Large-volume sample stacking for on-capillary sample enrichment in the determination of naphthalene- and benzenesulfonates in real water samples by capillary zone electrophoresis

We investigated the on-line preconcentration of a test mixture of 15 substituted and unsubstituted naphthalene(NSs) and benzenesulfonates (BZSs) by large-volume sample stacking (LVSS). Analyses were carried out by capillary zone electrophoresis (CZE) with on-column UV detection. In particular, we focused on how experimental variables such as the inside diameter of the capillary, the volume of sample introduced and polarity switching influenced the enrichment procedure. The best results were obtained when 300 nl were injected and stacked using a bubble cell capillary. Under these conditions, LVSS increased the detector response of conventional hydrodynamic injection by a factor of 40. The limits of detection of the method were between 5 and 10 microg l(-1). Determinations were reproducible, in terms of peak area and migration time, under such conditions. The performance of the method was examined by determining NS and BZS in real samples, such as tap, river and surface waters and inflow/outflow waters from a water treatment plant. Real samples were injected directly into the CZE column with little or no preparation.     

Multiresidue determination of sulfonylurea herbicides by capillary electrophoresis for hydrolysis studies in water and sediments

Twelve sulfonylurea herbicides (bensulfuron-methyl, sulfometuron-methyl, ethametsulfuron-methyl, triasulfuron, tribenuron-methyl, nicosulfuron, chlorimuron-ethyl, thifensulfuron-methyl, primisulfuron-methyl, metsulfuron-methyl, chlorsulfuron, and amidosulfuron) were separated by free zone capillary electrophoresis with migration times less than 20 min. The additional simultaneous determination of the 2,3-dihydro-3-oxobenzisosulfonazole (saccharin) degradation product was possible after application of a temperature and voltage gradient. Detector responses (absorbances) at 239 and 220 nm were linear between 0.1 and 10.0 g/ml. After extraction with acetonitrile, recoveries for the same concentration range from two different sediments were higher than 90% with variation coefficients lower than 16%. Dissociation constants of the sulfonylurea herbicides were determined.     

Determination of sulfonylurea herbicides in soil extracts by solid-phase extraction and capillary zone electrophoresis

Summary Sulfonylurea herbicides in soil extracts were concentrated using off-line solid-phase extraction (SPE), and determined by capillary zone electrophoresis (CZE) and UV detection. The method involves extraction of soils with 0.1 M NaHCO₃ solution and subsequent preconcentration by using C₁₈ cartridges prior to separation of the pesticide using CZE. The results show that a C₁₈ cartridge is suitable for the purification of sulfonylurea herbicides in soil extracts with the recoveries ranging from 65–103%. The separation conditions affecting the resolution and detection sensitivity was systematically investigated. The sulfonylureas were resolved well using 30 mM sodium acetate (NaAc)/acetic acid (HAc)+10% acetonitrile (ACN) buffer at pH 4.80. The calibration plots for the test solutes in the concentration of 0.2–50 mg L⁻¹ were linear with detection limits in the range of 0.05–0.10 mgL⁻¹. The proposed method has been successfully demonstrated for the determination of sulfonylurea herbicides in soil samples.     

Multiresidue method for determination of sulfonylurea herbicides in water by liquid chromatography with confirmation by capillary electrophoresis

A liquid chromatographic method with comfirmation by capillary electrophoresis was used to determine 12 sulfonylurea herbicides in agricultural water. Analysis of 3 different water matrixes fortified at 2 levels gave good recoveries with adequate sensitivity at the 0.1 ppb level. A portion of the water was acidified with acetic acid and loaded onto an RP-102 solid-phase extraction (SPE) cartridge, and the extract was cleaned up on an alumina SPE cartridge. Extracts were desalted with an RP-102 SPE cartridge before instrumentation. Samples needing chemical filtration, such as pond water, required additional cleanup with a SAX SPE cartridge before the alumina cleanup step. Data were compiled for both determinative techniques and evaluated.     

Large volume sample stacking in capillary zone electrophoresis for the monitoring of the degradation products of metribuzin in environmental samples

A capillary zone electrophoresis (CZE) method with UV-vis detection has been developed for the simultaneous monitoring of the major degradation products of metribuzin, i.e. deaminometribuzin (DA), deaminodiketometribuzin (DADK) and diketometribuzin (DK). The dissociation acid constants have also been estimated by CE and no significant differences have been observed with the values obtained by applying other techniques. Optimum separation has been achieved in less than 9 min in 40 mM sodium tetraborate buffer, pH 9.5 by applying a voltage of 15kV at 25 degrees C and using p-aminobenzoic acid as internal standard. In order to increase sensitivity, large volume sample stacking (LVSS) with polarity switching has been applied as on-line pre-concentration methodology. Detection limits of 10, 10 and 20 ng/mL for DA, DADK and DK, respectively were obtained. The method has been applied to soil samples, after pressurized liquid extraction (PLE). Samples were extracted at high temperature (103 degrees C and 1500 psi) using methanol as extraction solvent and sodium sulphate as drying agent. This PLE procedure was followed by an off-line pre-concentration and sample clean-up procedure by solid-phase extraction (SPE) using a LiChrolut EN sorbent column. These last two procedures were also suitable for the direct treatment of groundwater samples before CE analysis. The combination of both off-line and on-line pre-concentration procedures provided a significant improvement in sensitivity. LVSS provided pre-concentration factors of 4, 36 and 28 for DK, DA and DADK, respectively and with SPE a pre-concentration of 500-fold for the case of water samples and of 2.5-fold in the case of soil samples was obtained. The method is suitable for the monitoring of these residues in environmental samples with high sensitivity, precision and satisfactory recoveries.     

Oxidized multi-walled carbon nanotubes for the dispersive solid-phase extraction of quinolone antibiotics from water samples using capillary electrophoresis and large volume sample stacking with polarity switching

In this work, a new method for the determination of eleven quinolone antibiotics (moxifloxacin, lomefloxacin, danofloxacin, ciprofloxacin, levofloxacin, marbofloxacin, enrofloxacin, difloxacin, pefloxacin, oxolinic acid and flumequine) in different water samples using dispersive solid-phase extraction (dSPE) and capillary zone electrophoresis with diode-array detection was developed. Oxidized multi-walled carbon nanotubes (o-MWCNTs) were used for the first time as stationary phases for the off-line preconcentration by dSPE of the antibiotics. A 65 mM phosphate buffer at pH 8.5 was found adequate for analyte separation while large volume sample stacking with polarity switching of the analytes dissolved in water containing 10% (v/v) of acetonitrile was carried out in order to improve the sensitivity. dSPE parameters, such as sample volume and pH, o-MWCNT amount, volume and type of eluent in dSPE were optimized. Application of the developed method to the analysis of spiked Milli-Q, mineral, tap, and wastewater samples resulted in good recoveries values ranging from 62.3 to 116% with relative standard deviation values lower than 7.7% in all cases. Limits of detection were in the range of 28-94 ng/L. The proposed method is very fast, simple, repeatable, accurate and highly selective.     

Analysis of linear alkylbenzenesulfonates by capillary zone electrophoresis with large-volume sample stacking

A systematic investigation of optimal conditions for determining the homologues of linear alkylbenzenesulfonates (LAS) by capillary zone electrophoresis (CZE) using the large-volume sample stacking technique was presented. The most effective sample stacking and separation conditions was 20 mM borate buffer with 30% acetonitrile at pH 9.0, and the sample hydrodynamic injection of up to 90 s at 4 p.s.i. (1 p.s.i. = 6,892.86 Pa) (around 711 nl). Under such conditions, approximately a 100-fold enrichment factor was achieved based on peak heights. The reproducibility of migration time and quantitative results of stacking CZE can be improved by using internal standards. Quantitation limits of the homologues of LAS were 0.002-0.01 mg/l under these enrichment conditions. The analysis of real samples of laundry and dishwashing detergents was performed. The established high-performance liquid chromatography method was applied to evaluate the stacking CZE method, and compatible results were obtained.     

场放大样品堆积毛细管区带电泳检测尿液中苯丙胺类毒品

建立了毛细管区带电泳(CZE)中场放大样品堆积(FASS)技术分析尿液中苯丙胺类毒品的方法。采用体积分数30%甲醇的100 mmol/L磷酸盐(pH 3)为分离缓冲液,利用缓冲体系与样品溶液体系电导率的差异,在毛细管中浓缩样品组分,对苯丙胺、甲基苯丙胺、3,4-(亚甲二氧基)苯丙胺(MDA)、3,4-(亚甲二氧基)甲基苯丙胺(MDMA)4种毒品进行了分离和定量测定,与常规毛细管区带电泳比较,检测灵敏度提高约2000倍。采用利多卡因为内标,对添加上述4种毒品的尿液进行提取和测定,分析的相对标准偏差在15%范围之内,可检测到的上述毒品质量浓度为0.002μg/mL,相对回收率在70%~120%内。该方法可用于生物检材中苯丙胺类毒品的检测。     

Application of capillary zone electrophoresis with large-volume sample stacking to the sensitive determination of sulfonamides in meat and ground water

A CZE method with UV-Vis detection has been established and validated for the determination of nine sulfonamides: sulfapyridine, sulfamethazine, sulfamerazine, sulfamether, sulfadiazine, sulfadimethoxine, sulfamethoxazole, sulfachlorpyridazine, and sulfamethizole. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 45 mM sodium phosphate and 10% methanol at pH 7.3, with temperature and voltage of 27 degrees C and 25 kV, respectively. p-Aminobenzoic acid was used as an internal standard . Taking into account the lack of sensitivity of the UV-Vis detection, the application of an on-line preconcentration methodology, such as large-volume sample stacking with polarity switching has been proposed. This procedure combined with a solvent extraction/SPE method applied for off-line preconcentration and cleanup provides a significant improvement in the LODs, ranging from 2.59 to 22.95 mug/L for the studied compounds; the quantification of these residues being possible below the levels established by EU legislation in animal food products, such as meat. Satisfactory recoveries were also obtained in the analysis of these compounds in ground water.     

High sensitivity analysis of nitrite and nitrate in biological samples by capillary zone electrophoresis with transient isotachophoretic sample stacking

Tissue level of nitrate and nitrite are established indicators of altered nitric oxide metabolism under various pathological conditions. Determination of these anions in biological samples, in the presence of high chloride concentration, using capillary zone electrophoresis suffers from poor detection sensitivity. Separation conditions providing excellent resolution and submicromolar detection sensitivity of nitrate and nitrite have been developed and validated. Simple sample preparation was applied that maintains nitrite stability in tissue extracts and at the same time allows transient isotachophoresis stacking of the analytes. Nitrate and nitrite concentrations in rat brain and liver tissue samples were determined in control and lipopolysaccharide treated animals.     

Field-amplified on-line sample stacking for determination of carnosine-related peptides by capillary electrophoresis

An on-line sample stacking method, namely field-amplified sample injection, has been developed for the separation and determination of carnosine, anserine, and homocarnosine by capillary electrophoresis. Using electrokinetic injection, about 130- to 160-fold improvement of sensitivity was achieved without loss of separation efficiency when compared to conventional sample injection. For conventional injection, the samples were dissolved in running buffer and then hydrodynamically injected for 10 s (3.45 kPa). Various parameters affecting separation and sample stacking were optimized. Under optimum conditions, linear responses were obtained over two orders of magnitude and the detection limits (defined as S/N = 3) of carnosine, anserine, and homocarnosine were 1.5 x 10(-8) to 1.6 x 10(-8) mol/L.     

Multiresidue determination of sulfonamides in chicken meat by polymer monolith microextraction and capillary zone electrophoresis with field-amplified sample stacking

A method based on poly(methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction (PMME) and online preconcentration technique of field-amplified sample stacking (FASS) was proposed for sensitive capillary electrophoresis-ultraviolet (CE-UV) analysis of 12 sulfonamides (sulfamethazine, sulfamethoxypyridazine, sulfathiazole, sulfamerazine, sulfameter, sulfadoxine, sulfadimethoxine, sulfamonomethoxine sodium, sulfachlorpyridazine, sulfamethoxazole, sulfamethizole, and sulfisoxazole) in chicken samples. The conditions of PMME were optimized for the improvement of extraction efficiency and reduction of the matrix interferences from chicken sample. The best separation was achieved within 15min using a buffer of 100mM phosphate electrolyte (pH 7.3) with temperature and voltage of 20 degrees C and 25kV, respectively. By applying FASS, detection limits of 3.49-16.7ng/g were achieved with satisfactory precision (RSD<==13%) and recovery (96.3-104%) over a linear range of 50-1000ng/g for most analytes.     

Simultaneous separation and analysis of camptothecin alkaloids in real samples by large‐volume sample stacking in capillary electrophoresis

Large‐volume sample stacking (LVSS) is commonly used as an effective online preconcentration method in capillary zone electrophoresis (CZE). In this paper, the method LVSS combined with CZE has been proposed to analyze camptothecin alkaloids. Optimum separation can be achieved in the following conditions: pH 9.0; 25mm borate buffer containing 20 mm sulfobutylether‐β‐cyclodextrin and 20 mm ionic liquid 1‐ethyl‐3‐methyllimidazole l ‐lactate; applied voltage 20 kV; and capillary temperature 25 °C. The LVSS was optimized as hydrodynamic injection 4 s at 5.0 psi and the polarity switching time was 0.17 min. Under the above conditions, the analytes could be separated completely in <20 min and the detector response was increased compared with conventional hydrodynamic injection. The limits of detection were between 0.20 and 0.78 μg/L. A good linearity was obtained with correlation coefficients from 0.9991 to 0.9997. The recoveries ranged from 97.72 to 103.2% and the results demonstrated excellent accuracy. In terms of the migration time and peak area, the experiment was reproducible. The experimental results indicated that baseline separation can be obtained and this method is suitable for the quantitative determination of camptothecin alkaloids in real samples.     

Separation of alkylbenzyl quaternary ammonium compounds by capillary zone electrophoresis with sample stacking injection

Summary A systematic investigation of operational buffer systems, sample preparation and instrument parameters for achieving the best possible performance for determinating an homologous series of N-benzyl-N-alkyl-N,N-dimethylammonium chloride compounds by capillary zone electrophoresis with direct UV detection. The most effective separation was achieved within 3.5 min with the addition of acetonitrile (40%) in a phosphate buffer (20 mM pH 5.2) using a 40 cm fused-silica capillary operating at 25 KV and 20°C. Degassing of all electrolyte solutions and samples was very important. The linearity and repeatability for each compounds were satisfactory. To improve detection limits, on-column sample preconcentration, sample stacking, was investigated achieving a tenfold enrichment factor and quantitation limits about 10⁻⁷M.     

Large volume sample stacking capillary electrophoresis for metallothioneins analysis in eel liver

A large volume sample stacking procedure (LVSS) is developed here for metallothionein (MT) determinations in rabbit liver by using capillary electrophoresis with UV detection. A 10-time improvement in concentration-based LODs, when compared to the normal stacking mode (CE-UV analysis of samples solved in water), is achieved.The methodology is successfully applied to analysis of MTs in eel liver cytosolic extracts, preceded by an easy cleaning-up pre-treatment in order to eliminate the high salt content. Analysis of cytosol obtained from a group of eels previously exposed to Cd (induced group) resulted in several isoforms of MTs with differences in absorbance signal compared to a control group.     

Field-amplified on-line sample stacking for simultaneous enantioseparation and determination of some beta-blockers using capillary electrophoresis

A capillary electrophoresis method using carboxymethyl-beta-cyclodextrin as the chiral selector and mixture of methanol and ethanol as the organic additive was successfully developed for the simultaneous enantioseparation and determination of six beta-blockers, namely, carteolol, atenolol, sotalol, metoprolol, esmolol and propranolol in this paper. The most suitable running buffer for enantioseparation was found to be the solution of 20 mmol/L NaH(2)PO(4)-Na(2)HOP(4) (pH 5.5) containing 1.5% w/v carboxymethyl-beta-cyclodextrin, 5% v/v methanol and 5% v/v ethanol. Furthermore, field-amplified sample injection as an on-line sample stacking method was developed in order to increase the detection sensitivity. The experimental conditions for both simultaneous enantioseparation and the field-amplified sample injection method had been investigated in detail. Under the optimum conditions, the detection limits (defined as S/N=3) of this method were 0.01, 0.05, 0.05, 0.05, 0.05 and 0.5 microg /mL for (+/-) carteolol, (+/-) atenolol, (+/-) sotalol, (+/-) metoprolol, (+/-) esmolol and (+/-) propranolol, respectively, which were much lower than those of the conventional methods. The enhancement factors were greatly improved by 25-fold for the enantiomers of the beta-blockers except five-fold for (+/-) propranolol. Eventually, the proposed method has been applied for the analysis of human serum sample.     

Improving the sensitivity of the determination of ceftiofur by capillary electrophoresis in environmental water samples: in-line solid phase extraction and sample stacking techniques

This paper describes two different approaches for increasing the sensitivity for the analysis of ceftiofur by capillary electrophoresis (CE). Two different techniques based on the introduction of an enlarged volume of sample, namely large volume sample stacking (LVSS) and in-line solid phase extraction (SPE) were studied and compared. LVSS allowed the on-column electrophoretic preconcentration of ceftiofur without modification of the separation capillary. In-line SPE-CE was developed by using a home-made microcartridge that was filled with a reversed-phase sorbent (C₁₈). The microcartridge was coupled in-line near the inlet of the separation capillary. LVSS and in-line SPE-CE allowed automated operation and improved sensitivity for the analysis of ceftiofur with respect to conventional CE. When environmental water samples were analyzed, an additional pretreatment step based on off-line SPE was necessary in both cases to further decrease the detection limits. In terms of sensitivity for the determination of ceftiofur in river water samples, the combination of off-line SPE with in-line SPE-CE was found the most sensitive with a detection limit of 10 ng L⁻¹, whereas the method based on the use of off-line SPE with LVSS presented a detection limit of 100 ng L⁻¹.     

On-line sample concentration of organic anions in capillary zone electrophoresis by micelle to solvent stacking

Micelle to solvent stacking (MSS) is a new on-line sample concentration technique for charged analytes in capillary zone electrophoresis (CZE). Sample concentration in MSS mainly relies on the reversal in the effective electrophoretic mobility of the analyte at the boundary zone between the sample solution (S) and CZE background solution (BGS) inside the capillary. The basic condition for MSS is that the S is prepared in a matrix that contains an additive (i.e., micelles) which interacts with and has an opposite charge compared to the analytes. In addition, the BGS must contain a sufficient percentage of organic solvent. MSS was first reported for organic cations using anionic dodecyl sulfate micelles as additive in the S and methanol or acetonitrile as organic solvent in the BGS. Here, theoretical and experimental studies on MSS are described for organic anions using cationic cetyltrimethyl ammonium micelles as additive in the S and methanol as organic solvent in the BGS. Up to an order of magnitude improvement in concentration sensitivity was obtained for the test hypolipidaemic drugs using MSS in CZE with UV detection. The optimized method was also evaluated to the analysis of a spiked wastewater sample that was subjected to a simple extraction step.     

Improving sensitivity by large-volume sample stacking using the electroosmotic flow pump to analyze some nonsteroidal anti-inflammatory drugs by capillary electrophoresis in water samples

Large-volume sample stacking using the electroosmotic flow (EOF) pump (LVSEP) has been used to analyze some nonsteroidal anti-inflammatory drugs (NSAIDs) in water samples. With methanol as the run buffer solvent to suppress the EOF, sensitivity was enhanced by 80-100-fold. The sample for the analysis of real water sample was pretreated by solid-phase extraction (SPE). When the method was based on off-line SPE-LVSEP-CE, sensitivity improved by as much as 1000 times.     

Trace analysis of glyphosate in water by capillary electrophoresis on a chip with high sample volume loadability

A new method for the determination of trace glyphosate (GLYP), non-selective pesticide, by CZE with online ITP pre-treatment of drinking waters on a column-coupling (CC) chip has been developed. CC chip was equipped with two injection channels of 0.9 and 9.9 μL volumes, two separation channels of 9.3 μL total volume and a pair of conductivity detectors. A very effective ITP sample clean-up performed in the first channel at low pH (3.2) was introduced for quick CZE resolution and detection of GLYP carried out at higher pH (6.1) in the second channel on the CC chip. The LOD for GLYP was estimated at 2.5 μg/L (15 nmol/L) using a 9.9 |mL volume of the injection channel. ITP-CZE analyses of model and real samples have provided very favorable intra-day (0.1-1.2% RSD) and inter-day (2.9% RSD) repeatabilities of the migration time for GLYP while 0.2-6.9% RSD values were typical for the peak area data. Recoveries of GLYP in spiked drinking water varied in the range of 99-109%. A minimum pre-treatment of drinking water (degassing and dilution) and a short analysis time (ca. 10 min) were distinctive features of ITP-CZE determinations of GLYP on the CC chip with high sample volume loaded, as well.