Combustion Derived Nanocrystalline‐ZrO2 and Its Catalytic Activity for Biginelli Condensation under Microwave Irradiation

Nanocrystalline zirconium(IV) oxide (nc‐ZrO₂) possessing high surface area was synthesized by a low temperature eco‐friendly solution combustion method using a new organic fuel alanine. The powder XRD, SEM and surface area measurements were carried out for characterization of nc‐ZrO₂. The powder XRD results revealed that, the nc‐ZrO₂ has the pure tetragonal phase. The crystallite size calculated by Scherrer's formula and BET surface area were found to be ca. 53–57 nm and ca. 275 m²/g, respectively. SEM micrograph exhibited the macroporous nature of the powder. nc‐ZrO₂ has been employed as a catalyst for the solvent‐free synthesis of 3,4‐dihydro‐ pyrimidin‐2‐ones (DHPMs) by a microwave (MW) assisted one‐pot, multicomponent Biginelli condensation reaction of araldehydes, ethylacetoacetate and urea or thiourea. DHPMs are obtained in good to excellent yields (85%–96%) under this reaction condition within short interval of time (10–20 min).     

An Efficient One‐Pot Synthesis of 3,4‐Dihydropyrimidin‐2‐ones Catalyzed by Methanesulfonic Acid

Abstract

An efficient synthesis of 3,4‐dihydropyrimidin‐2‐ones (DHPMs) from the aldehydes, β‐ketoesters, and urea in ethanol using methanesulfonic acid (CH₃SO₃H) as the catalyst is described. Compared with the classical Biginelli reaction conditions, this method has the advantage of excellent yields and short reaction time.     

Synthesis of 2-selenoxo DHPMs by Biginelli reaction with Hf(OTf)4 as catalyst

By using Hf(OTf)₄ as catalyst, a series of 2-selenoxo DHPMs have been synthesized efficiently in good yields by Biginelli reaction with selenourea as starting material.     

An efficient Biginelli one-pot synthesis of new benzoxazole-substituted dihydropyrimidinones and thiones catalysed by trifluoro acetic acid under solvent-free conditions

An efficient synthesis of benzoxazole-substituted 3,4-dihydropyrimidinones(DHPMs) using trifluoro acetic acid as the catalyst for the first time from an aldehyde,β-keto ester and benzoxazole-substituted urea/thiourea under solvent-free conditions is described.Compared to the classical Biginelli reaction conditions,this new method consistently has the advantage of excellent yields(80-91%) and short reaction time(40-130 min) at reflux temperature.     

溴化镁催化的1,2,3,4-四氢吡啶酮无溶剂合成研究

An efficient and environmentally friendly procedure for the one-pot synthesis of tetrahydropyrimidinones from aldehydes, β-diketones and urea/thiourea by using magnesium bromide as an inexpensive and easily available catalyst under solvent-free conditions was described. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good to excellent yields (74%-94%) and short reaction time (45-90 min). The structure of the Biginelli reaction product from β-diketone, salicylaldehyde and urea has been proposed to possess an oxygen-bridge by cyclization (intramolecular Michael-addition).     

On the reaction of 3,4‐dihydropyrimidones with nitric acid. Preparation and x‐ray structure analysis of a stable nitrolic acid

A series of substituted 3,4‐dihydro‐2‐pyrimidones (DHPMs) was reacted with nitric acid under different reaction conditions. Treatment of DHPMs with 50‐65% nitric acid at 0 °C led to the formation of the corresponding dehydrogenated 2‐pyrimidones in moderate to good yields. In contrast, reaction of one representative DHPM with 60% nitric acid at 50 °C led to an unusually stable nitrolic acid, involving a formal nitration, nitrosation, and dehydrogenation step. The molecular structure of this product was determined by X‐ray crystallographic analysis     

Asymmetric organocatalytic Biginelli reactions: a new approach to quickly access optically active 3,4-dihydropyrimidin-2-(1H)-ones

The Biginelli reaction, known for over 100 years, is an important multicomponent reaction for accessing dihydropyrimidinones (DHPMs). The individual enantiomers of DHPMs exhibit different or even opposite pharmaceutical activities, which require synthetic methods to easily access the optically pure DHPMs. In recent decades, many efforts have focused on developing procedures for the preparation of optically active Biginelli products. In this article, we will summarize the developments in the synthetic methods to access optically active DHPMs with an emphasis on the recent advances in the asymmetric catalytic Biginelli reactions, along with concepts to design the organocatalytic asymmetric variants.     

Synthesis of 3,4-dihydropyrimidin-2-ones (DHPMs) using mesoporous aluminosilicate (AlKIT-5) catalyst with cage type pore structure

Here we demonstrate on the synthesis of 3,4-dihydropyrimidin-2-ones (DHPMs) and their derivatives through a three-component condensation reactions of aldehyde, β-ketoester and urea or thiourea using mesoporous aluminosilicate (AlKIT-5) nanocage as catalyst and acetonitrile as solvent under reflux conditions. The catalyst was found to be highly active and selective, affording a high yield of DHPMs. Compared to the classical Biginelli reaction conditions, this new approach consistently has the advantage of excellent yields (80-96%) and short reaction times, 3.0-4.0 h. The effect of the acidity and the concentration of the catalyst on the above process was investigated. We also demonstrate the synthesis of various multifunctional Biginelli compounds using the highly active AlKIT-5 catalysts.     

Solvent-free and catalyst-free Biginelli reaction to synthesize ferrocenoyl dihydropyrimidine and kinetic method to express radical-scavenging ability

Benzoyl and ferrocenoyl 3,4-dihydropyrimidin-2(1H)-ones (-thiones) (DHPMs) were synthesized in modest yields via catalyst-free and solvent-free Biginelli condensation of 1-phenylbutane-1,3-dione or 1-ferrocenylbutane-1,3-dione, hydroxyl benzaldehyde, and urea or thiourea. This synthetic protocol revealed that catalysts may not be necessary for the self-assembling Biginelli reaction. The radical-scavenging abilities of the obtained 11 DHPMs were carried out by reacting with 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) cationic radical (ABTS(+?)), galvinoxyl radical, and 2,2'-diphenyl-1-picrylhydrazyl radical (DPPH), respectively. The variation of the concentration of these radicals with the reaction time (t) followed exponential function, [radical] = Ae(-t/a) + Be(-t/b) + C. Then, the differential style of this equation led to the relationship between the reaction rate (r) and the reaction time (t), -d[radical]/dt = (A/a)e(-t/a) + (B/b)e(-t/b), which can be used to calculate the reaction rate at any time point. On the basis of the concept of the reaction rate, r = k[radical][antioxidant], the rate constant (k) can be calculated with the time point being t = 0. By the comparison of k of DHPMs, it can be concluded that phenolic ortho-dihydroxyl groups markedly enhanced the abilities of DHPMs to quench ABTS(+?), but the introduction of ferrocenoyl group made DHPMs efficient ABTS(+?) scavengers even in the absence of phenolic hydroxyl group. This phenomenon was also found in DHPM-scavenging galvinoxyl radical. In contrast, the ferrocenoyl group cannot enhance the abilities of DHPMs to scavenge DPPH, and phenolic ortho-dihydroxyl groups still played the key role in this case.     

A new biginelli reaction procedure using potassium hydrogen sulfate as the promoter for an efficient synthesis of 3,4‐dihydropyrimidin‐2(1H)‐one

Simple and improved conditions have been found to carry out the Biginelli reaction for the synthesis of 3,4‐dihydropyrimidin‐2(1H)‐one derivatives. This synthesis was performed using potassium hydrogen sulfate as the promoter in ethylene glycol solution. Compared with the classical Biginelli reaction conditions, this new method has the advantage of excellent yields (85–95%) and short reaction time (0.5–2 h).     

One-pot synthesis of dihydropyrimidones using silica-supported heteropoly acid as an efficient and reusable catalyst: Improved protocol conditions for the Biginelli reaction

An efficient synthesis of 3,4-dihydropyrimidinones or thiones (DHPMs) is described, using silica-supported heteropoly acid H₃PW₁₂O₄₀/SiO₂ (PW/SiO₂) for the first time as the catalyst from an aldehyde, β-keto ester and urea or thiourea in acetonitrile. Compared to the classical Biginelli reaction conditions, this method consistently has the advantage of excellent yields, mild reaction conditions, ease of workup, survival of different functional groups, and short reaction times.     

Bio-Based Solvent Mediated Synthesis of Dihydropyrimidinthiones Via Biginelli Reaction

Abstract

The three-component Biginelli reaction using aldehyde, thiourea, and 1,3-dicarbonyl compounds was performed smoothly in ethyl lactate (EL) with the catalysis of trimethylsilyl chloride (TMSCl). A class of 3,4-dihydropyrimidinthiones (DHPMs) were synthesized in good to excellent yields via the bio-based solvent mediated catalytic protocol.     

Synthesis of 3,4‐Dihydropyrimidinones via Phase Transfer Catalysis

3,4‐Dihydropyrimidinone and derivatives were synthesized by the one‐pot, three‐component Biginelli condensation of an aldehyde, β‐dicarbonyl compound and urea. Synthesis was carried out in aqueous sodium hydroxide using Aliquat‐336 as a phase transfer agent. Compared to the classical Biginelli reaction conditions, this new method cousistently has the advantage of excellent yields and short reaction time.     

Manganese‐Containing Periodic Mesoporous Organosilica with Ionic‐Liquid Framework (Mn@PMO‐IL): A Powerful,Durable, and Reusable Nanocatalyst for the Biginelli Reaction

The catalytic application of a novel manganese‐containing periodic mesoporous organosilica with ionic‐liquid framework (Mn@PMO‐IL) in the Biginelli reaction was investigated. First, the Mn@PMO‐IL nanocatalyst was prepared and characterized by TEM, SEM, X‐ray photoelectron spectroscopy, and nitrogen‐sorption analysis. The catalyst was then used in the one‐pot Biginelli condensation of various aldehydes with urea and alkyl acetoacetates under solvent‐free conditions. The corresponding dihydropyrimidone products were obtained in high to excellent yields and selectivities at short reaction times. Moreover, the catalyst was recovered and successfully reused many times with no notable decrease in activity and selectivity.     

CoCl_2·6H_2O or LaCl_3·7H_2O Catalyzed Biginelli Reaction. One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1 H)-ones

Ｉｎｔｒｏｄｕｃｔｉｏｎ1,4 Ｄｉｈｙｄｒｏｐｙｒｉｄｉｎｅｓｏｆｔｈｅｎｉｆｅｄｉｐｉｎｅｔｙｐｅ (ｅ .ｇ .Ｉ—ＩＩＩ)ａｒｅｔｈｅｍｏｓｔｓｔｕｄｉｅｄｃｌａｓｓｏｆｏｒｇａｎｉｃｃａｌｃｉｕｍｃｈａｎｎｅｌｍｅｄｉｃｉｎｅ ,ｗｈｉｃｈｈａｖｅｂｅｃｏｍｅａｌｍｏｓｔｉｎｄｉｓｐｅｎｓ ａｂｌｅｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｃａｒｄｉｏｖａｓｃｕｌａｒｄｉｓｅａｓｅｓｓｕｃｈａｓｈｙｐｅｒｔｅｎｓｉｏｎ ,ｃａｒｄｉａｃａｒｒｈｙｔｈｍｉａｓ ,ｏｒａｎｇｉｎａ .1Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅ…     

Ferric Perchlorate Catalyzed One‐pot Synthesis of 1,2,3,4‐Tetrahydro‐2‐pyrimidinones and ‐thiones: an Expedient Protocol for the Biginelli Reaction

An efficient synthesis of 1,2,3,4-tetrahydro-2-pyrimidinones and -thiones using ferric perchlorate as the catalyst from an aldehyde, ethyl acetoacetate, and urea or thiourea in acetonitrile was described. Compared to the classical Biginelli reaction conditions, this new method consistently has the advantage of full catalysis, good yields and short reaction time.     

用硼酸作催化剂一锅法合成双（二氢化嘧啶酮-4-基）苯

A simple effective synthesis of bis(dihydropyrimidinone-4-yl)benzene derivatives, using boric acid as catalyst,from isophthalic aldehyde or terephthalic aldehyde, 1,3-dicarbonyl compounds and urea or thiourea in glacial acetic acid was described. As the expansion of the classical Biginelli reaction, this method has the advantage of excellent yields 83%-94% and short reaction time 0.5-1.5 h.     

Copper(I)‐catalyzed multicomponent reactions in sustainable media

Multicomponent reactions including Biginelli reaction and A³ coupling are useful synthetic methodologies as they can provide valuable intermediates and building blocks for the synthesis of bioactive natural compounds. The heterocyclic products of these transformations represent antibacterial, antitumor or anti‐inflammatory properties. In presented study, copper‐mediated protocols for Biginelli reaction and A³ coupling in sustainable solvents were reported. At first, charged NHC copper complexes were synthesized in few steps and characterized using spectroscopic methods followed by preliminary activity tests in sustainable media. Later in this study, Biginelli reaction and A³ coupling were proceeded using prepared copper catalytic systems under mild conditions. Desired nitrogen‐bearing products were obtained with moderate to very high yields. Some attempts to recycle one of the received NHC copper initiators were also investigated.     

Magnesium Bromide and Magnesium Chloride Hexahydrate Catalyzed One‐Pot Synthesis of Dihydropyrimidines via Biginelli Reaction under Solvent‐Free Conditions

Biologically important 12 new important 3,4‐dihydropyrimidin‐2‐(1H)‐ones (‐thiones) were synthesized with in one‐pot three‐component Biginelli reaction from the corresponding aromatic aldehydes (5‐methyl‐2‐thiophenecarboxaldehyde and 2‐chloro‐5‐nitrobenzaldehyde), β‐keto esters (ethylacetoacetate, allylacetoacetate, and t‐butylacetoacetate), and urea/thiourea in the presence of catalytic amount of magnesium bromide and magnesium chloride hexahydrate as nontoxic, inexpensive, and easily available catalysts under solvent‐free conditions at 80 and 100°C. Compared with the catalyst‐free three‐component Biginelli reaction conditions, this method consistently has the advantage of short reaction time (45–100 min) and good to excellent yields (75–91%).     

Synthesis of tetrahydropyrimidino[4,3‐a]isoquinolines via regiospecific N‐alkylation‐annulation of 4‐aryldihydropyrimidinones

4‐Aryldihydropyrimidinones were obtained in excellent yields via solid‐phase Biginelli reaction of arylaldehydes, β‐ketoester and urea, using bismuth nitrate, immobilized on Al₂O₃ as catalyst. Subsequently, the products were converted into corresponding tetrahydropyrimidino[4,3‐a]isoquinolines (69–73% yield) by one‐pot regiospecific N‐alkylation‐annulation reaction using sodium hydride and dimethylaminopyridine. J. Heterocyclic Chem., (2011).