Amino acid catalyzed thio-Michael addition reactions

Using amino acid as a catalyst, an inexpensive, nontoxic, environmentally friendly, metal-free reaction procedure for C-S bond formation via thio-Michael addition reaction has been developed. The thio-Michael addition products were obtained in excellent yields under mild and neutral conditions. This metal-free catalytic protocol was found to be a good alternative to the existing metal catalyst methodology for the thio-Michael addition reaction.     

无过渡金属条件下喹啉C5位碳-氢键官能化反应

喹啉是一类重要的杂环化合物,喹啉类化合物的合成方法研究备受关注。通过喹啉的碳-氢键直接官能化反应制备取代喹啉类衍生物是一种简便而有效的方法。然而,喹啉的C5位选择性碳-氢键官能化反应仍然存在挑战,目前大多在过渡金属催化下实现,无过渡金属条件下的反应亟待开发。本文按成键类型(碳-卤键、碳-氮键、碳-氧键、碳-硫键和碳-碳键)分类综述了近年来在无过渡金属条件下喹啉C5位碳-氢键官能化反应的研究进展,并对该领域的研究现状及所存在的问题进行了总结。     

Silicon-based thiourea-mediated and microwave-assisted thio-Michael addition under solvent-free reaction conditions

Silicon-based thiourea (SiliaBond® Thiourea) (Si-THU), a heterogeneous catalyst, has been applied to the highly selective C-S bond formation via Michael addition of thiols to α,β-unsaturated carbonyl compounds under solvent-free conditions at 55–60°C. The thio-Michael addition products were obtained in an excellent yield under optimised conditions. This methodology involving a metal-free as well as a metal scavenger catalyst has been found to be an alternative method for the thio-Michael addition reaction.     

C-S bond formation reaction between a phenolate and disulfide-bridged dicopper(I) complexes

A novel C-S bond formation reaction took place, when a lithium phenolate derivative was treated with a disulfide-bridged dicopper(I) complex or a bis(micro-thiolato)dicopper(II) complex under very mild conditions. The reaction has been suggested to proceed via a disulfide-bridged (micro-phenoxo)dicopper(I) complex as the common reaction intermediate. Copper(II) complexes of the modified ligands containing a thioether group (products of the C-S bond formation reaction) have been isolated and structurally characterized by X-ray analysis as model compounds of the active site of galactose oxidase. Mechanism of the C-S bond formation reaction is also discussed in relation to the biosynthetic mechanism of the organic cofactor Tyr-Cys of galactose oxidase.     

Iodine-promoted direct sulfenylation of 2,3-dihydroimidazo[2,1-b]thiazoles with disulfides

A novel and facile method for the direct sulfenylation of 2,3-dihydroimidazo[2,1-b]thiazoles with disulfides has been developed. The transformation is promoted by iodine under metal-free conditions, providing the corresponding products in moderate to good yields.     

Theoretical reinvestigation of opposite electronic effects on bond lengths in thiophenols and thiophenolic radicals

Our previous study has revealed that para-substituents have opposite electronic effects on the C-S bond lengths of thiophenols and thiophenolic radicals. Although a theoretical elucidation has been given, it has not been supported by theoretically calculated atomic charges. To give an alternative explanation, we calculated the C-S bond lengths, C-S bond electron densities, and Mulliken charges on the carbon and sulfur atoms for thiophenols, thiophenolic radicals, and thiophenolic radical cations by means of the B3LYP density functional theory method using the 6-31G(d, p) basis set. It was revealed that the C-S bond length is adequately defined in terms of C-S bond electron density. The distinct electronic effects on the C-S bond lengths of thiophenols, thiophenolic radicals and thiophenolic radical cations are well elucidated by the different electronic states (electron-deficient or-rich) of the phenyl ring and SH group.     

Structure and C-S bond cleavage in aryl 1-methyl-1-arylethyl sulfide radical cations

Steady state and laser flash photolysis (LFP) of a series of p-X-cumyl phenyl sulfides (4-X-C(6)H(4)C(CH(3))(2)SC(6)H(5): 1, X = Br; 2, X = H; 3, X = CH(3); 4, X = OCH(3)) and p-X-cumyl p-methoxyphenyl sulfides (4-X-C(6)H(4)C(CH(3))(2)SC(6)H(4)OCH(3): 5, X = H; 6, X = CH(3); 7, X = OCH(3)) has been carried out in the presence of N-methoxy phenanthridinium hexafluorophosphate (MeOP(+)PF(6)(-)) under nitrogen in MeCN. Steady state photolysis showed the formation of products deriving from the C-S bond cleavage in the radical cations 1(+?)-7(+?) (2-aryl-2-propanols and diaryl disulfides). Formation of 1(+?)-7(+?) was also demonstrated by LFP experiments evidencing the absorption bands of the radical cations 1(+?)-3(+?) (λ(max) = 530 nm) and 5(+?)-7(+?) (λ(max) = 570 nm) mainly localized in the arylsulfenyl group and radical cation 4(+?) (λ(max) = 410, 700 nm) probably mainly localized in the cumyl ring. The radical cations decayed by first-order kinetics with a process attributable to the C-S bond cleavage. On the basis of DFT calculations it has been suggested that the conformations most suitable for C-S bond cleavage in 1(+?)-4(+?) and 7(+?) are characterized by having the C-S bond almost collinear with the π system of the cumyl ring and by a significant charge and spin delocalization from the ArS ring to the cumyl ring. Such a delocalization is probably at the origin of the observation that the rates of C-S bond cleavage result in very little sensitivity to changes in the C-S bond dissociation free energy (BDFE). A quite large reorganization energy value (λ = 43.7 kcal mol(-1)) has been calculated for the C-S bond scission reaction in the radical cation. This value is much larger than that (λ = 12 kcal mol(-1)) found for the C-C bond cleavage in bicumyl radical cations, a reaction that also leads to cumyl carbocations.     

1,n-Thiosulfonylation using thiosulfonates as dual functional reagents

In recent years, the direct introduction of sulfonyl and sulfenyl groups into unsaturated substrates by using thiosulfonates as unique dual functional reagents has inarguably provided chemists a new platform for the diverse synthesis of important S-containing derivatives. These 1,n-thiosulfonylation reactions usually feature simple procedures, 100% atom economy, and high regioselectivity. This review focuses on the recent advancements in the transformations of thiosulfonates through 1,n-thiosulfonylation involving the formation of two distinct C-S bonds under transition-metal-catalyzed or metal-free conditions, where thiosulfonates act as both a sulfonyl and a sulfenyl component.     

Visible-Light-Mediated Self-Sensitized Oxidative and Regioselective C(sp2)−H Selenylation and Sulfenylation of Substituted 2-Amino-1,4-Naphthoquinones

A photochemical method based on visible-light (white LEDs/sunlight) irradiation has been developed for the regioselective and oxidative C(sp²)−H selenylation and sulfenylation of substituted 2-amino-1,4-naphthoquinones under oxygen atmosphere. The photochemical process does not require any external photoredox catalysts. The other notable advantages of this protocol are metal-free synthesis, visible light/sunlight as energy sources, good substrate scope, and moderate to good yields (41–91 %) with high regioselectivity.     

Elemental iodine mediated synthesis of thiadiazole-based dithiafulvalene donors via C(sp2)–S formation

A series of thiadiazole-based dithiafulvalene (DTF) derivatives has been synthesized in moderate yields via iodine-mediated oxidative vinylic C(sp²)–H sulfenylation with mercapto-thiadiazoles. The formation of C(sp²)–S bond was confirmed and characterized by NMR and single crystal X-ray diffraction studies. This new protocol is simple and effective for preparation DTF containing thiadiazole group.     

TBAI-mediated regioselective sulfenylation of indoles with sulfonyl chlorides in one pot

A versatile method for the synthesis of 3-sulfenylated indoles via TBAI promoted sulfenylation of indoles with sulfonyl chlorides in one pot has been presented. This system features highly regioselective, metal-free, easy operation, and shows a broad functional group tolerance leading to excellent yields. And this reaction could be easily conducted in 10?mmol scale with high effectivity. A plausible mechanism is proposed.     

Selectivity in the oxidative addition of C-S bonds of substituted thiophenes to the (C5Me5)Rh(PMe3) fragment: a comparison of theory with experiment

Theoretical studies were performed on the C-S bond activation reactions of 2-/3-cyanothiophene, 2-/3-methoxythiophene, and 2-/3-methylthiophene with the [Rh(PMe3)(C5Me5)] fragment to compare with the selectivity of these reactions observed in the experimental study, with the goal of determining whether the latter represent kinetic or thermodynamic products. Density functional theory (DFT) calculations have been used to optimize the ground-state structures of the two possible insertion products and the transition state structures leading to the formation of the products arising from the above cleavage reactions to address this question. With the 2-cyano and 2-methoxy substituents, the observed formation of one product resulting from the exclusive insertion of the rhodium into the more hindered substituted C-S bond was found to be consistent with the calculated energy differences between the ground states of the two possible products (7.6 and 2.6 kcal mol(-1)). With 2-methylthiophene, the product resulting from the activation of the unsubstituted C-S bond is calculated to be favored by 5.8 kcal mol(-1), in agreement with observed results. The approximately 1:1 ratio of products with 3-cyano and 3-methyl substituted thiophenes are also found to be consistent with the small calculated energy differences (0.4 and 0.8 kcal mol(-1)) between the ground states of the two insertion products. Although the observed high selectivity in the formation of a single C-S bond activation product with 3-methoxythiophene appears to be underestimated in the calculations, the observed products for all substituted thiophenes correlate with the calculated thermodynamic products. In addition, the kinetic selectivities predicted based on the calculated C-S bond activation barriers are different from those observed experimentally. Consequently, these investigations demonstrate that DFT calculations can be used reliably to differentiate if an experimentally observed C-S bond activation reaction proceeds under thermodynamic or kinetic control.     

Photosensitized oxidation of alkyl phenyl sulfoxides. C-S bond cleavage in alkyl phenyl sulfoxide radical cations

The 3-cyano-N-methylquinolinium perchlorate (3-CN-NMQ(+)ClO4(-))-photosensitized oxidation of phenyl alkyl sulfoxides (PhSOCR1R2R3, 1, R1 = R2 = H, R3 = Ph; 2, R1 = H, R2 = Me, R3 = Ph; 3, R1 = R2 = Ph, R3 = H; 4, R1 = R2 = Me, R3 = Ph; 5, R1 = R2 = R3 = Me) has been investigated by steady-state irradiation and nanosecond laser flash photolysis (LFP) under nitrogen in MeCN. Steady-state photolysis showed the formation of products deriving from the heterolytic C-S bond cleavage in the sulfoxide radical cations (alcohols, R1R2R3COH, and acetamides, R1R2R3CNHCOCH3) accompanied by sulfur-containing products (phenyl benzenethiosulfinate, diphenyl disulfide, and phenyl benzenethiosulfonate). By laser irradiation, the formation of 3-CN-NMQ(*) (lambda(max) = 390 nm) and sulfoxide radical cations 1(*+) , 2(*+), and 5(*+) (lambda(max) = 550 nm) was observed within the laser pulse. The radical cations decayed by first-order kinetics with a process attributable to the heterolytic C-S bond cleavage leading to the sulfinyl radical and an alkyl carbocation. The radical cations 3(*+) and 4(*+) fragment too rapidly, decaying within the laser pulse. The absorption band of the cation Ph2CH(+) (lambda(max) = 440 nm) was observed with 3 while the absorption bands of 3-CN-NMQ(*) and PhSO(*) (lambda(max) = 460 nm) were observed just after the laser pulse in the LFP experiment with 4. No competitive beta-C-H bond cleavage has been observed in the radical cations from 1-3. The C-S bond cleavage rates were measured for 1(*+), 2(*+), and 5(*+). For 3(*+) and 4(*+), only a lower limit (ca. >3 x 10(7) s(-1)) could be given. Quantum yields (Phi) and fragmentation first-order rate constants (k) appear to depend on the structure of the alkyl group and on the bond dissociation free energy (BDFE) of the C-S bond of the radical cations determined by a thermochemical cycle using the C-S BDEs for the neutral sulfoxides 1-5 obtained by DFT calculations. Namely, Phi and k increase as the C-S BDFE becomes more negative, that is in the order 1 < 5 < 2 < 3, 4, which is also the stability order of the alkyl carbocations formed in the cleavage. An estimate of the difference in the C-S bond cleavage rate between sulfoxide and sulfide radical cations was possible by comparing the fragmentation rate of 5(*+) (1.4 x 10(6) s(-1)) with the upper limit (10(4) s(-1)) given for tert-butyl phenyl sulfide radical cation (Baciocchi, E.; Del Giacco, T.; Gerini, M. F.; Lanzalunga, O. Org. Lett. 2006, 8, 641-644). It turns out that sulfoxide radical cations undergo C-S bond breaking at a rate at least 2 orders of magnitude faster than that of corresponding sulfide radical cations.     

Aerobic visible-light photoredox radical C-H functionalization: catalytic synthesis of 2-substituted benzothiazoles

An aerobic visible-light driven photoredox catalytic formation of 2-substituted benzothiazoles through radical cyclization of thioanilides has been accomplished. The reaction features C-H functionalization and C-S bond formation with no direct metal involvement except the sensitizer. The reaction highlights the following: (1) visible-light is the reaction driving force; (2) molecular oxygen is the terminal oxidant, and (3) water is the only byproduct.     

Copper in Cross-Coupling Reactions: II. Arylation of Thiols

Russian Journal of Organic Chemistry - The review presents an analysis of the recent literature on the use of copper catalysis in the formation of a C-S bond between aryl halides and thiols. The...     

Metal-free base-promoted sulfenylation for the synthesis of α-arylthio-α,β-unsaturated ketones

A new sulfenylation reaction has been established, stereoselectively affording 37 examples of α-arylthio-α,β-unsaturated ketones with generally good yields via a metal-free three-component reaction of α-thiocyanate ketones with diaryliodonium salts and 1,2-dicarbonyls. The reaction enabled multiple bond-forming events including C(sp²)–S formation to provide a high-efficient and practical method toward α-arylthio-α,β-unsaturated ketones. The reasonable mechanism for forming α-arylthio-α,β-unsaturated ketones was proposed.     

Metal-free asymmetric hydrogenation and hydrosilylation catalyzed by frustrated Lewis pairs

The activation of H₂ for the catalytic hydrogenation of unsaturated compounds is one of the most useful reactions in both academia and chemical industry, which has long been predominated by the transition-metal catalysis. However, metal-free hydrogen activation represents a formidable challenge, and has been less developed. The recent emerging chemistry of frustrated Lewis pairs (FLPs) with a combination of sterically encumbered Lewis acids and Lewis bases provides a promising approach for metal-free hydrogenation due to their amazing abilities for the challenging H₂ activation. In the past several years, the hydrogenation of a wide range of unsaturated compounds using FLP catalysts has been successfully developed. Despite these advances, the corresponding asymmetric hydrogenation is just in its start-up step. Similar to the mode of HH bond activation, SiH bond can also be activated by FLPs for the hydrosilylation of ketones and imines. But its asymmetric version is also not well-solved. This Letter will outline the recent important progress of metal-free catalytic asymmetric hydrogenation and hydrosilylation using FLP catalysts.     

Metal-free visible-light-induced oxidative cyclization reaction of 1,6-enynes and arylsulfinic acids leading to sulfonylated benzofurans

A new and convenient visible-light-induced method has been developed for the synthesis of sulfonylated benzofurans via oxidative cyclization reaction of 1,6-enynes and arylsulfinic acids.This reaction was carried out under metal-free and mild conditions,in which the C-S,C-C and C=O bonds could be sequentially formed in one pot operation.     

Palladium-catalysed intramolecular enolate O-arylation and thio-enolate S-arylation: synthesis of benzo[b]furans and benzo[b]thiophenes

Enolates derived from α-(ortho-haloaryl)-substituted ketones undergo palladium-catalysed C-O bond formation to deliver benzofuran products in good yield. A catalyst generated from Pd₂(dba)₃ and the ligand DPEphos effects the key bond formation to deliver a variety of substituted products from both cyclic and acyclic precursors. The analogous thio-ketones undergo C-S bond formation using identical reaction conditions and are converted to benzothiophene products. A cascade sequence that produces the required α-aryl ketones in situ has also been developed, although the substrate scope is more restricted.     

Carbon-sulfur bond cleavage in Bis(N-alkyldithiocarbamato)cadmium(II) complexes: heterolytic desulfurization coupled to topochemical proton transfer

Three bis(N-alkyldithiocarbamato)cadmium(II) complexes [Cd(S(2)CNHR)(2)] (1, R = n-C(3)H(7); 2, R = n-C(5)H(11); 3, n-C(12)H(25)) were prepared by metathesis of the corresponding lithium salt, Li[S(2)CNHR], with cadmium chloride. The crystal structures of 2 and 3 consist of planar molecular units of [Cd(S(2)CNHR)(2)] connected by intermolecular Cd.S interactions to give a one-dimensional chain. The chains are connected by a network of intermolecular N-H.S hydrogen bonds between the dithiocarbamato nitrogen atom and bridging sulfur atoms in neighboring chains. In solution, the (113)Cd NMR spectrum of 2 is dependent on concentration and temperature, indicative of a dimerization equilibrium mediated by similar Cd.S intermolecular bridging interactions. In the solid state, thermal gravimetric analyses show that all three complexes decompose smoothly via a heterolytic C-S bond cleavage reaction to give the corresponding alkyl isothiocyanate and cadmium sulfide as the primary products, with the formation of primary amine and CS(2) as coproducts. These products can result only from the net transfer of protons between N-alkyldithiocarbamato ligands in the solid state. Thus, the C-S bond cleavage reaction is interpreted in terms of the topochemical arrangement of molecular units in the crystalline state, which provides a pathway for proton transfer between ligands via N-H.S hydrogen bonds. Decomposition was also initiated by addition of a tertiary amine to a solution of [Cd(S(2)CNHR)(2)]. This confirms that C-S bond cleavage must be coupled to deprotonation of the -NH group, and explains why dialkylated derivatives [Cd(S(2)CNR(2))(2)] are inert to this particular mode of C-S bond cleavage. This system thus constitutes an unusual example of heterolytic, nonoxidative C-S bond cleavage that appears to proceed by a topochemical transfer of protons, which has implications for C-S bond cleavage processes in single-source precursors for II-VI semiconductor materials.