银纳米微球和银纳米棒自组装膜的制备及SERS研究

采用硼氢化钠还原硝酸银,用振荡器在不同转速下振荡得到单分散的银纳米微球和银纳米棒,再将银纳米微球及银纳米棒自组装于被3-氨丙基-三甲氧基硅烷(APTMS)修饰的玻璃基片上,制得了具有表面增强拉曼(SERS)活性的基底,分别以罗丹明6G(R6G)和罗丹明B(RB)为探针分子对这两种基底进行SERS活性检测,结果发现这两种基底均为较理想的SERS衬底。     

PAA模板体系中CuS纳米棒的自组装合成

合成不同相对分子质量的聚丙烯酸(PAA),并以之为模板,在稀溶液中利用离子的自组装合成CuS中空纳米棒,棒平均直径在60~70 nm之间。结果表明,PAA可很好地作为室温下合成CuS纳米棒的模板剂,体系的pH值、PAA浓度、PAA相对分子质量等条件对生成物的微观形态均有影响。     

重氮树脂与银纳米颗粒自组装膜的图像化

从巯基乙酸包覆的银纳米颗粒(MA-AgNP)和重氮树脂(DR)由自组装方法, 制备了感光性的超薄膜. 在掩模(photomask)覆盖下对膜进行选择性曝光和紧接着的十二烷基硫酸钠水溶液显影, 未光照部分的膜被显影液完全洗脱, 而光照部分的膜不能洗脱, 从而形成清晰的图像. 用AFM和SEM对图像进行了表征.     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。     

铁表面银纳米粒子自组装膜及其缓蚀性能研究

应用化学还原法于水溶液中制备银纳米粒子.在十二烷基硫醇的保护下,将银纳米粒子从水相转移到甲苯相,并将处理好的铁电极浸泡在含有十二烷基硫醇保护的银纳米粒子/甲苯溶液中,制得十二烷基硫醇/银纳米粒子自组装混合膜.电化学方法如交流阻抗谱（EIS）、极化曲线等研究该自组装膜在0.5 mol.L-1H2SO4溶液中的缓蚀作用.XPS测试证实该自组装膜十二烷基硫醇和银纳米粒子之存在.     

毛细压力法组装纳米聚合物微球的二维有序排列

通过半连续乳液聚合的方法获得了单分散性好,数均粒径为７０６９ｎｍ的苯乙烯,丙烯酸丁酯和丙烯酸（Ｓｔ／ＢＡ／ＡＡ）高分子微球,并通过毛细压力法,成功地在玻璃基体上组装成了紧密的二维有序排列点阵结构．点阵结构的形成过程可分为成核和增长两个阶段．在二维有序排列形成过程中,微粒之间的相互排斥作用可通过添加一定浓度的电解质来进行调节．组装后的二维有序排列用扫描电镜进行了观察．     

高透光性有序银网阵列的制备

以水珠为模板制备了聚己内酯(PCL)有序多孔膜. 利用水珠在冷的高分子溶液表面凝结形成有序阵列, 溶剂蒸发后, 高分子材料按照水珠排列的形貌形成了有序多孔膜. 改变蒸发溶液的体积可得到具有透光性的有序贯通膜, 对该膜喷金后在银溶液中置换得到了有序银网阵列膜. 这种银网阵列不仅能够导电, 而且比聚己内酯阵列膜具有更高的透光性和柔韧性.     

模板法组装微米级微球

运用毛细微模塑(MIMIC)技术, 排列得到了线状和折叠状微球串, 并对MIMIC驱动微球自组装的机理进行了初步研究; 借助微液滴做模板, 排列得到含有不同数目的微球环或准环. 加热到微球的软化温度以上, 使紧密挨着的微球相互粘接, 然后溶解掉底膜, 获得了自由的刚性微球串. 期望改变微球的联结方式, 以获得自由的柔性微球串, 如果把单个微球看作高分子的“链节单元”, 微球串就近似地看作高分子链的简单直接“模型”, 有望用来模拟高分子凝聚态基本物理问题.     

图案化TiO2薄膜的制备技术

本文综述了图案化TiO2薄膜的制备技术,按图案的生成方式可分为图案的直接生成,掩膜复制法,硬质模板复制法三大类。可以通过针尖写蚀法、电子书写蚀法、激光写蚀法、自组装法、光电化学法直接制备图案。掩膜复制法包括光刻胶法、自组装膜法、光敏凝胶膜法等。硬质模板法也称软刻蚀技术,分为复制微模塑、转移微模塑、毛细管微模塑、微接触印刷法、光-盖印印刷等技术。对每类方法的优缺点作了适当评述,对今后图案化TiO2薄膜制备的研究方向提出了一些建议。     

A Simple Method for Fabricating Patterned Curvilinear Microstructures in Poly(dimethylsiloxane) by Selective Wetting

The fabrication of patterned microstructures in poly(dimethylsiloxane) (PDMS) is a prerequisite for soft lithography. Herein, curvilinear surface relief microstructures in PDMS are fabricated through a simple three‐stage approach combining microcontact printing (μCP), selective surface wetting/dewetting and replica molding (REM). First, using an original PDMS stamp (first‐generation stamp) with linear relief features, a chemical pattern on gold substrate is generated by μCP using hexadecanethiol (HDT) as an ink. Then, by a dip‐coating process, an ordered polyethylene glycol (PEG) polymer‐dot array forms on the HDT‐patterned gold substrate. Finally, based on a REM process, the PEG‐dot array on gold substrate is used to fabricate a second‐generation PDMS stamp with microcavity array, and the second‐generation PDMS stamp is used to generate third‐generation PDMS stamp with microbump array. These fabricated new‐generation stamps are utilized in μCP and in micromolding in capillaries (MIMIC), allowing the generation of surface micropatterns which cannot be obtained using the original PDMS stamp. The method will be useful in producing new‐generation PDMS stamps, especially for those who want to use soft lithography in their studies but have no access to the microfabrication facilities.     

十八硫醇自组装膜对TiO2光电氧化甲醇的敏化作用

纳米电极;甲醇光电氧化;十八硫醇自组装膜对TiO2光电氧化甲醇的敏化作用     

A Simple,Low-cost Method to Fabricate Drag-reducing Coatings on a Macroscopic Model Ship

A low-cost method was used to fabricate superhydrophobic coatings on a macroscopic model ship and the drag-reducing effect was investigated at both low and high speed. Hierarchical structures of the superhydrophobic copper coatings were characterized by means of scanning electron microscopy(SEM) and X-ray diffraction(XRD). Drag coefficient tests on surfaces with different wettability(superhydrophilic, hydrophilic, hydrophobic and superhydrophobic surfaces) showed that the as-prepared superhydrophobic surface exhibited a high remarkable drag reduction of 81% at a low speed of 1 mm/s. In the drag-reducing tests with model ship, the superhydrophobic coatings also exhibited around 16% drag reduction at a velocity of 0.3 m/s.     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.     

Synthetic Ionophores. Part 20: Synthesis and Ionophore Character of 2-Aminothiophenol and 1,3-/1,4-Phenylene Based Silver Selective Receptors

Nucleophilic displacements of 1,3- and 1,4-bis(bromomethyl)benzenes with 2-aminothiophenol provide 1,3- and 1,4- bis(2-aminophenylthiomethyl)benzenes 3 and 11 which undergo intermolecular cyclodehydrochlorination with thiodiglycolyl dichloride and isophthaloyl dichloride to give respectively 6, 8 and 12,13. The diamine 3 and its N,N'-dibenzyl derivative 4 with pyridine-2,6-dicarbonyl dichloride give 7 and 5, respectively. The extraction and transport behaviour of these receptors have been determined towards alkali (Li⁺, Na⁺, K⁺),alkaline earth (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), Tl⁺, Ag⁺ and Pb²⁺ picrates.The participation of various ligating sites in binding have been evaluated through ¹³ NMR studies. The acyclic receptors 3, 4 and 11 show higher Ag⁺ selectivity than the cyclic analogs 6 and 12. In the case of acyclic receptor 3 the organisation induced by the 1,3-phenylene spacer and 2-aminophenylthio units and its flexibility generates optimal binding and selectivity towards Ag⁺. However, in cyclicreceptors 3 and 12 though the three thioether unitsare better organised, the inward placement of the NH_amide units restricts the entry of Ag⁺ into the cavity and lowers both the order of binding and selectivity. The lack of binding ability in 7due to an intramolecular NH_amide–-N_py H-bond isrestored in the N-benzyl derivative 5.     

A Simple Method to Fabricate a Conductive Polymer Micropattern on an Organic Polymer Substrate

Summary: Under UV irradiation plus a photomask, a hydrophilic/hydrophobic hybrid polymer surface is created by sandwiching an ammonium persulfate solution between two polymer films. It is demonstrated that an effective conductive PANI micropattern can be fabricated on such a wettability patterned surface. For PET, a stable negative micropattern could be formed directly by the selective deposition of PANI onto the hydrophobic region. Alternatively, for PP or PI, direct deposition of PANI is non‐selective, however, the PANI layer remains preferentially on the hydrophilic region by peeling off the PANI layer on the hydrophobic region to form a positive micropattern.

Schematic illustration of the procedure used for the formation of a conducting polymer (PANI) micropattern on a wettability patterned polymer substrate.     

微接触印刷法直接制备图案化TiO2薄膜

A novel process to gain clear and high edge acuity micropatterns of TiO2 thin films by direct microcontact printing was presented in this paper. Using TiO2 sol as the “ink”, poly (dimethylsiloxane) elastomeric stamp was taken to transfer the TiO2 colloids to the substrate. The process is different from the traditional process using the SAMS to induce the deposition of TiO2. The new way increases the transferred efficiency of the micropatterned TiO2 thin films. The optical micrographs and SEM show that the micropatterned structures of TiO2 were microscale and uniform over a large area as well.     

A Large-Area Patterned TiO2/SnO2 Bilayer Type Photocatalyst Prepared by Gravure Printing

Anatase TiO₂ films (thickness = 50 nm) were formed in shape of stripes (width = 1.6 mm, interval = 0.4 mm) by gravure printing on commercially available SnO₂ coated soda-lime glass substrates (dimension = 300 × 300 mm). Its photocatalytic activity was examined for the gas-phase oxidation of CH₃CHO in comparison with a simple TiO₂ photocatalyst formed on a silica glass. The patterned TiO₂/SnO₂ bilayer type photocatalyst showed a high photocatalytic activity in an H₂O bearing atmosphere. On the other hand, neither the patterning nor stacking effect was observed for the same reaction under dry conditions. These results could be explained in terms of the reducing potential of the electrons in the conduction band of the SnO₂ layer.     

简单方法合成α-MnO2和β-MnO2单晶纳米棒

通过简单的水热方法分别在150 ℃和220 ℃选择控制合成了单晶α-MnO2和β-MnO2纳米棒. 并用扫描电镜(SEM)、透射电镜(TEM)、能谱元素分析(EDX)、粉末X射线衍射(XRD)对产物进行了表征. 结果表明, 在水热反应过程中, 温度在控制合成α-MnO2和β-MnO2纳米棒中起到重要作用