Fabrication of macroporous SiC from templated preceramic polymers

Macroporous SiC with a highly ordered pore array was prepared for the first time using low molecular weight SiC preceramic polymers such as polymethylsilane or polycarbosilane by utilizing sacrificial colloidal silica crystalline arrays, as a template which were subsequently etched off after pyrolysis in an argon atmosphere.     

A novel ordered cubic mesoporous silica templated with tri-head group quaternary ammonium surfactant

An ordered mesoporous silica with novel cubic structure (space group Fd3m) has been synthesized by using tri-head group quaternary ammonium surfactants [CmH2m + 1N+(CH3)2CH2CH2N+(CH3)2CH2CH2CH2N+(-)(CH3)(3).3Br-] (Cm-2-3-1, m = 14, 16, 18) as the structure-directing agents under basic conditions at low temperature.     

Three-dimensionally ordered mesoporous Pd networks templated by a silica super crystal and their application in formic acid electrooxidation

Three-dimensionally ordered mesoporous Pd networks fabricated by a simple reduction method in solution using a face centered cubic silica super crystal as template exhibit high electroactivity in formic acid oxidation.     

Syntheses of ordered mesoporous silica by new hybrid template

Ordered mesoporous silica with macroscopic shape has been prepared with a hybrid template of gel and poly(ethylene oxide)₁₀₆–poly(propylene oxide)₇₀–poly(ethylene oxide)₁₀₆ (pluronic F127) surfactant, where both water-soluble agar gel and pluronic F127 significantly affect the mesoporous structure and morphology of silica. The thermal analysis revealed the noticeable interaction between agar and F127, which contributes to the formation of homogenous hybrid template. In the hybrid template, agar gel contributed to the maintenance of morphology structure, while F127 was responsible for the formation of ordered porous structure in silica solids.     

Mesoporous single-crystal Co3O4 templated by cage-containing mesoporous silica

Mesoporous single-crystal Co(3)O(4) was obtained using cage-containing mesoporous silicas, FDU-12 and SBA-16, as templates and characterised by XRD, HRTEM and nitrogen adsorption-desorption while SQUID magnetometry was used to probe the magnetic character.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Preparation of amino-functionalized mesoporous silica thin films with highly ordered large pore structures

Highly ordered amino-functionalized mesoporous silica thin films have been directly synthesized by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of triblock copolymer Pluronic P123 surfactant species under acidic conditions by sol-gel dip-coating. The effect of the sol aging on thin films organization is systematically studied, and the optimal sol aging time is obtained. The amino-functionalized mesoporous silica thin films exhibit a long-range ordering of 2D hexagonal (p6mm) mesostructure with a large pore size of 8.3 nm, a large Brunauer–Emmett–Teller (BET) specific surface area of 680 m² g⁻¹ and a large pore volume of 1.06 cm³ g⁻¹ following surfactant extraction as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM), and physical adsorption techniques. Based on BET surface area and weight loss, the surface coverage of amino-groups for the amino-functionalized mesoporous silica thin films is calculated to be 3.2 amino-groups per nm². Moreover, the functionalized thin films display improved properties for immobilization of cytochrome c in comparison with pure-silica mesoporous thin films.     

Enhanced release of itraconazole from ordered mesoporous SBA-15 silica materials

This in vitro study reports on the enhanced release of the hydrophobic drug itraconazole from the ordered mesoporous SBA-15 silica material and on the existence of a critical mesopore diameter for enhancing release.     

Three-dimensional low symmetry mesoporous silica structures templated from tetra-headgroup rigid bolaform quaternary ammonium surfactant

Two kinds of highly ordered mesoporous silica materials (FDU-11, FDU-13) with novel three-dimensional (3-D) tetragonal and orthorhombic structures were synthesized by using tetra-headgroup rigid bolaform quaternary ammonium surfactant [(CH(3))(3)NCH(2)CH(2)CH(2)N(CH(3))(2)CH(2)(CH(2))(11)OC(6)H(4)C(6)H(4)O(CH(2))(11)CH(2)N(CH(3))(2)CH(2)CH(2)CH(2)N(CH(3))(3).4Br] (C(3-12-12)(-)(3)) as a template under alkaline conditions. High-resolution transmission electron microscopy (HRTEM), small-angle X-ray scattering (SAXS), and X-ray diffraction (XRD) show that mesoporous silica FDU-11 has primitive tetragonal P4/mmm structure with cell parameters a = b = 8.46 nm, c = 5.22 nm, and c/a ratio = 0.617. N(2) sorption isotherms show that calcined FDU-11 has a high BET surface area of approximately 1490 m(2)/g, a uniform pore size of approximately 2.72 nm, and a pore volume of approximately 1.88 cm(3)/g. Mesoporous silica FDU-13 has primitive orthorhombic Pmmm structure. The cell parameters are a = 9.81, b = 5.67, and c = 3.66 nm. N(2) sorption isotherms show that calcined FDU-13 has a high BET surface area of 1210 m(2)/g, a uniform mesopore size of approximately 1.76 nm, and a large pore volume of approximately 1.83 cm(3)/g. Such low symmetries for 3-D mesostructures (tetragonal and orthorhombic system) have not been observed before even in amphiphilic liquid crystals, which maybe resulted from an oblate aggregation of the bolaform surfactant and its strong electrostatic interaction with inorganic precursor. A probable mechanism has been proposed for the formation of such a 3-D low symmetrical mesostructure. These results will further extend the synthesis of mesoporous materials and may open up new opportunities for their new applications in catalysis, separation, and nanoscience.     

Temperature-programmed microwave-assisted synthesis of SBA-15 ordered mesoporous silica

The currently available microwave technology permits the development and implementation of a temperature-programmed microwave-assisted synthesis (TPMS) of ordered mesoporous silicas (OMSs). Unlike in previously reported syntheses of OMSs, in which only the final hydrothermal treatment was carried out under microwave irradiation, this work takes advantage of the existing capabilities of modern microwave systems to program the temperature and time for the entire synthesis of these materials. To demonstrate the flexibility of the proposed microwave-assisted synthesis, besides programming two consecutive steps involving initial stirring of the gel at a lower temperature and static hydrothermal treatment at a higher temperature, we explored the possibility of temperature programming of the latter step. A major advantage of microwave technology is the feasibility of temperature and time programming, which has been demonstrated by the synthesis of one of the most popular OMSs, SBA-15, over an unprecedented range of temperatures from 40 to 200 degrees C. Since the synthesis of OMSs has not yet been explored and reported at temperatures exceeding 150 degrees C, this work is focused on the SBA-15 samples prepared at higher temperatures (such as 160, 180, and even 200 degrees C). These SBA-15 samples show better thermal stability than those synthesized at commonly used temperatures either under conventional or microwave conditions. Moreover, a partial decomposition of the template during high-temperature microwave-assisted syntheses does not compromise the formation of well-ordered SBA-15 materials. This study shows that the simplicity and capability of temperature and time programming in TPMS allows one not only to tune the adsorption and structural properties of OMSs but also to easily screen a wide range of conditions in order to optimize and scale-up their preparation as well as to significantly reduce the time of synthesis from days to hours.     

Preparation of mesostructured siloxane-organic hybrid films with ordered macropores by templated self-assembly

Novel hierarchically ordered siloxane-based hybrid films with well-defined macropores and mesostructured pore walls have been prepared by the self-assembly process using oligomeric siloxane precursors bearing alkyl chains (CnH2n+1Si(OSi(OMe)3)3) in the presence of polystyrene opal films as a template. Either a two-dimensional (2D) hexagonal structure or a lamellar structure was formed depending on the alkyl chain length of the precursors (n = 10 and 16, respectively). In both of the films, the mesostructures were oriented along the spherical surface of the template and were retained after removal of the template. Calcination of the 2D hexagonal hybrid produced ordered porous silica with both macro- and microporosities. The lamellar hybrid film exhibited a unique property of accommodating alkyl alcohols with an expansion of the interlayer spacings. These results provide a new concept for designing hierarchical hybrid materials that are potentially applicable as adsorbents, catalysts, sensors, and photonic crystals.     

Supercritical carbon dioxide processing of fluorinated surfactant templated mesoporous silica thin films

The effect of processing mesoporous silica thin films with supercritical CO2 immediately after casting is investigated, with a goal of using the penetration of CO2 molecules in the tails of fluorinated surfactant templates to tailor the final pore size. Well-ordered films with two-dimensional hexagonal close-packed pore structure are synthesized using a cationic fluorinated surfactant, 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl)pyridinium chloride, as a templating agent. Hexagonal mesopore structures are obtained for both unprocessed films and after processing the cast films in CO2 at constant pressure (69-172 bar) and temperature (25-45 degrees C) for 72 h, followed by traditional heat treatment steps. X-ray diffraction and transmission electron microscopy analysis reveal significant increases in pore size for all CO2-treated thin films (final pore diameter up to 4.22 +/- 0.14 nm) relative to the unprocessed sample (final pore diameter of 2.21 +/- 0.20 nm) before surfactant extraction. Similar pore sizes are obtained with liquid and supercritical fluid treatments over the range of conditions tested. These results demonstrate that combining the tunable solvent strength of compressed and supercritical CO2 with the "CO2-philic" nature of fluorinated tails allows one to use CO2 processing to control the pore size in ordered mesoporous silica films.     

Fabrication and photoluminescent properties of ZnO/mesoporous silica composites templated by a chelating surfactant

A novel anionic surfactant-templated synthesis of ZnO/mesoporous silica nanocomposites has been carried out by using N-hexadecylethylenediamine triacetate (HED3A), a triprotic surfactant, as the structure-directing agent. The chelating template can capture zinc ions in solution and then direct the mesophase formation, enabling an amount of zinc oxide to be embedded in the porous silica matrix during calcination. With variation of the molar ratio of Zn(2+) to HED3A in the template, a series of composites with different doping amounts were obtained after the removal of organic components. The variation of the zinc ion concentration in the initial template solution induces an evolution of the silica mesophase, presumably due to the change in electronegativity of the HED3A headgroup caused by the chelating effect. Spectroscopic studies show a strong host-guest interaction between the silica pore walls and ultrafine ZnO nanoparticles. The photoluminescence properties of the resulting composites exhibit a size-dependent light emission and quantum-confinement effect of ZnO, accompanied by an infrequent violet emission originating from the ZnO-SiO(2) interface.     

双模板法制备介孔二氧化硅纳米蚕茧

用十八烷基三甲基溴化铵(STAB)作模板剂,左旋香茅醇(CN)为结构助剂,利用溶胶-凝胶法,在CN/STAB摩尔比1∶1条件下制备了介孔二氧化硅纳米蚕茧;采用扫描电镜和透射电镜分析了产物的结构,并对其进行了氮气吸附-脱附测试.结果表明,所制备的介孔二氧化硅纳米蚕茧的孔道与蚕茧表面平行;搅拌速度对介孔二氧化硅纳米蚕茧的长度有较大的影响,随着搅拌速度的增加,其长度减小.     

Titanium-rich highly ordered mesoporous silica synthesized by using a mixed surfactant system

A new titanium-rich highly ordered 2-D hexagonal mesoporous titanium silicate has been synthesized using a mixture of cationic (cetyltrimethylammonium bromide, CTAB) and non-ionic (Brij-35, C₁₂H₂₅-(OC₂H₄)₂₃-OH, a polyether and aliphatic hydrocarbon chain surfactant) mixed surfactant system as the supramolecular structure directing agent (SDA) in the presence of tartaric acid (TA) as a mineralizer of Ti(IV). XRD, N₂ adsorption and TEM data suggested the presence of mesophase with hexagonal pore arrangements and the UV-visible, FT IR and XPS studies suggested the incorporation of mostly tetrahedral titanium (IV) species in the highly ordered silica network. This mesoporous titanium silicate material showed excellent catalytic activity and selectivity in the epoxidation of styrene using dilute aqueous H₂O₂ as oxidant.     

Gas diffusion and microstructural properties of ordered mesoporous silica fibers

Pore and surface diffusion of carbon dioxide (CO(2)) and ethylene (C(2)H(4)) in the nanopores of ordered mesoporous silica fibers about 200 microm in length was measured by the transient gravimetric method. The experimentally determined pore diffusivity data, coupled with the porosity, pore size, and fiber length, are used to obtain the actual length of the nanopores in silica fibers. These measurements reveal a structure of the ordered nanopores whirling helically around the fiber axis with a spiral diameter of about 15 microm and a pitch value of 1.6 microm. At room temperature the surface diffusion contributes about 10% to the total diffusional flux for these two gases in the nanopores of the ordered mesoporous silica fibers. The surface diffusion coefficients for the ordered mesoporous silica fibers are about 1 order of magnitude larger than the non-ordered mesoporous alumina or silica with similar pore size.     

One-pot aerosol synthesis of ordered hierarchical mesoporous core-shell silica nanoparticles

A mixed surfactant approach has been successfully employed in an aerosol-based synthesis of spherical silica particles exhibiting a new core-shell structure where the shell and the core exhibit different ordered mesoporosity and pore sizes.