Extraction-spectrophotometric determination of chromium with Nitrotetrazolium Blue

The interaction of Cr(VI) and Nitrotetrazolium Blue has been examined. A 12 NTB (CrO₃Cl)₂ ion-associate is formed and is extractable into 1,2-dichloroethane. The optimum conditions have been established. The molar absorptivity at 260 nm was (8.2 ± 0.06) × 10⁴L mol^–1cm^–1. Beer's law was obeyed in the range 0.01–0.4 g ml^–1 Cr(VI). A sensitive and selective method for determination of micro-quantities of Cr(VI) in soils and steels is suggested.     

4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione (THBIT), a new reagent for the spectrophotometric determination of palladium

Summary 4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione, THBIT, is proposed as a new reagent for the spectrophotometric determination of Pd(II). Pd(II) forms 11, 12 and 14 complexes with THBIT. The system conforms to Beer's law up to 5g/ml palladium concentration in aqueous medium (molar absorptivity, 1.99×10⁴ l· mole^–1·cm^–1 at 338 nm). The most serious interference is from Hg(II), Os(VIII), Ru(IV), Cr(VI), V(V) and S₂O₃ ^2–. The method has been used successfully for the determination of palladium in catalysts and synthetic samples.     

3-Hydroxy-2-(2-thienyl)-4H-chromen-4-one as a new reagent for the extraction and trace determination of molybdenum(VI)

A simple, sensitive and selective method for the extraction and trace determination of molybdenum(VI) has been developed; it is based on its reaction with 3-hydroxy-2-(2-thienyl)-4H-chromen-4-one (HTC) in sulphuric acid medium. The 1:2 Mo (VI)-HTC yellow complex is quantitatively extractable into chloroform (_max 420 nm) and is stable for more than 4 h. The procedure eliminates the interference of a large number of metal ions and complexing agents. Beer's law is obeyed in the range of 0–2.85 g Mo/mL with a molar absorptivity, Sandell's sensitivity and standard deviation of 5.28×10⁴ L mol^–1 cm^–1, 0.0018 g Mo/cm² and ±0.0054, respectively. The method has successfully been used for the spectrophotometric determination of molybdenum in steel samples.     

The potentiometric determination of stability constants of macrocyclic ethers using linear regression techniques

Summary The stability constants of various stoichiometries of NaCl complexes of the macrocyclic ethers of 15-crown-5, benzo-15-crown-5, 18-crown-6 and benzo-18-crown-6 were measured by maintaining identical initial ion-ligand concentrations [A ₀ ⁺ ]=[L_o] and using the expression of the stability constant _i of a complex formation, 1/_i[L_o]^n+m–1=(1–nP)ⁿ(1–mP)^m/P where P=P_AL/[1+P_AL(m–1)]. The potentiometric measurements were carried out in water with a glass membrane electrode in a computer-ion meter system.Submitted to IUPAC, International Symposium on Macrocyclic Ligands for the Design of New Materials, 1992, Surrey, UK     

Solvent extraction and spectrophotometric including graphite furnace atomic absorption determination of molybdenum in the environment

A selective and sensitive method for the extraction and microgram determination of molybdenum (VI) with hydroxamic acid as yellow molybdenum-hydroxamate complex from acidic medium is described. The molybdenum-PCPPSAHA complex has _max 388 nm, molar absorptivity 5.0 × 10³l mol^–1 cm^–1. The system obeys Beer's law in the range of 1–28 g/ml of molybdenum(VI). Sandell's sensitivity is 0.0192 g cm² and stoichiometry of the complex is 12, molybdenum: PCPPSAHA while mixed complex molybdenum-PCPPSAHA-morin has _max 400 nm and molar absorptivity 5.9 × 10³lmo1^–1 cm^–1 and stoichiometry of the complex is 121.The molybdenum is determined by graphite furnace atomic absorption spectrophotometry after directly pipetted the extract into the furnace which increases the sensitivity 20 fold.     

Spectrophotometric determination of Fe(III) with tiron in the presence of cationic surfactant and its application for the determination of iron in Al-alloys and Cu-based alloys

A sensitive Spectrophotometric method for the determination of iron with tiron and a cationic surfactant, cetylpyridinium chloride, at pH 5.6 is reported. The complex is extracted into a chloroform-propan-2-ol (41) mixture and shows maximum absorbance at 520 nm. Beer's law is obeyed in the range 1–14 g/ml with an average molar absorptivity of 15800 l mol^–1 cm^–1. The molar ratio as determined by Job's method for Fe:tiron:CPC is 143. Interferences by various ions are examined. Zr, Ti and Mo interfere heavily. The method is applied for the determination of iron in Al-based and Cu-based alloys, using appropriate masking agents.     

High-Performance Liquid Chromatographic Determination of Quinolizidine Alkaloids in Radix Sophora Flavescens Using Tris(2,2′-Bipyridyl)Ruthenium(II) Electrochemiluminescence

Electrogenerated chemiluminescences (ECLs) of quinolizidine alkaloids including matrine (MT), sophocarpine (SC), and sophoridine (SRI) are studied. The light emission is caused by an electro-oxidation reaction between Ru(bpy)₃²⁺ and the tertiary amino group on the alkaloid compounds. A thin-layer flow cell equipped with a glassy carbon disk electrode (22.1mm²) at the potential of ⁺1.30V (vs. Ag/AgCl) was applied for ECL observation. MT, SC and SRI were separated and quantitatively determined within 25min by an ODS-80 Ts reversed-phase column with a mobile phase containing 80mmolL^–1 NaH₂PO₄–K₂HPO₄ buffer+acetonitrile (7:3)+40mmolL^–1 sodium dodecyl sulfate (pH 6.5). The determination limit at an S/N of 3 ranged from 3×10^–9gmL^–1 for MT, 6×10^–9gmL^–1 for SC and 1×10^–9gmL^–1 for SRI. The recoveries are from 92 to 108%, with repeatability ranging from 1.3 to 4.5% (relative standard deviation). The method was successfully applied to the determination of quinolizidine alkaloids in Sophora flavescens samples.     

Complexation,solubilities and thermodynamic functions for cerium(III) fluoride-water system

The solubility, solubility product and the thermodynamic functions for the CeF₃–H₂O system have been measured using the radiometric, conductometric and potentiometric techniques. The radiometric values for the solubility and solubility product, the lowest and more acceptable for reasons cited in previous papers, are 3.14·10^–5 M and 2.17·10^–17 respectively. The enthalpy change measured by the conductometric method is almost twice as that obtained by potentiometric method due to abnormal conductances registered at higher temperatures. The average values for H^o and G^o and S^o at 298 K are 53.0±17.4, 91.7±4.0 and –129.7±58.2 KJ·mol^–1 respectively. The positive values for H^o and G^o and the negative value for S^o are indicative of the low solubility of this salt in water. The stability constants for the mono- and difluoride complexes of Ce(III) have been determined potentiometrically using unsaturated solution mixtures of Ce(III) and F^–. These values for CeF⁺ and CeF ₂ ⁺ are 997±98 and (1.03±0.44)·10⁵, respectively. Studies on pH dependence of the solubility shows that the solubility reaches a minimum value at a pH of about 3.2.     

Spectrophotometric determination of 6-aminopenicillanic acid using bromophenol blue and bromothymol blue

Two simple, selective and sensitive spectrophotometric methods are described for the determination of 6-aminopenicillanic acid (6-APA). The methods are based on the reaction of 6-APA with either bromophenol blue (BPB) or bromothymol blue (BTB), to give orange-red and green species, respectively. The coloured products are quantified spectrophotometrically at 625 and 616 nm for BPB and BTB, respectively. The optimization of the different experimental conditions is described. No interferences from different -lactams and common degradation products were observed in the determination of 6-APA using BTB, while flucloxacillin, dicloxacillin, adrenaline, vitamin C, urea and common degradation products in any percentage interfere on using BPB only. The BTB method was better than the BPB method, because of its wider range of determination (0.4–20 g ml^–1 vs. 0.4–7.2 g ml^–1 on using BPB), higher molar absorptivity and Sandell sensitivity (3.27 × 10³l mol^–1 cm^–1 and 0.099 g cm^–2 vs. 2.82 × 10³lmol^–1 cm^–1 and 0.115 g cm^–2), greater stability (3 and 10 days on using BTB and BPB, respectively) and better selectivity. The results were compared with those given by the Official United States Pharmacopeial XXI method.     

Spectrophotometric and titrimetric determination of gallium in minerals and ores using semimethylthymol blue

The composition, overall stability constant and molar absorptivity of the chelate of gallium(III) ion with semimethylthymol blue, SMTB, were determined spectrophotometrically in acetate buffer (pH 4.5–5). A violet Ga(SMTB) chelate was formed with logarithmic overall stability constant of 18.0±0.1 (I=0.1) and molar absorptivity of 4.25×10⁴l mol^–1cm^–1 (_max 580 nm). SMTB is proposed as a new reagent for the spectrophotometric determination of micro-molar amounts of gallium(III). The colour development depends on time, temperature, pH and buffer species. The interference of different cations, anions and organic acids on gallium(III) determination was also investigated. Beer's law was obeyed for 3.5–31.3 gGa(III)/25ml (0.14–1.25 g ml^–1). SMTB was used for the spectrophotometric determination of gallium in different grade minerals and ores and the results were of acceptable error and relative standard deviation. Comparison between the two suggested methods and atomic absorption spectrometry for Ga(III) determination was carried out.     

Spectrophotometric determination of uranium with 5-(2′-carboxyphenyl)azo-8-quinolinol in the non-ionic micellar medium of Triton X-100

Triton X-100, a non-ionic surfactant, has been used to sensitize the reaction of 5-(2-carboxyphenyl)azo-8-quinolinol with uranium in aqueous medium at pH 5.2–6.1 to form a wine red coloured complex. The micellar sensitization results in two and a half-times enhanced molar absorptivity enabling the determination of uranium in rock samples at ppm level, stability of the complex enhanced from 4 hours to at least 72 hours. Extraction of the complex is avoided making the procedure simple, rapid and easy in operation. The molar absorptivity and Sandell's sensitivity of the complex are 1.50·10⁴l·mol^–1·cm^–1 and 15.9 ng·cm^–2, respectively, at _max=568 nm. Beer's law is obeyed over the range 0–3.3 g·ml^–1 of uranium. An amount as low as 0.19 g·ml^–1 of uranium could be determined satisfactorily within a relative standard deviation of ±1.3%. The limits of determination and practical quantitation are 0.29 and 1.80 ppm, respectively. The method was applied to the determination of uranium in soil, stream sediment and rock samples.     

Spectrophotometric determination of nitrogen dioxide in air

Summary A sensitive spectrophotometric method for the determination of trace amounts of nitrogen dioxide, after fixing it as nitrite in alkaline sodium arsenite solution, is described. The reaction is based on the diazo-coupling of p-nitroaniline with chromotrophic acid in acetate medium (pH 6±0.5). The azo dye formed has its absorption maximum at 515 nm, with a molar absorptivity of 3.7×10⁴ l mol^–1 cm^–1. Beer's law is obeyed over the range 0–20 g of nitrite. The relative standard deviation is 2.5% for ten determinations of 10 g of nitrite. The effect of interfering gases and ions on the determination is discussed. The method has been applied to the determination of residual nitrogen dioxide in a laboratory fume cupboard and the results are compared with those obtained by the widely used sulphanilamide — NEDA method. Down to 0.5 g of nitrite can be determined.     

Spectrophotometric determination of ammonia-nitrogen after preconcentration as indothymol on a glass-fiber filter in the presence of a cationic surfactant

Ammonia-nitrogen, in the range 0.06 to 2 g in 20 ml of water sample, is treated with hypochlorite and thymol to form an intensely blue anionic dye called indothymol. The indothymol is collected on a glass-fiber filter as the ion-pair with benzyldimethyltetradecylammonium ion. The indothymol collected on the filter is dissolved in a small volume of dimethylformamide (DMF) and the absorbance due to the indothymol is measured at 675 nm against the reagent blank. An unexpectedly high sensitivity was obtained because of the increased molar absorptivity of indothymol in DMF (3.2 × 10⁴ l mol^–1 cm^–1, _max = 675 nm), approximately 3 times larger than that in water (1.16 × 10⁴ l mol^–1 cm^–1, _max = 660 nm). The detection limit, defined as three times the standard deviation of the blank, is better than 1 g 1^–1 of ammonia-nitrogen with 5-fold preconcentration.     

Synthesis and properties of disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S2BINPH) and spectrophotometric determination of trace amounts of nickel with S2BINPH

Disulfonated (2-benzimidazolyl)(phenyl)methanone 5-nitro-2-pyridylhydrazone (S₂BINPH) has been synthesized and its reactivity with metal ions investigated. A sensitive and selective spectrophotometric method for the determination of nickel with this reagent has been developed. S₂BINPH reacts with nickel(II) to form a stable 12 (metal ligand) complex with an absorption maximum at 501 nm. The complex formation is quantitative in the pH range 7.2–8.5. Beer's law is obeyed over the range 60–700 ng ml^–1 of nickel and the apparent molar absorptivity of the complex is 8.86 × 10⁴ mol^–1 1 cm^–1 at 501 nm. The proposed method was applied to the determination of nickel in a standard iron- and -steel sample with satisfactory results. Furthermore, proton dissociation constants of S₂BINPH and the overall formation constant of its nickel complex were also determined spectrophotometrically.     

Superionic conductivity in (BEDT-TTF)AgXiY

We have synthesized the organic conductor (BEDT-TTF)Ag_XI_Y (X 1.8 and Y 2.9). This compound has, in addition to high electronic conductivity (_{300 k} 5–10 ^–1 · cm^–1), significant ionic conductivity connected with the motion of silver ions. The value of this ionic conductivity at room temperature is 10^{–3 –1} · cm^–1. The activation energy for diffusion of Ag ions is equal to 0.2 eV.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 247–249, March–April, 1989.     

Two-electron atomic wave functions which satisfy proportionality relations between one-and two-electron moments

Based on momentum- and position-space analyses of the moment operators for two-electron atoms, it is shown that there exists a family of two-electron wave functions which satisfy a proportionality relation, r/ ₁ ^v /r ₁₂ ^v =p/ ₁ ^v /p ₁₂ ^v =2^–v/2, between the one and two-electron moments in position and momentum spaces, where v is an arbitrary number for which the moments are well-defined.     

Crystal structure of the synthetic analog of radtkeite Hg<Subscript>3</Subscript>S<Subscript>2</Subscript>Cl<Subscript>1.00</Subscript>I<Subscript>1.00</Subscript>

The results of structural studies of the synthetic analog of the radtkeite mineral Hg₃S₂Cl_1.00I_1.00 are analyzed. The crystal structure of the compound has been refined; the unit cell parameters are a _m = 16.827(4) , b _m = 9.117(1) , c _m = 13.165(5) , = 130.17(2)°, V = 1543.3(8) ³, space group C2/m, Z = 8, R = 0.0527. A possible transition a ₀ = a _m; b ₀ = a _m + 2c _m; c ₀ = –b _m to the pseudo-orthorhombic F cell previously determined for radtkeite, where one of the angles ( ₀ ) is slightly different from 90° (89.55°), has been found. Each sulfur atom in the structure is bonded to three mercury atoms, forming SHg₃ umbrellas with distances 2.240(6) –2.474(8) and angles HgSHg 94.7(2)°–102.9(2)°. The SHg₃ fragments are linked through Hg vertices to form corrugated [Hg₁₂S₈] layers. The halogen atoms lie inside and between the [Hg₁₂S₈] layers; the distances are Hg-Cl and Hg-I 2.783(7) , 2.961(7) , and 3.083(4) –3.311(3) , respectively.Original Russian Text Copyright © 2004 by N. V. Pervukhina, S. V. Borisov, S. A. Magarill, D. Yu. Naumov, V. I. Vasiliev, and B. G. NenashevTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 755–758, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Substituent parameters for radical reactions Cerium(IV) — substituted toluenes — acrylonitrile system

Summary In the present study, a new approach for the determination of ', that is, radical substituent parameter, has been described. The technique is based on two equations, one reported byYamamoto andOtsu and the other byStreitwieser andPerrin. The system used for the determination of the radical substituent parameter (') was Ce(IV) — substituted toluenes — acrylonitrile system. To explain inhibition, it has been suggested that the reaction scheme involves initiation of polymerization by Ce(IV) and termination by primary radical of the substrate. The kinetic expression based on the reaction scheme formulated could explain the unusual observation of a negative intercept found in the plot of [M]/R _p versus 1/[M]. Whereas a plot of log /₀ against ⁺ did not give a straight line, a good linear plot with zero intercept was obtained when log /₀ was plotted against (⁺ + '). This proves the validity of ' values which have been determinded.     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

Determination of boron, carbon, nitrogen and oxygen in nickel by charged particle activation analysis

Summary The determination of boron, carbon, nitrogen and oxygen in nickel by charged particle activation using the reactions ¹⁰B(d, n)¹¹C, ¹²C(d, n)¹³N, ¹⁴N(p, )¹¹C and ¹⁶O(³He, p)¹⁸F is studied. The interference of ¹¹B(p, n)¹¹C with the ¹⁴N(p, )¹¹C reaction is taken into account. ¹¹C, ¹³N and ¹⁸F are separated by oxygen combustion followed by trapping of ¹¹CO₂ in NaOH and by steam distillation of ¹³NH₃ and of H₂Si¹⁸F₆, respectively. The results obtained were 0.129±0.035 g g^–1 for boron, 86.4±8.3 g g^–1 for carbon, 1.077±0.037 g g^–1 for nitrogen and 8.91±1.00 g g^–1 for oxygen. The results for nitrogen and oxygen agreed satisfactorily with those of other analytical methods.Grateful acknowledgement is made to Prof. J. Hoste for his interest shown in this work, to J. Pauwels (B.C.M.N., Geel) for providing the samples, to B. F. Schmitt (Bundesanstalt für Materialprüfung, Berlin) for helpful information concerning the radiochemical separation of ¹¹C and to the NFWO and the IIKW for financial support.