Electro-mechanical sliding frictional contact of a piezoelectric half-plane under a rigid conducting punch

This paper investigates the two-dimensional sliding frictional contact of a piezoelectric half-plane in the plane strain state under the action of a rigid flat or a triangular punch. It is assumed that the punch is a perfect electrical conductor with a constant electric potential. By using the Fourier integral transform technique and the superposition theorem, the problem is reduced to a pair of coupled Cauchy singular integral equations and then is numerically solved to determine the unknown contact pressure and surface electric charge distribution. The effects of the friction coefficient and electro-mechanical loads on the normal contact stress, normal electric displacement, in-plane stress and in-plane electric displacement are discussed in detail. It is found that the friction coefficient has a significant effect on the electro-mechanical sliding frictional contact behaviors of the piezoelectric materials.     

Moving contact problems involving a rigid punch and a functionally graded coating

Frictional contact mechanics analysis for a rigid moving punch of an arbitrary profile and a functionally graded coating/homogeneous substrate system is carried out. The rigid punch slides over the coating at a constant subsonic speed. Smooth variation of the shear modulus of the graded coating is defined by an exponential function and the variation of the Poisson's ratio is assumed negligible. Coulomb's friction law is adopted. Hence, tangential force is proportional to the normal applied force through the coefficient of friction. An analytical method is developed utilizing the singular integral equation approach. Governing partial differential equations are derived in accordance with the theory of elastodynamics. The mixed boundary value problem is reduced to a singular integral equation of the second kind, which is solved numerically by an expansion-collocation technique. Presented results illustrate the effects of punch speed, coefficient of friction, material inhomogeneity and coating thickness on contact stress distributions and stress intensity factors. Comparisons indicate that the difference between elastodynamic and elastostatic solutions tends to be quite larger especially at higher punch speeds. It is shown that use of the elastodynamic theory provides more realistic results in contact problems involving a moving punch.     

The contact problem for a two-layer spherical base

Analytical methods for solving problems of the interaction of punches with two-layer bases are described using in the example of the axisymmetric contact problem of the theory of elasticity of the interaction of an absolutely rigid sphere (a punch) with the inner surface of a two-layer spherical base. It is assumed that the outer surface of the spherical base is fixed, that the layers have different elastic constants and are rigidly joined to one anther, and that there are no friction forces in the contact area. Several properties of the integral equation of this problem are investigated, and schemes for solving them using the asymptotic method and the direct collocation method are devised. The asymptotic method can be used to investigate the problem for relatively small layer thicknesses, and the proposed algorithm for solving the problem by the collocation method is applicable for practically any values of the initial parameters. A calculation of the contact stress distribution, the parameters of the contact area, and the relation between the displacement of the punch and the force acting on it is given. The results obtained by these methods are compared, and a comparison with results obtained using Hertz, method is made for the case in which the relative thickness of the layers is large.     

Investigation on the 2D Contact of Multilayer Functionally Graded Piezoelectric Material Coating Under Conducting Indenters北大核心CSCD

考虑了材料参数可按照任意函数形式变化的功能梯度压电材料(FGPM)涂层在不同形状导电压头作用下的接触问题,研究了梯度系数对功能梯度压电涂层接触力学行为的影响.建立了多层功能梯度压电材料涂层模型,运用了Fourier积分变换和传递矩阵将多层功能梯度压电材料涂层的接触问题转化为奇异积分方程.利用GaussChebyshev数值计算方法,得到了多层功能梯度压电材料涂层-基底结构在刚性导电平压头和圆柱形压头作用下的表面应力分布和电荷分布.利用数值解,分析了材料参数按照不同变化形式的FGPM涂层对最大压痕和电势的影响,还分析了功能梯度压电涂层内部的应力和电位移分布.研究结果表明,功能梯度压电材料参数的不同变化形式对结构的接触性能具有重要的影响.     

The contact problem when there are friction forces in the contact area for a three-component cylindrical base

The plane contact problem of elasticity theory on the interaction when there are friction forces in the contact area of an absolutely rigid cylinder (punch) with an internal surface of a cylindrical base, consisting of two circular cylindrical layers rigidly connected to one another and with an elastic space, is considered. The layers and space have different elastic constants. A vertical force and a counterclockwise torque, act on the punch, and the punch – base system is in a state of limiting equilibrium,. An exact integral equation of the first kind with a kernel represented in an explicit analytical form, is obtained for the first time for this problem using analytical calculation programs. The main properties of the kernel of the integral equation are investigated, and it is shown that the numerator and denominator of the kernel symbols can be represented in the form of polynomials in products of the powers of the moduli of the displacement of the layers and the half-space. A solution of the integral equation is constructed by the direct collocation method, which enables the solution of the problem to be obtained for practically any values of the initial parameters. The contact stress distributions, the dimensions of the contact area, the interconnection between the punch displacement and the forces and torques acting on it are calculated as a function of the geometrical and mechanical parameters of the layers and the space. The results of the calculations in special cases are compared with previously known results.     

A Two-dimensional Contact Problem with Given Region of Adhesion

The two-dimensional indentation of an elastic half-plane bya rigid punch under normal and tangential load is considered.The contact area is divided into an inner region with adhesion,the dimension of which is known beforehand, surrounded by tworegions in which inward slip takes place. The problem is formulatedin terms of a coupled pair of Cauchy type integrals for thenormal and shear stresses at the surface of the half-plane.In the case of friction-free slip these integrals are combinedto an inhomogeneous Fredholm equation which is solved by a methodof successive approximations. In the case when the inward slipis governed by Coulomb friction, the problem is solved by anumerical method.     

温差影响下的局部滑移接触行为的研究

针对不同温度装配件间接触界面的局部滑移问题,建立了三维稳态热弹性局部滑移接触的半解析求解模型.基于热弹性理论与热传导方程,构建了半空间受热流载荷和力载荷作用下的频响函数并建立了相应的影响系数矩阵.借助离散卷积-快速Fourier变换等数学工具,实现了针对高温压头与热弹性半空间局部滑移接触问题的高效求解.接触界面间的热量传递满足Fourier热传导定律,并且黏/滑状态由Coulomb定律确定.基于该半解析模型分析了不同荷载及温差对表面法向压力分布、摩擦力分布、刚体位移及接触区黏/滑演化行为的影响.研究结果表明,当法向荷载和切向荷载一定时,温差的上升会导致接触区域的减小,引起接触面法向压力及摩擦力的峰值增大,并且会显著影响黏着区与滑移区的分布情况.     

Singular integral equation method for contact problem for rigidly connected punches on elastic half-plane

In the contact problem of a rigid flat-ended punch on an elastic half-plane, the contact stress under punch is studied. The angle distribution for the stress components in the elastic medium under punch is achieved in an explicit form. From obtained singular stress distribution, the punch singular stress factor (abbreviated as PSSF) is defined. A fundamental solution for the multiple flat punch problems on the elastic half-plane is investigated where the punches are disconnected and the forces applied on the punches are arbitrary. The singular integral equation method is suggested to obtain the fundamental solution. Further, the contact problem for rigidly connected punches on an elastic half-plane is considered. The solution for this problem can be considered as a superposition of many particular fundamental solutions. The resultant forces on punches are the undetermined unknowns in the problem, which can be evaluated by the condition of relative descent between punches. Finally, the resultant forces on punches can be determined, and the PSSFs at the corner points can be evaluated. Numerical examples are given.     

The stress state of an elastic composite cone with centre of rotation at the apex

The torsion of a composite cone that has a centre of rotation at its apex is investigated in a spherical system of coordinates. A composite cone is a cone with one shear modulus, inserted into a conical funnel having another shear modulus and with ideal mechanical contact between its surface and the inner surface of the conical funnel. The auxiliary problem of a composite cone with its apex truncated by a spherical surface is considered first. The outer surface of such a conical body is not loaded, but a load that reduces to a torque is applied to its spherical surface. The auxiliary problem is reduced to a one-dimensional discontinuous boundary-value problem using a specially constructed integral transformation. The exact solution of this boundary-value problem is constructed. The limit is then taken in the solution obtained as the radius of the spherical surface tends to zero for the purpose of obtaining an exact solution of the problem of the torsion of a composite cone that has a centre of rotation at the apex.     

Hertzian contact in the presence of a Mindlin force

The smooth axisymmetric contact between a rigid spherical punch and an isotropic elastic halfspace is perturbed by an internally applied Mindlin force which is located along the axis of symmetry. The paper presents certain closed form solutions to this unilateral contact problem.     

The indentation of a spherical punch into an ideally plastic half-space when there is contact friction

Calculations are presented of the indentation of a spherical punch into an ideally plastic half-space under condition of complete plasticity and taking account of contact friction, which is modelled according to Prandtl and Coulomb. Friction leads to the formation of a rigid zone at the centre of the punch when there is slipping of the material on the remaining part of the contact boundary. Limit values of the friction coefficients are obtained for which the rigid zone extends over the whole of the contact boundary. The dependence of the indentation force on the radius of the plastic area is in good agreement with experimental data.     

Interaction of a rigid punch with a base-secured elastic rectangle with stress-free sides

The plane contact problem of the indentation of a rigid punch into a base-sucured elastic rectangle with stress-free sides is considered. The problem is solved by a method tested earlier and reduces to a system of two integral equations in functions describing the displacement of the surface of the rectangle outside the punch and the normal or shear stress on its base. These functions are sought in the form of the sum of trigonometric series and an exponential function with a root singularity. The ill-posed infinite systems of algebraic equations obtained as a result of this are regularized by introducing small positive parameters. Because the matrix elements of the systems, and also the contact stresses, are defined by poorly converging numerical and functional series, the previously developed method of summation of these series is used. The contact pressure distribution and the dimensionless indenting force are found. Examples of a plane punch calculation are given.     

The three-dimensional contact problem with friction for an elastic wedge

Solutions of three-dimensional boundary-value problems of the theory of elasticity are given for a wedge, on one face of which a concentrated shearing force is applied, parallel to its edge, while the other face is stress-free or is in a state of rigid or sliding clamping. The solutions are obtained using the method of integral transformations and the technique of reducing the boundary-value problem of the theory of elasticity to a Hilbert problem, as generalized by Vekua (functional equations with a shift of the argument when there are integral terms). Using these and previously obtained equations, quasi-static contact problems of the motion of a punch with friction at an arbitrary angle to the edge of the wedge are considered. In a similar way the contact area can move to the edge of a tooth in Novikov toothed gears. The method of non-linear boundary integral equations is used to investigate contact problems with an unknown contact area.     

The Reissner-Sagoci type problem for a non-homogeneous elastic cylinder embedded in an elastic non-homogeneous half-space

The problem considered is that of the torsion of a non-homogeneouselastic cylinder, which is embedded in a non-homogeneous elastichalf-space (matrix) of different rigidity modulus. A rigid discis bonded to the flat surface of the cylinder and torque isapplied to the cylinder through a rigid disc. It is assumedthat there is perfect bonding at the common cylindrical surface.Using integral transformation techniques the solution of theproblem is reduced to dual integral equations. Later on thesolution of the dual integral equations is transformed intothe solution of a Fredholm integral equation of the second kind.Solving the Fredholm integral equation numerically the numericalresults for torque and shear stress inside the cylinder areobtained and displayed graphically to demonstrate the effectof non-homogeneity of the elastic material on the torque andshear stress.     

Three-dimensional contact problems with friction for a composite elastic wedge

Contact problems for a composite elastic wedge in the form of two joined wedge-shaped layers with different aperture angles joined by a sliding clamp, where the layer under the punch is incompressible, are studied in a three-dimensional formulation. Conditions for a sliding or rigid clamp or the absence of stresses are set up on one face of the composite wedge. The integral equations of the problems are derived taking account of the friction forces perpendicular to the edge of the wedge. The method of non-linear boundary integral equations of the Hammerstein type is used when the contact area is unknown. A regular asymptotic solution is constructed for an elliptic contact area. By virtue of the incompressibility of the material of the layer in contact with the punch, this solution retains the well known root singularity in the boundary of the contact area when account is taken of friction.     

The impact of a plane punch on an elastic half-plane

The transient dynamic contact problem of the impact of a plane absolutely rigid punch on an elastic half-plane is considered. The solution of the integral equation of this problem in terms of the unknown Laplace transform of the contact stresses at the punch base is constructed by a special method of successive approximations. The solution of the transient dynamic contact problem is obtained after applying an inverse Laplace transformation to the solution of the integral equation over the whole time range of the impact process, and the law of the penetration of the punch into the elastic medium is determined from a Volterra-type integrodifferential equation. The conditions for the punch to begin to separate from the elastic half-plane are formulated from the solution obtained, and all the stages of the separation process are investigated in detail. The law of the punch motion on the elastic half-plane and the width of the contact area, which varies during the separation, are then determined from the solution of the Volterra-type integrodifferential equation when an additional condition is satisfied.     

Three-dimensional contact problems for an elastic wedge with a coating

Three-dimensional contact problems for an elastic wedge, one face of which is reinforced with a Winkler-type coating with different boundary conditions on the other face of the wedge, are investigated. A power-law dependence of the normal displacement of the coating on the pressure is assumed. The contact area, the pressure in this region, and the relation between the force and the indentation of a punch are determined using the method of non-linear boundary integral equations and the method of successive approximations. The results of calculations are analysed for different values of the aperture angle of the wedge, the relative distance of the punch from the edge of the wedge, the ratio of the radii of curvature of the punch (an elliptic paraboloid), and the non-linearity factors of the coating. The results obtained are compared with the solutions of similar problems for a wedge without a coating.     

An asymptotic method of solving transient dynamic contact problems of the theory of elasticity for a strip

An asymptotic method is proposed for solving transient dynamic contact problems of the theory of elasticity for a thin strip. The solution of problems by means of the integral Laplace transformation (with respect to time) and the Fourier transformation (with respect to the longitudinal coordinate) reduces to an integral equation in the form of a convolution of the first kind in the unknown Laplace transform of contact stresses under the punch. The zeroth term of the asymptotic form of the solution of the integral equation for large values of the Laplace parameter is constructed in the form of the superposition of solutions of the corresponding Wiener-Hopf integral equations minus the solution of the corresponding integral equation on the entire axis. In solving the Wiener-Hopf integral equations, the symbols of the kernel of the integral equation in the complex plane is presented in special form — in the form of uniform expansion in terms of exponential functions. The latter enables integral equations of the second kind to be obtained for determining the Laplace-Fourier transform of the required contact stresses, which, in turn, is effectively solved by the method of successive approximations. After Laplace inversion of the zeroth term of the asymptotic form of the solution of the integral equations, the asymptotic solution of the transient dynamic contact problem is determined. By way of example, the asymptotic solution of the problem of the penetration of a plane punch into an elastic strip lying without friction on a rigid base is given. Formulae are derived for the active elastic resistance force on the punch of a medium preventing the penetration of the punch, and the law of penetration of the punch into the elastic strip is obtained, taking into account the elastic stress wave reflected from the strip face opposite the punch and passing underneath it.     

Harmonic oscillations of a rigid punch on a porous elastic layer

The plane dynamic contact problem of the harmonic oscillations of a rigid punch on the free surface of an elastic layer of porous isotropic material with linear properties is considered. The Fourier transformation of the problem is reduced to a Fredholm integral equation of the first kind in the contact pressure. The properties of the kernel of the fundamental integral equation are investigated and a numerical method of solving it is constructed. Numerical results are compared with existing results in classical limiting cases.     

Solutions of half-space and half-plane contact problems based on surface elasticity

Analytical solutions for the problems of an elastic half-space and an elastic half-plane subjected to a distributed normal force are derived in a unified manner using the general form of the linearized surface elasticity theory of Gurtin and Murdoch. The Papkovitch–Neuber potential functions, Fourier transforms and Bessel functions are utilized in the formulation. The newly obtained solutions are general and reduce to the solutions for the half-space and half-plane contact problems based on classical linear elasticity when the surface effects are not considered. Also, existing solutions for the half-space and half-plane contact problems based on simplified versions of Gurtin and Murdoch’s surface elasticity theory are recovered as special cases of the current solutions. By applying the new solutions directly, Boussinesq’s flat-ended punch problem, Hertz’s spherical punch problem and a conical punch problem are solved, which lead to depth-dependent hardness formulas different from those based on classical elasticity. The numerical results reveal that smoother elastic fields and smaller displacements are predicted by the current solutions than those given by the classical elasticity-based solutions. Also, it is shown that the out-of-plane displacement and stress components strongly depend on the residual surface stress. In addition, it is found that the new solutions based on the surface elasticity theory predict larger values of the indentation hardness than the solutions based on classical elasticity.