Importance of collision cross section measurements by ion mobility mass spectrometry in structural biology

The field of ion mobility mass spectrometry (IM‐MS) has developed rapidly in recent decades, with new fundamental advances underpinning innovative applications. This has been particularly noticeable in the field of biomacromolecular structure determination and structural biology, with pioneering studies revealing new structural insight for complex protein assemblies which control biological function. This perspective offers a review of recent developments in IM‐MS which have enabled expanding applications in protein structural biology, principally focusing on the quantitative measurement of collision cross sections and their interpretation to describe higher order protein structures.     

A two-dimensional quadrupole ion trap mass spectrometer

The use of a linear or two-dimensional (2-D) quadrupole ion trap as a high performance mass spectrometer is demonstrated. Mass analysis is performed by ejecting ions out a slot in one of the rods using the mass selective instability mode of operation. Resonance ejection and excitation are utilized to enhance mass analysis and to allow isolation and activation of ions for MS(n) capability. Improved trapping efficiency and increased ion capacity are observed relative to a three-dimensional (3-D) ion trap with similar mass range. Mass resolution comparable to 3-D traps is readily achieved, including high resolution at slower scan rates, although adequate mechanical tolerance of the trap structure is a requirement. Additional advantages of 2-D over 3-D ion traps are also discussed and demonstrated.     

Scanning a triple quadrupole mass spectrometer for doubly charged ions

Charge exchange reactions within a triple quadrupole mass spectrometer characterize doubly charged ions formed in the ion source. Two methods have been developed for identifying the singly charged ions formed from doubly charged ions by charge exchange in the collision quadrupole. The first is based on the characteristically high kinetic energy-to-charge ratios of the products of charge exchange; this property can be used to separate these ions from all other singly charged ions. This retarding potential method is analogous to procedures for recording doubly charged ion mass spectra using sector instruments. The second method is based on the fact that, although mass remains constant in the charge exchange reaction, the change in mass-to-charge ratio can be followed. A charge exchange linked scan, predicated on changes in charge rather than mass, but otherwise analogous to neutral loss/gain scans, is described. Information on the structure of doubly charged ions can be obtained by recording the fragmentation products of dissociative charge exchange. The utility of the charge exchange linked scan for the selective identification of polynuclear aromatic compounds in a complex mixture is described. The methods given can be generalized to cover other charge permutation reactions.     

Conformer selection of protein ions by ion mobility in a triple quadrupole mass spectrometer

Electrospray mass spectra of multiply charged protein molecules show two distinct charge state distributions proposed to correspond to a more highly charged, open conformational form and a lower charged, folded form. Elastic collisions carried out in the radiofrequency-only collision cell of a triple quadrupole mass spectrometer have dramatic effects on the appearance of the mass spectra. The different cross sectional areas of the conformers allow preferential selection of one charge state distribution over the other on the basis of ion mobility. Preferential selection is dependent on the nature and pressure of the target gas as well as the nature of the protein. In the case of positively charged horse heart apomyoglobin (MW 16,951 da), a high charge state distribution centered around (M + 20H)²⁰⁺ predominates at low target gas pressures and a second distribution centered around (M + 10H)¹⁰⁺ predominates at high target gas pressures. Bimodal distributions are observed at intermediate pressures and, remarkably, charge states between the two distributions are not effectively populated under most of the conditions examined. Hard sphere collision calculations show large differences in collision frequencies and in the corresponding kinetic energy losses for the two conformational states and they demonstrate that the observed charge state selectivity can be explained through elastic collisions.     

Desorption ionization/tandem mass spectrometry with a caesium ion source and a triple quadrupole mass spectrometer

The coupling of a caesium ion source to a triple quadrupole mass spectrometer is described. The potential of this combination for examining thermally labile, non-volatile molecules, such as thiamine hydrochloride, is examined. Emphasis is placed on the advantages the various scanning modes of tandem mass spectrometry provide in ion structure elucidation and the investigation of desorption ionization mechanisms. Use of the caesium ion source for desorption of neutral molecules which are chemically ionized by an auxiliary gas is demonstrated. This procedure may be especially useful for examining non-volatile, non-ionic samples.     

High resolution on a quadrupole ion trap mass spectrometer

By using a modified ion trap mass spectrometer, resolution in excess of 30,000 (FWHM) at m I z 502 is demonstrated. The method of increasing resolution in the ion trap mass spectrometer operated in the mass-selective instability mode depends on decreasing the rate of scanning the primary radio frequency amplitude as well as using resonance ejection at the appropriate frequency and amplitude. A theoretical basis for the method is introduced.     

Investigation of bovine ubiquitin conformers separated by high-field asymmetric waveform ion mobility spectrometry: Cross section measurements using energy-loss experiments with a triple quadrupole mass spectrometer

High-field asymmetric waveform ion mobility spectrometry (FAIMS) was used to separate gas-phase conformers of bovine ubiquitin produced by electrospray ionization. These conformers were sampled by a triple quadrupole mass spectrometer where energy-loss experiments, following the work of Douglas and co-workers, were used to determine their cross sections. The measured cross sections for some conformers were readily altered by the voltages applied to the interface ion optics, therefore very gentle mass spectrometer interface conditions were required to preserve gas-phase conformers separated by FAIMS. Cross sections for 19 conformers (charge states +5 through +13) were measured. Two conformers for the +12 charge state, which were readily separated in FAIMS, were found to have similar cross sections. Based on a method to calibrate the collision gas thickness, the cross sections measured using the FAIMS/energy-loss method were compared with literature values determined using drift tube ion mobility spectrometry. The comparison illustrated that the conformers of bovine ubiquitin that were identified using drift tube ion mobility spectrometry were also observed using the FAIMS device.     

Energy-resolved collisional activation of dimethyl phosphonate and dimethyl phosphite ions in a quadrupole ion trap and a triple quadrupole mass spectrometer

Collision-activated dissociation spectra of dimethyl phosphonate and dimethyl phosphite ions were measured as a function of the amplitude of a supplementary AC voltage applied across the end-caps of an ion-trap mass spectrometer. These spectra yield breakdown graphs which bear a close resemblance to those obtained by varying collision energy in a triple-quadrupole mass spectrometer operating under multiple-collision conditions. Variation in the time of excitation at the resonance frequency provides an alternative route to breakdown graphs. The results demonstrate that energy deposition occurs via multiple activating collisions in the ion trap. Maximum energy deposition observed is somewhat smaller under normal operating conditions in the ion trap than in the triple-quadrupole mass spectrometer.     

The high-pressure segmented quadrupole collision cell (HP-SQCC) as an ion molecule reactor

A high-pressure 20-segment quadrupole collision cell (HP-SQCC), which replaces a collision cell in a modified triple-quadrupole mass spectrometer is investigated in this work as an ion-molecule reactor with an inherent heat source. The highest working pressure achievable is 20 mTorr. The 20 quadrupole segments permit superimposition of linear axial electric field over the conventional quadrupole field in the radial direction. The axial and radial fields are employed to control ion temperature. Heat is transferred to the reactants through ion frictional heating. The HP-SQCC utilizes a combination of several physicochemical phenomena and an attempt is made to examine a range of ion-molecule reactions. Due to a sufficiently large number of reactive collisions, the reactor is used to promote sequential exothermic ion-molecule reactions. To characterize the performance of the HP-SQCC, the various ion-molecule reactions between the fragment ions of ferrocene (Cp(2)Fe), cobaltocene (Cp(2)Co) and nitrogen, oxygen, water and carbon monoxide are investigated.     

Effect of collision gas pressure and collision energy on reactions between oxygen and the negative molecular ion of tetrachlorodibenzo-p-dioxins in the collision cell of a triple -quadrupole mass spectrometer

Low-energy reactive collisions between the negative molecular ion of a tetrachlorodibenzo-p-dioxin (TCDD) and oxygen inside the collision cell of a triple-stage quadrupole mass spectrometer produce a substitution ion [M ? Cl + O]^?, a phenoxide ion [C₆H_4-nO₂Cl_n]^?·, [M ? HCl]^?·, and Cl^? by which 1,2,3,4-, 1,2,3,6/1,2,3,7- and 2,3,7,8-TCDD isomers can be distinguished either directly or on the basis of intensity ratios. The collision conditions have an important effect on the relative abundances. Energy- and pressure-resolved curves show that the ions formed by a collisionally activated reaction (CAR) process, i.e. [M ? Cl + O]^? and [C₆H_4-n,O₂Cl_n]^?·, are favoured by a high pressure of oxygen (3-6 mTorr) (1 Torr = 133.3 Pa) and a low collision energy (0.1-7 eV), whereas the ions formed by a collisionally activated dissociation (CAD) process, i.e. [M ? HCl]^?· and Cl^?, are favoured by high pressure and high energy. By choosing a relatively low collision energy (5 eV) and high pressure (4 mTorr), the CAR and CAD ions can be clearly detected.     

Characterizing ion mobility and collision cross section of fatty acids using electrospray ion mobility mass spectrometry

This study investigated the ion mobility (IM) and the collision cross section (CCS) of fatty acids (FAs) using electrospray IM MS. The IM analysis of 18 FA ions showed intriguing differences among the saturated FAs, monounsaturated FAs, multi‐unsaturated FAs, and cis‐isomer/trans‐isomer with respect to the aliphatic tail chains. The length of aliphatic tail chain present in the ion structures had a strong influence on the differentiation of drift, while the number of double bond showed a weaker influence. The tiny drift differences between cis‐isomer and trans‐isomer were also observed. In the CCS measurements, two internal standards were involved in the mobility calibration and accuracy estimation. It insured our empirical CCS values were of high experimental precision (±0.35% or better) and accuracy (±0.25% or better). Moreover, the mass‐to‐charge ratio (m/z) – mobility plots obtained by ion mobility spectrometry with mass spectrometry analysis of FAs – was used to investigate the structural relationship between the molecules. Each series of FAs sharing a similar structure was aligned in the linear plot. Finally, the developed procedure was applied to the determination of FAs in rat adipose tissues, and it allowed the presence of 13 FAs to be confirmed with their exact masses and CCS values. These studies reveal the direct relationship between the behaviors in IM and the molecular structures and thus may provide further validations to the FA identification process. Copyright © 2015 John Wiley & Sons, Ltd.     

Internal pulsed valve sample introduction on a quadrupole ion trap mass spectrometer

A pulsed valve positioned just outside the ion trap electrodes (within the vacuum chamber) has been characterized. The observed gas pulse widths and the maximum ion intensities were found to decrease as the distance between the pulsed valve and the ion trap electrodes increased. An explanation is presented within. The pulsed valve was found to impart temporal separation in ion-molecule reactions by permitting the removal of interfering neutrals. Other factors that affect the degree of temporal separation also are presented.     

Novel ion mobility setup combined with collision cell and time-of-flight mass spectrometer

An ion mobility cell of a novel type was coupled to an orthogonal injection time-of-flight (TOF) mass spectrometer. The mobility cell operates at low-pressure and contains a segmented RF ion guide providing an axial electric field that drives the ions towards the exit. A flow of gas is arranged inside the ion guide in such a way that the gas drag counteracts the force exerted by the axial field. Ions with different mobility coefficients can be scanned out of the ion guide by ramping the axial field strength. The ions can be analyzed intact or fragmented in a collision cell before introduction into an orthogonal TOF mass spectrometer. An ion source with matrix assisted laser desorption/ionization (MALDI) was attached to the instrument. The setup was evaluated for the analysis of peptide and protein mixture, with sequential fragmentation of multiple precursor ions from a protein digest and with mobility separation of fragment ions formed by in-source fragmentation of pure peptides. The mobility resolution for peptides was observed to be three times higher than the theoretical resolution predicted for a classical mobility setup with similar operating conditions (pressure, field strength, and length).     

Analytical approach for description of ion motion in quadrupole mass spectrometer

Implementation of the analytical method of the solution of the Mathieu equation in conjunction with the algebraic presentation of Mathieu functions is discussed in this work. This approach is used for the analytical expression of fundamental properties of the quadrupole field such as ion trajectory stability and transmission. Extensive comparison with the matrix method is presented with demonstration of the fundamental advantages of the analytical method. However, contrary to the matrix method, the analytical method is limited to the cos trapping waveforms.     

Thermospray liquid chromatography-mass spectrometry with a quadrupole ion trap mass spectrometer

A theromospray ion source using corona discharge ionization was interfaced to a quadrupole ion trap mass spectrometer via a multi-element lens system. Ions were injected into the trap periodically where they were stabilized by collisions with helium bath gas. Mass spectra were recorded on the trapped ions using the mass-selective instability scan mode. Data are shown for a peptide and a nucleoside and the effects of some experimental variables on the spectra are explored.     

The use of a triple quadrupole linear ion trap mass spectrometer with electrospray ionisation for fragmentation studies of selected antifungal drugs

Fragmentation studies of three antifungal drugs, clotrimazole, fluconazole and clioquinol ,were performed. A triple quadrupole linear ion trap mass spectrometer was used for this purpose. This type of equipment enables MS(3) spectra to be obtained which lead to better understanding of fragmentation pathways. Nevertheless, it is rarely used for fragmentation studies. The results obtained here for the antifungal drugs gave further insight into fragmentation pathways of clotrimazole and fluconazole. Moreover, fragmentation of clioquinol was investigated which had not been presented before.     

Biopolymer sequencing using a triple quadrupole mass spectrometer in the ESI nozzle-skimmer/precursor ion MS/MS mode

A variety of model biopolymers, including oligonucleotides, oligosaccharides and a synthetic pharmaceutical agent, were sequenced using a triple quadrupole mass spectrometer equipped with an electrospray source and operated in a scan mode referred to as pseudo-MS3. This scan mode consists of three steps: (1) in-source collision-induced dissociation (CID) in the nozzle-skimmer (NS) region, (2) scanning of the fragment ions into the collision cell for further CID, and (3) passing of the secondary fragment ions through the final mass filter at a preselected mass, generally corresponding to the mass of a terminal sequence ion for the biopolymer. The mass spectra are recorded in the precursor ion MS/MS mode where ion selection and detection occur at the third stage of the triple quadrupole but the scan function is determined by the first stage. The advantages and limitations in using this pseudo-MS3 NS/precursor ion MS/MS scan mode for biopolymer sequencing are discussed.     

Surface-induced dissociation of molecular ions in a quadrupole ion trap mass spectrometer

A method is reported by which surface-induced dissociation is used to activate ions stored in a quadrupole ion trap mass spectrometer. The method employs a short (< 5 μs), fast-rising (< 20-ns rise time), high voltage direct current (dc) pulse, which is applied to the endcaps of a standard Paul-type quadrupole ion trap. This is in contrast to the application of an alternating current (ac) signal normally used to resonantly excite and dissociate ions in the trap. The effect of the dc pulse is to cause the ions rapidly to become unstable in the radial direction and subsequently to collide with the ring electrode. Sufficient internal energy is acquired in this collision to cause high energy fragmentations of relatively intractable molecular ions such as pyrene and benzene. The dissociations of limonene are used to demonstrate that high energy demand processes increase in relative importance in the dc pulse experiment compared with the usual resonance excitation method used to cause activation. The fragments are scanned out of the ion trap using the conventional mass-selective instability scan mode. Simulations of ion motion in the trap provide evidence that surface collisions occur at kinetic energies in the range of tens to several hundred electronvolts. The experiments also demonstrate that production of fragment ions is sensitive to the phase of the main radiofrequency drive voltage at the point when the dc is initiated.