利用棱镜减小自衍射信号光角色散的研究

自衍射效应在飞秒激光领域有非常重要的应用,如提高飞秒脉冲的时域对比度、作为自参考光谱干涉脉冲测量法的参考光、作为频率分辨光学开关法的信号光等.然而,具有较宽光谱带宽的飞秒激光在自衍射效应过程中产生的信号光存在明显的角色散,这给自衍射效应的应用带来不利影响.本文研究发现通过在自衍射效应的一个光路中加入等腰直角棱镜,当到棱镜的入射角为23fi时可以明显地减小飞秒激光脉冲自衍射信号的角色散.这就为以后将自衍射效应更好的应用到飞秒激光脉冲的研究提供了有用的参考.     

不同偏振飞秒激光经块状材料传输后的脉宽压缩

实验研究了线偏振和圆偏振状态下的飞秒强激光脉冲在块状材料中的传输过程。不同偏振的激光脉冲在传输过程中得到了不同程度的光谱展宽,经色散补偿后,脉冲时域宽度均得到了压缩。详细分析了压缩脉冲的脉宽以及啁啾情况与入射激光脉冲能量之间的关系,比较了飞秒激光在线偏振及圆偏振情况下的不同压缩效果。在线偏振入射光情况下得到了最短21fs的压缩脉冲宽度,在圆偏振情况下得到的最短脉冲宽度为22fs。实验结果表明,这种光谱展宽与色散补偿方式对圆偏振光同样适用,而且圆偏振的入射激光将更有利于对更高能量的脉冲进行压缩。在色散补偿量相同的情况下,压缩效果随入射脉冲能量变化的规律符合理论估计。     

高强度飞秒激光脉冲在空气中的自压缩

利用高重复频率（1kHz）、吉瓦级飞秒激光脉冲实验验证了高强度飞秒脉冲在空气中的自 压缩现象，研究了入射脉冲在不同初始啁啾情况下经空气中聚焦成丝后，时域及频域特性随 入射脉冲能量的变化规律.实验结果表明，在无需后继色散补偿情况下，高强度飞秒脉冲仅 通过在空气中的非线性传输过程就可以实现脉冲压缩；在入射脉冲为负啁啾情况下，实验观 察到脉冲光谱及时域宽度同时得到压缩，并可获得比激光源所能提供的更短的近双曲正割型 变换限脉冲. 关键词： 高强度飞秒激光脉冲 自压缩 自聚焦     

C. 超短激光光源

本文对超短激光脉冲的产生、压缩技术的最新发展做了详细评述。     

基于多光子脉冲内干涉相位扫描法对飞秒激光脉冲进行相位测量和补偿的研究

研制了一套基于多光子脉冲内干涉相位扫描方法的可以同时对飞秒激光脉冲进行相位测量和补偿的实验系统装置.实验中,通过自主研发的LabVIEW程序控制液晶空间光调制器和光纤光谱仪,对待测飞秒激光脉冲施加相位扫描,并同时记录受到调制的飞秒激光脉冲的倍频光谱,得到了多光子脉冲内干涉相位扫描(MIIPS)轨迹图.通过MIIPS轨迹图的三次测量和迭代运算,还原出了经过预先啁啾调制的中心波长约为810 nm、重复频率为1 kHz的飞秒激光脉冲的光谱相位,测量精度在0.1 rad以内.根据测量结果,利用液晶空间光调制器对该飞秒激光脉冲进行相位补偿,得到了近似傅里叶变换极限的飞秒激光脉冲.这一装置将在多光子显微成像、脉冲整形、飞秒激光光谱学等众多领域发挥重要作用.     

Spatiotemporal control of ultrashort optical pulses by refractive-diffractive-dispersive structured optical elements

Structured optical elements that control the spatial and temporal characteristics of femtosecond light pulses are analyzed and synthesized. We show that unique spatiotemporal effects can be attained based on the diffraction, refraction, and dispersive effects that appear in the femtosecond regime. We argue that the design requirements for ultrafast optics are beyond the achromatization considerations that are usually applied to incoherent illumination because of the need to consider coherent effects. Despite fundamental limitations in the space-time control of ultrashort pulses, we show the potential of this technique to improve simultaneously the spatial and the temporal resolution of a lens and to generate ultrafast pulse sequences.     

Femtosecond time-resolved optical polarigraphy: imaging of the propagation dynamics of intense light in a medium

A time-resolved imaging technique for visualizing ultrafast propagation dynamics of intense light pulses in a medium has been demonstrated. The method probes the instantaneous birefringence induced by a pulse in the medium. Through consecutive femtosecond snapshot images of intense femtosecond laser pulses propagating in air, ultrafast temporal changes in the two-dimensional spatial distribution of the optical pulse intensity were clearly seen.     

基于交叉偏振波产生的脉冲净化技术研究与应用

本文利用交叉偏振波产生技术(XPW)对800 nm波段钛宝石飞秒激光器输出的激光脉冲进行时域净化, 提高脉冲时域对比度, 并测量验证了10¹¹对比度的脉冲, 达到测量仪器的动态范围极限, 比初始脉冲时域对比度有三个量级的提高, XPW的效率为22%. 同时发现净化后脉冲光谱宽度也得到一定展宽, 进一步利用啁啾镜对和补偿片对净化后的脉冲进行色散补偿, 得到25 fs脉宽的脉冲. 利用该净化后的激光脉冲作为种子注入已有的太瓦级钛宝石啁啾脉冲放大系统中, 在输出脉冲能量250 mJ, 宽度50 fs, 对应峰值功率5 TW的情况下, 在主脉冲前100 ps以外的范围内测量验证了10¹¹的脉冲对比度.     

Programmable shaping of a subterawatt, femtosecond laser pulse by modulating the spectral phase of the preamplified pulse

Shaping the temporal profile of subterawatt optical pulses with a femtosecond duration is demonstrated with the help of a programmable pulse shaper, which is based on a liquid–crystal spatial light modulator. For safe operation, we place the pulse shaper between regenerative and multipass amplifiers. We generate double pulses, whose respective component pulses have 0.27-TW peak power and 74-fs duration. The possibility of variously-shaped multiterawatt pulses is also discussed.     

Diffraction-based femtosecond pulse shaping with a two-dimensional spatial light modulator

A new diffraction-based method is proposed and demonstrated for simultaneous shaping of both the phase and amplitude of femtosecond laser pulses by use of a phase-only two-dimensional spatial light modulator. The method suppresses certain types of temporal replica features ordinarily observed in femtosecond pulse shaping owing to imperfections in modulator devices and allows for multiplexed outputs suitable for use in various applications.     

Ultrafast thulium-doped fiber-oscillator with pulse energy of 4.3 nJ

A femtosecond fiber laser based on thulium-doped double-clad silica fiber with an internal dispersion compensation is presented that generates pulses at a center wavelength of 1976 nm with an energy of 4.3 nJ and a duration of 1.2 ps. The dechirped pulse duration is 294 fs. The pulse energy is more than 2 orders of magnitude above the pulse energy demonstrated previously. Mode locking is achieved using additive pulse mode locking, and dispersion compensation is facilitated by a grating stretcher arrangement.     

声光偏转器扫描飞秒激光的时间色散补偿

研究了声光偏转器(AOD)扫描飞秒激光的时间色散效应及补偿方案.在800nm波长处，单个AOD引入的群延时色散(GDD)可达～9300fs².在深入分析AOD和棱镜角色散原理的基础上，提出了用色散棱镜预补偿AOD对飞秒脉冲的时间色散，并进行了实验证实.在AOD中心频率处(70MHz)，将398fs的脉冲压缩到122fs，且整个带宽范围内(50MHz—90MHz)脉宽变化范围为120fs—180fs.这表明该方案用于AOD扫描飞秒激光时进行时间色散补偿是非常有效的. 关键词： 飞秒激光 声光偏转器 时间色散 脉冲压缩     

反射式棱栅对展宽器用于啁啾脉冲放大激光的研究

在啁啾脉冲放大(CPA)系统中, 脉冲的展宽是实现安全有效放大的重要保证. 本文介绍了一种新型的由色散棱镜与光栅组合而成的反射式棱栅对展宽器. 并利用光线追迹法对色散进行了数值模拟, 测量实验结果验证了理论计算的正确性. 在此基础上, 分析了以棱栅对为展宽器和ZF7玻璃材料为压缩器的下啁啾(down-chirped)脉冲放大系统中的色散比较传统的上啁啾脉冲放大系统, 结果表明棱栅对可以同时提供负的二阶色散和三阶色散, 这样能更好地补偿放大器中材料的高阶色散, 从而获得近傅里叶变换极限的压缩脉冲. 此外以块材料作为压缩器不仅提高了传输效率, 而且简化了实验装置, 增强了系统的稳定性. 这样的展宽压缩组合在高重复频率的飞秒啁啾脉冲放大系统中具有明显优势. 关键词： 反射式棱栅对 啁啾脉冲放大 色散 飞秒脉冲     

利用飞秒脉冲光谱全息实现空域信息向时域信息的转换

在Mazurenko提出的时域超短脉冲光谱全息结构的基础上,提出了改进型的飞秒脉冲光谱全息结构,并推导了当输入脉冲光场中包含时、空分布时光谱全息的记录和再现。结果发现当在光谱全息记录和再现时,如果频谱面上添加空间滤波器,可以实现飞秒脉冲包含的空域信息向时域信息的转换。结论可以应用到超短脉冲整形,超高速光通信和光信息处理等领域。     

Dispersion and compensation of temporal pulse width for femtosecond pulse laser ranging

We built an atmosphere dispersion model of femtosecond laser pulses that can calculate temporal pulse width travelling in air. The initial pulse duration of 100 fs can be broadened to 60 ps when propagating 200 km in the atmosphere. An experimental system has been established to compensate the large dispersion propagating 200 km in the atmosphere. The single model fiber (SMF) and the prism pairs were, respectively, used for coarse and fine compensation in the system. The pulse duration was consistently regulated 150 fs by moving the distance of prism pairs. This method can reach submicron resolution for a long distance by means of time of flight measurement.     

高能飞秒激光系统中空间滤波器的研究和设计

 由于透镜传输时间延迟效应（PTD），飞秒激光脉冲经过空间滤波器产生脉冲波前变形。讨论了用双胶合透镜或双分离透镜代替空间滤波器中的单透镜，以消除或减小PTD效应，设计了适用于飞秒激光装置的空间滤波器。     

Modeling of dynamics of a femtosecond Kerr-lens mode-locked laser by the mode decomposition of the intracavity beam

A full spatio-temporal model is used for analyzing the features of generation of femtosecond pulses in a Kerr-lens mode-locked laser. The developed algorithm involves the field decomposition in terms of Laguerre-Gaussian functions which are the modes of empty space. Polarization of the medium is calculated from the Bloch equations for the two-level transition. With allowance for the frequency-dependent diffraction, such a method allows us to describe generation of pulses with a duration of several femtoseconds. It is shown that diffraction results in a shift of the carrier frequency of sub-10-fs pulses toward shorter wavelengths. A multiple-pulse oscillation regime can be realized near zero group-velocity dispersion in the cavity. It is shown that such a regime can be realized in the absence of higher-order dispersion. Strong coupling between the spatial and temporal characteristics of the field is observed for the pulses with a duration of several femtoseconds. This leads to a complicated dependence of the beam size on its power and, therefore, to a complicated variation in power-dependent losses. Due to this feature, regimes of generation of ultrashort pulses cannot be correctly described by models in which power-dependent losses are introduced artificially.     

Efficient reflection grisms for pulse compression and dispersion compensation of femtosecond pulses

Efficient reflection grisms for pulse-compression and material-dispersion compensation have been designed and demonstrated in a 40 fs, 300 microJ, 5 kHz downchirped pulse amplification system for the first time to our knowledge. A grism design for 800 nm femtosecond laser pulse dispersion compensation applications is realized by using standard, commercial diffraction gratings.     

High-power diode-pumped Yb3+:CaF2 femtosecond laser

We report what is believed to be the first demonstration of a high-power passively mode-locked diode-pumped femtosecond laser based on an Yb3+:CaF2 single crystal, directly pumped by a 15-W fiber-coupled laser diode. With a 5-at. % Yb3+ -doped sample and prisms for dispersion compensation we obtained pulses as short as 150 fs, with 880 mW of average power and up to 1.4-W average output power, with a pulse duration of 220 fs, centered at 1049 nm. The laser wavelength could be tuned from 1040 to 1053 nm in the femtosecond regime. Using chirped mirrors for dispersion compensation, the oscillator provided up to 1.74 W of average power, with a pulse duration of 230 fs, corresponding to a pulse energy of 20 nJ and a peak power of 85 kW.     

Spatio-temporal evolution scenarios of femtosecond laser pulse filamentation in fused silica

We investigated the evolution of femtosecond laser pulses at different wavelengths corresponding to normal, zero, and anomalous regimes of group velocity dispersion (GVD) in fused silica. The laser pulse filamentation in different GVD regimes under the same similarity parameters was first considered. It was established numerically that the scenario of the pulse filamentation depends both on temporal factors, which are determined by pulse GVD and self-phase modulation, and spatial factors associated with Kerr self-focusing and plasma defocusing. In presence of strong normal GVD the dispersive stretching causes, a pulse power decrease followed by lowering of the intensity in filament, electron density reduction in plasma channel, and suppressing of the refocusing. For zero GVD the multipeak regime of radiation propagation is realized in the filament as a result of recurring self-focusings of powerful pulse tail, which was defocused in laser plasma. When GVD is anomalous a sequence of ??light bullets?? with duration about 10 fs forms in the filament. And the peak intensity in ??light bullet?? stays the same ?? 5 × 10¹³ W/cm². In the regime of anomalous GVD power is transferred from the pulse edges to its center, where the repeated self-focusings occur and form a ??light bullet?? sequence.