7‐Amino‐1‐(2‐deoxy‐β‐erythro‐pentofuranosyl)‐1H‐1,2,3‐triazolo[4,5‐d]pyrimidine: an 8‐azaadenine nucleoside with the nucleobase in a syn conformation

The title compound, C₉H₁₂N₆O₃, shows a syn‐glycosylic bond orientation [χ = 64.17 (16)°]. The 2′‐deoxyfuranosyl moiety exhibits an unusual C1′‐exo–O4′‐endo (₁T⁰; S‐type) sugar pucker, with P = 111.5 (1)° and τ_m = 40.3 (1)°. The conformation at the exocyclic C4′—C5′ bond is +sc (gauche), with γ = 64.4 (1)°. The two‐dimensional hydrogen‐bonded network is built from intermolecular N—H...O and O—H...N hydrogen bonds. An intramolecular bifurcated hydrogen bond, with an amino N—H group as hydrogen‐bond donor and the ring and hydroxymethyl O atoms of the sugar moiety as acceptors, constrains the overall conformation of the nucleoside.     

5‐Fluoro‐1‐octanoyl­uracil

The crystal structure of 5‐fluoro‐1‐octanoyl­uracil [5‐fluoro‐1‐octanoyl­pyrimidine‐2,4(1H,3H)‐dione, C₁₂H₁₇FN₂O₃], a lipophilic prodrug of 5‐fluoro­uracil, is described. The 5‐fluoro­pyrimidine‐2,4(1H,3H)‐dione moiety is similar to the known structure of 1‐acetyl‐5‐fluoro­uracil. The 1‐octanoyl group and the 5‐fluoro­uracil moiety are essentially coplanar, with the octanoyl carbonyl group oriented towards the the ring C—H group and away from the nearer ring carbonyl group. The torsion angle C—N—C—O (from the ring CH group to the octanoyl carbonyl group) of 9.2 (2)° is similar to the corresponding torsion angles reported for 1‐acetyl‐5‐fluoro­uracil (17.3 and 1.6°) and 1,3‐di­acetyl‐5‐fluoro­uracil (8.8°).     

1,N6‐Etheno‐2′‐deoxytubercidin hemihydrate

The title compound [systematic name: 7‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐7H‐imidazo[1,2‐c]pyrrolo[2,3‐d]pyrimidine hemihydrate], 2C₁₃H₁₄N₄O₃·H₂O or (I)·0.5H₂O, shows two similar conformations in the asymmetric unit. These two conformers are connected through one water molecule by hydrogen bonds. The N‐glycosylic bonds of both conformers show an almost identical anti conformation with χ = −107.7 (2)° for conformer (I‐1) and −107.0 (2)° for conformer (I‐2). The sugar moiety adopts an unusual N‐type (C3′‐endo) sugar pucker for 2′‐deoxyribonucleosides, with P = 36.8 (2)° and τ_m = 40.6 (1)° for conformer (I‐1), and P = 34.5 (2)° and τ_m = 41.4 (1)° for conformer (I‐2). Both conformers and the solvent molecule participate in the formation of a three‐dimensional pattern with a `chain'‐like arrangement of the conformers. The structure is stabilized by intermolecular O—H...O and O—H...N hydrogen bonds, together with weak C—H...O contacts.     

Synthesis and characterization of novel soluble triphenylamine‐containing aromatic polyamides based on N,N′‐bis(4‐aminophenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine, N, N′‐bis(4‐aminophenyl)‐N, N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluoronitrobenzene, followed by catalytic reduction. A series of novel aromatic polyamides with triphenylamine units were prepared from the diamine and various aromatic dicarboxylic acids or their diacid chlorides via the direct phosphorylation polycondensation or low‐temperature solution polycondensation. All the polyamides were amorphous and readily soluble in many organic solvents such as N, N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with relatively high glass‐transition temperatures (257–287 °C), 10% weight‐loss temperatures in excess of 550 °C, and char yields at 800 °C in nitrogen higher than 72%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2810–2818, 2002     

Metallation reactions. XXXIV. Synthesis of 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives

The reaction of benzoxathiole‐3‐oxide with lithiumdiisopropylamide in tetrahydrofuran gave an anion, which was reacted with various aryl‐methyl‐ketones to give 2‐(1‐hydroxy‐1‐arylethyl)‐1,3‐benzoxathiol‐3‐oxide derivatives. The reaction was carried out in different temperature conditions: at ‐88 °C the trans addition stereoisomers to the sulfoxide oxygen atom were the main products.     

Synthesis of 6‐Aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles by the Cu‐Catalyzed Reaction of 2‐(2‐Bromophenyl)‐1H‐indoles with CH2(CN)2

A series of 6‐aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles 4 have been prepared by treatment of 2‐(2‐bromophenyl)‐1H‐indoles 1 , available from 1‐(2‐bromophenyl)ethanones or 1‐(2‐bromophenyl)propan‐1‐ones by using Fischer indole synthesis, with propanedinitrile in the presence of a catalytic amount of CuBr and an excess of K₂CO₃ in DMSO at 100°.     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Alkylative Carbocyclization of ω‐Iodoalkynyl Tosylates with Alkynyllithium Compounds Through a Carbenoid‐Chain Process Leading to (1‐Iodoprop‐2‐ynylidene)tetrahydrofurans and ‐cyclopropanes

Alkylative carbocyclization reactions of ω‐iodoalkynyl tosylates with alkynyllithium compounds to give products with incorporated iodine atoms are described. Slow addition of 2‐(3‐iodoprop‐2‐ynyloxy)ethyl tosylates to 1‐alkynyllithium compounds in tetrahydrofuran at 40 °C followed by additional stirring at this temperature gives (Z)‐3‐(1‐iodoprop‐2‐ynylidene)tetrahydrofurans stereoselectively in good to moderate yields. Under similar conditions at 0 °C, 4‐iodobut‐1‐ynyl tosylates react with 1‐alkynyllithium compounds to give (1‐iodoprop‐2‐ynylidene)cyclopropanes. The carbocyclization reactions are proposed to proceed through a new carbenoid‐chain process involving the exo cyclization of a lithium acetylide intermediate and the vinylic substitution of the resulting TsO,Li‐cycloalkylidenecarbenoids (Ts=tosyl) by 1‐alkynyllithium compounds.     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of 1‐silacyclopent‐2‐ene derivatives using 1,2‐hydroboration, 1,1‐organoboration and protodeborylation

The reaction of di(alkyn‐1‐yl)vinylsilanes R¹(H₂C═CH)Si(C≡C―R)₂ (R¹ = Me ( 1 ), Ph ( 2 ); R = Bu (a), Ph (b), Me₂HSi (c)) at 25°C with 1 equiv. of 9‐borabicyclo[3.3.1]nonane (9‐BBN) affords 1‐silacyclopent‐2‐ene derivatives ( 3a , 3b , 3c , 4a , 4b ), bearing one Si―C≡C―R function readily available for further transformations. These compounds are formed by consecutive 1,2‐hydroboration followed by intramolecular 1,1‐carboboration. Treated with a further equivalent of 9‐BBN in benzene they are converted at relatively high temperature (80–100°C) into 1‐alkenyl‐1‐silacyclopent‐2‐ene derivatives ( 5a , 5b 6a , 6b ) as a result of 1,2‐hydroboration of the Si―C≡C―R function. Protodeborylation of the 9‐BBN‐substituted 1‐silacyclopent‐2‐ene derivatives 3 , 4 , 5 , 6 , using acetic acid in excess, proceeds smoothly to give the novel 1‐silacyclopent‐2‐ene ( 7 , 8 , 9 , 10 ). The solution‐state structural assignment of all new compounds, i.e. di(alkyn‐1‐yl)vinylsilanes and 1‐silacyclopent‐2‐ene derivatives, was carried out using multinuclear magnetic resonance techniques (¹H, ¹³C, ¹¹B, ²⁹Si NMR). The gas phase structures of some examples were calculated and optimized by density functional theory methods (B3LYP/6‐311+G/(d,p) level of theory), and ²⁹Si NMR parameters were calculated (chemical shifts δ²⁹Si and coupling constants ⁿJ(²⁹Si,¹³C)). Copyright © 2014 John Wiley & Sons, Ltd.     

Ferrocene compounds: methyl 1′‐aminoferrocene‐1‐carboxylate

The title compund, [Fe(C₅H₆N)(C₇H₇O₂)], features one strong intermolecular hydrogen bond of the type N—H...O=C [N...O = 3.028 (2) Å] between the amine group and the carbonyl group of a neighbouring molecule, and vice versa, to form a centrosymmetric dimer. Furthermore, the carbonyl group acts as a double H‐atom acceptor in the formation of a second, weaker, hydrogen bond of the type C—H...O=C [C...O = 3.283 (2) Å] with the methyl group of the ester group of a second neighbouring molecule at (x, −y − , z − ). The methyl group also acts as a weak hydrogen‐bond donor, symmetry‐related to the latter described C—H...O=C interaction, to a third molecule at (x, −y − , z + ) to form a two‐dimensional network. The cyclopentadienyl rings of the ferrocene unit are parallel to each other within 0.33 (3)° and show an almost eclipsed 1,1′‐conformation, with a relative twist angle of 9.32 (12)°. The ester group is twisted slightly [11.33 (8)°] relative to the cylopentadienyl plane due to the above‐mentioned intermolecular hydrogen bonds of the carbonyl group. The N atom shows pyramidal coordination geometry, with the sum of the X—N—Y angles being 340 (3)°.     

Green and rapid preparation of thermally stable and highly organosoluble polyamides containing L‐phenylalanine‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido moieties

A chiral diacid monomer containing L ‐phenylalanine‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido unit was successfully synthesized in four steps and used in the preparation of a series of novel optically active polyamides by direct polycondensation with diverse aromatic diamines using 1,3‐dipropylimidazolium bromide under microwave dielectric heating. Ionic liquids (ILs) efficiently absorb microwave energy and thus are employed as solvent. By controlling the concentration of 1,3‐dipropylimidazolium bromide, reaction time and power level, high yield and moderate inherent viscosity polymers could be achieved in a very short period of time. All the resulting polymers exhibited excellent solubility in various organic solvents. The polyamides were found to have inherent viscosities in the range of 0.54–0.85 dL g^?1. These polyamides had glass‐transition temperatures (T_g) above 180°C, and a 10% weight‐loss temperatures in excess of 340°C with char yield at 800°C in nitrogen higher than 40%. A comparative study on effects exerted by microwave technique with conventional method is also presented. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of new soluble triphenylamine‐based aromatic poly(amine amide)s derived from N,N′‐bis(4‐carboxyphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic dicarboxylic acid, N,N′‐bis(4‐carboxyphenyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was synthesized by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 4‐fluorobenzonitrile, followed by the alkaline hydrolysis of the intermediate dinitrile compound. A series of novel triphenylamine‐based aromatic poly(amine amide)s with inherent viscosities of 0.50–1.02 dL/g were prepared from the diacid and various aromatic diamines by direct phosphorylation polycondensation. All the poly(amine amide)s were amorphous in nature, as evidenced by X‐ray diffractograms. Most of the poly(amine amide)s were quite soluble in a variety of organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They had useful levels of thermal stability associated with glass‐transition temperatures up to 280 °C, 10% weight‐loss temperatures in excess of 575 °C, and char yields at 800 °C in nitrogen higher than 60%. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 94–105, 2003     

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil,a cyclouridine nucleoside with a C4′‐endo furanosyl conformation

2,2′‐Anhydro‐1‐(3′,5′‐di‐O‐acetyl‐β‐D‐arabinofuranosyl)uracil, C₁₃H₁₄N₂O₇, was obtained by refluxing 2′,3′‐O‐(methoxymethylene)uridine in acetic anhydride. The structure exhibits a nearly perfect C4′‐endo (⁴E) conformation. The best four‐atom plane of the five‐membered furanose ring is O—C—C—C, involving the C atoms of the fused five‐membered oxazolidine ring, and the torsion angle is only −0.4 (2)°. The oxazolidine ring is essentially coplanar with the six‐membered uracil ring [r.m.s. deviation = 0.012 (5) Å and dihedral angle = −3.2 (3)°]. The conformation at the exocyclic C—C bond is gauche–trans which is stabilized by various C—H...π and C—O...π interactions.     

Kinetics of hexene‐1 polymerization using [(N,N′‐diisopropylbenzene)‐2,3‐(1,8‐napthyl)‐1,4‐diazabutadiene] dibromonickel/methylaluminoxane catalyst system

Kinetics of hexene‐1 polymerization was investigated using [(N,N′‐diisopropylbenzene)2,3‐(1,8‐napthly)‐1,4‐diazabutadiene]dibromonickel/methylaluminoxane catalyst. Experiments were performed at varying catalyst and monomer concentrations in the temperature range of ?10 to 35 °C. First order time‐conversion plot shows a downward curvature at temperatures of 20 °C and 35 °C indicating the presence of finite termination reactions. A nonlinear plot of degree of polymerization (P_n) with respect to conversion indicates occurrence of transfer reactions and slow initiation. The experimental molar masses are higher than predicted, which implies that a fraction of catalyst species could not be activated or is deactivated at the early stages of the reactions. The efficiency of the catalyst (Cat_eff) varies from 0.77 to 0.89. The observed polydispersity of the poly(hexene‐1) s is in the range of 1.18–1.48. The reaction order was found to be 1.11 with respect to catalyst. The Arrhenius plot obtained using the overall propagation rate constant, k_p, at five different temperatures (?10, 0, 10, 20, and 35 °C) was found to be linear with an activation energy, E_a = 4.3 kcal/mol. Based on the results presented it is concluded that the polymerization of hexene‐1 under the above‐mentioned conditions shows significant deviation from ideal “living” behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1093–1100, 2007     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Microwave‐enhanced rapid synthesis of organosoluble polyamides based on 5‐(3‐acetoxynaphthoylamino)‐isophthalic acid

A series of photoactive polyamides (PAs) containing acetoxynaphthalamide side chain with inherent viscosities of 0.27–0.56 dl g^?1 were prepared by the direct polycondensation reaction of the 5‐(3‐acetoxynaphthoylamino)isophthalic acid with various commercially available diamines by means of triphenyl phosphite (TPP) and pyridine (Py) in the presence of calcium chloride and N‐methyl‐2‐pyrrolidone (NMP) under microwave irradiation and conventional heating conditions. Most of the resulting PAs are soluble in strong polar solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide, and NMP. Thermo‐gravimetric analysis (TGA) showed that polymers are thermally stable, 10% weight loss temperatures in excess of 320 and 378°C, and char yields at 600°C in nitrogen higher than 60%. These macromolecules exhibited maximum UV‐Vis absorption at 265 and 300 nm in a DMF solution. Their photoluminescence in the DMF solution demonstrated fluorescence emission maxima around 361 and 427 nm for all of the PAs. Copyright © 2008 John Wiley & Sons, Ltd.     

Regiodirected Synthesis and Stereochemistry of 2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes and α,ω‐Bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes

2,4,8‐Trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been obtained by the regioselective and stereoselective cyclocondensation of 1,2‐ethanediamine with aldehydes RCHO (R═Me, Et, Prⁿ, Buⁿ, Pentⁿ) and H₂S at molar ratio 1:3:2 at 0°C. The increase in molar ratio of thiomethylation mixture RCHO–H₂S (6:4) at 40°C resulted in selective formation of bis‐(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)ethanes. Cyclothiomethylation of aliphatic α,ω‐diamines with aldehydes RCHO (R═Me, Et) and H₂S at molar ratio 1:6:4 and at 40°С led to α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes. Stereochemistry of 2,4,8‐trialkyl‐3‐thia‐1,5‐diazabicyclo[3.2.1]octanes have been determined by means of ¹H and ¹³С NMR spectroscopy and further supported by DFT calculations at the B3LYP/6‐31G(d,p) level. The structure of α,ω‐bis(2,4,6‐trialkyl‐1,3,5‐dithiazinane‐5‐yl)alkanes was confirmed by single‐crystal X‐ray diffraction study.     

Polymorphism vs. Desmotropy: The Cases of 3‐Phenyl‐ and 5‐Phenyl‐ 1H‐pyrazoles and 3‐Phenyl‐1H‐indazole

Two desmotropes, 3‐phenyl‐1H‐pyrazole ( 1a ) and 5‐phenyl‐1H‐pyrazole ( 1b ) have been isolated and the conditions for their interconversion established. The X‐ray structure of 1b has been determined (a=10.862(1), b=5.7620(5), c=12.927(2) Å, β=111.435(2)°, space group P2₁/c), and both tautomers 1a and 1b were characterized by NMR in the solid state (¹³C‐ and ¹⁵N‐CPMAS). In the case of 3‐phenyl‐1H‐indazole ( 2a ), two concomitant polymorphs have been analyzed by X‐ray crystallography, and their NMR spectral properties were determined. The low‐melting‐point polymorph, at 106.7°, contains three molecules in the asymmetric unit (a=41.086(1), b=7.3860(2), c=23.391(1) Å, β=117.697(1)°, space group C2/c) and the high‐melting‐point one, 115.3°, six molecules (a=13.7818(4), b=13.7976(5), c=18.9445(5) Å, α=94.300(3), β=95.131(3), γ=119.428(3)°, space group P‐1). Here, too, it has been experimentally determined how to transform one form into the other. Density‐functional‐theory calculations at the B3LYP/6‐31G** level have been performed in both examples to rationalize the stability of the different tautomers.     

CuI/amino acid‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with terminal alkynes leading to (3Z)‐3‐alkylidenepyrrol‐1‐ones

β‐Bromo‐α,β‐unsaturated amides are coupled and cyclized with terminal alkynes in DMF at 110 °C in the presence of a catalytic amount of CuI and amino acid along with a base to give the corresponding (3Z)‐3‐alkylidenepyrrol‐1‐ones in moderate to good yields. Copyright © 2013 John Wiley & Sons, Ltd.