Structure property correlation in lithium borophosphate glasses

To investigate the influence of cation mobility variation due to the mixed glass former effect, 0.45Li₂O-(0.55 − x) P₂O₅−x B₂O₃ glasses (0 ≤; x ≤ 0.55) are studied keeping the molar ratio of Li₂O/(P₂O₅ + B₂O₃) constant. Addition of B₂O₃ into lithium phosphate glasses increases the glass transition temperature (T _g) and number density, decreases the molar volume, and generally renders the glasses more fragile. The glass system has been characterised experimentally by XRD, XPS and impedance studies and studied computationally by constant volume molecular dynamics (MD) simulations and bond valence (BV) method to identify the structural variation with increasing the B₂O₃ content, its consequence for Li⁺ ion mobility, as well as the distribution of bridging and non-bridging oxygen atoms. These studies indicate the increase of P-O-B bonds (up to Y = [B₂O₃]/([B₂O₃] + [P₂O₅]) ≈ 0.5 and B-O-B bonds, as well as the decrease of P-O-P bonds and non-bridging oxygens (NBOs) with rising B₂O₃ content. The system with Y ≈ 0.5 exhibits maximum ionic conductivity, 1.0 × 10⁻⁷ S cm⁻¹, with activation energy 0.63 V. Findings are rationalised by a model of structure evolution with varying B₂O₃ content Y and an empirical model quantifying the effect of the various structural building blocks on the ionic conductivity in this mixed glass former system.     

Short-range order analysis and some physical properties of InxSe1−x glasses

Bulk In_xSe_1−x (with x=5-25 at%) glasses were prepared using the melt-quench technique. Short range order(SRO) was examined by the X-ray diffraction using Cu(k_α) radiation in the wave vector interval 0.28≤k≤6.5 A⁰⁻¹.The SRO parameters have been obtained from the radial distribution function. The inter-atomic distance obtained from the first and second peak are r₁=0.263 and r₂=0.460 nm, which is equivalent In-Se and Se-Se bond length. The fundamental structural unit for the studied glasses is In₂Se₃ pyramid. Using the differential scanning calorimetry (DSC), the crystallization mechanism of In_xSe_1−x chalcogenide glass has been studied. The glass transition activation energy (E_g) is 289±0.3 kj/mol.There is a correlation amongst the glass forming ability, bond strength and the number of lone pair electrons. The utility of the Gibbs-Di Marzio relation was achieved by estimating T_g theoretically.     

Bioactivity of SiO2-CaO-P2O5-Na2O glasses containing zinc-iron oxide

Glasses with composition x(ZnO,Fe₂O₃)(65 − x)SiO₂20(CaO,P₂O₅)15Na₂O (6 ≤ x ≤ 21 mol%) were prepared by melt-quenching technique. Bioactivity of the glasses was investigated in vitro by examining apatite formation on the surface of glasses treated in acellular simulated body fluid (SBF) with ion concentrations nearly equal to those in human blood plasma. Formation of bioactive apatite layer on the samples treated in SBF was confirmed by using Fourier transform infrared reflection (FTIR) spectroscopy, grazing incidence X-ray diffraction (GI-XRD) and scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer. Development of an apatite structure on the surface of the SBF treated glass samples as functions of composition and time could be established using the GI-XRD data. FTIR spectra of the glasses treated in SBF show features at characteristic vibration frequencies of apatite after 1-day of immersion in SBF. SEM observations revealed that the spherical particles formed on the glass surface were made of calcium and phosphorus with the Ca/P molar ratio being close to 1.67, corresponding to the value in crystalline apatite. Increase in bioactivity with increasing zinc-iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of glass composition and immersion time in SBF.     

Optical and electronic polarizability investigation of Nd-doped soda-lime silicate glasses

This paper reports on different physical and optical properties of Nd³⁺-doped soda-lime silicate glass. The glasses containing Nd³⁺ in (65−x)SiO₂:25Na₂O:10CaO:xNd₂O₃ (where x=0.0-5.0 mol%) have been prepared by the melt-quenching method. In order to understand the role of Nd₂O₃ in these glasses the density, molar volume, refractive index and optical absorption were investigated. The results show that the density and molar volume of the glasses increase with an increase in Nd₂O₃ concentration and consequently generate more non-bridging oxygen (NBOs) into glass matrix. The optical absorption spectra were measured in the wavelength range from 300 to 700 nm and the optical band gaps were determined. It was found that the optical band gap decreases with an increase in Nd₂O₃ concentration. On the basis of the measured values of density and refractive index, the Nd³⁺ ion concentration in glasses, the polarizability of oxide ions and optical basicity were theoretically determined.     

Raman spectra of soda-lime-silicate glass doped with rare earth

Soda-lime-silicate glasses doped with different rare earth oxides (La₂O₃, CeO₂, Nd₂O₃, Gd₂O₃ and Y₂O₃) of 1 mol% content were prepared by the traditional melting-quenching methods. In order to reveal the effects of rare earth elements on the behavior of soda-lime-silicate glass the structures of soda-lime-silicate glasses doped with different rare earth oxides were determined using an INVIA confocal microRaman spectrometer equipped with a CCD detector, and viscosities of glass melts were measured using a rotating crucible viscometer; the melting temperature of the studied glasses was derived on the basis of the Arrhenius equation. Three expressions of the fraction of non-bridging oxygen (NBO/NBO+BO), average number of non-bridging oxygen (NBO) per tetrahedron (NBO/tetrahedron) and average number of bridging corners per tetrahedron (bridges/tetrahedron) for investigated soda-lime-silicate glasses were given, and the effect of rare earth dopants on the structure of soda-lime-silicate was characterized by the Raman shift, variation of the [SiO₄] tetrahedron structural unit Qⁿ (n=1,2,3,4), fraction of non-bridging oxygen and the average number of bridging corners per tetrahedron. The effect of doping rare earth oxides into glass on the viscosity and melting temperature was interpreted by changes in structure of soda-lime-silicate glasses doped with rare earth oxides.     

EPR and magnetic susceptibility studies of iron ions in ZnO-Fe2O3-SiO2-CaO-P2O5-Na2O glasses

Room temperature electron paramagnetic resonance (EPR) spectra and temperature dependent magnetic susceptibility data have been obtained on bulk x(ZnO,Fe₂O₃)(65−x)SiO₂20(CaO, P₂O₅)15Na₂O (6≤x≤21 mole%) glasses prepared by melt quenching method. EPR spectra of the glasses revealed absorptions centered at g≈2.1 and 4.3. The variations of the intensity and line width of these absorption lines with composition have been interpreted in terms of the variation in the concentration of the Fe²⁺ and Fe³⁺ ions in the glass and the interaction between the iron ions. EPR and magnetic susceptibility data of the glasses reveal that both Fe²⁺ and Fe³⁺ ions are present in the glasses, with their relative concentration being dependent on the glass composition. The studies reveal superexchange type interactions in these glasses, which are strongly dependent on their iron content.     

In vitro evaluation of bioactivity of CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Glasses with compositions 41CaO(52 − x)SiO₂4P₂O₅·xFe₂O₃3Na₂O (2 ≤ x ≤ 10 mol.%) were prepared by melt quenching method. Bioactivity of the different glass compositions was studied in vitro by treating them with simulated body fluid (SBF). The glasses treated for various time periods in SBF were evaluated by examining apatite formation on their surface using grazing incidence X-ray diffraction, Fourier transform infrared reflection spectroscopy, scanning electron microscopy and energy dispersive spectroscopy techniques. Increase in bioactivity with increasing iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of immersion time in SBF and glass composition.     

Electrical conductivity and complex electric modulus of titanium doped nickel-zinc ferrites

The samples Ni_1+x−yZn_yTi_x Fe_2−2xO₄; y=0.1, 0.0≤x≤0.5 were prepared in a single-phase spinel structure as indicated from X-ray analysis. Electrical conductivity and dielectric measurements at different temperatures from 300 K to 600 K in the frequency range from 42 Hz to 5 MHz have been analyzed. The relation of conductivity with temperature revealed a semiconductor to semimetallic behavior as Ti⁴⁺ concentration increases. The conduction mechanism depends mainly on the valence exchange between the different metal ions in the same site or in different sites. The dielectric constant as a function of temperature and frequency showed that there is a strong dependence on the compositional parameter x. The electrical modulus has been employed to study the relaxation dynamics of charge carriers. The result indicates the presence of correlation between motions of mobile ion charges. The activation energies extracted from M′(ω) and M″(ω) peaks are found to follow the Arrhenius law. The electrical conductance of the samples found to be dependent on the temperature and frequency.     

Effects of SrO/ZnO on structure and properties of UV-transmitting borophosphosilicate glass

UV-transmitting borophosphosilicate glasses series, 2Al₂O₃−xSrO-(18−x)ZnO-33.3P₂O₅-16.7B₂O₃-30SiO₂ glasses with x=0-18 mol% were prepared and studied. The substitution of SrO for ZnO increases the density and the thermal expansion coefficient (α), but decreases the molar volume (V_m). The glass transition temperatures (T_g) and softening points (T_d) vary within a small range. The relative chemical durability was determined by measuring the weight loss of a polished glass sample after immersion in deionized water at 50 °C for 24 h, the chemical durability of the glasses increases when x≤9, and drops when x>9. With the increasing SrO content, the UV transmittance of the glasses decreases mildly. The compositional dependence of E_opt shows a decrease trend with increasing SrO content. The structural changes with the glass compositions were examined by FT-IR and Raman spectra.     

Optical absorption and thermoluminescence studies on LiF-Sb2O3-B2O3 glasses doped with Ni ions

20LiF-(30−x)Sb₂O₃-50B₂O₃:xNiO glasses with the value of x (ranging from 0 to 1.0 mol% in steps of 0.2) were prepared. A number of studies, viz. differential scanning calorimetry, optical absorption, magnetic susceptibility and thermoluminescence, on these glasses were carried out as a function of nickel ion concentration. An anomaly has been observed in all the properties of these glasses when NiO concentration is about 0.6 mol%. The results of these studies were analysed in the light of different environments of nickel ions in the glass network.     

New insights from variable-temperature and variable-pressure studies into coupling and decoupling processes for ion transport in polymer electrolytes and glasses

A fresh analysis of literature data shows how the influences of temperature and pressure on ion transport and structural relaxation in glass-forming systems may be combined within the framework of ‘master plots’ based on the equation E_A = M · V_A, to reveal new insights into coupling and decoupling effects in a wide range of systems. E_A,σ and V_A,σ are, respectively, instantaneous activation energies and volumes for ionic conductivity and the parameter, M_σ, is a corresponding ‘process modulus’. For structural relaxations occurring at the glass transition, the appropriate modulus is given by M_s = T_g · dP/dT_g. We can now identify typical behaviour patterns for fragile liquids on the one hand, and typical inorganic glasses on the other. Thus, the parameters, M_σ and M_s, for fragile systems such as molten Ca(NO₃)₂:KNO₃ (CKN) or a typical polymer electrolyte such as a complex of LiCF₃SO₃ in PPG, are found to remain constant over a wide range of temperatures down to T_g, despite changes in the temperature (and pressure) dependences of the ionic conductivities, as indicated for example by a return to Arrhenius behaviour in the case of CKN, or by so-called Stickel plots and changes in the VTF parameters for the polymer electrolytes. If E* and V* are activation energies and volumes assigned to elementary steps, when again E* = M · V*, we can go further and identify the microscopic processes driving forward structural relaxation. In the case of inorganic glasses, where usually we find the decoupling index R_τ ≈ 10¹², we identify two distinct decoupling paradigms represented by strong and fragile systems respectively, where in both cases the activation volumes for ion transport are very similar to the corresponding ionic volumes. In the former case (typified by the strongly cross-linked silicate and aluminosilicate systems), the negative activation volumes for structural relaxation (negative values of dT_g/dP) are clearly indicative of a ‘water-like’ behaviour attributable to the collapse of the network under pressure. On the other hand, for the more fragile fast-ion conducting silver iodomolybdate glass, the experimental results show that M_s (at T_g) ≈ M_σ (in glass), implying some recoupling of structural relaxation to ion transport. Arguments based on the dynamic structure model lead us to predict that a similar close link should exist between M_s (at T_g) and M_σ in the relatively fragile lithium and sodium borate glasses, thus highlighting the need for more information concerning the effects of pressure on the glass transition temperatures of common inorganic glasses.     

Compositional dependence of in-vitro bioactivity in sodium calcium borate glasses

Borate glasses with composition xCaO (100−x) B₂O₃ (20≤x≤50), where x is in mole percent) and 50CaO·45B₂O₃·5Na₂O have been prepared using conventional melt quench technique. Samples were submerged in simulating body fluid solution (SBF) at 37 °C for various periods of time. After storage the samples were analyzed in order to investigate if a surface layer of hydroxyl carbonate apatite layer (HCA layer/Ca-P layer) had formed. The analysis technique used included Fourier-Transform Infrared Spectroscopy (FTIR). The rate of HCA layer formation on the surface of exposed glass samples is determined by FTIR, percentage weight loss measurements of glass samples in SBF and variation of pH of SBF as a function of time. Increase in calcium content in the glass matrix has shown to decrease the rate of HCA formation on glass surfaces. The borate glass with x=20 has shown HCA layer formation on glass surface within two days of dipping. The bone like apatite formation of glass surface demonstrates the potential of glass for integration with bone.     

Solid-state NMR study of bioactive binary borosilicate glasses

A series of binary borosilicate glasses prepared by the sol-gel method are shown to be bioactive. Tetraethyl orthosilicate (TEOS) and trimethylborate (TMB) in acidic medium are used to prepare xB₂O₃·(1−x)SiO₂ glass systems for x=0.045-0.167. The formation of a layer of apatite-like mineral on the glass surface becomes apparent after soaking in simulated body fluid for 48 h. We have measured the ¹¹B-¹¹B homonuclear second moments of the borosilicate glasses and inferred that no macroscopic phase separation occurred in our glasses. The ¹¹B chemical shift data also show that the formation of clustered boroxol rings is negligible in our glass system. Although the bioactivity of our borosilicate glasses is less than that of CaO-SiO₂ sol-gel glasses, these simple binary systems could be taken as reference glass systems for the search of new bioactive borosilicate glasses.     

Investigation of vanadium–sodium silicate glasses using XANES spectroscopy

X-ray absorption near edge structure spectroscopy has been used to investigate the electronic and atomic structure of (V₂O₅)_x(Na₂O)_0.30(SiO₂)_0.70−x (x < 0.1) glasses obtained by melt-quench technique. The results show no sign of metallic clustering of V atoms, but mixed oxidation states (+4 and +5) of V and strong V3d–O2p hybridization in the glasses. Detailed analysis has revealed that the glass samples contain about 15% V⁴⁺ and 85% V⁵⁺ and the ligand-field splitting is about 1.6 eV.     

Influence of primary ion species on the secondary cluster ion emission process from SAMs of hexadecanethiol on gold

In order to investigate the secondary cluster ion emission process of organo-metallic compounds under keV ion bombardment, self-assembled monolayers (SAMs) of alkanethiols on gold are ideal model systems. In this experimental study, we focussed on the influence of the primary ion species on the emission processes of gold-alkanethiolate cluster ions from a hexadecanethiol SAM on gold. For this purpose, we carried out time-of-flight secondary ion mass spectrometry (TOF-SIMS) measurements using the following primary ion species and acceleration voltages: Ar⁺, Xe⁺, SF₅⁺ (10 kV), Bi⁺, Bi₃⁺(25 kV), Bi₃²⁺, Bi₅²⁺, Bi₇²⁺ (25 kV).It is well known that molecular ions M⁻ and gold-alkanethiolate cluster ions Au_xM_y⁻ with M = S-(CH₂)₁₅-CH₃, x − 3 ≤ y ≤ x + 1, x, y > 0, show intense peaks in negative mass spectra. We derived yields Y_SI exemplarily for the molecular ions M⁻ and the gold-hexadecanethiolate cluster ions Au_y+1M_y⁻ up to y = 8 and found an exponentially decreasing behaviour for increasing y-values for the cluster ions.In contrast to the well-known increase in secondary ion yield for molecular secondary ions when moving from lighter to heavier (e.g. Ar⁺ to Xe⁺) or from monoatomic to polyatomic (e.g. Xe⁺ to SF₅⁺) primary ions, we find a distinctly different behaviour for the secondary cluster ions. For polyatomic primary ions, there is a decrease in secondary ion yield for the gold-hexadecanethiolate clusters whereas the relative decrease of the secondary ion yield ξ_Y with increasing y remains almost constant for all investigated primary ions.     

Effect of Li2O content on physical and structural properties of vanadyl doped alkali zinc borate glasses

The effect of Li₂O content in vanadyl doped 20ZnO+xLi₂O+(30−x)Na₂O+50B₂O₃ (5≤x≥25) glasses has been studied with respect to their physical and structural properties. The absence of sharp peaks in XRD spectra of these glass samples confirms the amorphous nature. The physical parameters like density, refractive index, ionic concentration and electronic polarizability vary non-linearly with x mol% depending on the diffusivities of alkali ions. EPR and optical absorption spectra reveal that the resonance signals are characteristics of VO²⁺ ions in tetragonally compressed octahedral site. Spin-Hamiltonian, crystal field, tetragonal field and bonding parameters are found to be in good agreement with the other reported glass systems. The tetragonal distortion (g_⊥-g_∥) and Dt reveals that their values vary non-linearly with Li₂O content and reaches a minimum at x=10 mol%. An anomaly of character has been observed in all the properties of vanadyl doped glass systems, which gives a clear indication of mixed alkali effect.     

Evaluation of optical parameters of some tellurite glasses

Evaluation of optical parameters of tellurite glasses in the form: 80TeO₂-5TiO₂-(15-x) WO₃-xA_nO_m, where xA_nO_m = 0.01, 1, 3, 5 Nb₂O₅ or 0.01, 0.1, 1, 3 Nd₂O₃ or 0.01, 0.1, 1, 3, 5, 7 Er₂O₃ mol% will be carried out. The optical parameters will be focused on calculating molar refractivity, molar polarizability, oxide ion polarizability, molar cation polarizability, optical basicity, metallization and number of polarizable atoms per unit volume for every glass composition in order to interpret the refractive index of these glasses.     

X-ray photoelectron spectroscopy of CeO2–Na2O–SiO2 glasses

A series of (CeO₂)_x–(Na₂O)_0.3–(SiO₂)_(0.7−x) glasses, where 0.025 ≤ x ≤ 0.075, have been synthesized and investigated by mean of X-ray photoelectron spectroscopy (XPS). The Ce 3d spin-orbit doublet was curve fitted in order to quantify the proportions of each cerium oxidation state in these glasses. It was found that Ce ions are predominantly in the Ce(III) state in glasses with compositions x ≤ 0.075, while mixed Ce valences were found in the glass with composition x = 0.10. The O 1s spectra have also been curve fitted with two components, one from bridging oxygen (BO) and the other from non-bridging oxygen atoms (NBO). The measured number of NBO, based on the fact that only oxygen atoms in the site Si–O–Na⁺ contribute to the NBO peak, was found to be constant at ∼35% for all samples, in good agreement with the value calculated from the glass composition and inductively coupled plasma (ICP) suggesting that Ce ions enter the network as a glass intermediate. The thermal measurements done on these glasses agree well with the XPS findings.     

Effect of Mn on the magnetic properties of Fe3B/Nd2Fe14B nanocomposites

The magnetic properties of Nd_4.5Fe_77−xMn_xB_18.5 (x=0, 1 and 2) nanocomposites prepared by the crystallization of amorphous precursors were investigated. Addition of Mn is found to decrease the crystallization temperature of the amorphous ribbons. The intrinsic coercivity _iH_c and maximum energy product (BH)_max increase from 2.6 kOe and 9.1 MGOe for x=0 to 3.1 kOe and 10.3 MGOe for x=1, respectively, and the remanence ratio M_r/M_s increases from 0.70 to 0.72. The effect of Mn on Curie temperature T_C and the thermal stability of M_r and _iH_c were also studied. ⁵⁷Fe Mössbauer spectra have been recorded for x=0, 1 and 2 ribbons at room temperature and site preference of the Mn atoms in Fe₃B and Nd₂Fe₁₄B phases is discussed using the Mössbauer spectroscopy.     

Influence of Co doping content on its valence state in Zn1−xCoxO (0 ≤ x ≤ 0.15) thin films

Zn_1−xCo_xO (0 ≤ x ≤ 0.15) thin films grown on Si (1 0 0) substrates were prepared by a sol-gel technique. The effects of Co doped on the structural, optical properties and surface chemical valence states of the Zn_1−xCo_xO (0 ≤ x ≤ 0.15) films were investigated by X-ray diffraction (XRD), ultraviolet-visible spectrometer and X-ray photoelectron spectroscopy (XPS). XRD results show that the Zn_1−xCo_xO films retained a hexagonal crystal structure of ZnO with better c-axis preferred orientation compared to the undoped ZnO films. The optical absorption spectra suggest that the optical band-gap of the Zn_1−xCo_xO thin films varied from 3.26 to 2.79 eV with increasing Co content from x = 0 to x = 0.15. XPS studies show the possible oxidation states of Co in Zn_1−xCo_xO (0 ≤ x ≤ 0.05), Zn_0.90Co_0.10O and Zn_0.85Co_0.15O are CoO, Co₃O₄ and Co₂O₃, with an increase of Co content, respectively.