Basic solutions of a 3D rectangular limited-permeable crack or two 3D rectangular limited-permeable cracks in the piezoelectric/piezomagnetic composite materials

The solutions of a three-dimensional rectangular limited-permeable crack or two three-dimensional rectangular limited-permeable cracks in the piezoelectric/piezomagnetic composite materials were investigated by using the generalized Almansi’s theorem and the Schmidt method. Finally, the relations among the electric field, the magnetic flux field and the stress field near the crack tips were obtained and the effects of the electric permittivity, the magnetic permeability of the air inside the crack, the shape of the rectangular crack on the stress, the electric displacement and magnetic flux intensity factors in the piezoelectric/piezomagnetic composite materials were analyzed.     

Analysis of laminated piezoelectric composite plates using an inverse hyperbolic coupled plate theory

This paper presents a non-polynomial coupled plate theory for smart composite structures employing inverse hyperbolic displacement and electric potential functions. The theory is utilized towards analysis of composite piezoelectric plates operating in sensor and actuator modes. Particularly, the following three cases are studied: (i) passive laminated composite structure, (ii) composite piezoelectric plate actuator and (iii) unimorph and bimorph piezoelectric plate sensors. Analytical solutions are obtained for simply supported plates under static electrical and mechanical loads. These results are validated with existing 3D elasticity solutions and compared with other plate theory solutions. Furthermore, parametric studies are performed to determine the effect of loading, span-to-thickness ratio and lamination sequence on the response of the piezoelectric plate. Finally, the theory is applied to a transverse shear sensing device which utilizes transverse shear-electric field coupling in piezoelectric materials. This effect is often ignored in literature.It is observed that the maximum percentage error of the present theory, when compared with 3D results, is less than 3%, which is lower than other higher order plate theories.     

Analytical solution for electromagnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder

Analytical study for electromagnetothermoelastic behaviors of a hollow cylinder composed of functionally graded piezoelectric material (FGPM), placed in a uniform magnetic field, subjected to electric, thermal and mechanical loads are presented. For the case that the electric, magnetic, thermal and mechanical properties of the material obey an identical power law in the radial direction, exact solutions for electric displacement, stresses, electric potential and perturbation of magnetic field vector in the FGPM hollow cylinder are determined by using the infinitesimal theory of electromagnetothermoelasticity. Some useful discussions and numerical examples are presented to show the significant influence of material inhomogeneity, and adopting a certain value of the inhomogeneity parameter β and applying suitable electric, thermal and mechanical loads can optimize the FGPM hollow cylindrical structures. This will be of particular importance in modern engineering design.     

Exact solution of thermal stress problem of an inhomogeneous hygrothermal piezoelectric hollow cylinder

The closed-form exact solution for the hygrothermal response of inhomogeneous piezoelectric hollow cylinders is obtained. The interaction of electric potentials, electric displacement and elastic deformations is presented. The present cylinder is subjected to both a mechanical load and an electric potential. The material properties coefficients of the present cylinder are assumed to be changed in the radial direction by different distribution forms. The field quantities like displacement, stresses and electric potentials in the inhomogeneous piezoelectric cylinders are determined. The significant of influences of material inhomogeneity, initial temperature, final moisture, and the load and electric ratios in the field quantities are investigated. The concluding remarks and suitable discussions are made.     

Modelling of multilayer transducer by means of the graph and structural numbers method

This paper presents the characteristics of piezoelectric plate vibration. Model of simple system were shown. The equations of piezoelectric plate have been derived in terms of longitudinal displacement and electric potential. Three ports system for investigated model was determined. Analysis was done by means the graph and structural numbers method. (© 2009 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A finite element model for nonlinear behaviour of piezoceramics under weak electric fields

It has been experimentally observed that piezoceramic materials exhibit different types of nonlinearities under different combinations of electric and mechanical fields. When excited near resonance in the presence of weak e to a Duffinor such as jump phenomena and presence of superharmonics in the response spectra. There has not been much work in the litrature to model these types of nonlinearities. Some authors have developed one-dimensional models for the above phenomenon and derived closed-form solutions for the displacement response of piezo-actuators. However, the generalized three-dimensional (3-D) formulation of electric enthalpy, the variational formulation and the FEM implementation have not yet been addressed, which are the focus of this paper. In this work, these nonlinearities have been modelled in a 3-D piezoelectric continuum using higher order quadratic and cubic terms in the generalized electric enthalpy density function. The coupled nonlinear finite element equations have been derived using variational formulation. A special linearization technique for assembling the nonlinear matrices and solution of the resulting nonlinear equations has been developed. The method has been used for simulating the nonlinear frequency response of a lead zirconate titanate plate excited near its first in-plane vibration resonance frequency with sinusoidal excitations of different electric field strengths. The results have been compared with those of the experiment.     

A Yoffe-type moving crack in one-dimensional hexagonal piezoelectric quasicrystals

A Yoffe-type moving crack in one-dimensional hexagonal piezoelectric quasicrystals is considered. The Fourier transform technique is used to solve a moving crack problem under the action of antiplane shear and inplane electric field. Full elastic stresses of phonon and phason fields and electric fields are derived for a crack running with constant speed in the periodic plane. Obtained results show that the coupled elastic fields inside piezoelectric quasicrystals depend on the speed of crack propagation, and exhibit the usual square-root singularity at the moving crack tip. Electric field and phason stresses do not have singularity and electric displacement and phonon stresses have the inverse square-root singularity at the crack tip for a permeable crack. The field intensity factors and energy release rates are obtained in closed form. The crack velocity does not affect the field intensity factors, but alters the dynamic energy release rate. Bifurcation angle of a moving crack in a 1D hexagonal piezoelectric quasicrystal is evaluated from the viewpoint of energy balance. Obtained results are helpful to better understanding crack advance in piezoelectric quasicrystals.     

A 1D constitutive law for hysteresis effects in piezoceramics

This paper is concerned with a macroscopic constitutive law for domain switching effects, which occur in piezoelectric ceramics. The thermodynamical framework of the law is based on two scalar valued functions: the Helmholtz free energy and a switching surface. In common usage, the remanent polarization and the remanent strain are employed as internal variables. The novel aspect of the present work is to introduce an irreversible electric field, which serves besides the irreversible strain as internal variable. The irreversible electric field has only theoretical meaning, but leads to advantages within the finite element implementation, where displacement and the electric potential are the nodal degrees of freedoms. A common assumption is a one-to-one relation between the irreversible strain and the polarization. This simplification is not employed in the present paper. To accomplish enough space for the polarization, resulting from an applied electric field, the irreversible strains are additively split and a special hardening function is introduced. This balances the amount of space and the domain switching due to polarization. The constitutive model reproduces the ferroelastic and the ferroelectric hysteresis as well as the butterfly hysteresis for piezoelectric ceramics and it accounts for the mechanical depolarization effect. (© 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

含椭圆形夹杂的压电材料平面问题

应用复变函数的Ｆａｂｅｒ级数展开方法，本文研究了含椭圆形夹杂的压电材料平面问题，给出了问题的封闭解·解答表明，椭圆夹杂内的应力、应变、电场强度和电位移均为常量·通过算例，还讨论了正、逆压电效应在基体孔周处的机电行为·     

Strip saturation model solution for a piezoelectric plate by linearly varying electrical loads under mode-I conditions

A strip saturation model solution is obtained for a poled cracked piezoelectric ceramic plate. The plate is cut along a straight finite hair line crack whose rims are perpendicular to the poling axis of the plate. A mechanical load and an electric field applied open the rims of the crack and, as a result, saturation zones develop ahead of its tips. To arrest the crack from further opening, a linearly varying saturation limit normal electrical displacement is prescribed on rims of the saturation zones. The technique of complex variables is used to obtain the solution to the problem. A case study is presented for PZT-4, PZT-5, and PZT-7 ceramics. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 45, No. 1, pp. 85–92, January–February, 2009.     

Transient response of two collinear dielectric cracks in a piezoelectric solid under inplane impacts

The paper is focused on the dynamic analysis of two collinear dielectric cracks in a piezoelectric material under the action of in-plane electromechanical impacts. Considering the dielectric permeability of crack interior, the electric displacements at the crack surfaces are governed by the jumps of electric potential and crack opening displacement across the cracks. The permeable and impermeable crack models are the limiting cases of the general one. The Laplace and Fourier transform techniques are further utilized to solve the mixed initial-boundary-value problem, and then to obtain the singular integral equations with Cauchy kernel, which are solved numerically. Dynamic intensity factors of stress, electric displacement and crack opening displacement are determined in time domain by means of a numerical inversion of the Laplace transform. Numerical results for PZT-5H are calculated to show the effects of the dielectric permeability inside the cracks, applied electric loadings and the geometry of the cracks on the fracture parameters in graphics. The observations reveal that based on the COD intensity factor, a positive electric field enhances the dynamic dielectric crack growth and a negative one impedes the dynamic dielectric crack growth in a piezoelectric solid.     

压电介质内裂纹问题的精确解

在压电介质断裂力学分析中,人们常假定裂纹面上的电位移法向分量为零,可是实验表明,这一假设将导致错误的结果。本文基于精确的电边界条件,并应用Stroh公式的方法,导出了含裂纹压电介质在无限远处均匀外载作用下二维问题的精确解。结果表明:(ⅰ)应力强度因子与各向同性材料相同,而电位移强度因子取决于材料常数和机械载荷,但与电载荷无关;(ⅱ)能量释放率大于纯弹性各向异性材料内的值,即总是正的,且与电载荷无关;(ⅲ)裂纹内所含空气的介电常数对介质内的场强无影响。     

Free vibration analysis of piezoelectric coupled annular plates with variable thickness

This paper presents the free vibration analysis of piezoelectric coupled annular plates with variable thickness on the basis of the Mindlin plate theory. No work has yet been done on piezoelectric laminated plates while the thickness is variable. Two piezoelectric layers are embedded on the upper and lower surfaces of the host plate. The host plate thickness is linearly increased in the radial direction while the piezoelectric layers thicknesses remain constant along the radial direction. Different combinations of three types of boundary conditions i.e. clamped, simply supported, and free end conditions are considered at the inner and outer edges of plate. The Maxwell static electricity equation in piezoelectric layers is satisfied using a quadratic distribution of electric potential along the thickness. The natural frequencies are obtained utilizing a Rayleigh–Ritz energy approach and are validated by comparing with those obtained by finite element analysis. A good compliance is observed between numerical solution and finite element analysis. Convergence study is performed in order to verify the numerical stability of the present method. The effects of different geometrical parameters such as the thickness of piezoelectric layers and the angle of host plate on the natural frequencies of the assembly are investigated.     

A Piezoelectric Finite Shell Element for the Geometrically Nonlinear Analysis of Sensors

A geometrically nonlinear finite element formulation to analyze piezoelectric shell structures is presented. The formulation is based on the mixed field variational functional of Hu–Washizu. Within this variational principle the independent fields are displacements, electric potential, strains, electric field, stresses and dielectric displacements. The mixed formulation allows an interpolation of the strains and the electric field through the shell thickness, which is an essential advantage when using a three dimensional material law. It is remarked that no simplification regarding the constitutive relation is assumed. The normal zero stress condition and the normal zero dielectric displacement condition are enforced by the independent resultant stress and resultant dielectric displacement fields. The shell structure is modeled by a reference surface with a four node element. Each node possesses six mechanical degrees of freedom, three displacements and three rotations, and one electrical degree of freedom, which is the difference of the electric potential through the shell thickness. The developed mixed hybrid shell element fulfills the in–plane, bending and shear patch tests, which have been adopted for coupled field problems. A numerical investigation of a smart antenna demonstrates the applicability of the piezoelectric shell element under the consideration of geometrical nonlinearity. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Non-local theory solution of two collinear mode-I cracks in piezoelectric materials

In this paper, the basic solution of two collinear cracks in a piezoelectric material plane subjected to a uniform tension loading is investigated by means of the non-local theory. Through the Fourier transform, the problem is solved with the help of two pairs of integral equations, in which the unknown variables are the jumps of displacements across the crack surfaces. To solve the integral equations, the jumps of displacements across the crack surfaces are directly expanded in a series of Jacobi polynomials. Numerical examples are provided to show the effects of the interaction of two cracks, the materials constants and the lattice parameter on the stress field and the electric displacement field near crack tips. Unlike the classical elasticity solution, it is found that no stress and electric displacement singularities are present at crack tips. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing us to using the maximum stress as a fracture criterion in piezoelectric materials.     

含椭圆形夹杂的压电体平面应变问题

利用复变函数理论,对在无限远处均匀应力和电位移载荷作用下的含有椭圆形弹性夹杂的横观各向同性压电材料,作了力电分析．在该文有限元结果和前人相关理论解的基础上,提了出一个可接受的认为弹性夹杂体内的应力场为常应力场的假设．在采用了不导通电边界条件之后,获得了以复势形式表示的压电基体的和弹性夹杂体内部的应力场解．     

Strip electro-mechanical yielding model for piezoelectric plate cut along two equal collinear cracks

The multiple-crack problems for piezoelectric ceramics till now have not yet address the crack opening arrest problem. The present work addresses this paucity. A 2-D strip-electro-mechanical yielding model is proposed for a transversely isotropic piezoelectric media weakened by two internal equal collinear straight cracks. The infinite boundary is prescribed with combined uniform constant in-plane mechanical and electrical loads. Developed mechanical and electric strip zones are arrested by prescribing over their rims uniform, normal, cohesive yield point stress and saturation limit electric displacement. Two cases are considered when saturation zone is bigger than developed yield zone and vice versa. Stroh formulation together with complex variable technique is employed to obtain the solution. Closed form expressions are derived for saturation zone length, yield zone length, crack opening displacement (COD), crack opening potential jump (COP) and energy release rate (ERR). An illustrative numerical study is prescribed to determine the effect of various parameters on the crack growth arrest and presented graphically. The results reveal that the model is capable of crack arrest under small-scale mechanical and electric yielding.     

Piezoelectric beams under small strains but large displacements and rotations

Small strains are consistently incorporated into a model to describe the behavior of piezoelectric beams subjected to large displacements and rotations. While the displacement is assumed to vary in accordance with the Timoshenko assumption, the electric potential has linear variation through each piezoelectric layer thickness. The strong geometric nonlinear effect on the beam electroelastic response is illustrated by static problems of cantilever beams with tip loads and distributed sensing or actuation. The present work seems to be the first to obtain analytical solutions for beams under large displacements and rotations with piezoelectric sensors. One believes that the quality of such solutions can be valuable to validate results predicted by approximate methods.     

不同功能梯度压电压磁层状介质中共线界面裂纹的动态性能分挝

对不同功能梯度压电压磁层状介质中,共线界面裂纹对简谐应力波作用下的动态问题,进行了分析.经Fourier变换,使问题的求解转换为求解以裂纹面上位移间断为未知量的三重对偶积分方程,三重对偶方程可以采用Schmidt方法来求解,进而分析了功能梯度参数、入射波频率和层状介质厚度对应力、电位移和磁通量强度因子的影响.     

夹层压电材料中垂直于界面的共线双裂纹动力学问题分析

采用Schmidt方法分析了在简谐反平面剪切波作用下,两个半空间夹层压电材料中的共线裂纹的动力学行为．压电材料层内裂纹垂直于界面,电边界条件假设为可导通．通过Fourier变换,使问题的求解转换为两对三重积分对偶方程．通过数值计算,给出了裂纹的几何尺寸、压电材料常数、入射波频率等对于应力强度因子的影响．结果表明,在不同的入射波频率范围,动力场将阻碍或促使压电材料内裂纹的扩展．与不可导通电边界条件相比,导通裂纹表面的电位移强度因子比不可导通裂纹的电位移强度因子要小许多．