Linear and cyclic polysilanes containing the bis(trimethylsilyl)amino group: synthesis,reactions, and spectroscopic characterization

The reaction of linear (Si(n)Cl(2)(n)(+2); n = 3-5) and cyclic (Si(5)Cl(10)) perchloropolysilanes with 1 or 2 equiv of LiN(SiMe(3))(2) results in the formation of the bis(trimethylsilyl)amino derivatives (Me(3)Si)(2)NSi(3)Cl(7) (1), (Me(3)Si)(2)NSi(4)Cl(9) (2), (Me(3)Si)(2)N(SiCl(2))(n)N(SiMe(3))(2) (n = 3, 4; n = 4, 5; n = 5, 6), cyclo-(Me(3)Si)(2)NSi(5)Cl(9) (7), and cyclo-[(Me(3)Si)(2)N](2)Si(5)Cl(8) (8). 1-8 easily can be hydrogenated with LiAlH(4) to give the corresponding amino and diamino polysilanyl hydrides. The monosubstituted and cyclic compounds 1, 2, 7, and 8 additionally afford Si-Si bond scission products, which cannot be separated in all cases. Chloro- and dichloro derivatives of Si(3)H(8), n-Si(4)H(10), and n-Si(5)H(12) are obtained from the corresponding aminosilanes and dry HCl. All compounds were characterized by standard spectroscopic techniques. For Si-H derivatives the coupled (29)Si NMR spectra were analyzed to obtain an unequivocal structural proof.     

Synthesis and structure of new carborane-substituted cyclotriphosphazenes

The reactions of [N(3)P(3)Cl(6)] with one, two, or three equivalents of the difunctional 1,2-closo-carborane C(2)B(10)H(10)[CH(2)OH](2) and K(2)CO(3) in acetone have been investigated. These reactions led to the new spiro-closo-carboranylphosphazenes gem-[N(3)P(3)Cl(6-2n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (1), 2 (2)) and the first fully carborane-substituted phosphazene gem-[N(3)P(3)[(OCH(2))(2)C(2)B(10)H(10)](3)] (3). A bridged product, non-gem-[N(3)P(3)Cl(4)[(OCH(2))(2)C(2)B(10)H(10)]] (4), was also detected. The reaction of the well-known spiro derivatives [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)] and [N(3)P(3)Cl(4)(O(2)C(12)H(8))] with the same carborane-diol and K(2)CO(3) in acetone gave the new compounds gem-[N(3)P(3)(O(2)C(12)H(8))(3-n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (5) or 2 (6), respectively), without signs of intra- or intermolecularly bridged species. Upon treatment with NEt(3) in acetone, compound 5 was converted into the corresponding nido-carboranylphosphazene. However, the reaction of gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5) with NEt(3) in ethanol instead of acetone proceeded in a different manner to give the new compound (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7). For compounds with two 2,2'-dioxybiphenyl units, gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5), (NHEt(3))[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(9)H(10)]] (8), and (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7), a mixture of different stereoisomers may be expected. However, for 5 and 7 only the meso compounds seem to be formed, with the same (R,S)-configuration as in the precursor [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)]. The reaction of 5 to give 8 seems to proceed with a change of configuration at one phosphorus center, giving a racemic mixture. The crystal structures of the nido-carboranylphosphazenes 7 and 8 have been confirmed by X-ray diffraction methods.     

Acylation of 2,5-dimethoxycarbonyl[60]fulleropyrrolidine and synthesis of its multifullerene derivatives

2,5-Dimethoxycarbonyl[60]fulleropyrrolidine (1) is acylated with various chlorocarbonyl compounds to give fullerene derivatives with the general formula C(60)(MeOOCCH)(2)NC(O)R, R = (CH(2))(5)Br, (CH(2))(8)C(O)Cl (3), (CH(2))(4)C(O)Cl, or cis-C(6)H(4)(C(O)Cl. The monoacylated sebacoyl derivative 3 readily reacts with alcohols and amines such as methanol, diethylamine, glycine methyl ester, and aza-18-crown-6 through the remaining chlorocarbonyl group. Chromatography of 3 on silica gel converts it into the corresponding acid C(60)(MeOOCCH)(2)NC(O)(CH(2))(8)COOH (4). Treating 4 with PCl(5) regenerates the precursor 3 quantitatively. Piperazine reacts with 4 in the presence of DCC and BtOH to form a bisfullerene derivative in which two sebacoyl chains and the piperazine act as the bridge between two molecules of 1. Other molecules with multifunctional groups react with 4 similarly to form multifullerene derivatives. NMR data indicate that the rotation of the relatively bulky phthaloyl group is hindered around the amide bond N [bond] C(O), the rotation barrier of which is 15.06 kcal/mol. The relative stereochemistry of the 2,5-dimethoxycarbonyl groups is established by (1)H NMR spectra and further confirmed by resolution of the enantiomeric 2,5-trans-isomer of the starting material 1.     

The Reaction of the Bis-spirocyclic Phosphazene [N 3 P 3 (O 2 C 12 H 8 ) 2 Cl 2 ] (O 2 C 12 H 8 = 2,2′-Dioxybiphenyl) with Thiophenols,in the Presence of Alkali Carbonates

The reactions of the spirocyclic phosphazene [N 3 P 3 (O 2 C 12 H 8 ) 2 Cl 2 ] (O 2 C 12 H 8 = 2,2'-dioxybiphenyl) with the thiophenols HS--C 6 H 4 --R and M 2 CO 3 (M = K or Cs) in refluxing acetone gave respectively the spirocyclic substituted derivatives [N 3 P 3 (O 2 C 12 H 8 ) 2 (SC 6 H 4 --R) 2 ] R = H ( 2a ), Br ( 2b ), OMe ( 2c ), NO 2 ( 2d ). The reaction is a two-step process the second of which is much faster than the first and the monosubstituted intermediate [N 3 P 3 (O 2 C 12 H 8 ) 2 (SC 6 H 4 --R)Cl] cannot be detected. By contrast, in the analogous reactions with the phenols HO--C 6 H 4 --R and M 2 CO 3 (M = K or Cs) in acetone or THF, to give the known derivatives [N 3 P 3 (O 2 C 12 H 8 ) 2 (OC 6 H 4 --R) 2 ], the first step is faster although both are very dependent on R, M and the solvent. Thus, in the case of the phenol HO--C 6 H 4 --OMe the reaction conditions could be adjusted to give the useful synthetic intermediate monosubstituted derivative [N 3 P 3 (O 2 C 12 H 8 ) 2 (OC 6 H 4 --OMe)Cl] ( 3 ). The reaction of [N 3 P 3 (O 2 C 12 H 8 ) 2 Cl 2 ] with the bifunctional reagent mercaptophenol HS--C 6 H 4 --OH was not specific and led to mixtures of cyclic and oligomeric products.     

Structures and electronic properties of C(56)Cl(8) and C(56)Cl(10) fullerene compounds.

Stimulated by the recent observation of the first C(56)Cl(10) chlorofullerene (Science, 2004, 304, 699), we performed a systematic density functional study of the structures and properties of C(56)Cl(10) and related compounds. The fullerene derivatives C(56)Cl(8) and C(56)Cl(10) based on the parent fullerene C(56)(C(2v):011), rather than those from the most stable C(56) isomer with D(2) symmetry, are predicted to possess the lowest energies, and they are highly aromatic. Further investigations show that the heats of formation of the C(56)Cl(8) and C(56)Cl(10) fullerene derivatives are highly exothermic, that is, -48.59 and -48.89 kcal mol(-1) per Cl(2) (approaching that of C(50)Cl(10)), suggesting that adding eight (or ten) Cl atoms releases much of the strain of pure C(56)(C(2v):011) fullerene and leads to highly stable derivatives. In addition, C(56)Cl(8) and C(56)Cl(10) possess large vertical electron affinities, especially for C(56)Cl(8) with value of 3.20 eV, which is even larger than that (3.04 eV) of C(50)Cl(10), indicating that they are potential good electron acceptors with possible photonic/photovoltaic applications. Finally, the (13)C NMR chemical shifts and infrared spectra of C(56)Cl(8) and C(56)Cl(10) are simulated to facilitate future experimental identification.     

C40X2（X=H,F,Cl,Br）的理论研究

应用密度泛函理论在B3LYP/6-31G*水平上对C40X2(X=H,F,Cl,Br)进行研究.研究结果表明,C40X2(X=H,F,Cl,Br)在热力学上是稳定的,卤化衍生物的稳定性随卤素原子序数的增大而降低,最有利的衍生化方式是1-4加成,1-2与1-4加成的卤化和氢化衍生物在所研究的分子中较为稳定.这些研究有助于理解富勒烯衍生物的衍生化模式.     

The Interaction of C60, C70, and C60(CN)2 radical anions with cobalt(II) tetraphenylporphyrin in solid multicomponent complexes

A method for the synthesis of the multicomponent ionic complexes: [Cr(I)(C(6)H(6))(2) (.+)][Co(II)(tpp)(fullerene)(-)].C(6)H(4)Cl(2), comprising bis(benzene)chromium (Cr(C(6)H(6))(2)), cobalt(II) tetraphenylporphyrin (Co(II)(tpp)), fullerenes (C(60), C(60)(CN)(2), and C(70)), and o-dichlorobenzene (C(6)H(4)Cl(2)) has been developed. The monoanionic state of the fullerenes has been proved by optical absorption spectra in the UV/vis/NIR and IR ranges. The crystal structures of the ionic [[Cr(I)(C(6)H(6))(2)](.+)](1.7)[[Co(II)(tpp)(C(60))](2)](1.7-). 3.3 C(6)H(4)Cl(2) and [[Cr(I)(C(6)H(6))(2)] (.+)](2)[Co(II)(tpp)[C(60)(CN)(2)]](-)[C(60)(CN)(2) (.-)]).3 C(6)H(4)Cl(2) are presented. The essentially shortened Co.C(fullerene) bond lengths of 2.28-2.32 A in these complexes indicate the formation of sigma-bonded [Co(II)(tpp)][fullerene](-) anions, which are diamagnetic. All the ionic complexes are semiconductors with room temperature conductivity of 2 x 10(-3)-4 x 10(-6) S cm(-1), and their magnetic susceptibilities show Curie-Weiss behavior. The neutral complexes of Co(II)(tpp) with C(60), C(60)(CN)(2), C(70), and Cr(0)(C(6)H(6))(2), as well as the crystal structures of [Co(II)(tpp)](C(60)).2.5 C(6)H(4)Cl(2), [Co(II)(tpp)](C(70)). 1.3 CHCl(3).0.2 C(6)H(6), and [Cr(0)(C(6)H(6))(2)][Co(II)(tpp)] are discussed. In contrast to the ionic complexes, the neutral ones have essentially longer Co.C(fullerene) bond lengths of 2.69-2.75 A.     

Di- and tetranuclear copper(I) complexes containing phenylaminobis(phosphonite), PhN{P(OC6H4OMe-o)2}2, and their reactivity toward bipyridyl ligands

The aminobis(phosphonite) PhN(P(OC6H4OMe-o)2)2 (PNP; 1) reacts with 2 equiv of CuI to give a binuclear complex, Cu2(mu2-I)2(NCCH3)2(mu-PNP) (2), whereas similar reactions with CuCl and CuBr furnish tetranuclear "ladder"-type complexes, Cu4(mu2-X)2(mu3-X)2(mu-PNP)2 (3, X = Cl; 4, X = Br), in excellent yield. The complex 2 when heated under vacuum turns into the tetranuclear complex 5 in a reversible fashion. Similarly, the complexes 3 and 4 on dissolution in CH3CN dissociate reversibly into the corresponding binuclear complexes from which the tetrameric complexes can be readily regenerated. Treatment of 2 with excess of pyridine produces the heterosubstituted derivative, Cu2(mu2-I)2(C5H5N)2(mu-PNP) (6). The interaction of 2 with 2,2'-bipyridine in 1:1 and 1:2 ratios produces the mono- and disubstituted derivatives, Cu2(mu2-I)I(C10H8N2)(mu-PNP) (7) and [Cu2(mu2-I)(C10H8N2)2(mu-PNP)]I (8), respectively. The chloro and bromo analogues of 7 are prepared by treating the tetranuclear derivatives 3 and 4 with 2,2'-bipyridine. Reaction of 2 with 4,4'-bipyridine in the presence of AgOTf gives the cationic complex [Cu4(NCCH3)4(C10H8N2)2(mu-PNP)2](OTf)4 (9), whereas the complex [Cu2(NCCH3)2(mu-PNP)2](OTf)2 (10) was obtained from the reaction of 2 with 1 equiv of 1 and AgOTf. The reactions of 3 and 4 with 2 equiv of 4,4'-bipyridine in acetonitrile afford one-dimensional copper(I) coordination polymers [Cu2(mu2-X)2(mu-PNP)(C10H8N2)]n (13, X = Cl; 14, X = Br). The molecular structures of 2-4, 6-8, 12, and 14 are confirmed by X-ray crystallography.     

内包金属富勒烯衍生物La@C82-(C4N2H8)mHn的合成与表征

在常温、Ar气保护下研究了金属富勒烯与哌嗪(Piperazine)的反应, 并用硅胶柱分离了3种金属富勒烯衍生物. 用激光解析飞行时间质谱、紫外-可见-近红外光谱和傅里叶变换红外光谱等手段分析确定其结构分别为La@C82-C4N2H8, La@C82-C4N2H8-H8和La@C82-(C4N2H8)2-H6. 对比C60与哌嗪的反应结果发现, 与空富勒烯相比, 金属富勒烯反应活性更高, 产物加成数目更多.     

Reactions of fullerenes with reactive methylene organophosphorus reagents: efficient synthesis of organophosphorus group substituted C60 and C70 derivatives

Treatment of C70 with cycloalkylaminomethylenebisphosphonates in the presence of NaH gave corresponding C70 dimers 1 in good yield, while the methanofullerenes, C70>CH(PO3Et2) (3) and C70>C(PO3Et2)2 (4) or C60>CH(PO3Et2) (5) and C60>C(PO3Et2)2 (6), were obtained, respectively, by the reaction of C70 or C60 with tetraethyl methylenediphosphonate in the presence of NaH. Diethyl cyanomethylphosphonate reacted with C60 or C70 under similar conditions to afford C60>C(PO3Et2)CN (7) and C70>C(PO3Et2)CN (8). Furthermore, the presence of weak electronic interactions between two fullerene cages of fullerene dimers was demonstrated by cyclic voltammetry. A radical mechanism was proposed for the formation of the fullerene derivatives on the basis of the ESR studies.     

Developing Reagents To Orient Fullerene Derivatives. Formation and Structural Characterization of (eta(2)-C(60)O)Ir(CO)Cl(As(C(6)H(5))(3))(2)

In order to obtain crystals of fullerene oxides that are suitable for single-crystal X-ray diffraction, the reactions between C(60)O and Vaska type iridium complexes have been examined. While reaction with Ir(CO)Cl(P(C(6)H(5))(3))(2)(and with triphenylphosphine but not triphenylarsine) results in partial deoxygenation of the fullerene epoxide, reaction with Ir(CO)Cl(As(C(6)H(5))(3))(2)()()produces crystalline (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3). Black triangular prisms of (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2).4.82C(6)H(6).0.18CHCl(3)form in the monoclinic space group P2(1)/n with a = 14.662(2) ?, b = 19.836(2) ?, c = 28.462(5) ?, and beta = 100.318(12) degrees at 123 (2) K with Z = 4. Refinement (on F(2)) of 10 472 reflections and 1095 parameters with 10 restraints yielded wR2 = 0.152 and a conventional R = 0.066 (for 7218 reflections with I > 2.0sigma(I)). The structure shows that the iridium complex is bound to a 6:6 ring junction of the fullerene with four partially occupied sites for the epoxide oxygen atom. Thus, while deoxygenation of the fullerene does not occur upon reaction with Ir(CO)Cl(AsPh(3))(2), there is a greater degree of disorder in (eta(2)-C(60)O)Ir(CO)Cl(AsPh(3))(2)than previously reported for (eta(2)-C(60)O)Ir(CO)Cl(PPh(3))(2).     

Determination of binding strength for the supramolecular complexation of a designed bisporphyrin with C60, C70 and their derivatives employing absorption spectrophotometric, fluorescence and quantum chemical calculations

The present paper reports the synthesis of a designed bisporphyrin (1), and its supramolecular complexes with C60, C70 and their derivatives, namely, tert-butyl-(1,2-methanofullerene)-61-carboxylate (2) and [6,6]-phenyl C70 butyric acid methyl ester (3) in toluene medium. C60, C70 and their derivatives undergo ground state non-covalent interaction with 1 is evidenced from absorption spectrophotometric study in which it is observed that the intensity of the Soret absorption band of 1 decreases considerably in presence of C60, C70 and their derivatives. Steady state fluorescence studies reveal efficient quenching of fluorescence of 1 in presence of fullerenes. The binding constant (K) values of the fullerene/1 complexes follows the trend: 2/1相似文献   

Preparation and substitution chemistry of [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6]. A useful precursor for pseudohalide, acetate, and organometallic complexes containing the [W6Cl8](4+) core

The tosylate (p-toluenesulfonate) cluster [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6] (1) has been prepared and characterized by IR and NMR spectroscopy, elemental analysis, and an X-ray crystal structure. This cluster complex is shown to be a useful starting material for the preparation of pseudohalide clusters, [Bu4N]2[W6Cl8(NCQ)6] (Q = O (2), S (3), and Se (4)), in high yields. Cluster 1 also serves as a precursor to the new cluster compounds: [Bu4N]2[W6Cl8(O2CCH3)6] (5), [Bu4N]2[W6Cl8((mu-NC)Mn(CO)2(C5H5))6] (6), [W6Cl8((mu-NC)Ru(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (7), and [W6Cl8((mu-NC)Os(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (8). X-ray crystal structures are reported for 1, 4, and 5.     

Synthesis of two pentaarylated [60]fullerene derivatives Ar_5C_(60)-H (Ar = p-MeC_6H_4, m-MeC_6H_4) and their novel electrochemical properties

Through one pot reaction of C60 with organocopper/magne-sium reagent ( p - MeQ H4 )2 CuMgBr or ( m - MeC6 H )2 -CuMgBr prepared from CuBr-Me2S and p-MeC6H4MgBr or m-MeC6H4MgBr and subsequent quenching with aqueous NH4Cl, two pentaarylated [60] fullerene derivatives (p-MeC6H4)5C60H (1) and (m-MeC6H4)5C60H (2) have been synthesized in 94% and 96% yields, respectively. While known compound 1 prepared via this improved method is unambiguously identified, new compound 2 is fully characterized by elemental analysis, IR, UV-vis, 1H NMR and 13C NMR spectroscopies. Additionally, electrochemical study shows that the two [60] fullerene derivatives 1 and 2 in dichloromethane solution display two sequential one-electron reductions which are shifted by about 0.4V towards more negative potential values with respect to free C60. Such remarkable cathodic shift is attributed to the multiple breakage of the double-bond conjugation within the fullerene core.     

Preparation of η2-complexes of fullerenes by reduction. Crystal structure and optical properties of {Ni(dppp)·(η2-C70)}·(C6H4Cl2)0.5

The new reduction method for preparation of η(2)-complexes of fullerenes with nickel-1,3-bis(diphenylphosphino)propane has been developed in which Ni(dppp)Cl(2) and C(60)(C(70)) mixtures are reduced with sodium tetraphenylborate. Single crystals of the first η(2)-complex of nickel with fullerene C(70): {Ni(dppp)·(η(2)-C(70))}·(C(6)H(4)Cl(2))(0.5) (1) (C(6)H(4)Cl(2) = o-dichlorobenzene) have been obtained as well as the previously described complex with fullerene C(60): {Ni(dppp)·(η(2)-C(60))}·(Solvent) (2). The crystal structure of 1 has been solved to show the coordination of nickel to the C-C bond of C(70) at the 6-6 ring junction of η(2)-type to form Ni-C(C(70)) bonds of 1.929-1.941(2) ? length, the shortest M-C bonds among those known for η(2)-complexes of fullerenes C(60) and C(70). The length of the C-C bond to which Ni atom is coordinated (1.494(3) ?) is noticeably longer than the average length of these bonds in C(70) (1.381(2) ?). Optical spectra of 1 in the IR- and UV-visible ranges have been analyzed to show the splitting of some C(70) bands due to C(70) symmetry lowering. The complex has a red-brown color in solution and manifests three bands in the visible range at 379, 467 and 680 nm. The solution of 1 is air sensitive since air exposure restores the color and absorption bands of the starting C(70) at 383 and 474 nm.     

A theoretical investigation on the structures and stabilities of C<Subscript>60</Subscript>X<Subscript>18</Subscript> and C<Subscript>70</Subscript>X<Subscript>10</Subscript> (X = H,F, Cl,and Br)

A density functional theory study was performed on fullerene derivatives C₆₀X₁₈ and C₇₀X₁₀ (X = H, F, Cl, and Br). The calculated results show that the lowest energy isomers are IPR-satisfying for C₆₀X₁₈ (X = H, F, Cl, and Br). It is found that the addition patterns of X (X = Cl and Br) are different from those of X (X = H and F) for C₆₀, demonstrating that the stability of fullerene derivatives is partly attributed to the steric repulsion and electronegativity of added atoms. However, the lowest energy isomers are IPR-violating for C₇₀X₁₀ (X = H, F, and Cl), suggesting that many more fullerene derivatives may violate the isolated pentagon rule.     

Oxygen atom transfer from nitrogenous ReVO reagents to diphosphines and subsequent transformations. Rhenium(III) products and reaction models

The concerned diphosphines are Ph2P(CH2)nPPh2 (1), abbreviated PnP, and the ReVO reagents are ReOCl3L (2) and ReOCl3L' (3), where L and L' are the azopyridine and pyridine-imine ligands p-ClC6H4N=NC5H4N and p-MeC6H4N=CHC5H4N, respectively. One atom transfer from 2 to 1 has afforded Re(OPnP)Cl3L (4a, n = 1; 4b, n = 2; 4c, n = 3). Of these 4b and 4c are stable, but 4a undergoes spontaneous isomerization to Re(PlPO)Cl3L (5) in solution. Two-atom transfer studied with both 2 and 3 has afforded binuclear LCl3Re(OPnPO)ReCl3L (8a, n = 2; 8b, n = 3) and L'Cl3Re(OPnPO)ReCl3L' (9a, n = 2; 9b, n = 3) for n = 2, 3 and mononuclear Re(OP1PO)Cl3L (11) and Re(OP1PO)Cl3L' (12) for n = 1. The mixed system L'Cl3Re(OP2PO)ReCl3L (10) has been prepared from 3 and 4b. The complex Re(PPh3)Cl3L (7a) is furnished by the reaction of Re(OPPh3)Cl3L (6a) or 4b or 11 with PPh3. The species have been characterized with the help of spectral, electrochemical, and X-ray structural data. All the complexes have mer geometry except 5 and 7a, which have fac geometry. The latter is best suited for concurrent Re-N and Re-P back-bonding. Variable-temperature rate data of the reaction 4a-->5 are consistent with an intramolecular strongly associative transition state (delta S++, -22.6 eu) in which the dangling phosphine function lies close to the metal. Two-atom transfer to P1P is believed to proceed via a transient binuclear intermediate which undergoes cleavage at one end due to steric crowding, affording 11 and 12. Crystal data for the complexes are as follows: 5.1.5 C6H6, empirical formula C45H39Cl4N3OP2Re, crystal system triclinic, space group P1, a = 10.034(2) A, b = 10.737(2) A, c = 20.357(4) A, alpha = 89.38(3) degrees, beta = 87.79(3) degrees, gamma = 80.22(3) degrees, V = 2159.7(7) A3, Z = 2; 7a.CH2Cl2, empirical formula C30H25Cl6N3PRe, crystal system monoclinic, space group P2(1)/n, a = 11.695(6) A, b = 17.745(7) A, c = 15.459(9) A, beta = 100.94(5) degrees, V = 3150(3) A3, Z = 4; 9a, empirical formula C52H48Cl6N4O2P2Re2, crystal system monoclinic, space group C2/c, a = 19.769(12) A, b = 12.864(6) A, c = 22.20(2) A, beta = 101.76(6) degrees, V = 5530(6) A3, Z = 4; 11, empirical formula C36H30Cl4N3O2P2Re, crystal system monoclinic, space group I2/a, a = 16.866(6) A, b = 12.583(6) A, c = 34.78(2) A, beta = 99.22(4) degrees, V = 7285(7) A3, Z = 8.     

Controlling the confinement and alignment of fullerene C(70) in para-substituted calix[5]arenes

In toluene fullerene C(70) forms 2:1 complexes with p-benzylcalix[5]arene (1) and p-phenylcalix[5]arene (2), [C(70) subset1(2)].6(C(7)H(8)) and [C(70) subset2(2)].7(C(7)H(8)). The fullerene molecules are completely shrouded by two calix[5]arenes in addition to terminal benzyl groups from other supermolecules, [C(70) subset1(2)], and solvent. Within the capsule-like supermolecules the calixarenes have distinctly different arrangements relative to the principal axis of the fullerene; for [C(70) subset1(2)].6(C(7)H(8)) the oxygen planes of the two calixarenes are skewed by 37.0 and 47.5 degrees , whereas in [C(70) subset2(2)].7(C(7)H(8)) the principal axes of the fullerene and the two encapsulating calixarenes are more closely aligned with the corresponding angles at 9.7 and 8.6 degrees , and features a pentaphenyl inter-calixarene embrace. The Hirshfeld surfaces of these two complexes have been investigated for a detailed understanding of the orientation and nature of interactions of C(70) with the cavitand-type molecules and toluene.     

Synthesis of linear and cyclic carbophosphazenes via an oxidative chlorination strategy

The use of a mild, oxidative chlorination route for the synthesis of linear and cyclic carbophosphazenes is described. For example, chlorination of the linear PNCN chain Ph(2)P-N=C(Ph)-N(SiMe(3))(2) (1) with C(2)Cl(6) led to the clean formation of the previously known 8- and 6-membered rings [Ph(2)PNC(Ph)N](2) (2) and [Ph(2)PNC(Ph)NP(Ph)(2)N] (3), respectively. In a similar fashion, the N-alkyl-substituted PNCN derivatives, Ph(2)P-N=C(Ph)-N((t)Bu)SiMe(3) (4) and Ph(2)P-N=C(Ph)-N(i)Pr(2) (7) were readily converted by C(2)Cl(6) into the halogenated derivatives ClPh(2)P=N-C(Ph)=N(t)Bu (5) and [ClPh(2)P=N=C(Ph)-N(i)Pr(2)]Cl (8), respectively. Protonation of 5 was accomplished using HCl and gave the carbophosphazenium salt [ClPh(2)P=N-C(Ph)=N((t)Bu)H]Cl (6). In addition, the isolation of a rare 8-membered P(2)N(4)C(2) heterocycle [(Cl(3)P=N)ClPNC(Ph)NP(Cl)(2)NC(Ph)N] (9) from the reaction of PCl(5) and Li[PhC(NSiMe(3))(2)] is reported. Treatment of 9 with one equivalent of GaCl(3) led to the discovery of an unusual Lewis acid-induced ring contraction reaction whereby the (PNCN)(2) ring in 9 is converted into the novel 6-membered P(2)N(3)C heterocyclic adduct [(Cl(3)P=N)ClPNP(Cl)(2)NC(Ph)N].GaCl(3) (10) with concomitant release of PhCN. Structural characterization of compounds 1, 5, 6, and 8-10 by single-crystal X-ray diffraction is also provided.     

Synthesis and structural characterization of highly chlorinated C70, C70Cl28

Chlorination of [70]fullerene with SbCl(5), VCl(4) or PCl(5) yielded C(70)Cl(28) comprising three isomers, all containing four isolated benzenoid rings in the fullerene cage. This demonstrates, for the first time for C(70) derivatives, a stabilization effect due to planar aromaticity.