Crystallization and glass transition kinetics in Cu ion substituted Cux-Ag1 − xI-Ag2O-V2O5 superionic glasses

Crystallization kinetics and thermal properties in superionic glasses Cu_xAg_1 − xI-Ag₂O-V₂O₅ for x = 0.1-0.3 have been thoroughly investigated. X-ray diffraction and differential scanning calorimetry measurements confirm the precipitation of at least three compounds during crystallization, viz. AgI, Ag₄V₂O₇ and Ag₈I₄V₂O₇. The activation energies for structural relaxation (E_s) and crystallization (E_c) obtained using Moynihan and Kissinger formulation exhibit interesting trends with CuI substitution. The E_s value decreases with CuI substitution in the system. Further, the E_c values corresponding to precipitation of Ag₄V₂O₇ and Ag₈I₄V₂O₇ exhibit increasing trend, whereas, for that of AgI precipitation a decreasing trend with CuI content. The Avrami parameter calculated from Augis-Bennett method and Ozawa equation suggests predominantly surface crystallization in the glassy system. The electrical conductivity-temperature (σ-T) cycles interestingly demonstrate increasing precipitation of AgI with CuI content in the glass matrix.     

Effect of BaO content on the sintering and physical properties of BaO-B2O3-SiO2 glasses

A BaO-B₂O₃-SiO₂ glass system was chosen as a candidate composition for the application to Pb-free low temperature sinterable glass. The effect of BaO content on the crystallization, sintering behavior, and properties of the glasses was examined. Both the glass transition temperature and crystallization temperature decreased as the BaO content increased. Crystallization easily occurred during sintering with a BaO content of more than 50 mol%, which effectively inhibited the over-firing phenomenon. The dielectric characteristics and thermal expansion coefficient of the glasses were examined and the results were explained on the basis of the crystallization and densification of the specimens.     

Crystallization processes of Li2O-Ga2O3-SiO2-NiO system glasses

Crystallization processes of Li₂O-Ga₂O₃-SiO₂-NiO system glasses have been studied by X-ray diffraction, differential calorimetry and optical absorption. Transparent glass-ceramic containing LiGa₅O₈:Ni²⁺ as the sole crystalline phase has been obtained from glass with the composition of 13Li₂O-23Ga₂O₃-64SiO₂-0.1NiO (in mol%) by the heat treatment in the temperature range from 923 to 953 K. It was revealed that the specific surface area of samples enhances crystallization of LiGaSi₂O₆ but obstructed that of LiGa₅O₈. LiGa₅O₈ grew to nano-sized crystallites dispersed in the glass matrices and did not affect the transparency seriously. In contrast, LiGaSi₂O₆ grew to crystallites with diameters more than 100 nm on the surface and made the glasses opaque. Optical absorption measurements revealed that doped Ni²⁺ occupied five-folded trigonal bipyramidal sites in the as-quenched glass matrices but six-folded octahedral sites of precipitated LiGa₅O₈ in the glass-ceramics. It was confirmed that transparent glass-ceramic containing Ni²⁺:LiGa₅O₈ was effectively obtained by the heat treatment at a temperature of 953 K for 10 h.     

Direct observations of pseudo-binary NdBa2Cu3Ox–Ba3Cu10O13 phase diagram and NdBa2Cu3Ox crystallization under reduced oxygen atmosphere

The pseudo-binary NdBa₂Cu₃O_x–Ba₃Cu₁₀O₁₃ phase diagrams and the crystallization of NdBa₂Cu₃O_x have been in situ observed using high-temperature optical microscope under three different oxygen atmospheres namely 1%, 0.1% and 0.0097% oxygen in argon. It has been observed that the liquidus line becomes narrower both in composition and temperature with decreasing oxygen pressure. This result suggested that under reduced oxygen atmosphere, the NdBa₂Cu₃O_x crystals could only be grown from a peritectic melt consisting of Nd₄Ba₂Cu₂O₁₀ and liquid. The crystallization temperature of NdBa₂Cu₃O_x was found to decrease logarithmically with decreasing oxygen content in the atmosphere.     

DC conduvtivity of V2O5TeO2 glasses

The dc conductivity of semiconducting vanadium tellurite glasses of compositions in the range 50 to 80 mol% V₂O₅ has been measured in the temperature region 77 to 400 K. Measurements have been made on annealed samples at different annealing temperatures. Annealing the samples at temperature of about 250°C causes the appearance of a complex crystalline phase resulting in an increase of conductivity. Results are reported for amorphous samples of different compositions. The conductivity of tellurite glasses is slightly higher than the corresponding composition of phosphate glasses, but the general trend of the increase of conductivity and decrease of high temperature activation energy with increasing V₂O₅ content is similar in the two systems. The data have been analysed in the light of existing models of polaronic hopping conduction. A definite conclusion about the mechanics of conduction (adiabatic or nonadiabatic) is difficult in the absence of a precise knowledge of the characteristic phonon frequency v₀. Adiabatic hopping is indicated for v₀～10¹¹ Hz, however this value leads to unreasonably low value for the Debye temperature θ_D, and higher values for v₀～10¹³ hz satifiies the conditions for nonadiabatic hopping which appears to be the likely mechanism of conduction in V₂O₅TeO₂ glasses. The low temperature data (< 100 K) can be fitted to Mott's variable range hopping, which when combined with ac conductivity data gives reasonable values of α, but a high value for the disorder energy.     

Gel-glass transformation in the SiO2Fe2O3 system

Gel-glass transformation has been studied by Mössbauer spectroscopy, DTA-TG analyses and X-ray diffractometry for four compositions in the SiO₂Fe₂O₃ system (A: 5 wt% Fe₂O₃, B: 10 wt% Fe₂O₃, C: 20 wt% Fe₂O₃, D: 40 wt% Fe₂O₃).The gels were prepared by the hydrolysis of silicon tetraethoxide and iron triethoxide and successively dried and heated in oxygen in the temperature range 40–1000°C.Samples A and B gave typical amorphous X-ray patterns up to 700°C; heating at higher temperature yielded the precipitation of quartz, cristobalite and hematite in sample A, cristobalite and hematite in sample B. Crystallization was also detected by DTA in sample A for which X-ray diffraction exhibited a larger effect.In samples C and D crystallization took place starting from 300°C with the precipitation of hematite, which remained the only crystalline phase up to 1000°C.The presence of hematite was confirmed by the obtained Mössbauer spectra which showed the characteristic sextet. The apportion of iron ions in the Fe³⁺ and Fe²⁺ oxidation states was also determined, together with the attribution of the probable coordination states for Fe³⁺ ions.Complex magnetic structure appeared in samples treated above 800°C.     

Non-isothermal crystallization kinetics of ZnO-BaO-B2O3-SiO2 glass

Glass of composition 40SiO₂-30BaO-20ZnO-10B₂O₃ (mol%) was made by conventional melting and casting process. Crystallization kinetics of above glass has been investigated under non-isothermal conditions, using the formal theory of transformations for heterogeneous nucleation. The procedure is applied to the experimental data obtained by differential thermal analysis (DTA), using continuous-heating techniques. The crystallization results are analyzed, and both the activation energy of crystallization process as well as the crystallization mechanism is characterized. Dilatometric measurement of this glass was also done and data obtained was used to calculate the viscosity of the formed glass. Development of crystalline phases on thermal treatments of the glass at various temperatures has been analyzed by X-ray diffraction. Microstructure of the crystalline phases was investigated by scanning electron microscopy (SEM) and the development of various structural features with variation in heat treatment cycle was observed. The nucleation and growth of these phases in the matrix of glass has been described and discussed.     

Raman scattering study of crystalline and melting states of BaO·2B2O3

Melting and crystallization scenarios of barium tetraborate BaB₄O₇ (BaO·2B₂O₃) are studied in situ by Raman spectroscopy. It is shown that the scenario depends on the temperature–time history of melt. Crystallization conditions of the beta modification of barium tetraborate (β-BaB₄O₇) from a stoichiometric glass structure BaO·2B₂O₃ were investigated.     

Electrical and dielectric properties of Sb2O3–V2O5–K2O glasses

Electric measurements, including temperature dependencies of direct electrical conductivity and temperature dependencies of complex electrical modulus, have been implemented using Sb₂O₃–V₂O₅–K₂O glass samples. These glasses absorb ambient humidity but their resistance to water attack depends on composition. The significant decrease of conductivity up to 100 °C can arise from water desorption. Cycling measurements of direct electrical conductivity versus temperature were also implemented. They show that the 30Sb₂O₃–30V₂O₅–40K₂O and 70Sb₂O₃–30K₂O glasses are irreversibly damaged with the formation of the hydrated layer. In addition, it was observed that the evolution of DC conductivity is ruled by Arrhenius relation, while activation energy decreases as Sb₂O₃ concentration increases.     

Crystallization and dielectric properties of low temperature dielectrics containing Li2O filler

Crystallization and dielectric properties of typical low temperature co-fired ceramics (LTCC) consisting of calcium zinc aluminoborosilicate glass and Al₂O₃ filler were investigated by substituting the Al₂O₃ filler partially with Li₂O at the levels of 2-10 wt%. Depending on the content of Li₂O, densification was found significantly affected by early crystallization that resulted from the formation of unexpected crystalline phases including LiAlSiO₄, Ca₂SiO₄, LiAlO₂, and LiAlSi₃O₈. The effect of hindering sintering via earlier crystallization became enormous regardless of firing temperature when >5 wt% Li₂O substitution occurred. It was observed that the substitution of 2 wt% Li₂O for Al₂O₃ was beneficial in producing promising performance at the low temperature of 750 °C, which can be highlighted with k ∼ 8.7 and tan δ ∼ 0.009 at 1 MHz.     

Preparation of silica microspheres coated with V2O5 xerogel and V2O5/WO3 composite xerogel via adapted Stöber process

In the present study, we have synthesized spherical silica particles covered with either layered V₂O₅ xerogel or V₂O₅/WO₃ mixed xerogel via an adapted Stöber method using an ammonia solution of methyltriethoxysilane (MTES). The SEM images revealed the presence of a lamellar V₂O₅ xerogel layer coating the silica particles, as evidenced by the (0 0 1) diffraction lines. Both materials have voltammetric behavior that is quite similar to that of the V₂O₅ xerogel. The catalytic activity of the silica particles coated with the V₂O₅/WO₃ mixed xerogel was evaluated in the epoxidation of styrene using iodosylbenzene as an oxidant.     

The specific heat capacities of V2O5/P2O5-based glasses

The specific heat capacities of a series of V₂O₅/P₂O₅-based glasses have been measured in the approximate temperature range 3–300 K. The proportions of the host constituents were varied and the effects produced by adding oxides of copper, titanium and sodium were examined. The measurements were extended to investigate the influence of fast neutron irradiation upon the specific heat capacity of pure, initially crystalline V₂O₅.The observations are consistent with a spectrum of background vibrations, the form of which is temperature dependent. At intermediate temperatures the vibrations were consistent with the glasses displaying predominantly chain-like characteristics. With reduction to lower temperatures the vibrational behaviour increasingly resembled that of solids displaying three-dimensional characteristics. The temperature dependence of the specific heat capacity at the lowest temperatures was consistent with the presence of a narrow band of low-frequency modes centred upon 1.67 × 10¹¹ s^?1, the density of which increased with phosphorus content. From observations of the density of these modes in the doped specimens, it was concluded that the role of copper wass largely that of a network former, whereas titanium and sodium were essentially network modifiers.     

Chemical transformations in the W-Al2O3 system under pressure P = 1 bar near the melting point of aluminum oxide

The W-Al₂O₃ system has been considered at a temperature of 2400 K and a pressure of 1 bar. The main chemical processes providing the interaction between the components of the system have been determined. It is shown that evaporation of Al₂O₃ into the gas phase gives rise to numerous reactions, which involve not only tungsten but also Al₂O₃ melt. It is concluded that such interactions can be reduced by decreasing the Al₂O₃ evaporation, which can be done by increasing the inert gas pressure. This approach makes it possible both to optimize the parameters of sapphire crystal growth and increase the lifetime of a tungsten heater and other units of crystallization systems.     

EPR study of RLi2O.V2O5, RNa2O.V2O5, RCaO.V2O5, and RBaO.V2O5 modified vanadate glass systems

Experimental EPR spectra in several modified vanadate glass systems reveal hyperfine structure (hfs) lines whose widths vary with the molar ratio of modifier to vanadium pentoxide, R. In the RNa₂O.V₂O₅ system, for example, hfs lines show no resolution at low R values (near 0.1); by contrast, these lines exhibit dramatic narrowing as R approaches 0.5. In the model proposed here, this narrowing is due to an increase in hopping time for small polarons associated with V⁴⁺ ions in these systems. Increases in polaron hopping times are accompanied by increases in electron spin-spin relaxation times T₂'s, and, an associated narrowing of EPR linewidths. Experiments confirm that spectral widths are limited by electron T₂'s due to the fact that EPR linewidths do not vary with temperature down to 4.2 K. Resolved spectra in RNa₂O.V₂O₅ at R = 0.5 reveal a hyperfine coupling parameter of 0.0177 ± 0.0008 T, corresponding to an upper-limit polaron hopping frequency of 487 ± 20 MHz. By similar analyses, the systems of RCaO.V₂O₅, RBaO.V₂O₅, and RLi₂O.V₂O₅ exhibit comparable polaron hopping frequencies limits of 480 ± 20 MHz, 469 ± 20 MHz, and 468 ± 20 MHz, respectively, when R is near 1.0. In addition to the relaxation effects discussed here, results of modeling of resolved spectra to obtain hyperfine coupling constants A_|| and A_┴, and g_┴ values g_|| and g_┴ are presented and discussed.     

Pressure-induced crystallization in a bulk amorphous Zr-based alloy

Crystallization of multi-component on amorphous Zr-based alloy (Zr₄₁Ti₁₄Cu_12.5Ni₉Be_22.5C₁) is investigated at different pressures and temperatures. We have previously found that the primary crystallization temperature decreases with increasing pressure below 6 GPa, and the crystallization follows a different process under high pressure when compared to that at ambient pressure. In this work, pressure-induced crystallization is observed by in situ X-ray diffraction (XRD) using synchrotron radiation in a diamond anvil cell at ∼25 GPa and room temperature. This phase transition between amorphous and crystalline is reversible and the crystallized sample returns to the amorphous state during decompression. The mechanism for pressure-induced crystallization is discussed. We suggest that the crystallized phases under high pressure are interstitial solid solution phases formed from the amorphous matrix without long-range atomic rearrangements.     

Effect of P2O5 on the early stage crystallization of K-fluorrichterite glass-ceramics

The addition of 2 mol% P₂O₅ to stoichiometric K-fluorrichterite (KNaCaMg₅Si₈O₂₂F₂, KFR) has been reported to enhance the mechanical properties and improve the in vitro biocompatibility of this glass-ceramic by promoting the formation of enstatite and fluorapatite (FA). Here, the effect of further increasing the P₂O₅ concentration on phase evolution of KFR has been investigated. XRD data showed that mica crystallized in samples with 4 and 5 mol% P₂O₅ (GP4 and GP5, respectively) at 650 °C, but no diopside was detected at higher temperatures, in contrast with the general phase evolution in KFR based glass-ceramics. More importantly, however, the addition of ?4 mol% P₂O₅ induced phase separation of the glass into a silica glass matrix and phosphate rich droplets prior to crystallization. EDS traces taken from samples heat-treated at 600 °C, revealed that the silica glass matrix was deficient in Mg and unlikely to be the host for crystallization of mica. Conversely, the P₂O₅ rich regions contained excess Mg and were considered to be the host for the formation of mica and FA.     

Fabrication and properties of novel low-melting glasses in the ternary system ZnO-Sb2O3-P2O5

Glasses in the ternary system ZnO-Sb₂O₃-P₂O₅ were investigated as potential alternatives to lead based glasses for low temperature applications. The glass-forming region of ZnO-Sb₂O₃-P₂O₅ system has been determined. Structure and properties of the glasses with the composition (60 − x)ZnO-xSb₂O₃-40P₂O₅ were characterized by infrared spectra (IR), differential thermal analysis (DTA) and X-ray diffraction (XRD). The results of IR indicated the role of Sb³⁺ as participant in glass network structure, which was supported by the monotonic and remarkable increase of density (ρ) and molar volume (V_M) with increasing Sb₂O₃ content. Glass transition temperature (T_g) and thermal stability decreased, and coefficient of thermal expansion (α) increased with the substitution of Sb₂O₃ for ZnO in the range of 0-50 mol%. XRD pattern of the heat treated glass containing 30 mol% Sb₂O₃ indicated that the structure of antimony-phosphate becomes dominant. The improved water durability of these glasses is consistent with the replacement of easily hydrated phosphate chains by corrosion resistant P-O-Sb bonds. The glasses containing ?30 mol% Sb₂O₃ possess lower T_g (<400 °C) and better water durability, which could be alternatives to lead based glasses for practical applications with further composition improvement.     

Effects of Li replacement on the nucleation, crystallization and microstructure of Li2O-Al2O3-SiO2 glass

The Li replacement including the Li₂O replaced by other oxides and the expensive Li₂CO₃ replaced by low-cost spodumene mineral was studied to lower the product cost of (Li₂O-Al₂O₃-SiO₂, LAS) glass ceramic, and the effects of Li replacement on the nucleation, crystallization and microstructure of LAS glass were investigated by the differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that Li₂O replacement increases the crystallization activation energy, lowers the crystal growth, and increases the nucleation and crystallization temperature by restraining the formation of crystalline phases. The Li₂CO₃ replacement decreases the crystallization activation energy, promotes the crystal growth, without affecting the nucleation, and lowers the crystallization temperature by adding some beneficial compositions with mixed alkali effect.     

Contact-limited conduction in V2O5P2O5 glasses

The electrical properties of V₂O₅P₂O₅ glass-electrode interfaces have been investigated. Gold, graphite and aluminium, in that order, form contacts of increasing resistance. The dependence of barrier height on the work function of the electrode material is not consistent with the concept of Schottky barriers at the interfaces. The phenomenon may be explained by the downward bending and filling of a narrow band normally situated in the vicinity of the Fermi level, caused by injection of electrons from the less noble metals. This gives rise to a surface layer, which can, in principle, be insulating. However, alternative mechanisms, in the case of the investigated glasses most probably a Poole-Frenkel type field enhanced conduction via separated traps, lead to finite interface resistance.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.