The determination of trace metals in estuarine and coastal waters using a voltammetric in situ profiling system

This work presents the optimisation, validation and field deployment of a voltammetric in situ profiling (VIP) system for the simultaneous determinations of dynamic Cd(II), Cu(II) and Pb(II) in estuarine and coastal waters. Systematic studies in NaNO3 (as a supporting electrolyte) and seawater, indicated that variations in ionic strength, pH and dissolved oxygen did not affect the response of the instrument, whereas an Arrhenius type temperature response was observed. The VIP instrument allows the determination of 2-3 samples h(-1), and has a detection limit (defined as 3sigma) in seawater for Cd(II): 23 pM, Cu(II): 1.13 nM, and Pb(II): 23 pM. The VIP system accurately measured the total dissolved concentrations of Cd(II), Cu(II) and Pb(II) in two certified reference materials; SLRS-3, a river water, and SLEW-2, an estuarine water. Field evaluation of the instrumentation and analytical methods was achieved through a series of surveys in the Plym Estuary (Devon, UK), from which environmental data are presented.     

Spatial distribution of radium in coastal marine waters of Tamil Nadu

An investigation on the distribution of radium activity levels in the entire south eastern coast of Tamil Nadu, India, from Chennai to Kanyakumari was carried out. Insitu preconcentration technique was adopted by passing 1,000?L of seawater through MnO₂ impregnated cartridge filters at all the locations. In the coastal waters, ²²⁶Ra and ²²⁸Ra concentration was observed to be in the range of 1 to 1.81 and 3.1 to 7.5?mBq/L, respectively with an average of 1.52 and 4.53?mBq/L. respectively, while the sediment samples showed ²²⁶Ra activity levels from 8.1 to 129.0?Bq/kg and ²²⁸Ra varied from 14.7 to 430.01?Bq/kg. The Kd values for ²²⁶Ra was observed to be from 5.3E03 to 3.5E05?L/kg and for ²²⁸Ra it was in the range of 2.3E03 to 5.9E04. It was observed that the concentration of ²²⁸Ra was more than ²²⁶Ra in all the locations. The spatial distribution of the activity with respect to location is discussed in the paper. The radioactive database obtained, represents reference values for coastal environment of Tamil Nadu.     

Miniature flow injection analyser for laboratory, shipboard and in situ monitoring of nitrate in estuarine and coastal waters

A miniature, submersible flow injection analyser, with solid-state spectrophotometric detection, for the in situ determination of nitrate is described. It utilises the standard laboratory chemistry of cadmium reduction followed by diazotisation. The detection limit was 2.8 μg l⁻¹ N and the linear range could be varied from 2.8 to 100 μg l⁻¹ N up to 100–2000 μg l⁻¹ N to suit local environmental conditions. The versatility of the instrument is demonstrated by results from laboratory, shipboard (North Sea IMPACT Cruise) and in situ (Tamar Estuary, UK) deployments. They show the excellent temporal and spatial resolution that can be achieved for studying dynamic processes in estuarine and coastal waters. The results acquired during the IMPACT Cruise map the transport of nitrate from the Humber Estuary into the North Sea and show that nitrate uptake was more pronounced in areas of shallow and clear waters (Dogger Bank) than in the coastal mixing zone with higher suspended solids. A key feature of the analyser is its portability and ease of deployment due to the small size and weight and low buoyancy. Accuracy was assessed by participation in an international intercomparison exercise and the results were within the assigned tolerance interval of the consensus mean (Z<2).     

Concentrations of 239,240Pu and 241Am of marine products in coastal waters of Ibaraki

More than 200 samples of marine products have been collected and analyzed for plutonium and almost 100 samples for americium around Hitachi, Tokai and Oarai in the pacific coast of Ibaraki prefecture. The data have shown that the concentration factor (CF) values for plutonium were 330 for bivalve, 770 for abalone (muscle) and 610 for brown algae. For americium, the CF was calculated as 2400 for bivalve, 1000 for abalone (muscle) and 420 for brown algae.     

A compact flow injection analysis system for surface mapping of phosphate in marine waters

The design, construction and validation of a compact, portable flow injection analysis (FIA) instrument for underway analysis of phosphate in marine waters is described. This portable system employs gas pressure for reagent propulsion and computer controlled miniature solenoid valves for precise injection of multiple reagents into a flowing stream of filtered sample. A multi-reflection flow cell with a solid state LED photometer is used to detect filterable reactive phosphate (0.2 mum) as phosphomolybdenum blue. All the components are computer controlled using software developed using the Labviewtrade mark graphical programming language. The system has the capacity for sample throughput of up to 380 phosphate analyses per hour, but in the mode described here was operated at 225 analyses per hour. Under these conditions, the system exhibited a detection limit of 0.15 muM, reproducibility of 1.95 % RSD (n=9) and a linear response (r(2)=0.9992) when calibrated in the field with standards in the range 0.81-3.23 muM. The system was evaluated for the mapping of phosphate concentrations in Port Phillip Bay, south eastern Australia, and during the course of a 150 km cruise, 542 analyses were performed automatically. In general, good agreement was observed between analyses obtained using the portable FIA system and those obtained from manual sampling and laboratory analysis.     

Compact and autonomous multiwavelength microanalyzer for in-line and in situ colorimetric determinations

Nowadays, the attainment of microsystems that integrate most of the stages involved in an analytical process has raised an enormous interest in several research fields. This approach provides experimental set-ups of increased robustness and reliability, which simplify their application to in-line and continuous biomedical and environmental monitoring. In this work, a novel, compact and autonomous microanalyzer aimed at multiwavelength colorimetric determinations is presented. It integrates the microfluidics (a three-dimensional mixer and a 25 mm length "Z-shape" optical flow-cell), a highly versatile multiwavelength optical detection system and the associated electronics for signal processing and drive, all in the same device. The flexibility provided by its design allows the microanalyzer to be operated either in single fixed mode to provide a dedicated photometer or in multiple wavelength mode to obtain discrete pseudospectra. To increase its reliability, automate its operation and allow it to work under unattended conditions, a multicommutation sub-system was developed and integrated with the experimental set-up. The device was initially evaluated in the absence of chemical reactions using four acidochromic dyes and later applied to determine some key environmental parameters such as phenol index, chromium(VI) and nitrite ions. Results were comparable with those obtained with commercial instrumentation and allowed to demonstrate the versatility of the proposed microanalyzer as an autonomous and portable device able to be applied to other analytical methodologies based on colorimetric determinations.     

Tributyltin levels in French Mediterranean coastal waters

Tributyltin (TBT) and its degradation products were measured in seawater samples in 1988 and 1989 at different locations of the French Mediterranean coast, including harbours, marinas and mariculture areas. Higher levels of TBT contamination were found in harbour (2–833 ng dm^?3) and marina waters (18–736 ng dm^?3) compared with mariculture areas (<2–111 ng dm^?3). Geographical distribution of TBT degradation products showed that a TBT hot spot finally results in a diffuse contamination of dibutyltin (DBT) and monobutyltin (MBT), even far distant from input areas.     

Environmental monitoring and in situ gamma spectrometry

In situ gamma ray spectrometry is widely used for monitoring of natural as well as man-made radionuclides and corresponding gamma fields in the environment or working places. It finds effective application in the operational and accidental monitoring of nuclear facilities and their vicinity, spent fuel storages and waste depositories, radioactive contamination measurements and mapping, environmental, radiohygienic and radiation safety studies, geological prospecting and mapping, etc. Progressive spectrometric methods based on scintillation and semiconductor spectrometry and spectral deconvolution are discussed, including experimental arrangement as well as detection system responses/response matrixes simulation using stochastic (Monte Carlo) models. Methods for ground-level and airborne measurements are presented.     

A compact portable flow analysis system for the rapid determination of total phosphorus in estuarine and marine waters

The development and evaluation of a portable flow analysis system for the in situ determination of total phosphorus is described. The system has been designed with rapid underway monitoring in mind. The system employs an ultra-violet photo-reactor and thermal heating for peroxodisulfate digestion of total phosphorus to orthophosphate, followed by spectrophotometric detection with a multi-reflective flow cell and low-power light emitting diode using the molybdenum blue method. Reagents are stored under gas pressure and delivered using software controlled miniature solenoid valves. The fully automated system has a throughput of 115 measurements per hour, a detection limit of 1 μg P L⁻¹, and gives a linear response over the calibration range of 0-200 μg P L⁻¹ (r² = 0.9998), with a precision of 4.6% RSD at 100 μg P L⁻¹ (n = 10). Field validation of the instrument and method was performed in Port Philip and Western Port Bays in Victoria, SE Australia, where 2499 analyses were performed over a 25 h period, over a cruise path of 285 km. Good agreement was observed between determinations of samples taken manually and analysed in the laboratory and those measured in situ with the flow analysis system.     

Development of an FIA system with amperometric detection for determination of bentazone in estuarine waters

On the basis of its electrochemical behaviour a new flow-injection analysis (FIA) method with amperometric detection has been developed for quantification of the herbicide bentazone (BTZ) in estuarine waters. Standard solutions and samples (200 microL) were injected into a water carrier stream and both pH and ionic strength were automatically adjusted inside the manifold. Optimization of critical FIA conditions indicated that the best analytical results were obtained at an oxidation potential of 1.10 V, pH 4.5, and an overall flow-rate of 2.4 mL min(-1). Analysis of real samples was performed by means of calibration curves over the concentration range 2.5x10(-6) to 5.0x10(-5) mol L(-1), and results were compared with those obtained by use of an independent method (HPLC). The accuracy of the amperometric determinations was ascertained; errors relative to the comparison method were below 4% and sampling rates were approximately 100 samples h(-1). The repeatability of the proposed method was calculated by assessing the relative standard deviation (%) of ten consecutive determinations of one sample; the value obtained was 2.1%.     

Using sequential injection analysis for fast determination of phosphate in coastal waters

A sequential injection analysis system (SIA) is described which is suited for the fast determination of filterable molybdate reactive phosphate (FRP, 0.2 μm) in coastal waters. It processes up to 270 samples per hour with a detection limit (3σ) of 0.05 μM and is used for surface mapping of phosphate in areas with steep concentration gradients like the Wadden Sea. The determination is based on the reaction of phosphate with acidic molybdate to phosphomolybdate, which builds non-fluorescent ion pairs with rhodamine 6G. The remaining rhodamine fluorescence is detected at 550 nm with an excitation at 470 nm. Syringe pump, valve and detector were controlled by a self made python programme, which was optimised for high speed SIA measurements in monitoring applications.     

Speciation of organotin compounds in waters and marine sediments using purge-and-trap capillary gas chromatography with atomic emission detection

A procedure for the simultaneous determination of six organotin compounds, including methyl-, butyl- and phenyltins, in waters and marine sediments is developed. The analytes were leached from the solid samples into an acetic acid:methanol mixture by using an ultrasonic probe. The organotins were derivatized with sodium tetraethylborate (NaBEt₄) in the aqueous phase, stripped by a flow of helium, pre-concentrated in a trap and thermally desorbed. This was followed by capillary gas chromatography with microwave-induced plasma atomic emission spectrometry as the detection system (GC-AED). Each chromatographic run took 22 min, including the purge time. Calibration curves were obtained by plotting peak area versus concentration and the correlation coefficients for linear calibration were at least 0.9991. Detection limits ranged from 11 to 50 ng Sn l⁻¹ for tributyltin and tetramethyltin, respectively. The seawater samples analyzed contained variable concentrations of mono-, di- and tributyl- and monophenyltin, ranging from 0.05 to 0.48 μg Sn l⁻¹, depending on the compound. Some of the sediments analyzed contained concentrations of dibutyl- and tributyltin of between 6.0 and 13.0 ng Sn g⁻¹. Analysis of the certified reference material PACS-2, as well as of spiked water and sediment samples showed the accuracy of the method. The proposed method is selective and reproducible, and is considered suitable for monitoring organotin compounds in water and sediment samples.     

Wearable electrochemical sensors for in situ analysis in marine environments

The development of wearable screen-printed electrochemical sensors on underwater garments comprised of the synthetic rubber neoprene is reported. These wearable sensors are able to determine the presence of environmental pollutants and security threats in marine environments. Owing to its unique elastic and superhydrophobic morphology, neoprene is an attractive substrate for thick-film electrochemical sensors for aquatic environments and offers high-resolution printing with no apparent defects. The neoprene-based sensor was evaluated for the voltammetric detection of trace heavy metal contaminants and nitroaromatic explosives in seawater samples. We also describe the first example of enzyme (tyrosinase) immobilization on a wearable substrate towards the amperometric biosensing of phenolic contaminants in seawater. Furthermore, the integration of a miniaturized potentiostat directly on the underwater garment is demonstrated. The wearable sensor-potentiostat microsystem provides a visual indication and alert if the levels of harmful contaminants have exceeded a pre-defined threshold. The concept discussed here is well-suited for integration into dry- and wetsuits worn by divers and recreational surfers/swimmers, thereby providing them with the ability to continuously assess their surroundings for environmental contaminants and security hazards.     

A hydrogel readout for autonomous detection of ions in microchannels

Readouts that work autonomously on colorimetric principles were fabricated inside a microchannel by immobilizing dyes in a hydrogel matrix. Two pH-sensitive dyes (congo red and phenolphthalein) were studied. The response time of the readout varied between 20 s for phenolphthalein and 45 s for congo red dyes. The robustness of the dyed gels was tested at different flow rates (0.1, 0.25 and 0.5 mL min(-1)). Combinatorial readouts consisting of gels with the different dyes were fabricated and tested. Based on the limits of human perception, the fabrication methodology and the principles of functioning; general design rules for fabricating a readout device are discussed. The simple and low cost fabrication technique combined with autonomous functioning make the readout appropriate for portable microfluidic systems.     

The discovery of hidden arsenic species in coastal waters

The analysis of ultraviolet (UV)-irradiated and untreated seawater samples has shown that the dissolved arsenic content of marine waters cannot be completely determined by hydride generation–atomic absorption spectrophotometry without sample pretreatment. Irradiation of water samples obtained during a survey of arsenic species in coastal waters during the summer of 1988 gave large increases in the measured speciation. Average increases in the measured speciation. Average increases in total arsenic, monomethylarsenic and dimethylarsenic were 0.29 μg As dm^?3 (25%), 0.03 μg As dm^?3 (47%) and 0.12 μg As dm^?3 (79%), respectively. Overall, an average 25% increase in the concentration of dissolved arsenic was observed following irradiation. This additional arsenic may be derived from compounds related to algal arsenosugars or to their breakdown products. These do not readily yield volatile hydrides when treated with borohydride and are not therefore detected by the normal hydride generation technique. This has important repercussions as for many years this procedure, and other analytical procedures which are equally unlikely to respond to such compounds, have been accepted as giving a true representation of the dissolved arsenic speciation in estuarine and coastal waters. A gross underestimate may therefore have been made of biological involvement in arsenic cycling in the aquatic environment.     

One-PCR-tube approach for in situ DNA isolation and detection

Traditional real-time polymerase chain reaction (PCR) requires a purified DNA sample for PCR amplification and detection. This requires PCR tests be conducted in clean laboratories, and limits its applications for field tests. This work developed a method that can carry out DNA purification, amplification and detection in a single PCR tube. The polypropylene PCR tube was first treated with chromic acid and peptide nucleic acids (PNA) as DNA-capturer were immobilized on the internal surface of the tube. Cauliflower mosaic virus 35S (CaMV-35S) promoter in the crude extract was hybridized with the PNA on the tube surface, and the inhibitors, interfering agents and irrelevant DNA in the crude extract were effectively removed by rinsing with buffer solutions. The tube that has captured the target DNA can be used for the following real-time PCR (RT-PCR). By using this approach, the detection of less than 2500 copies of 35S plasmids in a complex sample could be completed within 3 hours. Chocolate samples were tested for real sample analysis, and 35S plasmids in genetically modified chocolate samples have been successfully identified with this method in situ. The novel One-PCR-tube method is competitive for commercial kits with the same time and simpler operation procedure. This method may be widely used for identifying food that contains modified DNA and specific pathogens in the field.     

Biological methods for marine toxin detection

The presence of marine toxins in seafood poses a health risk to human consumers which has prompted the regulation of the maximum content of marine toxins in seafood in the legislations of many countries. Most marine toxin groups are detected by animal bioassays worldwide. Although this method has well known ethical and technical drawbacks, it is the official detection method for all regulated phycotoxins except domoic acid. Much effort by the scientific and regulatory communities has been focused on the development of alternative techniques that enable the substitution or reduction of bioassays; some of these have recently been included in the official detection method list. During the last two decades several biological methods including use of biosensors have been adapted for detection of marine toxins. The main advances in marine toxin detection using this kind of technique are reviewed. Biological methods offer interesting possibilities for reduction of the number of biosassays and a very promising future of new developments.     

Intercomparison of techniques for estimation of sedimentation rate in the Sabah and Sarawak coastal waters

A total of eight sediment cores with 50 cm length were taken in the Sabah and Sarawak coastal waters using a gravity corer in 2004 to estimate sedimentation rates using four mathematical models of CIC, Shukla-CIC, CRS and ADE. The average of sedimentation rate ranged from 0.24 to 0.48 cm year^?1, which is calculated based on the vertical profile of ²¹⁰Pb_ex in sediment core. The finding also showed that the sedimentation rates derived from four models were generally shown in good agreement with similar or comparable value at some stations. However, based on statistical analysis of paired sample t-test indicated that CIC model was the most accurate, reliable and suitable technique to determine the sedimentation rate in the coastal area.     

Flow injection analysis system based on amperometric thin-film transducers for free chlorine detection in swimming pool waters

This work reports on the performance of a user-friendly flow injection analysis (FIA) system for the monitoring of free chlorine. A methacrylate flow cell integrating a gold thin-film microelectrode, together with an on-chip gold counter electrode, both fabricated by microfabrication technology, provided robustness, low output impedance, rapid response and low cost to the proposed flow system. An external Ag/AgCl reference electrode placed downstream the chip completes the electrochemical cell. Amperometric detection of chlorine was carried out at a set potential of +350 mV, without oxygen interference. The proposed flow system responded linearly to chlorine concentrations in a range from 0.2 to 5 mg l⁻¹, with a sensitivity of 0.23 μA l mg⁻¹, the estimated limit of detection being 0.02 mg l⁻¹. In addition, the system response was kept stable for at least 10 days (±3σ criterion), by keeping the flow system in an inert atmosphere when not in use. Fifteen samples of swimming pool waters were analyzed and no matrix effects were detected. Also, results were in good agreement with those obtained by a standard method. The excellent analytical performance of the system together with its good working stability would also enable its application for the detection of chlorine in other matrices such as tap water or chlorine stock solutions.     

Characterisation of dissolved combined amino acids in marine waters

Dissolved combined amino acids (DCAA) are important constituents of the dissolved organic nitrogen (DON) pool in marine environments, although little is known about their sources, dynamics and sinks. The DCAA pool consists of various compounds including proteins and peptides, proteins linked to sugars and amino acids adsorbed to humic and fulvic acids, clays and other materials. The proportions of each of these components and the extent to which they are used by microplankton living within the photic zone are not known. An investigation was carried out, using (15)N isotope dilution techniques, to determine the concentration and composition of dissolved amino acid pools in the marine environment. A near-shore seawater sample was collected and split into fractions to determine the concentrations of dissolved free amino acids (DFAA), DCAA and a <3 kDa dissolved peptide fraction (DPEP; obtained by ultrafiltration). DCAA and DPEP fractions were hydrolysed to yield free amino acids and all samples were analysed by gas chromatography/mass spectrometry (GC/MS) as isobutyloxycarbonyl/tert-butyldimethylsilyl derivatives. The DFAA was the smallest fraction representing approximately 1% of total dissolved amino acids. The majority of DCAA was contained in the low molecular weight DPEP fraction (90%) and was probably as a result of release from phytoplankton and degradation by heterotrophic bacteria.