复合型螯合吸附材料PEI/SiO2对铜离子吸附性能的研究

通过γ-氯丙基三甲氧基硅烷的媒介, 将聚乙烯亚胺(PEI)偶联接枝到硅胶微粒表面, 制备了复合型螯合吸附材料PEI/SiO2;研究了PEI/SiO2对Cu2 的吸附性能. 复合型螯合吸附材料PEI/SiO2对Cu2 具有强的螯合吸附能力;等温吸附数据符合Langmuir方程, 且吸附量随温度升高而增大;pH对吸附量有很大的影响, pH 7时, 吸附量最高.     

螯合吸附材料PAO/SiO_2对重金属离子的螯合吸附行为

将丙烯腈接枝聚合在微米级硅胶微粒表面,经偕胺肟化转变,制得了接枝有聚偕胺肟(PAO)的复合型螯合吸附材料PAO/SiO2。本文重点考察了螯合吸附材料PAO/SiO2对几种重金属离子的螯合吸附行为,深入地研究了吸附机理。研究结果表明,偕胺肟基团与重金属离子之间的静电作用与配位螯合作用的协同,导致PAO/SiO2对重金属离子产生强的螯合吸附作用。在可抑制金属离子水解的pH范围内,介质的pH值越高,PAO/SiO2的螯合吸附能力越强;PAO/SiO2对性质不同的金属离子的吸附性能是有差别的,吸附容量的顺序为Cu2+Ni2+Pb2+Cd2+。     

水杨酸型螯合吸附材料对重金属离子的吸附性能

将5-氨基水杨酸接枝到PGMA/SiO2微粒的聚甲基丙烯酸缩水甘油酯(PGMA)大分子链上,成功制备了一种新型螯合吸附材料ASA-PGMA/SiO2。采用静态法研究了ASA-PGMA/SiO2对重金属离子Cu2+、Cd2+、Zn2+、Pb2+的吸附性能,结果表明其对Cu2+、Cd2+、Zn2+、Pb2+具有很强的螯合吸附能力,吸附容量分别可以达到0.42、0.40、0.35、0.31mmol/g。体系的pH对吸附容量影响较大,吸附行为服从Langmuir和Freundlich吸附模型。使用0.1mol/L的盐酸溶液就可实现重金属离子的解吸。通过反复吸附-解吸实验证明ASA-PGMA/SiO2具有良好的重复使用性能。     

硅胶表面铜(Ⅱ)离子印迹聚乙烯亚胺的制备及结合特性研究

通过γ-氯丙基三甲氧基硅烷的媒介,将聚乙烯亚胺(PEI)偶合接枝到硅胶微粒表面,形成了化学键联的复合材料PEI/SiO2;以Cu2+为模板离子,以环氧氯丙烷为交联剂,通过配位键作用,对化学键合在硅胶表面的PEI大分子链进行了离子印迹,制备了复合型Cu2+印迹材料IIP-PEI/SiO2;采用静态与动态两种方法研究了IIP-PEI/SiO2对Cu2+的结合特性,并考察了主要印迹条件Cu2+浓度及环氧氯丙烷用量对印迹材料吸附性能的影响.结果表明,Cu2+印迹材料IIP-PEI/SiO2对Cu2+具有强的记忆识别能力,主要表现在两个方面,(1)对Cu2+的结合量大,IIP-PEI/SiO2对Cu2+的吸附容量比印迹前复合材料PEI/SiO2提高了近2倍;(2)对Cu2+的选择性高,相对于Cd2+,IIP-PEI/SiO2对Cu2+的选择性系数为83.79,相对于Zn2+,IIP-PEI/SiO2对Cu2+的选择性系数为80.21.另外印迹材料IIP-PEI/SiO2具有优良的洗脱与再生性能.     

乙二胺硅胶复合材料对Zn2+的吸附特性

以γ-氯丙基三氯硅烷为偶联剂,将乙二胺偶合接枝在硅胶表面,合成对锌离子具有吸附作用的乙二胺硅胶复合材料（EDA/SiO2）,考察了Zn2+溶液pH值、初始浓度、吸附温度和吸附时间等因素对复合材料吸附性能的影响。 结果表明,在研究的溶液浓度及温度范围内,Zn2+溶液pH值对EDA/SiO2的吸附量影响显著,吸附的最佳pH值范围在3.0~5.5;Zn2+的吸附平衡数据符合Langmuir吸附模型,热力学数据显示,EDA/SiO2对Zn2+的吸附行为为一吸热且自发进行的过程,升高温度有利于吸附,并对此吸附行为作了解释;吸附动力学数据可用拟二级吸附动力学方程描述,得到的吸附速率常数与溶液初始浓度有关。     

水溶性聚胺PEI与铜离子螯合物结构的测定及其分析应用

使用分光光度法与电导滴定法研究了聚乙烯亚胺（PEI）与Cu^2＋的配合过程,测定了二者所形成的螯合物结构。Cu^2＋与水溶性聚胺PEI可以定量地形成四配位螯合物,而且配合过程速度很快,螯合物稳定;在用PEI水溶液滴定Cu^2＋过程中,体系的电导率快速下降,在滴定终点电导率发生了清晰的转变。建立了测定Cu^2＋的一种新方法-PEI螯合作用电导滴定法,考察了各种因素对分析方法的影响,优化了分析条件。     

PEI/SiO2复合型吸附材料对脲酸吸附特性的研究

通过γ-氯丙基三甲氧基硅烷的偶联, 将聚乙烯亚胺(PEI)偶合接枝在硅胶微粒表面, 制得了对脲酸有强吸附性能的复合型医用吸附材料PEI/SiO₂. 静态吸附实验结果表明, 凭借强烈的氢键相互作用, 硅胶表面的聚胺大分子PEI对脲酸的互变异构体三羟基嘌呤具有很强的吸附能力, 等温吸附满足Freundlich吸附方程, 饱和吸附量可达84.9 mg/g; 介质的pH值对吸附作用有很大的影响, 在中性溶液中(pH＝6～7), 复合吸附材料PEI/SiO₂对脲酸具有强吸附能力, 而在酸性与碱性溶液中吸附能力都较弱; 温度对吸附性能也有影响, 升高温度吸附量增大.     

接枝微粒PMAA/SiO2在水介质中对杀虫剂抗蚜威的吸附机理

以硅胶表面接枝聚甲基丙烯酸(PMAA)的复合型功能微粒PMAA/SiO2为固体吸附剂, 对水介质中的抗蚜威进行了静态吸附实验, 通过考察温度、pH值及盐度(NaCl浓度)对吸附容量的影响, 重点研究了PMAA/SiO2对抗蚜威的吸附机理. 为确认所提出的机理的正确性, 还采用紫外光谱吸收法, 研究了单体甲基丙烯酸与抗蚜威之间的相互作用, 也考察了在非水介质CCl4中PMAA/SiO2对抗蚜威的吸附作用. 研究结果表明, PMAA/SiO2对抗蚜威具有强的吸附作用, 吸附的驱动力是氢键、静电以及疏水相互作用三种作用的协同, 其中主驱动力是静电相互作用. 温度升高, 吸附容量减小; 盐度增大, 吸附容量降低; 当pH<8时, 吸附容量随pH升高而增大; 当pH>8时, 吸附容量随pH升高而减小; 当pH=8 时,吸附容量最大.     

亚氨二乙酸型复合材料IDAA-PGMA/SiO2对重金属及稀土离子的吸附行为与吸附热力学

将甲基丙烯酸缩水甘油酯(GMA)接枝于硅胶微粒表面,制得了接枝微粒PGMA/SiO₂; 使亚氨二乙酸(IDAA)与接枝PGMA的环氧基团发生开环反应, 从而将亚氨二乙酸基团引入接枝微粒表面, 制得了复合螯合微粒材料IDAA-PGMA/SiO₂. 本文研究了IDAA-PGMA/SiO₂对重金属及稀土离子的螯合吸附行为, 深入地研究了吸附机理与吸附热力学. 研究结果表明: 凭借亚氨二乙酸基团与重金属离子之间的静电作用与配位螯合作用的协同, 复合微粒材料IDAA-PGMA/SiO₂对重金属离子可产生强的螯合吸附作用, 尤其对Pb²⁺离子表现出很强的螯合吸附能力, 常温下吸附容量可达0.235 g·g^-1; IDAA-PGMA/SiO₂对重金属离子的吸附过程为一放热过程, 且为焓驱动的过程, 升高温度, 吸附容量降低; 对稀土离子的吸附过程则为熵驱动的过程; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, IDAA-PGMA/SiO₂的螯合吸附能力越强; IDAA-PGMA/SiO₂对重金属离子的吸附容量远高于对稀土离子的吸附容量.     

水杨酸型螯合树脂对Fe(III)离子的螯合吸附行为

以5-氨基水杨酸(ASA)为胺化试剂, 使氯甲基化的交联聚苯乙烯(CMCPS)微球表面的苄氯基团发生亲核取代反应, 制得了水杨酸型螯合树脂ASA-CPS. 研究了该螯合树脂对金属离子的螯合吸附行为, 探讨了其吸附热力学与吸附机理, 考察了介质pH值对树脂螯合吸附性能的影响以及树脂对不同金属离子的螯合吸附能力. 实验结果表明, 水杨酸型螯合树脂ASA-CPS 对重金属离子具有强螯合吸附性能, 尤其对Fe3+离子表现出很强的螯合吸附能力, 常温下吸附容量可达21 g/100 g. 吸附过程属熵驱动的化学吸附过程, 升高温度, 吸附容量增高; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, 螯合吸附能力越强; 对于性质不同的金属离子, ASA-CPS的吸附性能是有差别的, 吸附容量的顺序为Fe3+>Ni2+>Cu2+>Zn2+.     

Direct Determination of Cu2+ Based on the Electrochemical Catalytic Reaction of Fe3+/Cu2+

Copper ion (Cu²⁺) is one of the heavy metal ions which has been considered as a severe pollutant affecting the environment and human health. Therefore, it is necessary to detect Cu²⁺ sensitively and conveniently in food and drinks. However, the gold standard method that inductively coupled plasma mass spectrometry (ICP‐MS) is expensive equipment required and time‐consuming. In this work, a highly sensitive and facile electrochemical method was studied to directly determine the concentration of Cu²⁺ without cumbersome modification on the surface of glassy carbon electrode (GCE). In the presence of ferric ion (Fe³⁺), Cu²⁺ could play a role of catalyst in the detection system, and the electrochemical signal of differential pulse voltammetry (DPV) response to Cu²⁺ could be amplified obviously. Under the optimal conditions, a good linear relationship was obtained in the range of 1 nM to 5 μM with a detection limit of 57.5 pM (S/N=3) were obtained. Besides, the proposed method has good applicability for the detection of Cu²⁺ in tap water. Furthermore, the copper complex was detected and the results were indicated the proposed method was effective and sensitive.     

钾离子浓度依赖的铅离子稳定G-四链体构型转化

已有研究普遍认为铅离子(Pb²⁺)诱导富G适体链形成的G-四链体(Pb²⁺-G4)比钾离子(K⁺)诱导富G适体链形成的G-四链体(K⁺-G4)更为稳定,因而Pb²⁺可以置换K⁺-G4中的K⁺,而且K⁺的存在不影响Pb²⁺-G4的稳定性。有趣的是本研究发现K⁺ (20 μmol∙L⁻¹–1 mmol∙L⁻¹)不仅可以诱导10 µmol∙L⁻¹ Pb²⁺稳定的T2TT(Pb²⁺-T2TT,杂合G4结构)发生构型转换,甚至还可取代Pb²⁺-T2TT中的Pb²⁺,形成K⁺稳定的T2TT (K⁺-T2TT,平行G4结构),最终转化形成的K⁺-G4结构与单独K⁺诱导富G适体链形成K⁺-G4的构型基本一致。随后,进一步考察了另外7条富G适体链,发现这一转化过程具有一定的普适性。该研究结果为理解G4构型转化以及内嵌离子交换提供了新的视角,也为拓展G4在生化分析和生物领域的应用提供了新的理论基础。     

巯基壳聚糖富集火焰原子吸收光谱法测定天然水体中Pb2+和Cd2+ 的研究

利用自己研制的巯基壳聚糖对Pb^2 和Cd^2 具有良好的吸附效果这一特性，建立了巯基壳聚糖分离富集原子吸收光谱法测定天然水体中Pb^2 和Cd^2 的新方法，研究了最佳吸附和脱附条件，该法对Pb^2 和Cd^2 的准确检测下限可达到1.00μg/L和0.050μg/L。回收率分别达到96.5%和97.6%。该法灵敏度高，选择性好，用于实际水样的测定取得了满意的。     

A highly selective fluorescent sensor for Ca2+ and Sr2+ based on diarylethene with a furan-carbohydrazide unit

A fluorescent sensor based on diarylethene has been designed and synthesized. The sensor not only exhibited excellent photochromic properties, but also has distinguishing ability for Ca²⁺ and Sr²⁺ from other metal ions. Upon addition of Ca²⁺ and Sr²⁺, its emission intensity enhanced 27-fold and 24-fold respectively, accompanied by the emission peak shifted from 439 nm to 484 nm for Ca²⁺, and to 479 nm for Sr²⁺. The 1:1 stoichiometry between the sensor and the two ions was confirmed by Job's plot and HRMS. The LOD for Ca²⁺ and Sr²⁺ was determined to be 9.4 × 10^?8 mol L^?1 and 7.2 × 10^?8 mol L^?1, respectively. Furthermore, the sensor was applied in the detection of Ca²⁺ and Sr²⁺ in practical samples successfully.     

Different binding thermodynamics of Ni2+, Cu2+, and Zn2+ to bacitracin A1 determined by capillary electrophoresis

Thermodynamics of the binding of Ni(2+), Cu(2+) and Zn(2+) to bacitracin A(1) was studied by capillary electrophoresis measuring the peptide effective mobility at different pH in the presence of increasing concentration of the three ligands. The affinity follows the order Ni(2+) > Cu(2+) > Zn(2+), with association constant values of (2.3 +/- 0.1)x10(4), (4.9 +/- 0.2)x10(3), and (1.5 +/- 0.1)x10(3) M(-1), respectively. The only model able to rationalize mobility data implies that metal ion binds to the P(0) peptide form. Moreover, mobility values indicated a change of bacitracin A(1) acidic properties on Ni(2+) and Cu(2+) binding, with a shift of the pK(a) of N-terminal Ile-1 from 7.6 to about 5 and of the pK(a) of the delta-amino group of D-Orn-7 from 9.7 to about 7. Even though on Zn(2+) binding a shift of the N-terminal Ile-1 pK(a) was observed, restrictions in the pH range suitable for investigation, due to precipitation phenomena, did not allow establish if the shift of D-Orn-7 lateral chain pK(a) also occurred. Nonetheless, if present, the shift should be limited to the 7.8-9.7 range. Mobility data indicated that the Stokes radius of the complexes is ca. 3 A lower than that of the free peptide. The present results indicate that metal-ion binding to bacitracin A(1) is more complex than previously assumed.     

金属硫蛋白与Cd2+、Pb2+络合反应的微量量热滴定

Metallothionein, a class of low molecular weight, metal- and cysteine-rich Proteins, are postulated to play a central role in metal-related biological processes such as the detoxification of Cd2+and Pb2+. The thermal Properties of the interactions of rabbit liver Zn_7MT2 and apo-MT2 with Cd2+ and Pb2+ were studied using isothermal titration calorimeter. The same product Cd_7MT formed in the reactions of Cd2+ with Zn_7MT2 and apo-MT2, while the reactions of Ph2+ with Zn_7MT2 and apo-MT2 Produced two MT species Ph_7MT and Ph_7MT'. The thermodynamic parameters (△H、 △G、 △S, etc. ) for the reactions of MT with 1 mol metal ions were measured at 293.15 K, pH 4.70. All of these reactions are spontaneous, exothermic processes. The values of △G and K show that Cd2+ is more affinitive to MT than Ph2+. The equilibrium constants K of the replacement reactions of Zn_7MT2 by 1 mol Cd2+ and Pb2+ are 2. 7×105 and 1. 3×105 respectively, that means the concentrations of free Cd2+ and Pb2+ are depressed to about 1. 0×10-5 after the reactions with Zn_7MT2. These data can be used to evaluate quantitatively the ability of MT in Cd2+ and Pb2+ detoxificatio.     

pH电位滴定法测定溶液中钙、镁离子与聚天冬氨酸的生成稳定常数

pH电位滴定法测定溶液中钙、镁离子与聚天冬氨酸的生成稳定常数;pH电位滴定;聚天冬氨酸;配位化学;钙离子;镁离子     

碱性水溶液中BR-M~(2+)(Zn~(2+),Cu~(2+))体系的光谱性质研究

在室温下的NaOH水溶液中Zn2 + 和Cu2 + 对胆红素 (BR)的荧光性质有显著的影响作用 .前者表现出荧光增强作用 ;后者表现出荧光猝灭作用 .本文进一步探讨了BR与Zn2 + 、Cu2 + 混合液的荧光和紫外可见光谱性质 .结果显示 ,当溶液中维持足够的Zn2 + 浓度时 ,Cu2 + 的荧光猝灭作用可受到有效抑制 ;在BR -Zn -Cu体系中Zn2 +优先于Cu2 + 与BR作用     

Charge transfer mechanism in N4+ + He and B3+ + He/H2 ion–atom/molecule collisions

Ab initio potential energy curves and coupling matrix elements of the molecular states involved in the collision of the N⁴⁺(2s)²S and B³⁺(1s²)¹S multicharged ions on the helium atom or molecular hydrogen have been determined by means of configuration interaction methods. The total and partial electron capture cross-sections have been evaluated in the frame of a semiclassic approach in the 1- to 100-keV laboratory energy range and compared to experimental data. A comparative study of both targets is performed in the case of the B³⁺ ion. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

热剥离法制备石墨烯纳米片对Pb2+和Cd2+的吸附

石墨粉氧化后,在氮气气氛下,快速高温剥离制得石墨烯纳米片。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(HRTEM)、拉曼(Raman)光谱、傅里叶变换红外(FT-IR)光谱和氮气吸附-脱附等分析手段对石墨烯样品进行了表征。这些分析测试结果显示:石墨烯样品主要由很薄的1-4层石墨组成,呈褶皱状态,比表面积为628.5 m²·g^-1。研究了石墨烯吸附水溶液中的Pb²⁺和Cd²⁺的pH值、吸附时间、吸附温度和金属离子初始浓度等影响因素, Pb²⁺和Cd²⁺的最大吸附量分别为460.20和72.39 mg·g^-1。结果表明,热剥离法制得的高质量石墨烯纳米片可以作为一种高效的从水中去除Pb²⁺和Cd²⁺的吸附材料。