Tripod self-assembled monolayer on Au(111) prepared by reaction of hydroxyl-terminated alkylthiols with SiCl4

Infrared reflection spectroscopy (IRS), single wavelength ellipsometry, and density functional theory were used to elucidate the structure of a molecular tripod self-assembled monolayer (SAM) on polycrystalline gold{111} substrates. The tripod SAM was formed by the reaction of SiCl4 with a densely packed monolayer of 2-mercaptoethanol, 6-mercaptohexanol, and 16-mercaptohexadecanol under inert atmosphere. After reaction with SiCl4, IRS spectra show an intense absorption at approximately 1112 cm(-1) that is attributed to Si-O-C asymmetric stretching vibration of a molecular tripod structure. Harmonic vibrational frequencies computed at the B3LYP/6-311+g** level of theory for the mercaptoethanol tripod SAM closely match the experimental IRS spectra, giving further support for the tripod structure. When rinsed with methanol or water, the Si-Cl-terminated SAM becomes capped with Si-OMe or Si-OH. The silanol-terminated tripod SAM is expected to find use in the preparation of thin zeolite and silica films on gold substrates.     

Influence of another, ruthenium containing, electroactive component on the apparent heterogeneous electron transfer rate constant of a ferrocene containing molecular wire in a Self-Assembled Monolayer of 11-hydroxyundecanethiol on gold

The co-adsorption of three thiol compounds on gold, two of them being electroactive, yields a Self-Assembled Monolayer (SAM) the behaviour of which was studied by impedance spectroscopy. The two redox active thiols have been chosen to have a good miscibility in a supporting inert component, non-degenerate first-oxidation redox couples, and distinct heterogeneous electron transfer rate constant. However, in the ternary monolayer, the slowest process was found to be concentration dependent on the other redox site. This unexpected behaviour should thus be taken into account when using multi-component SAM as a support for integrated devices.     

Phase behavior of amphiphiles at liquid crystals/water interface: A coarse-grained molecular dynamics study

We present a coarse-grained molecular dynamics simulation study of phase behavior of amphiphilic monolayers at the liquid crystal （LC）/water interface. The results revealed that LCs at interface can influence the lateral ordering of amphiphiles. Particularly, the amphiphile tails along with perpendicularly penetrated LCs between tails undergo a two-dimension phase transition from liquid-expanded into a liquid-condensed phase as their area density at interface reaches 0.93. While, the liquid-condensed phase of the monolayer never appears at oil/water interface with isotropic shape oil particles. These findings reveal the penetration of anisotropic LC can promote ordered lateral organization of amphiphiles. Moreover, we find the phase transition point is shifted to lower surface coverage of amphiphiles when the LCs have larger affinity to the amphiphile tails.     

Effects of incorporation of various amphiphiles into recipient liposome membranes on inter-membrane protein transfer.

To obtain information about the factors governing spontaneous inter-membrane protein transfer, we examined the effects of incorporation of various amphiphilic compounds in dimyristoylphosphatidylcholine (DMPC) liposomes on protein transfer from influenza virus-infected cells to the liposomes, and analyzed the physical properties of these liposome membranes. The incorporation of amphiphilic compounds, negatively charged dicetylphosphate (DCP), dipalmitoylphosphatidylserine (DPPS) or positively charged dimethyldipalmitoylammonium (DMDPA), into DMPC liposomal membranes enhanced protein transfer. The liposomes containing DCP, DPPS or DMDPA were unaffected by osmotic shock caused by external addition of glucose, suggesting a decrease in lipid packing in the liposomal membranes. Furthermore, calorimetric study of these liposomes showed that a phase separation occurred partially in the liposomal membranes. Accordingly, the membranes of DMPC liposomes containing DCP, DPPS and DMDPA should be distorted due to the coexistence of two phases, gel and liquid crystalline, in the membranes. Consequently, the membrane distortion could be responsible for the enhancement effects of the amphiphiles on the inter-membrane protein transfer from influenza virus-infected cells to the liposomes.     

Dewetting-induced membrane formation by adhesion of amphiphile-laden interfaces

We introduce an approach for forming bilayer polymer membranes by adhesion of amphiphile-laden interfaces. This adhesion is induced by a reduction of solvent quality for the amphiphilic diblock copolymers through selective evaporation of good solvent in the solvent mixture. By combining this membrane formation mechanism with a double-emulsion-templated approach for vesicle formation, we fabricate monodisperse polymersomes that exhibit excellent membrane uniformity, and structural stability, using a method that has high encapsulation efficiency. Moreover, we also show that the technique is versatile and can be applied to different block copolymers. The ability to direct the assembly of amphiphiles into a membrane creates new opportunities to engineer the structures of vesicles on the level of the individual bilayer leaflets.     

Monolayers of twisted binaphthyls for aromatic crystallization at low nucleation densities and high growth rates

Monolayers of 1,1'-bi-2-naphthol (BN) derivatives, of which the two naphthalene rings are twisted along the carbon(1)-carbon(1') single bond, were studied for their conformational effect on the growth of pentacene crystals on their monolayer surface. BN monolayers with H and Br at 6,6'-positions (H-BN and Br-BN) were prepared by immersion-coating in toluene solution of the corresponding BNSiCl2. Pentacene was thermally evaporated onto the H-BN and Br-BN monolayers, silica, octadecylsilyl (ODTS) SAM, and a micropattern of H-BN and ODTS SAM. Pentacene crystals were also grown on the SAMs of 1-naphthylsilyl(NPh), phenylsilyl(Ph), and diphenylsilyl (DPh) groups, which are aromatic and have contact angle values similar to those of the the BN monolayers. AFM images of the crystals at the early stage of growth indicated that the BN monolayers suppressed the nucleation while facilitating the growth of nuclei to larger crystals. The low nucleation density and high growth rate are accounted for by the amorphous nature of the twisted BN monolayer surface where the intermolecular interaction between neighboring adsorbates is likely to be suppressed. The results offer new insights into designing surfaces for controlling the crystallization kinetics of organic materials.     

Interfacial behavior of a series of amphiphilic block co-dendrimers

Amphiphiles with a dendritic structure are attractive materials as they combine the features of dendrimers with the self-assembling properties and interfacial behavior of amphiphiles. We have designed and synthesized three series of segmented amphiphilic block co-dendrimers (Janus-type) and studied their interfacial properties on the Langmuir trough. Various behaviors are observed with, as a rule, the lowest generation dendrimers behaving more or less like traditional amphiphiles while the larger molecules tend to exhibit more complicated isotherms, with a non-straightforward temperature dependence, one particular molecule seemingly forming supramolecular assemblies spontaneously. The results presented here, obtained on a series of molecules where many parameters have been varied systematically, show the limits that should be kept in mind when designing amphiphilic dendrimers.     

Two-component membrane material properties and domain formation from dissipative particle dynamics

The material parameters (area stretch modulus and bending rigidity) of two-component amphiphilic membranes are determined from dissipative particle dynamics simulations. The preferred area per molecule for each species is varied so as to produce homogeneous mixtures or nonhomogeneous mixtures that form domains. If the latter mixtures are composed of amphiphiles with the same tail length, but different preferred areas per molecule, their material parameters increase monotonically as a function of composition. By contrast, mixtures of amphiphiles that differ in both tail length and preferred area per molecule form both homogeneous and nonhomogeneous mixtures that both exhibit smaller values of their material properties compared to the corresponding pure systems. When the same nonhomogeneous mixtures of amphiphiles are assembled into planar membrane patches and vesicles, the resulting domain shapes are different when the bending rigidities of the domains are sufficiently different. Additionally, both bilayer and monolayer domains are observed in vesicles. We conclude that the evolution of the domain shapes is influenced by the high curvature of the vesicles in the simulation, a result that may be relevant for biological vesicle membranes.     

Bis-Thioether-Containing Lipid Chains in Cationic Amphiphiles: Physicochemical Properties and Applications in Gene Delivery

Cationic amphiphiles featuring two thioether functions in each lipid chain of bicatenar cationic amphiphiles are reported here for the first time. The physicochemical properties and transfection abilities of these new amphiphiles were compared with those of already reported analogues featuring either (i) saturated, (ii) unsaturated or (iii) mono-thioether containing lipid chains. The homogeneity of the series of new compounds allowed to clearly underscore the effect of bis-thioether containing lipid chains. This study shows that besides previous strategies based on unsaturation or ramification, the incorporation of two thioether functions per lipid chain constitutes an original complementary alternative to tune the supramolecular properties of amphiphilic compounds. The potential of this strategy was evaluated in the context of gene delivery and report that two cationic amphiphiles (i. e. 4 a and 4 b) can be proposed as new efficient transfection reagents.     

Two-dimensional arrays of amphiphilic Zn2+-cyclens for guided molecular recognition at interfaces

The sterically guided molecular recognition of nucleobases, phosphates, adenosine, and uridine nucleotides on Langmuir monolayers and Langmuir-Blodgett monolayers of amphiphilic mono- or bis(Zn2+-cyclen)s assembled on thiolated surfaces was investigated. The stepwise selective binding of metal ions, uracil, or phosphate by dicetyl cyclen monolayers with variously tuned structures at the air/water interface was corroborated by the measurements of the corresponding LB films deposited onto quartz crystals. Two types of recognition surfaces were fabricated from Zn2+-dicetyl cyclen. The surface covered with a complex preformed in the Langmuir monolayer was capable both of imide and of phosphate binding. The similar complex formed directly in an LB film on thiolated gold was inactive with respect to imide. The surface plasmon resonance measurements evidenced the stepwise assembly of complementary nucleotides on SAM/LB templates through consecutive phosphate-Zn2+-cyclen coordination. Base pairing between nucleotides resulted in a formation of A-U bilayers comprising two complementary monolayers. Finally, we report on SAM/LB patterns designed for divalent molecular recognition of uridine phosphate by amphiphilic bis(Zn2+-cyclen).     

Spontaneous formation of vesicles from mixed amphiphiles with dispersed molecular weight: Monte Carlo simulation

The spontaneous formation of vesicles from amphiphiles with dispersed molecular weight (MW) as well as with mono-MW has been studied by a lattice Monte Carlo simulation. Both pure and mixed amphiphiles were self-assembled into vesicles under appropriate conditions. When mixed amphiphiles were examined, the amphiphiles with longer hydrophilic blocks preferred to segregate into the outer monolayer of the resultant vesicles, which is consistent with the experimental observations in recent literature. The kinetic study reveals that the increase of vesicle size is mainly caused by the mechanism of vesicle fusion at the early stage, and the evaporation-condensation mechanism cannot be neglected at the late stage. The fusion of vesicles is accompanied by translocation of chains from the outer monolayer to the inner monolayer. For mixed amphiphiles, the degree of segregation exhibits a size dependence of the vesicle. Compared to the chains with shorter hydrophilic blocks, those with longer hydrophilic blocks exhibit stronger trends to translocate from the outer monolayer to the inner one in vesicle self-adjustment, which leads to the quasi-equilibrium asymmetric distribution of the hydrophilic blocks in the post-fused vesicles.     

A computer simulation study of the segregation of amphiphiles in binary immiscible matrices: short asymmetric copolymers in short homopolymers

The bulk and interfacial properties of ternary mixtures with asymmetric amphiphiles (A2B8) in A2 and B2 matrices and in A2 and B10 matrices are investigated by the dissipative particle dynamics type of molecular-dynamics simulations. The monomer concentrations of A2B8(phiA2B8) studied are below the critical micelle concentration (phiA2B8(cmc)) for the formation of micelles in the presence of an adsorbed amphiphilic monolayer at the interface. Macrophase separation from the mixed phase to the segregated state with A-rich and B-rich coexisting phases and the segregation of A2B8 at the interface are thermodynamically gradual but are accompanied by a pronounced stretching and orientation of the constituent chains. The segregation of A2B8 at the interface broadens the interfacial region and reduces the interfacial tension. The chain conformation of the asymmetric amphiphilic molecules and the interfacial properties are dominated by the majority block in the amphiphilic chain and dependent on the composition of the matrix in contact with the majority block. In the A2 and B2 matrices, the B8 blocks in A2B8 chains at the interface resemble a wet brush swollen by short B2 chains. Swelling is responsible for the pronounced stretching and orienting of the amphiphilic chains and the reduced interfacial amphiphile enrichment. At the same interfacial amphiphile excess, however, swollen amphiphiles are more efficient in reducing the interfacial tension than nonswollen amphiphiles.     

Odd-even chain length-dependent order in pH-switchable self-assembled layers

The reversible self-assembly of a series of bipolar amphiphiles, alpha,omega-bis(3- or 4-amidinophenoxy)alkanes (chain length n = 5-12), on mercaptoalkanoic acid-functionalized gold surfaces (chain length n = 10, 11, 14, 15) has been studied by in-situ ellipsometry, IR reflection absorption spectroscopy (IRAS), and atomic force microscopy (AFM). The layer order, amphiphile orientation, and tendency to form bilayers depends on the position of the amidine substituent, the alkyl chain length of both the amidine amphiphile and the underlying acid self-assembled monolayer (SAM), and whether the amidine alkyl chain contained an even or odd number of methylene groups. Thus, para-substituted bisbenzamidines containing more than six methylene groups (n>6) and with an odd number (n = 7, 9, 11) tended to form bilayered structures, whereas those containing an even number formed monolayers when adsorbed on SAMs of the long-chain acids (n = 14, 15). This behavior also correlated with the average tilt angle of the benzene moieties of the amphiphiles, as estimated by IRAS. The odd-numbered chains gave lower tilt angles than the even-numbered ones, and a possible model that accounts for these results is proposed. IRAS also revealed a higher order of the odd-numbered chains and an increasing hydrogen-bonding contribution with increasing chain length. Additional evidence for the proposed bilayered assemblies and their reversibility was obtained by AFM. Images obtained from the assembly of decamidine on a SAM of mercaptohexadecanoic acid in a pH 9 borate buffer revealed domains of similar size to that of the underlying acid SAM (20-30 nm), but less densely packed. By acidifying the solution, the second layer was destabilized and a very smooth layer with few defects appeared. Further acidification to pH 3 also destabilized the first layer.     

Lyotropic liquid crystalline phase behavior of amphiphilic monomers and polymers having a rod-like hydrophobic moiety

Distinct changes in the lyotropic mesophase behaviour of nonionic polyethyleneglycol containing amphiphiles are observed, when rigid, rod-like molecular units are introduced into the hydrophobic part of these amphiphiles, or when the amphiphiles are added as side chains to poly(methylhydrogene siloxane), yielding amphiphilic side chain polymers. Low molar mass amphiphiles with a dominating rigid, rod-like hydrophobic unit form planar-like micelles which aggregate into lamellar mesophases. Compared with their corresponding low molar mass amphiphiles, amphiphilic side chain polymers show a distinct stabilization of mesophases composed of anisometric micelles, i.e. hexagonal H₁-phases (built up by rod shaped micelles), and lamellar L -phases (built up by planarshaped micelles). In addition, several of the polymeric amphiphiles exhibit the formation of a lyotropic nematic N_c-phase regime. Optically isotropic I₁-phases composed of approximately spherical-like micelles are, on the other hand, disfavoured by the polymerfixation. Investigations of monodisperse amphiphilic side chain oligomers reveal a linear relationship between the thermal stability of the individual mesophases and the logarithm of the degree of polymerization. Changes in mesophase behaviour, due to the introduction of rigid, rod-like molecular units into the hydrophobic part of the low molar mass amphiphiles, are ascribed to packing restraints of the amphiphiles in the micelles. Alterations in mesophase behaviour which occur as a consequence of polymerfixation are discussed in terms of changes in micellar kinetics, packing restraints, and changes in the interaction between adjacent hydrophobic layers of neighbouring micelles.     

Nanomolar protein sensing with embedded receptor molecules

A new concept of protein sensing at the air-water interface is introduced, based on amphiphilic receptor molecules embedded in a lipid monolayer. The process begins with incorporation of a small amount (0.13 equiv) of one or two different calix[4]arenes, adorned with charged functional groups at their upper rims, into a stearic acid monolayer. These doped monolayers are subsequently shown to attract peptides and proteins from the aqueous subphase. Depending on the host structure, the monolayers can be made selective for basic or acidic proteins. A working model is proposed, which explains the large observed p/A shifts with reincorporation of excess receptor molecules into the lipid monolayer after complex formation with the oppositely charged protein. This requires a self-assembly of multiple calixarene units over the protein surface, which bind the protein in a cooperative fashion. Oppositely charged calixarene derivatives do not form molecular capsules inside the monolayer, but rather remain separate inside the lipid layer, adopting a perpendicular orientation. They combine their hydrogen bond donor and acceptor capacities, and thus markedly enhance the sensitivity of the sensor system toward proteins, pushing the detection limits to 10 pM concentrations. The response pattern obtained from various receptor units inside the monolayer toward the same protein creates a fingerprint for this protein, which can hence be selectively detected at nanomolar concentrations (pattern recognition).     

Aqueous phase behavior of polyelectrolytes with amphiphilic counterions modulated by cyclodextrin: the role of polyion flexibility

Polyelectrolytes with amphiphilic counterions, PEACs, are water insoluble because the amphiphiles self-assemble into highly charged micelles that strongly associate with the equally highly charged polyions. However, in the presence of water soluble cyclodextrins (CDs) that form inclusion complexes with the amphiphiles and prevent micellization, PEACs become soluble as the dispersed amphiphiles behave essentially as simple monovalent counterions. In this paper, we illustrate, by example, how strongly the ternary phase behavior of PEAC:CD:water depends on the polyion flexibility; for a highly flexible polyion (polyacrylate) the amphiphilic aggregates dictate the phase behavior, whereas a much stiffer polyion (DNA) itself dictates liquid crystalline ordering.     

Chemical grafting of biphenyl self-assembled monolayers on ultrananocrystalline diamond

We have investigated the formation of self-assembled monolayers (SAMs) of 4'-nitro-1,1-biphenyl-4-diazonium tetrafluoroborate (NBD) onto ultrananocrystalline diamond (UNCD) thin films. In contrast to the common approach to modify diamond and diamond-like substrates by electrografting, the SAM was formed from the saturated solution of NBD in acetonitrile by pure chemical grafting. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and near edge X-ray absorption fine structure spectroscopy (NEXAFS) have been used to verify the direct covalent attachment of the 4'-nitro-1,1-biphenyl (NB) SAM on the diamond substrate via stable C-C bonds and to estimate the monolayer packing density. The results confirm the presence of a very stable, homogeneous and dense monolayer. Additionally, the terminal nitro group of the NB SAM can be readily converted into an amino group by X-ray irradiation as well as electrochemistry. This opens the possibility of in situ electrochemical modification as well as the creation of chemical patterns (chemical lithography) in the SAM on UNCD substrates and enables a variety of consecutive chemical functionalization for sensing and molecular electronics applications.     

Study of thermodynamic parameters in amphiphilic systems by lattice Monte Carlo: effect of tails and heads

Results from three-dimensional lattice Monte Carlo simulations of amphiphile–solvent mixtures are presented. The chemical potential is derived from the monomer distribution in different clusters rather than using a Widom particle insertion approach. The effect of tail and head characteristics on the non-ideality of these systems, aggregation number, and premicellar phenomena is considered. The aggregation number and CMC behavior of the simulated amphiphilic systems are compared with existing experimental results for non-ionic amphiphiles. Two kinds of polydispersity changing with total concentration of surfactants are observed which are related to phase transition phenomena. Shape variations in clusters are studied by calculating the eigenvalues of the gyration matrix; it is shown that large clusters are non-spherical. With the Maclaurin’s expansion of activity coefficient into volume fraction, the distribution of excess chemical potential with changing aggregation number is considered. Study of the degree of non-ideality of these amphiphiles reveals that asymmetric amphiphiles are characterized by greater non-ideality than symmetric amphiphiles. Goldstein’s parameters are calculated taking non-ideality into consideration. The difference between the phenomenological model and the simulation data is investigated.     

Electron paramagnetic resonance study of amphiphiles partitioning behavior in desiccation-tolerant moss during dehydration

Desiccation tolerance is a crucial characteristic for desert moss surviving in arid regions. Desiccation procedure always induces amphiphiles transferring from the polar cytoplasm into lipid bodies. The behavior of amphiphiles transferring can contribute to the enhancement of desiccation tolerance and the reduction of plasma membrane integrity simultaneously. The effects of amphiphiles partitioning into the lipid phase during water loss has been studied for pollen and seeds using electron paramagnetic resonance (EPR) spectroscopy. However, desiccation-tolerant high plants occur among mosses, several angiosperms and higher plants seeds or pollens. They have different strategies for survival in dehydration and rehydration. A desiccation-tolerant moss Tortula desertorum was used to investigate the behaviors of amphiphilic molecules during drying by spin label technology. There are small amount of amphiphilic probes partitioning into membrane during moss leaves dehydration, comparing with that in higher plants. Cytoplasm viscosity changed from 1.14 into glass state only dehydration less than 60 min. Moss leaves lost plasma membrane integrity slightly, from 0.115 to 0.237, occurred simultaneously with amphiphiles partition. The results showed the more advantages of mosses than higher plants in adapting fast dehydration. We propose that EPR spin label is feasible for studying the amphiphiles partitioning mechanisms in membrane protection and damage for desiccation-tolerant mosses.     

A stripe-to-droplet transition driven by conformational transitions in a binary lipid-lipopolymer mixture at the air-water interface

We report the observation of an unusual stripe-droplet transition in precompressed Langmuir monolayers consisting of mixtures of poly(ethylene) glycol (PEG) amphiphiles and phospholipids. This highly reproducible and fully reversible transition occurs at approximately zero surface pressure during expansion (or compression) of the monolayer following initial compression into a two-dimensional solid phase. It is characterized by spontaneous emergence of an extended, disordered stripe-like morphology from an optically homogeneous phase during gradual expansion. These stripe patterns appear as a transient feature and continuously progress, involving gradual coarsening and ultimate transformation into a droplet morphology upon further expansion. Furthermore, varying relative concentrations of the two amphiphiles and utilizing amphiphiles with considerably longer ethylene glycol headgroups reveal that this pattern evolution occurs in narrow concentration regimes, values of which depend on ethylene oxide headgroup size. These morphological transitions are reminiscent of those seen during a passage through a critical point by variations in thermodynamic parameters (e.g., temperature or pressure) as well as those involving spinodal decomposition. While the precise mechanism cannot be ascertained using present experiments alone, our observations can be reconciled in terms of modulations in competing interactions prompted by the pancake-mushroom-brush conformational transitions of the ethylene glycol headgroup. This in turn suggests that the conformational degree of freedom represents an independent order parameter, or a switch, which can induce large-scale structural reorganization in amphiphilic monolayers. Because molecular conformational changes are pervasive in biological membranes, we speculate that such conformational transition-induced pattern evolution might provide a physical mechanism by which membrane processes are amplified.