Extra Coordination of Zn-Tetraphenylporphine with Pyridine,Quinoline, and Acridine <Emphasis Type="Italic">N</Emphasis>-Oxides

The log K values of zinc tetraphenylporphine (Zn-TPhP) complexes with pyridine, quinoline, and acridine N-oxides and with their nonoxidized analogs, as well as the positions of absorption maxima of the complexes with respect to Zn-TPhP linearly depend on the \(pK_{BH^ + }\) of the ligands in water (methanol, acetonitrile, nitromethane, and acetone) and on Hammett σ constants in the absence of steric effects.     

Solvent extraction of calcium and strontium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and diphenyl-<Emphasis Type="Italic">N</Emphasis>-butylcarbamoylmethyl phosphine oxide

Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \( {\text{HL}}_{2}^{ + } \), \( {\text{ML}}_{2}^{2 + } \), \( {\text{ML}}_{3}^{2 + } \) and \( {\text{ML}}_{4}^{2 + } \) (M²⁺ = Ca²⁺, Sr²⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined. In the considered nitrobenzene medium, it was found that the stability of the \( {\text{SrL}}_{2,{\text{org}}}^{2 + } \) complex is somewhat higher than that of species \( {\text{CaL}}_{2,{\text{org}}}^{2 + } \), while the stability constants of the remaining strontium complexes \( {\text{SrL}}_{3,{\text{org}}}^{2 + } \) and \( {\text{SrL}}_{4,{\text{org}}}^{2 + } \) are smaller than those of the corresponding complex species \( {\text{CaL}}_{n}^{2 + } \) (n = 3, 4).     

Thermodynamic Properties of Ternary Ionic Liquid Mixture Containing a Common Ion: Excess Molar Volumes,Excess Isentropic Compressibilities,Excess Molar Enthalpies and Excess Heat Capacities

In the present investigations, the excess molar volumes, \( V_{ijk}^{\text{E}} \), excess isentropic compressibilities, \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), and excess heat capacities, \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \), for ternary 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (i) + 1-butyl-3-methylimidazolium tetrafluoroborate (j) + 1-ethyl-3-methylimidazolium tetrafluoroborate (k) mixture at (293.15, 298.15, 303.15 and 308.15) K and excess molar enthalpies, \( \left( {H^{\text{E}} } \right)_{ijk} \), of the same mixture at 298.15 K have been determined over entire composition range of x _i and x _j . Satisfactorily corrections for the excess properties \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) have been obtained by fitting with the Redlich–Kister equation, and ternary adjustable parameters along with standard errors have also been estimated. The \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) data have been further analyzed in terms of Graph Theory that deals with the topology of the molecules. It has also been observed that Graph Theory describes well \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) values of the ternary mixture comprised of ionic liquids.     

Kinetics and mechanism of base hydrolysis of tris(3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine)iron(II) in aqueous and micellar media

The kinetics of base hydrolysis of tris(3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine)iron(II), \( {\text{Fe(PDT)}}_{ 3}^{2 + } \) has been studied in aqueous, cetyltrimethyl ammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) media at 25, 35 and 45 °C under pseudo-first-order conditions, i.e. \( [ {\text{OH}}^{ - } ]\gg [{\text{Fe(PDT)}}_{ 3}^{2 + } ] \). The reactions are first order in both of substrate \( {\text{Fe(PDT)}}_{ 3}^{2 + } \) and hydroxide ion. The rates decrease with increasing ionic strength in aqueous and CTAB media, whereas SDS medium shows little ionic strength effect. The rate also increases with CTAB concentration but decreases with SDS. The specific rate constant, k and thermodynamic parameters (E _a, ΔH ^#, ΔS ^# and ΔG ^#) have also been evaluated. The near equal values of ΔG ^# obtained in aqueous and CTAB media suggest that these reactions occur essentially by the same mechanism such that \( {\text{Fe(PDT)}}_{ 3}^{2 + } \) reacts with OH^? in the rate-determining step. The ionic strength effect in SDS medium suggests that the rate-determining step involves an ion and a neutral species. The results in this study are compared with those obtained for other iron(II)-bipyridine complexes.     

Transition-metal dichalcogenide heterostructure solar cells: a numerical study

We evaluate the tunneling short-circuit current density \(J_{TU}\) in a p–i–n solar cell in which the transition metal dichalcogenide heterostructure (\(\hbox {MoS}_2/\hbox {WS}_2\) superlattice) is embedded in the intrinsic i region. The effects of varying well and barrier widths, Fermi energy levels and number of quantum wells in the i region on \(J_{TU}\) are examined. A similar analysis is performed for the thermionic current \(J_{TH}\) that arises due to the escape and recapture of charge carriers between adjacent potential wells in the i-region. The interplay between \(J_{TU}\) and \(J_{TH}\) in the temperature range (300–330 K) is examined. The thermionic current is seen to exceed the tunneling current considerably at temperatures beyond 310 K, a desirable attribute in heterostructure solar cells. This work demonstrates the versatility of monolayer transition metal dichalcogenides when utilized as fabrication materials for van der Waals heterostructure solar cells.     

Hydration and proton transport in solid solutions based on Ba<Subscript>2</Subscript>CaWO<Subscript>6</Subscript>

Hydrated alkaline-earth metal tungstates Ba₄Ca_{2 + x} W_{2 ? x} O_{12 ? 2x} with perovskite structure were studied by the thermogravimetry, ¹H NMR, IR, and Raman spectroscopy methods. Electrical conductivity and transfer numbers were measured with varying T, \(p_{O_2 } \) and \(p_{H_2 O} \). The solid solutions are capable of reversibly intercalating water and can exhibit high-temperature proton transport. The localization of protons on oxygen results in the appearance of energetically nonequivalent OH groups; a small fraction of protons are present in the form of H₂O and H₃O⁺.     

Thermodynamic Study on the Protonation and Na<Superscript>+</Superscript>, Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>-Complexation of a Biodegradable Chelant (HEIDA) at Different Ionic Strengths and Temperatures

A potentiometric method has been used for the determination of the protonation constants of N-(2-hydroxyethyl)iminodiacetic acid (HEIDA or L) at various temperatures 283.15?≤?T/K?≤?383.15 and different ionic strengths of NaCl_(aq), 0.12?≤?I/mol·kg^?1?≤?4.84. Ionic strength dependence parameters were calculated using a Debye–Hückel type equation, Specific Ion Interaction Theory and Pitzer equations. Protonation constants at infinite dilution calculated by the SIT model are \( \log_{10} \left( {{}^{T}K_{1}^{\text{H}} } \right) = 8.998 \pm 0.008 \) (amino group), \( \log_{10} \left( {{}^{T}K_{2}^{\text{H}} } \right) = 2.515 \pm 0.009 \) and \( \log_{10} \left( {{}^{T}K_{3}^{\text{H}} } \right) = 1.06 \pm 0.002 \) (carboxylic groups). The formation constants of HEIDA complexes with sodium, calcium and magnesium were determined. In the first case, the formation of a weak complex species, NaL, was found and the stability constant value at infinite dilution is log₁₀K_NaL?=?0.78?±?0.23. For Ca²⁺ and Mg²⁺, the CaL, CaHL, CaL₂ and MgL species were found, respectively. The calculated stability constants for the calcium complexes at T?=?298.15 K and I?=?0.150 mol·dm^?3 are: log₁₀β_CaL?=?4.92?±?0.01, log₁₀β_CaHL?=?11.11?±?0.02 and \( \log_{10} \beta_{\text{Ca{L}}_{2}} \)?=?7.84?±?0.03, while for the magnesium complex (at I?=?0.176 mol·dm^?3): log₁₀β_MgL?=?2.928?±?0.006. Protonation thermodynamic functions have also been calculated and interpreted.     

Additional Aspects of Complexation of Gold(I) with Thiomalate

Some equilibria involving gold(I) thiomalate (mercaptosuccinate, TM) complexes have been studied in the aqueous solution at 25 °C and I?=?0.2 mol·L^?1 (NaCl). In the acidic region, the oxidation of TM by \( {\text{AuCl}}_{4}^{ - } \) proceeds with the formation of sulfinic acid, and gold(III) is reduced to gold(I). The interaction of gold(I) with TM at n_TM/n_Au?≤?1 leads to the formation of highly stable cyclic polymeric complexes \( {\text{Au}}_{m} \left( {\text{TM}} \right)_{m}^{*} \) with various degrees of protonation depending on pH. In general, the results agree with the tetrameric form of this complex proposed in the literature. At n_TM/n_Au?>?1, the processes of opening the cyclic structure, depolymerization and the formation of \( {\text{Au}}\left( {\text{TM}} \right)_{2}^{*} \) occur: \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au}}_{ 4} ( {\text{TM)}}_{5}^{11 - } \), log₁₀ K₄₅?=?10.1?±?0.5; 0.25 \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au(TM)}}_{2}^{5 - } \), log₁₀ K₁₂?=?4.9?±?0.2. The standard potential of \( {\text{Au(TM)}}_{2}^{5 - } \) is \( E_{1/0}^{ \circ } = -0. 2 5 5\pm 0.0 30{\text{ V}} \). The numerous protonation processes of complexes at pH?<?7 were described with the use of effective functions.     

Lego-like spheres and tori

Given a connected surface \({\mathbb {F}}^2\) with Euler characteristic \(\chi \) and three integers \(b>a\ge 1<k\), an \((\{a,b\};k)\)-\({\mathbb {F}}^2\) is a \({\mathbb {F}}^2\)-embedded graph, having vertices of degree only k and only a- and b-gonal faces. The main case are (geometric) fullerenes (5, 6; 3)-\({\mathbb {S}}^2\). By \(p_a\), \(p_b\) we denote the number of a-gonal, b-gonal faces. Call an \((\{a,b\};k)\)-map lego-admissible if either \(\frac{p_b}{p_a}\), or \(\frac{p_a}{p_b}\) is integer. Call it lego-like if it is either \(ab^f\)-lego map, or \(a^fb\)-lego map, i.e., the face-set is partitioned into \(\min (p_a,p_b)\) isomorphic clusters, legos, consisting either one a-gon and \(f=\frac{p_b}{p_a}\,b\)-gons, or, respectively, \(f=\frac{p_a}{p_b}\,a\)-gons and one b-gon; the case \(f=1\) we denote also by ab. Call a \((\{a,b\};k)\)-map elliptic, parabolic or hyperbolic if the curvature \(\kappa _b=1+\frac{b}{k}-\frac{b}{2}\) of b-gons is positive, zero or negative, respectively. There are 14 lego-like elliptic \((\{a,b\};k)\)-\({\mathbb {S}}^2\) with \((a,b)\ne (1,2)\). No \((\{1,3\};6)\)-\({\mathbb {S}}^2\) is lego-admissible. For other 7 families of parabolic \((\{a,b\};k)\)-\({\mathbb {S}}^2\), each lego-admissible sphere with \(p_a\le p_b\) is \(a^fb\) and an infinity (by Goldberg–Coxeter operation) of \(ab^f\)-spheres exist. The number of hyperbolic \(ab^f\,(\{a,b\};k)\)-\({\mathbb {S}}^2\) with \((a,b)\ne (1,3)\) is finite. Such \(a^f b\)-spheres with \(a\ge 3\) have \((a,k)=(3,4),(3,5),(4,3),(5,3)\) or (3, 3); their number is finite for each b, but infinite for each of 5 cases (a, k). Any lego-admissible \((\{a,b\};k)\)-\({\mathbb {S}}^2\) with \(p_b=2\le a\) is \(a^f b\). We list, explicitly or by parameters, lego-admissible \((\{a,b\};k)\)-maps among: hyperbolic spheres, spheres with \(a\in \{1,2\}\), spheres with \(p_b\in \{2,\frac{p_a}{2}\}\), Goldberg–Coxeter’s spheres and \((\{a,b\};k)\)-tori. We present extensive computer search of lego-like spheres: 7 parabolic (\(p_b\)-dependent) families, basic examples of all 5 hyperbolic \(a^fb\) (b-dependent) families with \(a\ge 3\), and lego-like \((\{a,b\};3)\)-tori.     

The Study of Intermolecular Interactions for <Emphasis Type="SmallCaps">dl</Emphasis>-Alanine and Glycine in Aqueous <Emphasis Type="SmallCaps">l</Emphasis>(+)-Arabinose Solutions at Different Temperatures and Ambient Pressure,Using the Volumetric Approach

Density measurements are used to calculate the apparent molar volumes V_φ, limiting apparent molar volumes \(V_{\varphi }^{0}\), limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), limiting apparent molar expansibilities, \(E_{\varphi }^{0}\), and hydration numbers n_H, for dl-alanine and glycine in aqueous solutions of l(+)-arabinose at T?=?293.15 to 313.15 K. To obtain the limiting apparent molar volume, the V_φ values are extrapolated to zero molality using the linear form of the Redlich–Meyer equation. Also, the limiting apparent molar volumes of transfer, \(\Delta_{\text{t}} V_{\varphi }^{0}\), for the amino acids, from water to aqueous l(+)-arabinose solutions, are calculated from the \(V_{\varphi }^{0}\) values. The limiting apparent molar expansibility, \(E_{\varphi }^{0}\), values have been obtained from the first derivative of limiting apparent molar volumes with respect to temperature. Also the hydration number, n_H, for both amino acids in the ternary solutions are estimated. Possible solute–solvent interactions in the studied ternary systems are discussed.     

Densities and Speeds of Sound of Binary Liquid Mixtures of 1,4-Butanediol with 2-Methoxyethanol and 2-Propoxyethanol at <Emphasis Type="Italic">T</Emphasis> = (303.15, 308.15, 313.15 and 318.15) K

Densities, ρ, and speeds of sound, u, for the binary liquid mixtures of 1,4-butanediol (1,4-BD) + 2-alkoxyethanols {2-methoxyethanol (2-ME), or 2-propoxyethanol (2-PE)} over the whole composition range have been measured at T = (303.15, 308.15, 313.15 and 318.15) K, and at atmospheric pressure (p = 0.1 kPa). Experimental data for the densities and speeds of sound have been used to derive the quantities like excess molar volume, \( V_{\text{m}}^{\text{E}} \), excess isentropic compressibility, \( \kappa_{S}^{\text{E}} \), excess molar isentropic compressibility, \( K_{{S,{\text{m}}}}^{\text{E}} \), excess speed of sound, \( u^{\text{E}} \), and excess isobaric thermal expansion \( \alpha_{p}^{\text{E}} \). These excess parameters were correlated by Redlich–Kister polynomials. Excess partial molar volumes (\( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \)) and their limiting values at infinite dilution (\( \bar{V}_{\text{m,1}}^{{ 0 {\text{E}}}} \) and \( {\bar{\text{V}}}_{\text{m,2}}^{{ 0 {\text{E}}}} \)) have been calculated from the experimental density measurements and were analytically obtained using the Redlich–Kister polynomials. The results are discussed in terms of intermolecular interactions and their dependence on composition and temperature.     

The Partial Molar Isothermal Compressions of the Nucleosides Adenosine,Cytidine, and Uridine in Aqueous Solution at <Emphasis Type="Italic">T</Emphasis> = (288.15 and 313.15) K

Sound speeds have been measured for aqueous solutions of the nucleosides adenosine, cytidine, and uridine at T = (288.15 and 313.15) K and at ambient pressure. The partial molar isentropic compressions at infinite dilution, \( K_{S,2}^{\text{o}} \), were derived from the speed of sound data. The partial molar heat capacities at infinite dilution, \( C_{p,2}^{\text{o}} \), for the three nucleosides at T = (288.15 and 313.15) K were also determined. These \( K_{S,2}^{\text{o}} \) and \( C_{p,2}^{\text{o}} \) results, along with partial molar isobaric expansions at infinite dilution, \( E_{2}^{\text{o}} = \, (\partial V_{2}^{\text{o}} /\partial T)_{p} \), that were derived using data from the literature, were used to evaluate the partial molar isothermal compressions at infinite dilution, \( K_{T,2}^{\text{o}} \{ K_{T,2}^{\text{o}} = - \, (\partial V_{2}^{\text{o}} /\partial p)_{T} \} \), for the nucleosides. The \( K_{T,2}^{\text{o}} \) results were rationalized in terms of nucleoside hydration and its temperature dependence.     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

Measurement and Calculation the Excess Molar Properties of Binary Mixtures Containing Isobutanol, 1-Amino-2-Propanol,and 1-Propanol at Temperatures of (293.15 to 333.15) K

Densities, ρ, and viscosities, η, of pure isobutanol, 1-amino-2-propanol, and 1-propanol, along with their binary mixtures of {x ₁isobutanol + x ₂1-propanol}, {x ₁1-amino-2-propanol + x ₂1-propanol}, and {x ₁1-amino-2-propanol + x ₂isobutanol} were measured over the entire composition range and at temperatures (293.15–333.15) K at ambient pressure (81.5 kPa). Excess molar properties such as the excess molar volume, V _m ^E , partial molar volumes, \( \bar{V}_{1} \) and \( \bar{V}_{2} \), excess partial molar volumes, \( \bar{V}_{1}^{\text{E}} \) and \( \bar{V}_{2}^{\text{E}} \), thermal expansion coefficient, α, excess thermal expansion coefficient, α ^E, viscosity deviation, Δη, and the excess Gibbs energy of activation, ?G ^E*, for the binary mixtures were calculated from the experimental values of densities and viscosities. The excess values of the binary mixtures are negative in the entire composition range and at all temperatures, and increase with increasing temperature. Viscosity deviations, Δη, are negative over the entire composition range and decrease with increasing temperature. The viscosities of the mixtures were correlated by the models of McAllister, Heric, Hind, Katti, and Nissan. The obtained data were correlated by Redlich–Kister equation and the fitting parameters and standard deviations were determined.     

Conductivity and thermal expansion of the Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>1.9</Subscript> solid electrolyte in the oxidizing and reducing atmospheres

Highly compact (99%) solid electrolyte Ce_0.8Gd_0.2O_1.9 with submicron (0.3 μm) grains is synthesized. The dilatometric (20–850°C) and conductivity (180–350°C) measurements are performed on the electrolyte in air and as a function of the partial oxygen pressure \(p_{O_2 } \) (0.21?1×10^?25 atm) at 600, 700, and 800°C. An inflection is found in the temperature dependences of the thermal coefficient of linear expansion and conductivity (impedance measurements) at ～230°C, which is the evidence for a phase transition. The activation energies for conduction in the grain bulk and boundaries differ only slightly, indicating that the grain boundaries’ resistance is caused not by the precipitation of the second phase at the boundaries, but most probably by the presence of intergranular nanopores. The dilatometric measurements confirm a significant increase in the linear dimensions of Ce_0.8Gd_0.2O_1.9 in the reducing atmospheres with a parallel increase in its electron conductivity. The electron conductivity and specific elongation increase proportionally to \(p_{O_2 }^{ - 1/4} \) at all temperatures. The \(p_{O_2 } \) values, at which the transport numbers of ions t _i = 0.5, are determined. They are 10^?22.5, 10^?20, and 10^?18 atm at 600, 700, and 800°C, respectively.     

Densities,Ultrasonic Velocities,Excess Properties and IR Spectra of Binary Liquid Mixtures of Organic Esters (Ethyl Lactate,Some Organic Carbonates)

Organic esters of carbonic acid {dimethyl carbonate (DMC)/diethyl carbonate (DEC)/propylene carbonate (PC)}, in combination with a lactate ester {ethyl lactate (EL)}, with green chemistry characteristics were chosen for the present study of molecular interactions in binary liquid mixtures. Densities (ρ) and ultrasonic velocities (U) of the pure solvents and liquid mixtures were measured experimentally over the entire composition range at temperatures (303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. The experimental data was used to calculate thermodynamic and acoustic parameters \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \), \( L_{\text{f}}^{\text{E}} \), \( \bar{V}_{\text{m,1}}^{{}} \), \( \bar{V}_{\text{m,2}}^{{}} \), \( \bar{V}_{\text{m,1}}^{\text{E}} \), \( \bar{V}_{\text{m,2}}^{\text{E}} \), \( \bar{V}_{ 1}^{\text{E,0}} \) and \( \bar{V}_{ 2}^{\text{E,0}} \) and the excess functions were fitted with the Redlich–Kister polynomial equation to obtain the binary solution coefficients and the standard deviations. It was observed that the values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) are positive for the mixtures of (EL + DMC/DEC) and negative for those of (EL + PC) over the entire range of composition and temperature. The positive values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) indicate the action of dispersion forces between the component molecules of (EL + DMC/DEC) mixtures whereas negative values for the mixture (EL + PC) suggest the existence of strong specific interactions between the component molecules, probably resulting from chemical and structural contributions. The excess properties have also been analyzed by using the reduced (\( Y^{\text{E}} /x_{1} x_{2} \)) excess function approach and the results are found to be in agreement with those from the corresponding \( Y^{\text{E}} \)(= \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \)) values. This is further supported by FTIR spectral analysis.     

The diffusion of oxygen and ion transport in lanthanum cobaltite LaCoO<Subscript>3-δ</Subscript>

The chemical diffusion coefficient of oxygen vacancies and oxygen ion conductivity in lanthanum cobaltite LaCoO₃ were determined by the polarization method as functions of oxygen partial pressure \(p_{O_2 } \) (atm) and temperature T(K) over the ranges ?4 ≤ log \(p_{O_2 } \) ≤ 0 and 1173 K ≤ T ≤ 1323 K. The mobilities (cm²/(V s)) of oxygen vacancies calculated over the temperature range studied satisfy the inequalities 1.8 × 10^?5 ≤ \(v_{v_0 } \) ≤ 3.4 × 10^?5. The transfer numbers of oxygen vacancies were calculated. These numbers change depending on oxygen partial pressure over the range 5 × 10^?7 ≤ t ₀ ≤ 1 × 10^?5. The activation energy of self-diffusion of oxygen vacancies was found to be E _a= 104 ± 10 kJ/mol (1.1 ± 0.1 eV).     

Solubility and physicochemical properties of lithium molybdate-<Emphasis Type="Italic">n</Emphasis>-butanol-water solutions at 25°C

Solubilities in the Li₂MoO₄-n-C₄H₉OH-H₂O system at 25°C have been studied. New chemical compounds are not formed in the system. The miscibility of the solvents noticeably decreases with increasing Li₂MoO₄ concentration. The C₄H₉OH solubility decreases from 7.45 wt % in neat water to 0.01 wt % in a saturated (44.40 wt %) aqueous solution of Li₂MoO₄. The H₂O solubility in n-C₄H₉OH decreases from 20.48 to 5.50 wt % in the presence of trace amounts of Li₂MoO₄. In the invariant state, saturated liquid phases (\(L_{E_1 } \) and \(L_{E_2 } \)), which are in equilibrium with solid Li₂MoO₄, have the following compositions (wt%): for \(L_{E_1 } \), 43.94% Li₂MoO₄, 0.01% C₄H₉OH, and 56.05% H₂O; and for \(L_{E_2 } \), 0.0011% Li₂MoO₄, 94.50% C₄H₉OH, and 5.50% H₂O. The density, refractive index, dynamic viscosity, and electrical conductivity of the saturated solutions of the system have been determined. The isotherms have been calculated for the specific and molar volumes, kinematic viscosity, and equivalent and reduced electrical conductivity of the solutions.     

Vacuum ultraviolet absorption spectra of simple amides

Vacuum ultraviolet absorption spectra of six simple amides were measured. It was found that the positions of the firstπ→π ^* transition bands shift appreciably by the substitutions of methyl groups for hydrogen atoms of the NH₂ and\(\begin{gathered} | \hfill \\ H - C = O \hfill \\ \end{gathered} \) groups. A general tendency is that the substitution in the NH₂ group shifts the band toward longer wavelengths, in the\(\begin{gathered} | \hfill \\ H - C = O \hfill \\ \end{gathered} \) group however towards shorter wavelengths. This was explained satisfactorily by considering the nature of the band (intramolecular charge-transfer band) and the hyperconjugation effect of the methyl group.