Maximization of repeater spacing in ultrawide-wavelength-division multiplexing optical communication systems based on multipumped laser diodes

We show that the amplifier bandwidth can be further increased and the gain spectrum can be tailored if one uses pumping with multiple laser wavelengths. We consider the wide-gain amplifier where four sets of multipumps are employed. We process two multiplexing techniques in long haul transmission cables where the number of channels is up to 9600 in ultrawide-wavelength-division multiplexing (UWWDM) with employment of the ultrawide-space-division multiplexing (UW-SDM) technique to merge the number of links up to 400 in the optical-fiber core over wide ranges of affecting sets of parameters. As well as the repeater spacing using a multi-pumping Raman amplifier, we investigate N _R pumps in the optical pumping wavelength (from 1.36 to 1.44 μm) to amplify optical channels where the optical wavelength range (1.45–1.65 μm) satisfies near infrared optical transmission region.     

基于光纤光栅波长路由的光纤自愈网

介绍了一种基于光纤光栅波长路由的全光双纤单向自愈环网,环内四节点具有16×10Gbit/s的传输能力。利用啁啾光纤光栅(CFBG)的波长可选择特性,实现了分布式的上下话路和波长选择功能,同时有效地补偿了传输色散。网络管理参照了网络管理协议(SNMP)的网络管理模型,通过对网络的重要参数进行实时监测来控制网络运行。实验结果表明,当环上任一处光缆发生故障时,通信业务能够自动恢复,恢复时间小于50ms,可实现网络的快速自愈,符合ITU-T G.841的建议规定。     

Laser-based volumetric colour-coded three-dimensional particle velocimetry

We present a method of three-dimensional particle velocimetry with a single digital colour camera using multiple colour illumination to encode image depth over a large volume. A copper vapour laser operating at 511 nm is used to pump an optical fibre producing a multiple-wavelength beam via multiple order stimulated Raman scattering. The beam is dispersed and formed into a stack of thin sheets to illuminate a volume of space. The spatial co-ordinates of particles imaged within the illuminated volume are obtained from their imaged x,y positions with depth discerned from particle hue (set by the wavelength of illumination). The method exhibits an RMS depth error of 3% in relation to the thickness of the illuminated region. This paper reports a proof-of-principle of three-dimensional particle imaging using a multi-wavelength laser source with a view to 3D-3C particle velocimetry.     

Effects of F2 Color Center Spatial Distribution on the Emission Properties of Optical Microcavities Based on LiF Films

Highly stable F₂ color centers are very efficiently produced in lithium fluoride (LiF) by electron beam irradiation at room temperature. We have fabricated optical microcavities in which the active medium is a low-energy electron beam irradiated LiF film, whose optical thickness is comparable with the peak wavelength (～668nm) of the F₂ broad photoluminescence band. By selecting the proper electron beam energy, one can control the F₂ color center depth distribution. This distribution influences the photoemission angular distribution of the microcavity, whose resonance properties are determined by the coupling of the depth profile of the defects with the pump electromagnetic field and microcavity modes.     

Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications

Sputter deposited TiAlN/TiAlON/Si₃N₄ tandem absorber has been characterized by spectroscopic ellipsometry in the wavelength range of 450-1200 nm. Each layer of the tandem absorber viz., TiAlN, TiAlON and Si₃N₄ has been deposited separately on copper substrate (Cu) and ellipsometric measurements have been carried out on each of these layers. The measured ellipsometric spectra were fitted with theoretically simulated spectra and the sample structure and wavelength dispersion of optical constants of each layers have been determined. The ellipsometric measurements have also been carried out on the three-layer tandem absorber deposited on Cu substrate. By analyzing the ellipsometric data, depth profiling of the tandem absorber has been carried out using the derived optical constants of the individual layers.     

Passive mode-locking of a diode-pumped Tm:GdLiF4 laser

We propose an optical near-field assisted sputtering method for repairing scratches on the surface of polycrystalline ceramics in a self-assembling manner. An Al₂O₃ source was sputtered on substrates with laser radiation of wavelength 473 nm. The average depth of the scratched grooves on polycrystalline Al₂O₃ ceramic substrate decreased from 3.2 nm to 0.79 nm. Using a Hough transform, we also confirmed the selective repair of scratches.     

用太阳光谱测量空气中NO2浓度的方法研究

根据Noxon方法,利用NO₂在430—450nm范围内的吸收特性,测量空气中NO ₂的浓度.介绍了一种利用光学差分吸收原理,以太阳光为光源,二极管阵列为探测器 ,黄山光明顶上的太阳光谱为参考光谱测量大气中NO₂浓度的新光学方法. 关键词： 太阳光谱 2垂直柱体密度')" href="#">NO₂垂直柱体密度 定日镜 环境空气质量监测     

Investigation on optical transmission spectra of (1−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 single crystals

The optical transmission spectra from 0.3 to 11 μm of relaxor ferroelectric single crystals (1−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (PMN-xPT) were systematically studied at room temperature in this paper. The crystal is transparent between 0.45 and 5.5 μm and becomes completely absorbing around 0.4 μm in near UV region and 10 μm in infrared region. But the wavelength cutoff in near UV is much sharper than the long wavelength cutoff. As compared with other configurations, tetragonal single crystals possess the optimal transmission properties. The optical transmittance in the wavelength region from 0.45 to 5.5 μm is about 70%. The results show that tetragonal PMN-xPT single crystals are promising for a wide range of optical applications. Some discussions about the oxygen-octahedra structure that determines the basic energy level of the crystals are also presented on the optical properties of PMN-xPT single crystals.     

Magnetic characterization of surface-hardened steel

Case depth measurements of surface-hardened steel parts are important for quality control. Here, the magnetic properties of two sets of carefully characterized 25-mm-diameter case-hardened steel rods were studied with the aim of developing new methods to evaluate the case depth nondestructively. Induction-hardened 4140 steel and carburized 8620 steel rods were studied. Each set contained control samples (heat-treated but not surface-hardened) and samples hardened to three different nominal depths. After fabrication, the microhardness profiles of the rods were measured and the data analyzed to obtain the mid-hardness depth in each case. These measurements were compared with optical micrographs that reveal the microstructure of the samples as a function of depth below the surface.By the analysis of measured magnetization curves and hysteresis loops, the differential permeability and saturation magnetization of the rods were extracted. It was found that differential permeability increases with increasing case depth at a certain strength of the applied field (1350-1450 A/m) for both hardening mechanisms, but only significantly for induction-hardened rods. Saturation magnetization M_s was evaluated using the ‘law of approach’ and was observed to decrease as the depth of case hardening increases, for both induction-hardened and carburized steel rods. The observed behavior is described adequately by a simple model in which M_s for the rod is represented as a volume-weighted sum of saturation magnetization values in the core and in the surface layer.     

Using broadband absorption spectroscopy to measure concentration of sulfur dioxide

A linear relationship between concentration of sulfur dioxide (SO₂) and optical parameter (OP) is established using the Beer–Lambert law. The SO₂ measuring system is set up to measure the concentration of sulfur dioxide in the wavelength range 275–315 nm. Experimental results indicate that the detection limit of the sulfur dioxide measuring system is below 0.2 ppm per meter of path length, and the measurement precision is better than ±1%. The proposed SO₂ measuring method features limited interference from other gases and dust, and high stability and short response time.     

Investigation of intermodal interference of LP01 and LP11 modes in the liquid-core optical fiber for temperature measurements

The intermodal interference of the LP₀₁ and LP₁₁ modes and determination of the equalization wavelength in the liquid-core optical fiber is presented. Theoretically was described the weakly guiding optical fiber with the constant core radius, where equalization wavelength is a function of the refractive indices of core and cladding. The dependence of equalization wavelength on refractive indices is employed for measurement of temperature. Temperature sensitivity using intermodal interference of modes LP₀₁ and LP₁₁ was documented in the liquid-core optical fiber consisted of fused silica as cladding and medicinal oil as a core. In the investigated temperature range the intermodal interference allows the temperature measurement with resolution of about 0.02 °C.     

On the Optical Properties of Thin‐Film Vanadium Dioxide from the Visible to the Far Infrared

The insulator‐to‐metal transition (IMT) in vanadium dioxide (VO₂) can enable a variety of optics applications, including switching and modulation, optical limiting, and tuning of optical resonators. Despite the widespread interest in VO₂ for optics, the wavelength‐dependent optical properties across its IMT are scattered throughout the literature, are sometimes contradictory, and are not available at all in some wavelength regions. Here, the complex refractive index of VO₂ thin films across the IMT is characterized for free‐space wavelengths from 300 nm to 30 µm, using broadband spectroscopic ellipsometry, reflection spectroscopy, and the application of effective‐medium theory. VO₂ films of different thicknesses are studied, on two different substrates (silicon and sapphire), and grown using different synthesis methods (sputtering and sol–gel). While there are differences in the optical properties of VO₂ synthesized under different conditions, these differences are surprisingly small in the ≈2–11 µm range where the insulating phase of VO₂ also has relatively low optical loss. It is anticipated that the refractive‐index datasets from this article will be broadly useful for modeling and design of VO₂‐based optical and optoelectronic components, especially in the mid‐wave and long‐wave infrared.     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。     

Microstructuring of Si(100) by light induced dry etching in the VUV

Light-induced dry etching of Si(100) in the VUV range using synchrotron radiation (SR) and a halogen-containing gas (XeF₂) has been investigated with respect to selectivity, anisotropy, quantum efficiency, optimal wavelength, spatial resolution and quality of the photochemical etching processes. Microstructuring of Si with XeF₂can be optimized to achieve etched structures in the sub-micrometre range by increasing the contrast in choosing a wavelength with minimal unselective etching. The strength of unselective etching is strongly wavelength dependent and follows the XeF₂gas phase absorption coefficient. Fragments from dissociation of the XeF₂reach the Si surface and thus cause unselective etching. Optimal dry etching occurs for wavelengths around 120 nm because the selectivity is high due to an excitation of a surface layer and also the quantum efficiency is very large. An efficiency of 10 removed Si atoms per incoming photon, which exceeds that in the visible spectral range by more than four orders of magnitude, combined with the higher spatial resolution at 120 nm compared to the conventional excimer laser and I-line wavelengths and the availability of optical materials for imaging present a perspective for generating line densities in the Gbit range.     

GeS2-Ga2S3-CsCl玻璃的三阶非线性光学性能研究

用传统的熔融急冷法制备了组分为(100-2x) GeS₂-xGa₂S₃-xCsCl (x= 15, 20, 25 mol%)系列硫卤玻璃, 测试了样品玻璃的吸收光谱. 采用Z-扫描方法测试了样品的三阶非线性光学特性. 分析了激光光子能量与玻璃三阶非线性光学特性的关系,并研究了组分变化对玻璃的三阶非线性性能的影响. 研究结果表明,光子能量的少许改变可以使非线性吸收系数在一个较大的范围内变化,随着光子能量的增大, 玻璃的非线性吸收系数β 增大;当光子能量趋近于0.5E_g时, β值趋近于0,玻璃有最佳的品质因子; 玻璃样品中CsCl含量的增加使得玻璃的光学带隙E_g增大,短波截止边蓝移,非线性吸收系数β 减小. 但是由于结构与带隙对光学非线性的影响相反,非线性折射率γ 值变化不大. 该结果表明样品的光学非线性性能由光学带隙和结构两方面因素共同决定,对今后研究全光开关用硫系玻璃具有一定的指导意义和参考价值.     

Modeling of optimal conditions for oxyhemoglobin photodissociation in laser-irradiated biotissue

Based on the theory of radiation transfer and a model that describes the structure and optical properties of biotissues, we have found spectral conditions of irradiation of the skin surface that ensure efficient generation of molecular oxygen O₂ in the dermis due to the photodissociation of blood oxyhemoglobin. We show that, for maximal local O₂ formation at depths z ≤ 0.2 mm, 0.2 mm < z ≤ 0.9 mm, 0.9 mm < z ≤ 2.5 mm, and z > 2.5 mm, it is more effective to use wavelengths in the intervals 418 ± 5, 575 ± 5, 585 ± 5, and 600 ± 5 nm, respectively. Physical reasons for the shift of optimal wavelengths toward the red range of the spectrum are described. We show that they are based on the selectivity of optical properties of the skin biotissue, which acts as of a kind of spectral filter the transmission curve of which depends on the depth. It is found that irradiation at a wavelength near 575 nm is optimal for the generation of a maximal amount of O₂ in the intire bulk of the dermis.     

Optimal sizes of silica microspheres for linear and nonlinear optical interactions

We investigate theoretically the mode volume (V_eff) and quality factor (Q) of the fundamental whispering gallery mode of a silica microsphere. We determine the optimal sizes of microspheres for linear and nonlinear optical interactions. We find for the latter case that an optimal wavelength exists that corresponds to the low-loss range for silica. For linear optical interactions, the optimal size is found to be relatively insensitive to the choice of wavelength. PACS 42.60.Da     

连续偏振光谱的稻种发芽率检测方法研究

针对目前传统稻种发芽率检测方法周期长、精度低的问题,提出新颖的基于连续偏振光谱技术实现稻种发芽率快速、无损检测的方法。以不同老化天数稻种为检测目标,10 min为检测时间点,使用起偏器将光纤准直光源调制成线偏振光垂直入射稻种浸出液,而后以5°为间隔旋转检偏器,并通过光纤光谱仪检测透射的光谱,对检测的偏振光谱通过归一化预处理后,根据不同发芽率稻种检测时偏振角及波长的贡献给出特征偏振角和特征波长,特征偏振角为0°,5°和25°,特征波长为576,620和788 nm,将获取的连续偏振光谱以特征偏振角和特征波长处的透射率为输入,构建稻种发芽率检测模型。分别比较运用偏最小二乘法回归(partial least squares regression,PLSR)、BP神经网络(back propagation neural network,BPNN)、径向基神经网络(radial basis function neural network,RBFNN)三种建模方法建立稻种发芽率检测模型。分别用老化天数为0,2,4,6 d的稻种,在不同的偏振角共测量1 520组实验数据,其中912组数据作为校正集,608组数据作为预测集,建模结果表明三种模型预测精度较高,其中RBFNN模型预测精度最高,其相关系数r为0.976,均方误差RMSE为0.785,平均相对误差MRE为0.85%。表明利用连续偏振光谱技术通过多维度光谱信息能够有效实现稻种发芽率的快速、准确检测。     

Determination of the concentration of aerosol particles in a vertical atmospheric column from satellite measurements of the spectral optical depth

We propose a method for fast retrieval of the inhalable particle concentration (PM_2.5 and PM₁₀) in a vertical atmospheric column from satellite measurements of the aerosol optical depth (AOD) without using a priori assumptions concerning the refractive index and the aerosol particle size distribution function. The method is based on a polynomial regression between PM_2.5, PM₁₀, and AOD at the wavelengths 466 nm and 644 nm, established from AERONET data. We have studied the sensitivity of the method to errors in the optical measurements and have estimated the errors in retrieval of PM_2.5 and PM₁₀ for different atmospheric situations. We carry out parametrization of the regressions on the value of the integrated air moisture content.     

Formation of periodic structures by the space-selective precipitation of Ge nanoparticles in channel waveguides

Thermally stabilized channel waveguides with Bragg gratings were fabricated by the space-selective precipitation technique of crystalline Ge nanoparticles using KrF excimer laser irradiation. The periodic structures consisting of Ge nanoparticles were formed in Ge-B-SiO₂ thin glass films after exposure to an interference pattern of the laser followed by annealing at 600 °C. The channel waveguides with the periodic structures were fabricated by the cladding of the patterned Cr layers on the films. The diffraction peak for the TE-like mode of 11.8 dB depth was observed clearly at a wavelength of 1526.4 nm, indicating that the periodic structure also served as the optical band-pass filter in optical communication wavelength. The spectral shape, diffraction efficiency, and diffraction wavelength remained unchanged even after annealing at 400 °C. Furthermore, a low temperature dependence of the diffraction wavelength - as low as 8.1 pm/°C - was achieved. The diffraction efficiency was further enhanced after subsequent annealing at 600 °C. The space-selective precipitation technique is expected to be useful for the fabrication of highly reliable optical filters or durable sensing devices operating at high temperature.