Synthesis of Fe3O4, Fe2O3, Ag/Fe3O4 and Ag/Fe2O3 nanoparticles and their electrocatalytic properties

Two important iron oxides:Fe3O4 and Fe2O3,as well as Fe3O4 and Fe2O3 nanoparticles mingling with Ag were successfully synthesized via a hydrothermal procedure.The samples were confirmed and characterized by X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The morphology of the samples was observed by transmission electron microscopy(TEM).The results indicated Fe3O4,Fe2O3,Ag/Fe3O4 and Ag/Fe2O3 samples all were nanoparticles with smaller sizes.The samples were modified on a glassy carbon electrode and their elctrocatalytic properties for p-nitrophenol in a basic solution were investigated.The results revealed all the samples showed enhanced catalytic performances by comparison with a bare glassy carbon electrode.Furthermore,p-nitrophenol could be reduced at a lower peak potential or a higher peak current on a glassy carbon electrode modified with Ag/Fe3O4 or Ag/Fe2O3 composite nanoparticles.     

α-Fe_2O_3-TiO_2/SA复合半导体薄膜的制备及光催化性能的研究

应用sol gel法制备纳米α Fe2O3、TiO2及α Fe2O3 TiO2粉体,并以其作前驱体制得该纳米微粒与海藻酸钠的复合膜.由红外光谱(FT IR)、X 射线粉末衍射(XRD)、荧光光谱(PL)、透射电子显微镜(TEM)和循环伏安(I V)等物理化学方法表征、测定各复合薄膜的表面结构与催化活性.紫外 可见吸光光度法等研究结果表明,以杀菌紫外灯作光源,在纳米Fe2O3、TiO2及α Fe2O3 TiO2与海藻酸钠的复合膜悬浮液中,亚甲基蓝可被快速脱色降解,若于α Fe2O3中加入15%的TiO2,其α Fe2O3 TiO2复合晶体比单一的α Fe2O3或TiO2具有更高的光降解活性.     

十二烷基苯磺酸钠微乳体系制备纳米Fe2O3

十二烷基苯磺酸钠微乳体系制备纳米Fe2O3;微乳;电导率;萃取率;纳米Fe2O3     

尿素水解法制备球形磁性Al2O3复合材料

利用酸化法在磁性Fe3O4纳米粒子表面包覆SiO2膜,制备了Fe3O4/SiO2复合粒子。然后将该复合粒子超声分散在尿素和铝盐的混合溶液中,利用油中成型法制备出球形纳米磁性Al2O3复合材料,通过水热焙烧等工序处理得γ-Al2O3。实验中采用XRD、TEM、BET、AGM等方法对复合粒子的性能进行了表征,探讨了制备过程对产物晶型的影响、产物的孔结构变化和磁学性能。另外添加的SiO2膜阻止了磁性Fe3O4纳米粒子的进一步团聚,使得Fe3O4纳米粒子保持较小尺寸并均匀分散在产物中,复合材料表现出超顺磁性;同时SiO2膜防止了磁核部分与Al2O3包覆层在高温焙烧时发生反应;还起到加强粘结的作用,使得Al2O3在使用过程中不容易脱落。     

Fe3O4／TiO2磁性催化剂的制备及在污水治理中的应用

以纳米Fe3O4为载体,以钛酸四丁酯为前躯体,用溶胶-凝胶法在Fe3O4表面包覆TiO2层,制备Fe3O4／TiO2光催化材料．透射电镜（TEM）、X射线衍射（XRD）、X射线光电子能谱（XPS）和红外光谱（IR）分析表明,TiO2在纳米Fe3O4颗粒表面形成很好的包覆层．用Fe3O4／TiO2光催化材料对工业上难处理...     

光催化材料Cu/Fe2O3-TiO2的结构和性能

光催化材料Cu/Fe2O3-TiO2的结构和性能;复合半导体;Cu/Fe2O3-TiO2;光催化材料;光响应性能     

Fe2O3/YSZ-γ-Al2O3催化剂在甲烷催化燃烧中的催化性能研究

以Fe2O3为活性组分，γ-Al2O3，ZrO2-γ—Al2O3及YSZ—γ—Al2O3(YSZ是用Y2O3稳定ZrO2的催化剂载体)为载体，制备了3种甲烷燃烧催化剂．其中以YSZ—γ—Al2O3为载体的催化剂催化性能最好．XPS检测发现．ZrO2和Y2O3的存在可以增加和稳定Fe2O3的表面浓度，同时也可减弱Fe2O3与γ—Al2O3之间的相互作用．Fe2O3质量分数为10％的Fe2O3／YSZ—γ—Al2O3催化剂具有最佳的催化活性．XRD测试结果表明．该催化剂的活性与Fe2O3在载体上的分散状况有关．     

USP制备高光电活性Ti掺杂Fe2O3薄膜

本文报道了采用超声喷雾裂解法(USP)法制备α-Fe2O3以及不同厚度的Ti掺杂α-Fe2O3薄膜,并通过XRD、XPS、SEM、IPCE表征了合成的薄膜。XRD测试结果表明,Ti掺杂和纯相Fe2O3均为α相并在(110)晶面优先生长;从AFM图中看出Fe2O3晶粒呈尖峰状垂直于平面排列;由XPS分析得知Ti离子在Fe2O3薄膜中以Ti4+和Ti3+两个价态存在;由光电效率表征可知,吸收光电转换效率(APCE)值是随着样品薄膜厚度增加而减小,在厚度为20nm时APCE为58%,对于粉末Fe2O3光催化材料是粒径尺寸越小光利用率越高;然而Fe2O3薄膜的IPCE值在厚度为60nm时最高达到23.5%,此时光利用效率最大。     

二氧化钛和三氧化二铁复合纳米晶电极的光电化学性质

研究了以不同方式相互修饰的Fe2 O3和TiO2 纳米晶电极的光电化学行为 (包括离子的相互掺杂 ) .在不同的入射光波长下 ,瞬态光电流谱显示Ti4 掺杂的Fe2 O3电极呈现n型半导体的特性(阳极光电流 ) ;以不同方式经Fe2 O3包覆的TiO2 电极由于能级的不匹配 ,在整个的波长测量范围内没有光响应 ;而对Fe3 离子掺杂的TiO2 电极和经TiO2 修饰 (包覆或偶联 )的Fe2 O3纳米晶电极则呈现出p n共存特性 ,甚至个别的电极表现出纯粹的p型半导体的特性 .这些现象可以从p型微区的形成得到解释 .     

纳米化Fe2O3粉体的制备与表征

采用分析纯FeCl3·6H2O和NH3·H2O为主要原料,以均匀沉淀法制备了Fe2O3纳米粉体.通过X射线衍射(XRD)、红外光谱(IR)、扫描电子显微镜(SEM)及差热分析(DTA)等手段研究了热处理温度、分散剂、反应pH值对Fe2O3相变、结构、形貌及纳米属性的影响.结果表明:纳米化增大了Fe2O3的表面能,γ-Fe2O3转变为α-Fe2O3的温度仅为238.2 ℃,比常规粉体降低了约312 ℃;由于量子尺寸效应和表面效应,使用分散剂后α-Fe2O3纳米粉体的分散性、均匀性得到改善,粒径下降,Fe-O键伸缩及弯曲振动IR吸收频率发生蓝移;尤其是硬脂酸钠分散后α-Fe2O3的Fe-O伸缩、弯曲振动吸收频率分别蓝移11.57、10.93 cm-1;获得了液相均匀沉淀法制备Fe(OH)3纳米粉体的最佳工艺条件.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.