Characterisation of biological RMs for potential use in human brain analysis

Summary In order to investigate the precision and accuracy obtainable with instrumental neutron activation analysis (INAA) and inductively coupled plasma atomic emission spectrometry (ICP-AES), five different biological reference materials were analyzed. Four of them originated from the US National Institute of Standards and Technology (NIST) (Bovine Liver (SRM 1577; 1577/a; 185/A), Orchard Leaves (SRM 1571)) and one of them came from the International Atomic Energy Agency (IAEA) (Animal muscle (H-4)). The decomposition efficiency of microwave acid digestion was examined in comparison to digestions carried out in a Parrbomb. Five to ten subsamples of each material were subjected to the two digestion procedures and the solutions were analyzed by ICP-AES. The dried samples were analyzed by INAA. Up to 16 elements (Al, B, Ca, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Zn) were determined in various materials.     

Multielement analytical procedure coupling INAA, ICP-MS and ICP-AES: Application to the determination of major and trace elements in sediment samples of the Bouregreg river (Morocco)

Instrumental neutron activation analysis (INAA), inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) were used for the determination of major and trace elements in sediment samples of the Bouregreg river (Morocco). The reliability of the results was checked, by using IAEA Soil-7 certified reference material. Results obtained by the three techniques were compared to control digestions efficiencies. A general good agreement was found between INAA and both ICP-MS and ICP-AES after alkaline fusion (ICPf). The ICP-MS technique used after acid attack (ICPa) was satisfactory for a few elements. A principal component analysis (PCA) has been used for analyzing the variability of concentrations, and defining the most influential sites with respect to the general variation trends. Three groups of elements could be distinguished. For these groups a normalization of concentrations to the central element concentration (that means Mn, Si or Al) is proposed.     

Comparative evaluation of the possibilities of INAA, ED-XRF, ICP-AES and AAS in the analysis of plants

The usefulness of INAA, radionuclide ED-XRF, ICP-AES and AAS are comparatively evaluated for the determination of nutrients, essential and trace elements in various plant matrices. The comparison is performed by analysis of the following reference materials: NIST-SRM-1573, NIST-SRM-1575, NIES-1, NIES-3, NIES-6, IAEA-V-10 and Bowen's kale. The detection limits, accuracy and precision of the methods are discussed and a combination of INAA and GFAAS is recommended for analysis of plants for monitoring purposes.     

Concentrations of elements in brain tumours

The aim of our experiments was to investigate the possible elemental concentration changes in brain tumours (glioblastoma multiforme). Our project also incorporated the determination of the regional distribution of elements in normal human brains. 17 elements (Na, K, Ca, Mg, Fe, P, S, Al, B, Ba, Co, Cr, Ni, Mn, Pb, Sr, Zn) have been measured in 21 different regions of 20 normal brains and in clinically and histopathologically selected brain regions of patients with brain tumours. Analyses were carried out by instrumental neutron activation analysis (INAA) and inductively coupled plasma atomic emission spectrometry (ICP-AES). Quality control was ensured by using NBS Bovine Liver 1577a standard reference material. Comparison between the healthy and brain tumour concentration data using statistical evaluation revealed only a few elements (e.g. B, Zn, Sr) which showed significant differences as a consequence of the brain tumour.     

Determination of metal concentrations in lichen samples by inductively coupled plasma atomic emission spectroscopy technique after applying different digestion procedures

Three digestion procedures have been tested on lichen samples for application in the determination of major, minor and trace elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V and Zn) in lichen samples collected in Aegean Region of Turkey by inductively coupled plasma atomic emission spectrometer (ICP-AES). The acid mixture of concentrated HNO₃, H₂O₂ and HF were used. The instrument was optimized using lichen matrix considering RF power, nebulizer pressure, auxiliary flow rate and pump rate. The accuracy of the overall analyses was first estimated by analysis of two certified reference materials. Good agreement between measured and reference values were found for almost all elements. As the second way of determining the accuracy, results obtained from independent analytical techniques (ICP-AES and instrumental neutron activation analysis (INAA)) were compared for all elements by analyzing real samples. Correlation coefficients of two techniques for the elements ranged between 0.70 (Mg) and 0.96 (Fe). Among the three digestion systems, namely microwave, open vessel and acid bomb, microwave digestion system gave the best recovery results. The method detection limit (MDL) was computed using reagent blanks of microwave digestion system since it provides cleaner sample preparation. Detection limit is adequate for all elements to determine the elements in lichen samples. The precision was assessed from the replicate analyses of reagent blanks of microwave digestion system and was found to be less than 1.5% relative standard deviation (R.S.D.).     

Microwave assisted extraction for trace element analysis of plant materials by ICP-AES

Application of microwave assisted extraction for the decomposition and dissolution of plant samples for trace metal determination by ICP-AES was examined. Dried onion, leaves of spinach beet and three reference materials CTA-OTL-1, CTA-VTL-2 and CL-1 were analyzed. Water, EDTA and hydrochloric acid (0.01, 0.10 and 1.0 M, respectively) were used as leaching solutions. The extraction efficiency was investigated by comparison of the results with those obtained after microwave wet digestion. HCl was found to be very suitable for quantitative extraction of B, Ba, Cd, Cu, Mn, Ni, Pb, Sr and Zn from the samples. For reference materials, the measured concentrations are well consistent with the certified values. The use of EDTA led to a complete extraction of B, Cd, Ni, Pb, Sr and Zn. Water was found to be a good leaching solution for boron. For extraction with HCl and EDTA, the RSD values for the concentrations measured were below 8% for most of the elements.     

Determination of trace elements in coal and coal fly ash by joint-use of ICP-AES and atomic absorption spectrometry

Microwave-acid digestion (MW-AD) followed by inductively coupled plasma-atomic emission spectrometry (ICP-AES), graphite furnace atomic absorption spectrometry (GFAAS), and hydride generation atomic absorption spectrometry (HGAAS) were examined for the determination of various elements in coal and coal fly ash (CFA). Eight certified reference materials (four coal samples and four CFA samples) were tested. The 10 elements (As, Be, Cd, Co, Cr, Mn, Ni, Pb, Sb, and Se), which are described in the Clean Air Act Amendments (CAAA), were especially considered. For coal, the HF-free MW-AD followed by ICP-AES was successful in the determination of various elements except for As, Be, Cd, Sb, and Se. These elements (except for Sb) were well-determined by use of GFAAS (Be and Cd) and HGAAS (As and Se). For CFA, the addition of HF in the digestion acid mixture was needed for the determination of elements, except for As, Sb, and Se, for which the HF-free MW-AD was applicable. The use of GFAAS (Be and Cd) or HGAAS (Sb and Se) resulted in the successful determination of the elements for which ICP-AES did not work well. The protocol for the determination of the 10 elements in coal and CFA by MW-AD followed by the joint-use of ICP-AES, GFAAS, and HGAAS was established.     

Nutritional and Environmental Properties of Algal Products Used in Healthy Diet by INAA and ICP-AES

Spirulina platensis alga sampled in the Caribbean Sea and seven other commercial algal products available on the Italian market of different origin and aspect, have been analyzed by instrumental neutron activation analysis (INAA) and inductively coupled plasma-atomic emission spectrometry (ICP-AES). By neutron irradiation and -ray spectrometry (INAA), as many as 20 elements could be measured instrumentally without any chemical treatment. Cu, Mg, Mn and Pb were determined after dissolution of the sample by ICP-AES. The cross-checking of the data, specifically by comparing those of Ca, Cr, Fe and Zn, obtained by the two techniques was found to be in good agreement. Special attention from analytical and nutritional point of view has been devoted to the toxic metals. The measurements have been carried out employing the reference algal material prepared by International Atomic Energy Agency (IAEA).     

Elemental analysis of the marine sediment reference materials MESS-1 and PACS-1 by instrumental neutron activation analysis

Two fairly recent sediment reference materials (MESS-1, PACS-1) have been analyzed by INAA in order to determine the concentration of their elements and to ascertain the homogeneity of each standard. Two rock samples (USGS-GSP-1 and JG-1) were used as standards for the determination of element concentrations, for inter-calibration purposes and also to assess the precision of the technique used. Eighteen elements were determined in these sediments. Comparison of the certified values with our results, where this is possible, indicates the accuracy of the method for environmental studies. These materials were shown to be very homogeneous and hence useful as sediment standards. The data presented here extend the range of useful element concentrations in these reference materials.     

Microwave assisted extraction for trace element analysis of plant materials by ICP-AES

Application of microwave assisted extraction for the decomposition and dissolution of plant samples for trace metal determination by ICP-AES was examined. Dried onion, leaves of spinach beet and three reference materials CTA-OTL-1, CTA-VTL-2 and CL-1 were analyzed. Water, EDTA and hydrochloric acid (0.01, 0.10 and 1.0 M, respectively) were used as leaching solutions. The extraction efficiency was investigated by comparison of the results with those obtained after microwave wet digestion. HCl was found to be very suitable for quantitative extraction of B, Ba, Cd, Cu, Mn, Ni, Pb, Sr and Zn from the samples. For reference materials, the measured concentrations are well consistent with the certified values. The use of EDTA led to a complete extraction of B, Cd, Ni, Pb, Sr and Zn. Water was found to be a good leaching solution for boron. For extraction with HCl and EDTA, the RSD values for the concentrations measured were below 8% for most of the elements. Received: 4 May 2000 / Revised: 20 June 2000 / Accepted: 22 June 2000     

Determination of trace elements in soil and plants in the Orontes basin of Syria by using instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) have been used for the determination of some major, minor and trace elements (As, Cr, Co, Ni, Zn, Sb, Sc, Ce, Ti, Fe, Mn and V) in various plant leaves together with their soil. The accuracy of the measurements have been evaluated by analyzing a number of plant and soil reference materials, precision have been estimated by triplicate analysis of the sample as well as that of the reference material. The obtained accurate and reliable data of some trace elements on microgram level for plants and soil will serve as baseline values and will be helpful to monitor the changes in the trace element content of soil and plant leaves.The authors are thankful to Prof. I. Othman General Director of AECS for his encouragement and his support.     

Determination of trace elements in soil and plants in the Orontes basin of Syria by using instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) have been used for the determination of some major, minor and trace elements (As, Cr, Co, Ni, Zn, Sb, Sc, Ce, Ti, Fe, Mn and V) in various plant leaves together with their soil. The accuracy of the measurements have been evaluated by analyzing a number of plant and soil reference materials, precision have been estimated by triplicate analysis of the sample as well as that of the reference material. The obtained accurate and reliable data of some trace elements on microgram level for plants and soil will serve as baseline values and will be helpful to monitor the changes in the trace element content of soil and plant leaves.The authors are thankful to Prof. I. Othman General Director of AECS for his encouragement and his support.     

Trace element study of kidney stones from subjects belonging to stone belt region of India

Kidney stones obtained from six patients belonging to the stone belt region of India (Punjab) were analyzed for inorganic constituents using instrumental neutron activation analysis (INAA) and energy dispersive X-ray fluorescence (EDXRF) techniques. For INAA, samples were irradiated along with IAEA RM Soil 7 as reference standard in CIRUS reactor, BARC, Mumbai. Gamma activity of irradiated samples was measured using a 45% relative efficiency HPGe detector coupled to 8?k channel analyzer. EDXRF method was used for determination of concentration of Ca. The concentrations of ten elements namely Ca, Na, K, Mn, Co, Cr, Zn, Br, Sm and Cl, are reported and discussed.     

Determination of Elements in Japanese Standard Soil Materials by Means of Insturmental Neutron Activation Analysis

Instrumental neutron activation analysis (INAA), and inductively coupled plasma mass spectroscopy (ICP-MS) were applied to the determination of major elements and rare earth elements in Japanese Standard Soil Materials (NDG-1 to -8). Eight major elements, Al, Fe, Ti, Ca, Mg, Mn, K, and Na were determined by INAA. A comparison of the data for rare earth elements obtained by INAA and ICP-MS shows that the data of the contents determined by the two different analytical methods are in fairly good agreement with each other.     

Determination of trace elements in food by neutron activation analysis

Neutron activation analysis (NAA) methods have been developed for the determination of major, minor and trace elements in duplicate diets and individual food items. These include a cyclic instrumental NAA (CINAA) method for measuring Se content through its short-lived nuclide^77mSe; epithermal INAA (EINAA) for I and As; conventional INAA for Br, Ca, Cl, Co, Cr, Fe, K, Mg, Mn, Na, Rb, Sb, Sc, Sn and Zn; combination of EINAA and INAA for Al; radiochemical NAA (RNAA) for As, Au, Co, Cu, Fe, Hg, Mo, Sb, Se and Zn; and preconcentration NAA (PNAA) for U and Th. Accuracy of measurements have been evaluated by analyzing a number of biological and diet reference materials. Multielement concentrations of diets and foods have been measured by these methods.     

The complementary use of radioanalytical methods and trace analysis methods for the characterisation of environmental IAEA reference materials

The IAEA laboratories have access to both nuclear analytical methods and conventional instrumental methods for trace analysis for the characterisation of its environmental and biological reference materials. A technical concept integrating the homogeneity data, the recommended test portion mass and the uncertainty on the trace element concentrations is explored using a combination of INAA, XRF, ICP-MS, ICP-AES, and AAS. The above approach is illustrated by selected examples of reference materials currently under evaluation for their trace element content. They include some or all of the following elements Al, As, Br, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Se, Sr, Th, U, Zn in environmental biomonitor organisms (lichen, algae) and air dust filters.     

Trace element determination in a mussel reference material using short irradiation instrumental neutron activation analysis

The production of certified reference materials in Brazil, and the consequent availability to national end users, is an important task for the enhancement of Metrology in Chemistry status in the country, as these materials are used for method validation, equipment calibration and for establishing metrological traceability links. In this study, Instrumental Neutron Activation Analysis (INAA) was applied to the determination of bromine, chlorine, magnesium, manganese, potassium and vanadium in a mussel reference material produced at IPEN-CNEN/SP. For the determination of these elements via the comparative INAA method, the respective analytical radionuclides, ⁸⁰Br, ³⁸Cl, ²⁷Mg, ⁵⁶Mn, ⁴²K and ⁵²V, are short lived and then, short irradiations are used. Six subsamples from two bottles of the Perna perna mussel reference material were analyzed. Each subsample was simultaneously irradiated with elemental standards for 10 s at the IEA-R1 research nuclear reactor through a pneumatic transfer system. After suitable decay periods, gamma radioactivity measurements were carried out, using a hyperpure germanium detector. The accuracy of the method was checked by using the NIST SRM 1566b–“Oyster Tissue” certified reference material. The comparison of the results obtained in this study to the robust mean of the interlaboratorial collaborative trial used for the characterization of the mussel reference material was performed via z-score tests. The comparison showed that the short irradiation INAA method is suitable for the characterization of new reference materials.     

电感耦合等离子体原子发射光谱法测定不锈钢中8种合金元素

采用硝酸-盐酸-水(1+3+6)混合酸溶液溶解不锈钢样品,用电感耦合等离子体原子发射光谱法同时测定试样溶液中铬、镍、铜、锰、磷、硅、钼和钛等8种合金元素。选择钇元素作为内标元素,选择波长为357.869,231.604,327.396,257.610,178.284,251.611,202.030,337.280 nm8条谱线依次作为铬、镍、铜、锰、磷、硅、钼和钛的分析线。方法用于分析了12种标准物质,测定值同证书值一致,各元素的相对标准偏差(n=7)均小于5.5%。     

Combined application of INAA and PIXE for studying the regional aerosol composition in Southern Africa

As part of the SAFARI-92 biomass buming experiment, aerosol collections were carried out with several size-fractionating sampling devices at a number of sites in Southern Africa. One of the samplers used at all ground-based sites was a stacked filter unit (SFU). The SFU samples were analyzed by both INAA and PIXE analysis. The present paper gives an intercomparison of the analytical results obtained in order to assess the accuracy and to check the quality assurance of the analytical procedures. Twenty-one common elements were determined by both INAA and PIXE. Concentrations of 13 elements (i.e., Na, Mg, Al, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Zn and Br) were generally measured with sufficient precision in both techniques for performing the intercomparison. The INAA and PIXE data were compared in terms of PIXE/INAA concentration ratios on a sample by sample basis for the coarse and fine size fraction separately. the atmospheric concentrations for K, Mn and Fe agreed within 5–10%, the agreement between the data for the other common elements was typically better than 15%. Possible explanations for lower than 1.0 ratios for Cl, Br and Na are presented. The common elements were classified into groups according to their detectability and sensitivity in each technique.     

INAA and flame AAS of various vegetable reference materials

Summary INAA and flame AAS have been used for the analysis of a large number of vegetable reference materials. Out of all determined elements (28 by INAA and 11 by AAS) nine are common for both methods (Ca, Cd, Co, Cu, Fe, Mg, Mn, Na, Zn) and for these the possibilities of the two methods have been compared.