Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.     

Conformations of hydrophobic polyelectrolytes

Recent studies on the (hypercoiled) compact conformation and the pH-induced conformational transition to the extended coil of the hydrophobic poly(acids or bases), which have been well used in industrial and medical circles, are summarized, especially on the basis of our studies on poly(alpha-alkyl acrylic acids) and maleic acid copolymers with hydrophobic aromatic monomers. The stability of the compact conformation and values of various thermodynamic parameters of the transition of the hydrophobic polyelectrolytes suggest the importance of hydrophobic interaction among the side chains to form the compact conformation. Characterization of various physicochemical methods, including 1H-NMR measurements, gives a model of the compact conformation with a more expanded structure than in globular proteins, a free-draining property of the solvent, the conformation fluctuation, etc. Also, the apparent two-state character of each segment in the transition region, a life-time in each state and the cooperative parameter for the compact form formation are discussed. A review of our conformational studies on the hydrophobic-hydrophilic polypeptides is also given. For the anion-induced conformation transition in basic homopoly(alpha-amino acids), hydrophobic characters of the anion and the side chain in the polypeptide are shown to be important, especially in terms of solvation. The difference in the induced conformation by the anion between random and alternating basic copolypeptides is explained by introducing a model which shows the importance of the sequence of hydrophobic and hydrophilic residues in the polypeptide to induce the ordered conformation of the anions. Also, we attempt to explain the difference between the induction of ordered conformation in the basic homo- or copolypeptide in reversed micelles with a large sulfonate (AOT) vs. that in aqueous AOT in terms of the hydrophobic character of the side chains in the polypeptides, AOT and the medium.     

Conformations of hydrophobic polyelectrolytes

Recent studies on the (hypercoiled) compact conformation and the pH-induced conformational transition to the extended coil of the hydrophobic poly(acids or bases), which have been well used in industrial and medical circles, are summarized, especially on the basis of our studies on poly(α-alkyl acrylic acids) and maleic acid copolymers with hydrophobic aromatic monomers. The stability of the compact conformation and values of various thermodynamic parameters of the transition of the hydrophobic polyelectrolytes suggest the importance of hydrophobic interaction among the side chains to form the compact conformation. Characterization of various physicochemical methods, including ¹H-NMR measurements, gives a model of the compact conformation with a more expanded structure than in globular proteins, a free-draining property of the solvent, the conformation fluctuation, etc. Also, the apparent two-state character of each segment in the transition region, a life-time in each state and the cooperative parameter for the compact form formation are discussed.A review of our conformational studies on the hydrophobic-hydrophilic polypeptides is also given. For the anion-induced conformation transition in basic homopoly(α-amino acids), hydrophobic characters of the anion and the side chain in the polypeptide are shown to be important, especially in terms of solvation. The difference in the induced conformation by the anion between random and alternating basic copolypeptides is explained by introducing a model which shows the importance of the sequence of hydrophobic and hydrophilic residues in the polypeptide to induce the ordered conformation of the anions. Also, we attempt to explain the difference between the induction of ordered conformation in the basic homo- or copolypeptide in reversed micelles with a large sulfonate (AOT) vs. that in aqueous AOT in terms of the hydrophobic character of the side chains in the polypeptides, AOT and the medium.     

Dilational viscoelasticity and relaxation properties of interfacial electrostatic complexes between oppositely charged hydrophobic and hydrophilic polyelectrolytes

Strongly adsorbing hydrophobic cationic polyelectrolyte, Eudragit RS, containing approximately 2.5 mol% of pendent hydrophilic trimethylammonium (TMA) groups irreversibly adsorbs from its methylene chloride (MCl) solution at the MCl/water interface and forms solid-like adsorption layers (ALs). Submitted to periodic dilational deformations with the standard radial frequency omega(0)=0.63 rad/s, these ALs exhibit relatively high dilational storage modulus E' approximately 20 mN/m and practically zero loss modulus E' at the bulk concentration C(Eud)=4 x 10(-3)g/L. The frequency scanning of these ALs in the diapason omega=0.01-0.63rad/s and the approximation of the experimental dependences E'(omega) and E'(omega) by two relaxation times rheological model makes it possible to estimate the crossing frequency of these ALs determined from the condition E'(omega(c))=E'(omega(c)) as omega(c) approximately 5 x 10(-4)rad/s. Upon dissolving the hydrophilic anionic polyelectrolyte, chitosan sulfate (ChS), in the water phase (C(ChS)=3 x 10(-2)g/L) the electrostatic interpolyelectrolyte complexes form at the MCl/water interface. The elasticity moduli E' and E' of these mixed AL did not undergo remarkable variations, but the crossing frequency is sharply increased by approximately 10 times becoming equal to omega(c) congruent with 3 x 10(-3)rad/s. The increase of omega(c) certifies for the liquefaction of mixed Eudragit RS/ChS adsorption layers. A remarkable decrease of the storage modulus down to E'=8 mN/m and simultaneous increase of the crossing frequency up to omega(c) congruent with 10(-2)rad/s occurs upon increasing the concentrations of both components, Eudragit RS and ChS, up to 0.1g/L. The liquefaction effect in the mixed ALs of oppositely charged polyelectrolytes was explained on the basis of the proposed relaxation mechanism. The effect of the liquefaction of adsorption layers of strongly adsorbing hydrophobic polyelectrolytes by formation of interpolyelectrolyte complexes with hydrophilic polyelectrolytes must be taken into account in the production of nano-capsules and nano-fibers.     

Structure of salted and discharged globules of hydrophobic polyelectrolytes adsorbed from aqueous solutions

In this article, we compare structures of protonated poly(2-vinylpyridine) globules (2D compact coils on the surface) adsorbed on the mica surface from aqueous solution when the shrinking is brought about either by discharging the molecules at an elevated pH or by adding monovalent and polyvalent salts. We study the structure of the PE coils using in situ atomic force microscopy experiments in aqueous solutions in a liquid cell. The abrupt coil-to-globule transition caused by pH changes and the discharge of polymer chains resulted in compact globules. If the pH corresponding to extended coil conformation remains unchanged, the coil shrinks due to the added salt. The size of the globule in the latter case corresponds to the unperturbed dimension of the polymer coil. There is no essential difference in the dimensions of the globules as obtained in the presence of monovalent and multivalent counterions for the studied ionic strength. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1623–1627, 2010     

Influence of water on the surface of hydrophilic and hydrophobic room-temperature ionic liquids

Vibrational spectroscopy, sum frequency generation, has been used to study the gas-liquid interface of imidazolium-based, room-temperature ionic liquids. The ionic liquids are divided into two categories on the basis of their miscibility with water, as hydrophobic (immiscible) and hydrophilic (miscible). The spectroscopy results indicate that water will reorient the cations of the hydrophobic ionic liquid, while in the hydrophilic ones they remain unaffected. Thus, under low water conditions the plane of the imidazolium ring remains parallel to the surface for both types of ionic liquid. However, at high water content the ring will reorient to along the surface normal for the hydrophobic ionic liquid but remain parallel to the surface for the hydrophilic one. This is a reversible process.     

Capillary zone electrophoresis of sub-microm-sized particles in electrolyte solutions of various ionic strengths: size-dependent electrophoretic migration and separation efficiency

To gain insight into the mechanisms of size-dependent separation of microparticles in capillary zone electrophoresis (CZE), sulfated polystyrene latex microspheres of 139, 189, 268, and 381 nm radius were subjected to CZE in Tris-borate buffers of various ionic strengths ranging from 0.0003 to 0.005, at electric field strengths of 100-500 V cm(-1). Size-dependent electrophoretic migration of polystyrene particles in CZE was shown to be an explicit function of kappaR, where kappa(-1) and rare the thickness of electric double layer (which can be derived from the ionic strength of the buffer) and particle radius, respectively. Particle mobility depends on kappaR in a manner consistent with that expected from the Overbeek-Booth electrokinetic theory, though a charged hairy layer on the surface of polystyrene latex particles complicates the quantitative prediction and optimization of size-dependent separation of such particles in CZE. However, the Overbeek-Booth theory remains a useful general guide for size-dependent separation of microparticles in CZE. In accordance with it, it could be shown that, for a given pair of polystyrene particles of different sizes, there exists an ionic strength which provides the optimal separation selectivity. Peak spreading was promoted by both an increasing electric field strength and a decreasing ionic strength. When the capillary is efficiently thermostated, the electrophoretic heterogeneity of polystyrene microspheres appears to be the major contributor to peak spreading. Yet, at both elevated electric field strengths (500 V/cm) and the highest ionic strength used (0.005), thermal effects in a capillary appear to contribute significantly to peak spreading or can even dominate it.     

Interactions between a polystyrene particle and hydrophilic and hydrophobic surfaces in aqueous solutions

The interaction between a colloidal polystyrene particle mounted on an AFM cantilever and a hydrophilic and a hydrophobic surface in aqueous solution is investigated. Despite the apparent simplicity of these two types of systems a variety of different types of interactions are observed. The system containing the polystyrene particle and a hydrophilic surface shows DLVO-like interactions characteristic of forces between charged surfaces. However, when the surface is hydrophobized the interaction changes dramatically and shows evidence of a bridging air bubble being formed between the particle and the surface. For both sets of systems, plateaus of constant force in the force curves are obtained when the particle is retracted from the surface after being in contact. These events are interpreted as a number of individual polystyrene molecules that are bridging the polystyrene particle and the surface. The plateaus of constant force are expected for pulling a hydrophobic polymer in a bad (hydrophilic) solvent. The plateau heights are found to be of uniform spacing and independent of the type of surface, which suggests a model by which collapsed polymers are extended into the aqueous medium. This model is supported by a full stretching curve showing also the backbone elasticity and a stretching curve obtained in pentanol, where the plateau changes to a nonlinear force response, which is typical for a polymer in a good or neutral solvent. We suggest that these polymer bridges are important in particular for the interaction between polystyrene and the hydrophilic surface, where they to some extent counteract the long-range electrostatic repulsion.     

Synthesis and characterization of dicationic ionic liquids that contain both hydrophilic and hydrophobic anions

A series of dicationic ionic liquids, in which each dication is associated with both a hydrophobic anion and a hydrophilic anion, are synthesized. The thermal properties and solubility in organic solvents of these ILs are characterized. The ionic liquids show interesting properties, which are different from those of dicationic ionic liquids, in which each dication is associated with two identical anions.     

Thermal and ion transport properties of hydrophilic and hydrophobic polymerized styrenic imidazolium ionic liquids

Polymerized ionic liquids (PILs) are a platform for fundamental studies of structure‐property relationships in single ion conductors, with potential applications in energy storage and conversion. The synthesis, thermal properties, and ionic conductivities of homologous, narrow dispersity styrenic PILs are described. Hydrophilic poly(4‐vinylbenzyl alkylimidazolium chloride) (PVBn(alkyl)ImCl) homopolymers with constant average degrees of polymerization were synthesized by post‐synthetic functionalization of a poly(4‐vinylbenzyl chloride) (M_n = 15.9 kg/mol, M_w/M_n = 1.34) master batch with N‐alkylimidazoles (alkyl = ? CH₃ (Me), ? C₄H₉ (Bu), and ? C₆H₁₃ (Hex)). The chloride counterions of PVBnHexImCl were exhaustively metathesized with BF, PF, and bis(trifluoromethanesulfonyl)imide (TFSI^?) to yield a series of hydrophobic PILs. Thermogravimetric analyses indicate that PVBn(alkyl)ImCl homopolymers are unstable above 220 °C, whereas the hydrophobic PILs remain stable up to 290 °C. The glass transition temperatures (T_g) decrease with both increasing alkyl side‐chain length and increasing counterion size, exemplified by T_g = 9 °C for PVBnHexImTFSI. Hydrophilic PILs exhibit high ionic conductivities (as high as ～0.10 S cm^?1) that depend on the relative humidity, water uptake, and the PIL side chain length. The hydrophobic PILs exhibit lower conductivities (up to ～5 × 10^?4 S cm^?1) that depend predominantly on the polymer T_g, however, counterion size and symmetry also contribute. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1287–1296, 2011     

Conformational transitions of flexible hydrophobic polyelectrolytes in solutions of monovalent and multivalent salts and their mixtures

Conformations of cationic polyelectrolytes (PEs), a weak poly(2-vinylpyridine) (P2VP) and a strong poly(N-methyl-2-vinylpyridinium iodide) (qP2VP), adsorbed on mica from saline solutions in the presence of counterions of different valences are studied using in situ atomic force microscopy (AFM). Quantitative characteristics of chain conformations are analyzed using AFM images of the adsorbed molecules. The results of the statistical analysis of the chain contour reveal collapse of the PE coils when ionic strength is in a range from tens to hundreds of millimoles per kilogram and re-expansion of the coils with a further increase of ionic strength up to a region of the saturated saline solutions. The competition between monovalent and multivalent counterions simultaneously present in solutions strongly affects conformations of PE chains even at a very small fraction of multivalent counterions. Shrinkage of PE coils is steeper for multivalent counterions than for monovalent counterions. However, the re-expansion is only incremental in the presence of multivalent counterions. Extended adsorbed coils at low salt concentrations and at very high concentrations of monovalent salt exhibit conformation corresponding to a 2D coil with 0.95 fraction of bound segments (segments in "trains") in the regime of diluted surface concentration of the PE. Shrunken coils in the intermediate range of ionic strength resemble 3D-globules with 0.8 fraction of trains. The incrementally re-expanded PE coils at a high ionic strength remain unchanged at higher multivalent salt concentrations up to the solubility limit of the salt. The formation of a strong PE complex with multivalent counterions at high ionic strength is not well understood yet. A speculative explanation of the observed experimental result is based on possible stabilization of the complex due to hydrophobic interactions of the backbone.     

Nano-biphasic ionic liquid systems composed of hydrophobic phosphonium salts and a hydrophilic ammonium salt

A combination of a phosphonium-type-zwitterions-lithium bis(trifluoromethanesulfonyl)imide complex and a hydrophilic ammonium salt provides a nanosegregated liquid-crystalline matrix consisting of hydrophilic ionic liquid (IL) domains and hydrophobic IL domains.     

Sliding of water droplets on hydrophobic surfaces with various hydrophilic region sizes

Four patterned surfaces with hydrophilic areas of different sizes were prepared using photolithography with a smooth octadecyltrimethoxysilane (ODS) hydrophobic coating. The hydrophilic area in the surfaces was aligned hexagonally with a constant area fraction. The sliding angle and contact angle hysteresis of the water droplets increased concomitantly with increasing pattern size. The increase of the contact line distortion between defects at the receding side plays an important role in this trend. The droplet sliding velocity also increased concomitantly with increasing pattern size. This trend was simulated by a simple flow model. The contribution of the interface between the ODS region and the hydrophilic area was deduced from this trend. This study demonstrated the different size dependency of the chemical surface defects for sliding behavior between the critical moment at which a droplet slides down and the period when a droplet is sliding.     

Interaction of monovalent ions with hydrophobic and hydrophilic colloids: charge inversion and ionic specificity

Here we study experimentally and by simulations the interaction of monovalent organic and inorganic anions with hydrophobic and hydrophilic colloids. In the case of hydrophobic colloids, our experiments show that charge inversion is induced by chaotropic inorganic monovalent ions but it is not induced by kosmotropic inorganic anions. For organic anions, giant charge inversion is observed at very low electrolyte concentrations. In addition, charge inversion disappears for both organic and inorganic ions when turning to hydrophilic colloids. These results provide an experimental evidence for the hydrophobic effect as the driving force for both ion specific effects and charge inversion. In the case of organic anions, our molecular dynamics (MD) simulations with full atomic detail show explicitly how the large adsorption free energies found for hydrophobic colloids are transformed into large repulsive barriers for hydrophilic colloids. Simulations confirm that solvation free energy (and hence the hydrophobic effect) is responsible for the build up of a Stern layer of adsorbed ions and charge inversion in hydrophobic colloids and it is also the mechanism preventing charge inversion in hydrophilic colloids. Overall, our experimental and simulation results suggest that the interaction of monovalent ions with interfaces is dominated by solvation thermodynamics, that is, the chaotropic/kosmotropic character of ions and the hydrophobic/hydrophilic character of surfaces.     

Conjugated polyelectrolytes with pH-dependent conformations and optical properties

We report here the synthesis and characterization of two new conjugated polymers: poly{2,5-bis[3-(N,N-diethylammonium acetate)-1-oxapropyl]-1,4-phenylenevinylene} (P1') and poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene} (P2). Both polymers exhibit unique pH-dependent optical properties in aqueous solution. These pH-dependent optical properties are attributed to the mutual electrostatic repulsions of positive charges pendent on the benzene rings. This electrostatic repulsion leads to an increased or decreased torsional angle in the conjugated backbone, thus affecting the effective conjugation length of these polymers. The UV-vis spectra of P1 in various pH solutions exhibit a near-isosbestic point, which indicates changes in the composition of the two distinct conformations (the charged and the neutral forms). The transition between the highly charged state and the neutral state was clearly observed in the UV-vis and photoluminescence studies on both P1 and P2. This transition is particularly sensitive in the pH range from 6.2 to 7.0, a range that would allow the detection of minor environmental changes. P2 has a quantum efficiency of 14% in water, which is considered to be relatively high among water-soluble PPVs.     

Dimensions of a free linear polymer and polymer immobilized on silica nanoparticles of a zwitterionic polymer in aqueous solutions with various ionic strengths

The dimensions and intermolecular interactions of a surface-grafted and unbound free polyampholyte, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), were estimated in aqueous solutions with various ionic strengths. Free linear PMPC was synthesized by atom-transfer radical polymerization (ATRP), and static light scattering (SLS) and dynamic light scattering (DLS) were carried out for the PMPC solutions with various concentrations of NaCl, c s. The hydrodynamic radius R H and the second virial coefficient A 2 of PMPC were independent of c s (0-0.5 M), though both R H and A 2 of polyampholytes usually strongly depend on the ionic strength. PMPC-immobilized silica nanoparticles (PMPC-SiNP) were also synthesized by surface-initiated ATRP, and DLS was carried out as for the solutions of linear PMPC to investigate the dependence of the dimensions of PMPC immobilized on a solid surface on the ionic strength. The molecular weight and surface density of PMPC immobilized on SiNP were estimated from the results obtained by GPC, NMR, and thermogravimetric analysis. The independence of R H of PMPC-SiNP was also observed, but its magnitude was larger than that of linear PMPC, although the molecular weight of PMPC immobilized on SiNP was smaller than that of linear PMPC. The larger dimension of PMPC immobilized on SiNP was explained by the excluded volume effect between the immobilized polymer chains.