Thousand fold concentration of an alkaloid in capillary zone electrophoresis by micelle to solvent stacking

In this paper, the co-solvent of methanol-water was used to facilitate the sodium dodecyl sulfate (SDS) micelles collapse, thereby inducing the on-line sample focusing technique of micelle to solvent stacking (MSS). To demonstrate this stacking method, the mechanism of micelles collapse in co-solvent was discussed. The details of the required conditions were investigated and the optimized conditions were: running buffer, 20mM H(3)BO(3) and 20mM NaH(2)PO(4) solution (pH 4.0); micellar sample matrix, 20mM SDS, 20mM H(3)BO(3) and 20mM NaH(2)PO(4) solution (pH 4.0); co-solvent buffer, 20mM H(3)BO(3) and 20mM NaH(2)PO(4) in methanol/water (90:10, v/v). The validity of the developed method was tested using cationic alkaloid compounds (ephedrine and berberine) as model analytes. Under the optimized conditions, this proposed method afforded limits of detection (LODs) of 0.5 and 1.1ng/mL with 300 and 1036-fold improvements in sensitivity for ephedrine and berberine, respectively, within 15min.     

Analysis of drying oils used as binding media for objects of art by capillary electrophoresis with indirect UV and conductivity detection

Capillary electrophoresis (CE) was applied to analyse the long-chain fatty acid composition of vegetable oils, and their degradation products formed upon ageing when drying oils are used as binding media. The analytes were detected with contactless conductivity detection (CCD) and indirect UV absorption, both detectors positioned on-line at the separation capillary. The long-chain fatty acids were resolved in a background electrolyte (BGE) consisting of phosphate buffer (pH = 6.86, 15 mM) containing 4 mM sodium dodecylbenzensulfonate, 10 mM Brij 35, 2% (v/v) 1-octanol and 45% (v/v) acetonitrile. As in this system dicarboxylic analytes, the products of oxidative degradation of unsaturated fatty acids, cannot be determined, a suitable background electrolyte was developed by the aid of computer simulation program PeakMaster. It makes use of a 10 mM salicylic acid, 20 mM histidine buffer, pH 5.85, which combines buffering ability with the optical properties obligatory for indirect UV detection. This buffer avoids system eigenpeaks, which are often impairing the separation efficiency of the system. Separation of the dicarboxylic analytes was further improved by a counter-directed electroosmotic flow (EOF), obtained by dynamically coating the capillary wall with 0.2 mM cetyltrimethylammonium bromide. Long-chain fatty acids and their decomposition products could be determined in recent and aged samples of drying oils, respectively, and in samples taken from two paintings of the 19th century.     

Electrochemiluminescence quenching as an indirect method for detection of dopamine and epinephrine with capillary electrophoresis

An electrochemiluminescence (ECL) inhibition method was developed as an indirect detection method for the determination of dopamine and epinephrine separated by capillary electrophoresis (CE). When the concentration of Ru(bpy)(3) (2+) was 50 muM diluted by 50 mM phosphate (pH 8.5) in the cell and 0.5 M tripropylamine (TPA) was added to the running buffer (10 mM phosphate, pH 9.0), an inhibition of ECL of the Ru(bpy)(3) (2+)/TPA system by the analytes was observed. Under the optimized conditions, the relative standard deviations of migration time and negative peak area were less than 1% and 3%, respectively, for 1 microM dopamine or 1 microM epinephrine (n = 10). Linear ranges of 0.1-10 microM for both analytes and the detection limits (signal-to-noise ratio S/N = 3) of 10 nM for dopamine and 30 nM for epinephrine were obtained.     

Determination of active constituents in Lonicera confusa DC. by capillary electrophoresis with amperometric detection

A method based on capillary electrophoresis with amperometric detection has been developed for the determination of luteolin, chlorogenic acid, 3,5-dicaffeoylquinic acid and caffeic acid in the dried flower buds, leaves and stems (three medicinal parts) of Lonicera confusa DC., respectively. The effects of several important factors such as detection potential, the concentration of the running buffer, separation voltage and injection time were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter carbon disc electrode at a working potential of + 0.90 V (vs saturated calomel electrode). The four analytes can be well separated within 10 min in a 40 cm-long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate-25 mM phosphate buffer (pH 8.0). The relationship between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.35 to 0.52 microM for all analytes. The proposed method has been successfully applied to the monitoring of bioactive constituents in the real plant samples with satisfactory assay results.     

Separation and determination of flavonoids using microemulsion EKC with electrochemical detection

A selective and sensitive method of microemulsion EKC (MEEKC) with electrochemical detection (ED) was developed for separation and determination of 14 flavonoids. In order to obtain the better stability for the studied flavonoids, oil (ethyl acetate) with low interfacial surface tension was employed as organic solvent. A running buffer composed of 0.9% (w/v, 30 mM) SDS, 0.9% (w/v, 21 mM) sodium cholate (SC), 0.9% (w/v, 121 mM) butan-1-ol, 0.6% (w/v, 68 mM) ethyl acetate, and 98.2% v/v 10 mM Na(2)B(4)O(7)-20 mM H(3)BO(3) buffer (pH 7.5) was applied for the separation of flavonoids. Under the optimum conditions, the relationship between peak currents and analyte concentrations was linear over about 1.3 and 1.7 orders of magnitude with detection limits (defined as S/N = 3) ranging from 0.02 to 0.5 microg/mL for all analytes. This method was applied for the determination of flavonoids in real samples with simple extraction procedures, and the assay results were satisfactory.     

Analysis of baicalein, baicalin and wogonin in Scutellariae radix and its preparation by microemulsion electrokinetic chromatography with 1-butyl-3-methylimizolium tetrafluoborate ionic liquid as additive

Microemulsion electrokinetic chromatography (MEEKC) using 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) ionic liquid (IL) as additive was developed for the analysis of baicalin, wogonin and baicalein in Scutellariae radix and its preparation. After conducting a series of optimizations, baseline separation was obtained for the analytes within 5min under the optimum conditions (sodium dodecyl sulfate (SDS) 0.88% (m/v) ethyl acetate 0.8% (v/v) butan-1-ol 0.2% (v/v) and the buffer composition were 25% acetonitrile (v/v), 7.5 mM BMIM-BF4 and 10 mM NaH2PO4, pH 8.2, applied voltage 17.5 kV and detection at 254 nm), the method has been successfully applied to the determination and quantification of the analytes in the extracts of S. radix (cooked), S. radix (raw) and Qingfeiyihuowan which was the preparation including S. radix.     

Determination of three bioactive constituents in moutan cortex by capillary electrophoresis with electrochemical detection.

Capillary electrophoresis with electrochemical detection has been employed for the separation and determination of the three active constituents (paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin) in traditional Chinese medicine, Moutan Cortex (root cortex of Paeonia suffruticosa Andrews). The effects of several important factors, such as the concentration of running buffer, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300 microm diameter carbon-disc electrode at a working potential of +0.90 V (versus SCE). The three analytes could be well separated within 7 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The relation between the peak current and the analyte concentration was linear over 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.4 to 0.7 microM for all analytes. The proposed method has been successfully applied to the determination of paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin in real plant samples with satisfactory assay results.     

Separation of organic and inorganic arsenic species by capillary electrophoresis using direct spectrophotometric detection

Capillary electrophoresis (CE) with UV detection was used for the determination of arsenite, arsenate, monomethylarsonic acid, dimethylarsinic acid, p-aminophenylarsonic acid, 4-hydroxy-3-nitrobenzenearsonic acid, 4-nitrophenylarsonic acid, phenylarsonic acid, and phenylarsine oxide. The electrophoretic mobilities of these anionic species were determined in a 20 mM phosphate buffer in a pH range from 4 to 11, which established pH 10 as the optimum for the separation. The target analytes were then separated in a fused-silica capillary using 20 mM NaHCO(3)-Na(2)CO(3) buffer, pH 10, as electrolyte and detected at 192 nm. Both normal- and reversed electroosmotic flow (EOF) separation modes were investigated and in the latter case, poly(diallydimethylammonium chloride) (PDDAC), was used for dynamic coating of the capillary and to provide a stable and reproducible reversed EOF (relative standard deviation RSD, 0.39%). The influence of electrolyte pH and composition, applied voltage, as well as EOF reversal protocols upon the method performance criteria were investigated. The optimised method provided limits of detection for the target analytes of 1.62, 6.22, 1.45, 1.83, 0.34, 0.40, 0.40, 0.18, and 0.30 mg/L As, respectively. Linearity was obtained in the range of 0.5-40 mg/L As (for aryl compounds) and from 5-100 mg/L As (for the remaining analytes). Reproducibility of peak areas was in the range of 0.8-5.5% RSD. The method was applied to the determination of four aryl arsenic compounds used as additives in animal feed. Analytes were extracted with 40 mM hydrochloric acid - acetonitrile 4:1 v/v, and then cleaned up by passing through a C(18) solid-phase extraction cartridge before analysis by CE with detection at 200 nm. Recoveries for the four analytes were in the range of 78.8-108.3%.     

Separation of two groups of oestrogen mimicking compounds using micellar electrokinetic chromatography

Two groups of compounds are being investigated due to their reported oestrogen mimicking characteristics in the environment. Separation of phenolic compounds and synthetic oestrogens using micellar electrokinetic chromatography is reported. Photodiode array detection is used for both separations. A standard separation buffer can be used for both groups of compounds including zwitterionic buffer cyclohexylamino-1-propanesulfonic acid, 20 mM at pH 11.5. It was found necessary to include 15% acetonitrile and 25 mM sodium dodecyl sulfate to aid separation and maintain analytes in solution. Optimum separations are achieved using 20 kV with hydrodynamic injection for 5 s. The relative standard deviation (RSD) for reproducibility was investigated for a mixture of phenols and synthetic oestrogens. For these compounds RSD was found to be <0.6% in all cases. Peak efficiencies ranged from 76,000 to 150,000 theoretical plates for different analytes. Application to environmental samples is discussed.     

Capillary electrophoresis coupled with electrochemiluminescence detection for the separation and determination of thyreostatic drugs in animal feed

A rapid, simple, and practical method for the determination of four of the most used thyreostatic drugs (methimazole, 2‐thiouracil, 6‐methyl‐2‐thiouracil, and 6‐propyl‐2‐thiouracil) using CE coupled to electrochemiluminescence detection has been established, based on the electrochemiluminescence enhancement of tris(2,2‐bipyridyl)ruthenium(II) with these analytes. Parameters that affect separation and detection were optimized. Under the optimum experimental conditions, the four analytes could be well separated within 11 min at the separation voltage of 16 kV in a running solution containing 20 mM phosphate buffer (pH 9.0) and 1.0 × 10^?4 M Ru(bpy)₃²⁺, with a solution of 20 mM phosphate buffer (pH 12.0) containing 1.0 × 10^?4 M Ru(bpy)₃²⁺ in the electrochemiluminescence detection cell. The detection limits for methimazole, 6‐methyl‐2‐thiouracil, 6‐propyl‐2‐thiouracil, and 2‐thiouracil were 0.1, 0.05, 0.05, and 0.01 μM, respectively. The proposed method was applied to analyze these drugs in spiked animal feed samples. The recoveries were 88.2～99.0 and 86.4～98.7% for the intraday and interday analyses, respectively. The RSDs were 2.7～4.8 and 1.8～5.0% for the intraday and interday analyses, respectively. The results demonstrate that the proposed method has promising applications in the detection of thyreostatic drugs in animal feeds.     

毛细管区带电泳法分析绿茶中的痕量成份

采用毛细管电泳/安培检测法(CE/AD)同时分离测定了绿茶中的芦丁、没食子酸、槲皮素、绿原酸等生物活性成分的含量, 考察了运行缓冲液酸度、浓度、分离电压、氧化电位和进样时间等实验参数对分离、检测的影响。在最优化条件下, 以300 μm碳圆盘电极为检测电极, 检测电位为+ 950 mV (vs. SCE) , 60 mmol/L硼酸盐运行缓冲液(pH 8.7)中, 上述各组分在20 min内可实现基线分离。各组分浓度与峰电流在3个数量级范围内呈良好线性, 检出限(S/N=3)在1.0×10^-7到1.0×10^-4g^.mL^-1范围,四种标样7次平行进样的相对标准偏差(RSD)小于3.0 %。该方法已成功地应用于绿茶中生物活性成分的测定, 结果令人满意。     

Comparison of two sample preconcentration strategies for the sensitivity enhancement of flavonoids found in Chinese herbal medicine in micellar electrokinetic chromatography with UV detection

Two on-column preconcentration techniques named stacking with reverse migrating micelles (SRMM) and anion selective electrokinetic injection and a water plug-sweeping with reverse migrating micelles (ASIW-sweep-RMM) were used and compared for concentration and separation of flavonoids in Chinese herbs using reverse migration micellar electrokinetic chromatography (RM-MEKC). The optimal background electrolyte (BGE) used for separation and preconcentration was a solution composed of 20mM phosphoric acid (H(3)PO(4))-100mM sodium dodecyl sulfate (SDS)-20% (v/v) acetonitrile (ACN) buffer (pH 2.0), the applied voltage was -15kV. To achieve reasonable results of the two techniques, the conditions which affected preconcentration were examined. A comparison of used techniques with normal hydrodynamic injection (5s), concerning enhancement factors and limits of detection (LODs) was presented. Under the optimum stacking conditions, about 27-37- and 45-194-fold improvement in the detection sensitivity was obtained for SRMM and ASIW-sweep-RMM, respectively, compared to usual hydrodynamic sample injection (5s). The LODs (S/N=3) for SRMM and ASIW-sweep-RMM in terms of peak height, can reach down to 1.15 x 10(-2) microg/ml for hesperetin and 2.4 x 10(-3) microg/ml for nobiletin, respectively. Finally, the amounts of the six flavonoids in extract of Fructus aurantii Immaturus were successfully determined using ASIW-sweep-RMM. The six analytes were baseline separated with sample matrix under the optimum ASIW-sweep-RMM conditions and the experimental results showed that preconcentration was well achieved after the dilution of sample solutions.     

Combined use of ionic liquid and sulfobutylether‐β‐cyclodextrin as electrolyte additives for separation and determination of camptothecin alkaloids by CZE

This work reported that ionic liquid (IL) ([Bmim] [PF₆]) and sulfobutylether‐β‐CD (SBE‐β‐CD) were used as electrolyte additives for the separation and determination of camptothecin (CPT) alkaloids by CZE. Separation parameters such as the buffer type, pH, and concentration of the running buffer, the concentration of SBE‐β‐CD and IL, temperature, and separation voltage were all investigated in order to achieve the maximum possible resolution. The four analytes were baseline separated within 10 min in capillary at the separation voltage of 15 kV with a running buffer consisting of 20 mM borate buffer, 20 mM IL, and 100 mM SBE‐β‐CD at pH 9.0. Under such conditions, good linearity about two orders of magnitudes of peak areas was achieved for the investigated CPT alkaloids with the correlation coefficients ranging from 0.9946 to 0.9985. For all analytes, detection limits (S/N = 3) and quantitation limits (S/N = 10) range from 0.05 to 0.92 μg/mL and 0.17 to 3.06 μg/mL, respectively. The proposed method has not only been successfully applied to the separation and determination of CPT alkaloids but also showed that IL seemed to be a promising additive in CZE separation.     

A highly sensitive method for the analysis of nitrite ions by capillary zone electrophoresis using water-soluble aminophenylporphyrin derivative as chromogenic reagent

The water soluble 5-p-aminophenyl)-10,15,20-tris(p-sulfonatophenyl) porphyrin, 4, acts as an extremely efficient chromogenic reagent for the detection of very low amounts of nitrites. The amino group of porphyrin 4 reacts smoothly with nitrite in acidic conditions 0.2 M HCl) producing the corresponding diazo-porphyrin derivative which is stable and does not show any appreciable hydrolysis to phenol within 6 h. The reaction is carried out in the presence of 25 mM heptakis-(2,6-di-O-methyl)-beta-cyclodextrin that prevents precipitation of the protonated form of porphyrins 4 or 5 due to the formation of strong inclusion complexes. The capillary zone electrophoresis of the diazoporphyrin and amino-porphyrin mixture shows severe peak tailing. However, symmetrical peaks can be obtained by adding 5 mM beta-cyclodextrin to the background electrolyte (20 mM phosphate buffer, pH 7.0). Calibration curve for nitrite analysis is linear up to 0.25 mM nitrite and the detection limit (at a signal-to-noise ratio of 3) has been estimated to be a 1 microM (50 ppb) of nitrite concentration in aqueous solutions.     

Micelle to solvent stacking of two alkaloids in nonaqueous capillary electrophoresis

This paper for the first time describes the development of micelle to solvent stacking (MSS) to nonaqueous capillary electrophoresis (NACE). In this proposed MSS-NACE, sodium dodecyl sulfate (SDS) micelles transport, release, and focus analytes from the sample solution to the running buffer using methanol as their solvent. After the focusing step, the focused analytes were separated via NACE. The focusing mechanism and influencing factors were discussed using berberine (BBR) and jatrorrhizine (JTZ) as model compounds. And the optimum condition was obtained as following: 50 mM ammonium acetate, 6% (v/v) acetic acid and 10 mM SDS in redistilled water as sample matrix, 50 mM ammonium acetate and 6% (v/v) acetic acid in pure methanol as the running buffer, -20 kV focusing voltage with 30 min focusing time. Under these conditions, this method afforded limits of detection (S/N=3) of 0.002 μg/mL and 0.003 μg/mL for BBR and JTZ, respectively. In contrast to conventional NACE, the concentration sensitivity was improved 128-153-fold.     

Ion chromatographic determination of cyanate in saline gold processing samples.

An ion chromatographic method was developed for the determination of cyanate (CNO-) in saline gold processing samples. The method is based on the use of a very weak-eluting buffer (5 mM sodium borate) and a Dionex AS4A-SC anion-exchange column. This weak-eluting buffer facilitates the wide chromatographic separation of chloride (Cl-) from CNO-. After CNO- has been eluted, the switch to 1.8 mM Na2CO3-1.7 mM NaHCO3 buffer allows the fast elution of other major inorganic and organic anions. Validation of this method, including identification of interferences, has shown that this method is reliable, accurate, sensitive (detection limit, 0.1 mg/l CNO-) and reproducible.     

Simultaneous separation of eight beta-adrenergic drugs using titanium dioxide nanoparticles as additive in capillary electrophoresis

The analysis is described for separating seven beta-adrenergic blocking agents (atenolol, celiprolol, clorprenaline, fenoterol, metoprolol, propranolol, terbutaline) and clenbuterol (sympathomimetic beta-2 receptor stimulating agonist, decongestant and bronchodilator, illicit anabolic used in athletics) by CE with UV detection. In order to simultaneously separate all analytes, Tris-H3PO4 solution was applied containing titanium dioxide nanoparticles (TiO2 NPs) as BGEs. The effects of important factors, such as concentration of TiO2 NPs, optimum pH, run buffer concentration, and separation voltage, were investigated so as to achieve best CE separation. The eight analytes could be well separated applying a separation voltage of 15 kV in 75 mM Tris-H3PO4 buffer at a pH of 2.40, containing 6.0 x 10(-6) g/mL TiO2 NPs. Under these optimal conditions, the RSDs for peak areas and for migration times were less than 2.7 and 2.3%, respectively. The detection limits were 0.1 microg/mL for celiprolol, 0.1 microg/mL for propranolol, 0.2 microg/mL for fenoterol, 1.0 microg/mL for atenolol, 1.0 microg/mL for clenbuterol, 1.0 microg/mL for clorprenaline, 1.0 microg/mL for metoprolol, and 1.0 microg/mL for terbutaline. The proposed method was successfully applied for the rapid CE determination of the frequently applied antihypertensive beta-blocking compounds atenolol, metoprolol, terbutaline, and propranolol in pharmaceutical tablets.     

Determination of phenols in <Emphasis Type="Italic">Fructus Lycii</Emphasis> by capillary electrophoresis with electrochemical detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been developed for the determination of bioactive phenols in Fructus Lycii samples. Under the optimum conditions, the seven analytes could be well separated within 24 min in a 80 mM borax running buffer. Good linear relationship was established between peak current and concentration of analytes over three orders of magnitude with detection limits (S/N = 3) ranging from 3.5 × 10⁻⁸ to 6.0 × 10⁻⁸ g/mL for all analytes. The proposed method has been successfully applied for the study on the efficiency of electrochemically active ingredients in polar extracts of Fructus Lycii after a relatively simple pretreatment.     

Micellar electrokinetic chromatography with on-line Fourier transform infrared detection

Micellar electrokinetic chromatography (MEKC) was successfully coupled to Fourier transform infrared (FTIR) detection, using a micromachined IR-transparent flow cell with an optical path length of 15 micro m for the on-line detection of five neutral analytes. Tight connections between the flow cell and the capillaries were achieved by creating a small O-ring of UV-curing epoxy adhesive on the sharply cut capillary ends. The background electrolyte consisted of 15 mM phosphate buffer at pH 7 and 40 mM sodium dodecyl sulfate (SDS). Five analytes (paracetamol, caffeine, p-nitro benzyl alcohol, m-nitrophenol and p-nitrophenol) were successfully separated, yielding detailed IR stack plots that could be used for quantification and identification. Linear calibration graphs were obtained for each individual analyte present in mixtures at concentrations up to 10 mM. The limit of detection (3 S/N) ranged between 1.1 and 1.5 mM (1.2-1.8 ng). Analytes were identified by comparing spectra obtained during the MEKC separation with those resulting from completely filling the capillary with each individual analyte dissolved in the micelle-containing electrolyte. Information on the specific functional groups of all analytes could be elucidated from the spectra. Since FTIR is a nondestructive detection technique, a conventional on-line UV detector was introduced directly after the developed IR flow cell to test the system's performance and to demonstrate that tandem FTIR and UV detection is feasible.     

Nonaqueous capillary electrophoresis with laser-induced fluorescence detection: a case study of comparison with aqueous media

A novel method based on separation by nonaqueous capillary electrophoresis (NACE) combined with laser-induced fluorescence (LIF) detection was developed and compared with classic aqueous modes of electrophoresis in terms of resolution of solutes of interest and sensitivity of the fluorescence detection. Catecholamines derivatized with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) were chosen as test analytes for their subtle fluorescence properties. In aqueous systems, capillary zone electrophoresis (CZE) was not suitable for the analysis of test analytes due to complete fluorescence quenching of NBD-labeled catecholamines in neat aqueous buffer. The addition of micelles or microemulsion droplets into aqueous running buffer can dramatically improve the fluorescence response, and the enhancement seems to be comparable for micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC). As another alternative, NACE separation was advantageous when performing the analysis under the optimum separation condition of 20 mM sodium tetraborate, 20 mM sodium dodecyl sulfate (SDS), 0.1% (v/v) glacial acetic acid, 20% (v/v) acetonitrile (ACN) in methanol medium after derivatization in ACN/dimethyl sulfoxide (DMSO) (3:2, v/v) mixed aprotic solvents containing 20 mM ammonium acetate. Compared with derivatization and separation in aqueous media, NACE-LIF procedure was proved to be superior, providing high sensitivity and short migration time. Under respective optimum conditions, the NACE procedure offered the best fluorescence response with 5-24 folds enhancement for catecholamines compared to aqueous procedures. In addition, the mechanisms of derivatization and separation in nonaqueous media were elucidated in detail.