二溴邻羧基偶氮氯膦光度测定铝合金中微量锶

本介绍在一定量钙、钡共存下测定锶的新方法。在０．４８ｍｏｌ／Ｌ Ｈ２ＳＯ４介质中，二溴邻羧基偶氮氯膦与锶形成２：１的蓝色络合物，最大吸收波长为６３０ｎｍ。摩尔吸光系数为３．２×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，锶量在０－１ｍｇ／Ｌ范围内符合比耳定律，经过二氧化锰共沉淀分离富集后，可测定各种复杂铝合金样品中痕量锶。     

砷的氢催化波研究及硫中微量砷的测定

砷在１．５×１０＾－４ｍｏｌ／Ｌ Ｃｏ－０．１ｍｏｌ／Ｌ ＫＣＮＳ－１％抗坏血酸－０．７ｍｏｌ／Ｌ Ｎａ２ＳＯ４－４×１０＾－３ｍｏｌ／Ｌ ＮａＢｒ介质中产生一灵敏催化波，峰电位为－１．１Ｖ。采用微分脉冲极谱法研究了各项实验条件，建立了直接测定硫中微量砷的方法。该法简便快速，结果满意。     

催化动力学光度法测定痕量苯酚

研究了在硫酸介质中苯酚对Ｉ＾－１催化Ｃｅ＾４＋－Ａｓ（Ⅲ）反应的抑制作用及其动力学条件。建立了用催化动力这光度法测定痕量苯酚的新方法，结果表明，在０．００１ｍｏｌ／ＬＣｅ（ＳＯ４）２，０．００１２５ｍｏｌ／Ｌ，Ａｓ２Ｏ３，０．０１ｍｇ／Ｌ，ＫＩ，０．０１２５ｍｏｌ／Ｌ，Ｈ２ＳＯ４和０．１３％（ｗ／ｖ）ＮａＣｌ溶液中测定苯酚，其表面摩尔吸光系数为２．１×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，线性范围     

脱氧核糖核酸（DNA）的极谱伏安行为研究

研究了脱氧核糖核酸的极谱伏安行为，在０．１ｍｏｌ．Ｌ＾－１ＮＨ４Ｃｌ溶液中ＤＮＡ产生一良好的极谱峰，峰电位Ｅｐ＝－１．６５Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ），且峰电流ｉｐ与ＤＮＡ的浓度在４．５＊１０＾－５－３．７＊１０＾－４ｍｏｌ．ＬＯ＾－１范围内呈线性关系，可望用于ＤＮＡ的定量分析。     

阴离子表面活性剂—溴化十二烷基二甲基苄基铵—溴百里酚蓝显色反应…

本文研究了溴化十二烷基二甲基苄铵－溴百里酚蓝与阴离子表面活性剂显色反应的适宜条件结果表明，在ｐＨ７．４～８．２范围内阴离子表面活性剂与题示试剂形成１：２：１的绿色离子缔合物，其最大吸收峰位于６１４ｎｍ处。表观摩尔吸光系数分别为ε＾ＳＤＢＳ６１４＝３．９９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１；ε＾ＳＤＳ６１４＝３．７０×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，ε＾ＳＬＳ６１４＝１．７１×１０＾４Ｌ．     

二溴对甲偶氮羧的合成及其用于分光光度法测定钡

研究了钡的新显色剂二溴对甲偶氮羧的合成及其与钡显色反应的条件。在磷酸介质中，试剂与钡形成２：１的络合物，吸收峰位于６０９ｎｍ。摩尔吸光系数为２．０５×１０＾４Ｌ·ｍｏｌ＾－１·ｃｍ＾－１。钡量在０￣１．６ｍｇ／Ｌ范围内符合比耳定律，显色体系具有很高的选择性，大量常见离子及４０倍量的钙，７倍量的锶不影响测定，可不经分离，直接测定新型除氧剂中的钡，结果令人满意。     

KBrO3—KBr紫外分光光度法测定痕量水杨酸

研究了ＨＣｌ溶液中ＫＢｒＯ３－ＫＢｒ紫外分光光度法测定水杨酸的条件,建立了测定痕量水杨酸的新方法。结果表明,在０．６ｍｏｌ／ＬＨＣｌ,３＊１０＾－５ｍｏｌ／ＬＫＢｒＯ３,５＊１０＾－４ｍｏｌ／ＬＫＢｒ,６＊１０＾－４ｍｏｌ／ｌＫＩ溶中测定水杨酸,其线性范围为０．２－４．０ｍｇ／Ｌ,表观摩尔吸光系数为１．９＊１０＾－４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１,Ｓａｎｄｅｌｌ为７．３μｇ／ｃｍ＾２。ｓｇ ｉｆ ｅ     

含有吸附络合物溶液的倒数示波计时电位法的应用

Ｐｂ（Ⅱ）在０．２％乙二胺－５×１０＾－３ｍｏｌ·Ｌ＾－１ＨＯｘ－０．３ｍｏｌ·Ｌ＾－１ＫＯＨ溶液中，有良好的全数示波图，其峰电位Ｅｐ＝－１．０５（ｖｓ．ＳＣＥ），峰高与Ｐｂ＾２＋溶度在４．０×１０＾－７～２．０×１０＾－５ｍｏｌ·Ｌ＾－１内成正比，检测下限可达２．０×１０＾－７ｍｏｌ·Ｌ＾－１。本实验采用倒数示波计时电位法对铝合金“Ａ”中铅进行了测定，并直接通过示波图，对络合物的吸附属于性进行了     

阿霉素在钴离子注入修饰电极上的电化学行为及其应用

阿霉素在０．１ｍｏｌ／Ｌ ＨＡｃ－ＮａＡｃ（ｐＨ４．６２）缓冲溶液中用注入钴的修饰玻碳电极为工作电极进行伏安测定,得到一良好的还原峰;Ｅｐ＝－０．５２２Ｖ（ｖｓ．ＳＣＥ）。峰电流与阿霉素浓度在１．４×１０＾－６－１．４×１０＾－６ｍｏｌ／Ｌ和１．４×１０＾－６－５．６×１０＾－５ｍｏｌ／Ｌ范围内呈线性关系,。     

新显色剂二溴对甲基偶氮磺光度测定铅的研究与应用

在０．２４ｍｏｌ．Ｌ＾－１Ｈ３ＰＯ４介质中，铅与二溴对甲基偶氮磺形成１：２的蓝色配合物，最大吸收波长在６３０ｎｍ表现摩尔吸光系数为７．９９×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１铅量在０－２０μｇ／２５ｍＬ，内符合比耳定律，方法应用于铜合金中微量铅的测定，结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.