆‐TREN) in dimethyl sulfoxide (DMSO) at ambient temperature. The typical side reactions happened on P(VDF‐co‐CTFE) induced by the nitrogen‐containing solvents and high reaction temperature in atom transfer radical polymerization process could be avoided in SET–LRP process by using the mild reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including the different reaction temperature, catalyst concentration, as well as monomer amount in feed. An induction period of 0.5–1.0 h in the polymerization procedure was observed at low temperature, which may be attributed to the Cu₂O from the surface of the Cu(0) powder. When Cu(0) catalyst is activated, the introduction period is eliminated. The polymerization rates were decelerated by adding excessive Me₆‐TREN for the formation of more stable CuCl₂/(Me₆‐TREN)₂. The structure of P(VDF‐co‐CTFE)‐g‐PAN was demonstrated by FTIR, NMR, DSC, and TGA. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An Efficient One‐pot Three‐component Method for the Synthesis of 5‐Amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles

A facile, convenient, and adequate method has been developed for the synthesis of novel 5‐amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles ( 6 ) by employing 2‐(4‐(2‐oxo‐2H‐chromen‐3‐yl)thiazol‐2‐yl)acetonitrile ( 3 ) as an important precursor. Initially, we have synthesized the target compounds in a stepwise manner and then approached a tandem method to examine the feasibility of one‐pot method. Subsequently, one‐pot three‐component protocol has been established for the synthesis of title compounds by the reaction of 3 with benzaldehyde and malononitrile in refluxing ethanol engender a new six‐membered thiazolo[3,2‐a] pyridine as a hybrid scaffold. Reaction conditions were optimized for this reaction and a broad substrate scope with various aryl and heteroaryl aldehydes make this protocol very practical, attractive, and worthy. Mechanistic aspects for the formation of these compounds were outlined comprehensively. Characterization of these newly synthesized compounds was achieved by means of IR, ¹H NMR, ¹³C NMR, and HRMS.     

One‐Pot Synthesis of 3‐Acetyl‐2‐aryl‐3,4‐dihydroquinazolines from N‐[2‐(Azidomethyl)phenyl]benzamides Utilizing Intramolecular Aza‐Wittig Reaction

A new and convenient method for the preparation of 3,4‐dihydroquinazolines 5 with aryl and Ac groups at C(2) and N(3), respectively, has been developed. The key sequence is the formation of aza‐phosphorane intermediates by the reaction of N‐[2‐(azidomethyl)phenyl]benzamides 1 with Ph₃P, followed by intramolecular aza‐Wittig reaction and 3‐acetylation, which can be conducted in one‐pot.     

Mechanism of the Reaction of Amines with 5‐[(Aryl‐ or Alkylamino)hydroxymethylene]‐2,2‐dimethyl‐1,3‐dioxane‐4,6‐diones in the Presence of Chlorotrimethylsilane (Me3SiCl)

Addition of chlorotrimethylsilane (Me₃SiCl) to the mixture of a carbamoyl‐substituted Meldrum's acid, i.e., a 5‐[(arylamino)hydroxymethylene]‐2,2‐dimethyl‐1,3‐dioxane‐4,6‐dione of type 1 and a secondary amine as nucleophile strongly accelerated the rate of their reaction. The reason for this phenomenon observed, during our previous research, remained, however, unclear. To elucidate the mechanism of this reaction, we assumed and verified three possible pathways for the action of Me₃SiCl (cf. Scheme 2): The acceleration of the reaction is caused i) by formation of a O‐trimethylsilylated Meldrum's acid of type 2 , ii) by the silylated amine 3 , or iii) by the presence of HCl liberated from Me₃SiCl. The performed experiments revealed that the faster course of reaction is caused by the formation of N‐trimethylsilylated amines of type 3 .     

Pd/C‐Catalyzed Cyclizative Cross‐Coupling of Two ortho‐Alkynylanilines under Aerobic Conditions: Synthesis of 2,3′‐Bisindoles

A palladium‐catalyzed cyclizative cross‐coupling of two o‐alkynylanilines to 2,3′‐bisindoles under aerobic oxidative conditions was developed. Mechanistic studies suggested that the two catalytic cycles, namely the formation of 3‐alkynylindoles 8 and their subsequent cyclization to bisindoles 5 , are temporally separated. The aminopalladation of 3‐alkynylindoles 8 occurred only after all the N,N‐dialkyl‐o‐alkynylanilines were consumed. The solid support (activated charcoal) played a crucial role in the second intramolecular aminopalladation process.     

Visible‐Light‐Mediated Generation of Nitrogen‐Centered Radicals: Metal‐Free Hydroimination and Iminohydroxylation Cyclization Reactions

The formation and use of iminyl radicals in novel and divergent hydroimination and iminohydroxylation cyclization reactions has been accomplished through the design of a new class of reactive O‐aryl oximes. Owing to their low reduction potentials, the inexpensive organic dye eosin Y could be used as the photocatalyst of the organocatalytic hydroimination reaction. Furthermore, reaction conditions for a unique iminohydroxylation were identified; visible‐light‐mediated electron transfer from novel electron donor–acceptor complexes of the oximes and Et₃N was proposed as a key step of this process.     

A Simple and Facile Synthesis of 4‐Phenylquinoline‐fused Pyrrolidin‐2‐ones

In the present investigation, a simple and facile synthesis of a series of 4‐phenylquinoline‐fused pyrrolidin‐2‐ones, namely, 9‐phenyl‐2‐substituted‐2,3‐dihydro‐1H‐pyrrolo[3,4‐b]quinolin‐1‐ones is described, involving the tandem intermolecular C‐N bond formation reaction between readily available ethyl 2‐(chloromethyl)‐4‐phenylquinoline‐3‐carboxylate and various amines followed by in situ intramolecular C–N bond cyclization process in the presence of EtOH‐AcOH (v/v, 10:1) solvent system as the reaction medium.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Gold‐Catalyzed Cycloisomerization of 1,6,8‐Dienyne Carbonates and Esters to cis‐Cyclohepta‐4,8‐diene‐Fused Pyrrolidines

A synthetic approach that provides access to cis‐cyclohepta‐4,8‐diene‐fused pyrrolidines efficiently through Au^I‐catalyzed cycloisomerization of 1,6,8‐dienyne carbonates and esters at a low catalyst loading of 2 mol % is reported. Starting carbonates and esters with a pendant alkyl group on the terminal alkenyl carbon center were found to favor tandem 1,2‐acyloxy migration/cyclopropanation followed by Cope rearrangement of the resulting cis‐3‐azabicyclo[3.1.0]hexane intermediate. On the other hand, substrates containing a terminal diene or starting materials in which the distal alkene moiety bears a phenyl substituent were observed to undergo competitive but reversible 1,3‐acyloxy migration prior to the nitrogen‐containing bicyclic ring formation. The delineated reaction mechanism also provides experimental evidence for the reversible interconversion between the oft‐proposed organogold intermediates obtained in this step of the tandem process.     

NMR Spectroscopic Study of the Self‐Aggregation of 3‐Hexen‐1,5‐diyne Derivatives

The self‐assembly of polycatenar molecules derived from 1,6‐diphenyl‐3,4‐dipropyl‐3‐hexen‐1,5‐diyne has been studied in detail by solution NMR spectroscopy. The analysis of the concentration‐ and temperature‐dependent evolution of the chemical shifts and the diffusion coefficients in [D₁₂]cyclohexane agrees well with an isodesmic model of association in this solvent. The association constants for the stacking and entropy and enthalpy of the process have been obtained. The driving force for the aggregation process is provided by a negative enthalpy (ΔH), which is partially compensated by a negative entropy (ΔS). A structural study of the self‐assembly in solution has been carried out with the help of NOESY NMR spectroscopic experiments.     

Mechanistic Insights into Substituent Effects on Reactivity of 2‐(Methoxymethyl)benzene‐1,4‐diamine

In the series of benzene‐1,4‐diamines (p‐phenylenediamines) investigated, 2‐(methoxymethyl)benzene‐1,4‐diamine (2‐methoxymethyl‐p‐phenylenediamine) is the most slowly oxidized, with removal of the first electron being rate determining. This electron‐withdrawing methoxymethyl group also drove a faster coupling step with 3‐aminophenol (m‐aminophenol) than for the analogs with electron‐donating groups. However, the series parent, benzene‐1,4‐diamine, exhibited the fastest coupling step. Since both N(1) and N(4) of the primary intermediates react with m‐aminophenol, it seems that steric hindrance by the 2‐substituents slows the overall rate. When 3‐amino‐2,6‐dimethylphenol is the coupler, the kinetics are biphasic. Nonproductive adducts are formed reversibly with all the primary intermediates by ipso attack at C(6). For 2‐(methoxymethyl)benzene‐1,4‐diamine, formation of this nonproductive adduct is favored more than for the other compounds in the series, in what seems to be a kinetically rather than thermodynamically controlled process. This slows the overall rate of color formation.     

One‐pot Regioselective Synthesis of Novel 1‐N‐Methyl‐spiro[2,3′]oxindole‐spiro[3,3″]‐1″‐N‐arylpyrrolidine‐2″,5″‐dione‐4‐arylpyrrolidines through Multicomponent 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylide

An atom economic and facile synthesis of novel dispiro–oxindole–pyrrolidines has been achieved via a three‐component tandem cycloaddition of azomethine ylide generated in situ from isatin and sarcosine by decarboxylative condensation with N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐dione derivatives as dipolarophiles. The salient features of synthetic procedure are characterized by the mild reaction conditions, high yields, high regioselectivity and stereoselectivity, one‐pot procedure, and operational simplicity. This regioselectivity was assumed to be under the influence of π–π stacking interactions between the aromatic rings of azomethine ylide and N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐diones that further control the exo–endo selectivity of the reaction 1,3‐dipolar cycloaddition. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data.     

Formation of alkane‐phosphonic acid self‐assembled monolayers on alumina: an in situ SPR study

The formation process of n‐alkane phosphonic acid CH₃ (CH₂)_n?1 PO(OH)₂ (n = 10,12,14,18) self‐assembled monolayers (SAMs), deposited from ethanol solutions on aluminum oxide, has been monitored in situ using surface plasmon resonance (SPR) spectroscopy. In addition, the two‐solvent approach is used to obtain both film thickness and refractive index of the fully formed adsorbed layers. A densely packed adsorbed layer is formed only for the longest molecules with n = 18. The chain length and solution concentration dependence of formation kinetics are studied, and the existence of two distinct kinetic steps is revealed. Fittings of the experimental results with various kinetic models are performed. Our analysis suggests that during the first kinetic step, a transition from a lying‐down to a standing‐up phase takes place, and the growth of this standing‐up phase is governed by second‐order kinetics. The second slow kinetic step is described by a modified first‐order Langmuir law. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Antimicrobial Activity of 2‐(Pyridine‐3‐yl)‐4H‐chromen‐4‐one Derivatives

An efficiently synthesis of chromones via cyclodehydration of corresponding 1‐(2‐hydroxyphenyl)‐3‐(pyridine‐3‐yl)propane‐1,3‐dione is described under ultrasound irradiation. A series of novel 2‐(pyridine‐3‐yl)‐4H‐chromen‐4‐one derivatives was confirmed on the basis of ¹H‐NMR, mass, IR spectral data, and elemental analysis. The synthesized compounds were evaluated for their antibacterial and antifungal activities. Most of the compounds were found to be comparable potent than the reference standard drugs. Utilization of ultrasound irradiation, simple reaction conditions, isolation, and purification makes this manipulation very interesting from an economic and environmental perspective.