Effects of BaTiO_3 and SrTiO_3 as the buffer layers of epitaxial BiFeO_3 thin films

BiFeO_3 (BFO) thin films with BaTiO_3 (BTO) or SrTiO_3 (STO) as buffer layer were epitaxially grown on SrRuO_3-covered SrTiO_3 substrates. X-ray diffraction measurements show that the BTO buffer causes tensile strain in the BFO films, whereas the STO buffer causes compressive strain. Different ferroelectric domain structures caused by these two strain statuses are revealed by piezoelectric force microscopy. Electrical and magnetical measurements show that the tensile-strained BFO/BTO samples have reduced leakage current and large ferroelectric polarization and magnetization, compared with compressively strained BFO/STO. These results demonstrate that the electrical and magnetical properties of BFO thin films can be artificially modified by using a buffer layer.     

Effects of BaTiO<Subscript>3</Subscript> and SrTiO<Subscript>3</Subscript> as the buffer layers of epitaxial BiFeO<Subscript>3</Subscript> thin films

BiFeO₃ (BFO) thin films with BaTiO₃ (BTO) or SrTiO₃ (STO) as buffer layer were epitaxially grown on SrRuO₃-covered SrTiO₃ substrates. X-ray diffraction measurements show that the BTO buffer causes tensile strain in the BFO films, whereas the STO buffer causes compressive strain. Different ferroelectric domain structures caused by these two strain statuses are revealed by piezoelectric force microscopy. Electrical and magnetical measurements show that the tensile-strained BFO/BTO samples have reduced leakage current and large ferroelectric polarization and magnetization, compared with compressively strained BFO/STO. These results demonstrate that the electrical and magnetical properties of BFO thin films can be artificially modified by using a buffer layer.     

Size-induced appearance of ferroelectricity in thin antiferroelectric films

In the paper we consider size effects on phase transitions and polar properties of thin antiferroelectric films. We extend the phenomenological approach proposed by Kittel for thin films allowing for gradient (correlation) energy and depolarization field energy. Surface piezoelectric effect as well as misfit strain appear due to lattice constants mismatch between the film and its substrate. Direct variational method is used to derive the free energy with renormalized coefficients depending on the film thickness. Obtained free energy expression allows the calculation of phase diagrams and all electro-physical properties by a conventional minimization procedure. Approximate analytical expressions for the paraelectric–antiferroelectric–ferroelectric transition temperature dependences on film thickness, polarization gradient coefficient, and extrapolation lengths were obtained. The thickness dependence of the electric field critical value that causes antiferroelectric–ferroelectric phase transition was calculated. Under favorable conditions the antiferroelectric phase at first transforms into ferroelectric one and then into paraelectric phase with the decrease of the film thickness. Proposed theoretical consideration explains the experimental results obtained in antiferroelectric PbZrO₃ thin films.     

Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

Electromechanical properties of lanthanum-doped lead hafnate titanate thin films for integrated piezoelectric MEMS applications

This paper focuses on the deposition and electromechanical characterization of lanthanum-doped lead hafnate titanate (PLHT) thin films as key material in piezoelectric microelectromechanical systems (pMEMS). PLHT (x/30/70) and PLHT(x/45/55) films with a thickness between 150 nm and 250 nm were deposited by chemical solution deposition (CSD). Thereby x varies between 0 and 10% La content. The electrical characterization shows that undoped (x=0) PLHT exhibit ferroelectric behavior similar to PZT of the same composition. La doping results in reduced ferroelectric properties and also affects the electromechanical properties. Measurements using a double beam laser interferometer yield a piezoelectric coefficient d ₃₃ of 60 pm/V, which stays constant with an increasing electric field. This leads to a linear displacement compared to undoped PLHT or conventional PZT films used for MEMS applications.     

Diffusion processes in seeded and unseeded SBT thin films with varied stoichiometry

SrBi₂Ta₂O₉ (SBT) is a bismuth layered perovskite (BLP) with interesting ferroelectric properties for memories applications. The previous study on the synthesis of seeded and unseeded SBT thin films by the authors [G. González Aguilar, M.E.V. Costa, I.M. Miranda Salvado, J. Eur. Ceram. Soc. 25 (2005) 2331] has shown an increase of the crystallinity of the films and an improvement of the thin film ferroelectric properties when using SBT seeds. However, the detailed role of the seeds as an improver of the thin film properties has not been investigated so far. In the present work we study the role of the seeds, particularly with respect to the reactions between film and (bottom) underlying platinum electrode. The comparison of the results obtained by characterizing the seeded and unseeded thin films via Rutherford backscattering (RBS) and particle induced X-ray emission (PIXE) techniques reveals an effective modification of the substrate-thin film interface by the presence of the seeds. Moreover, the evaluation of the thin film ferroelectric properties by atomic force microscopy (AFM) shows an improvement of the local piezoelectric hysteresis loops by the seeds. These seeding effects as well as those observed in non-stoichiometric SBT thin films with different bismuth contents are used to discuss the barrier-like role of the SBT seeds against reactions between film and the platinum electrode and its contribution to the improvement of the thin film properties.     

Thickness-dependent of conduction mechanism and bias electric field modulation of transport properties for SrRuO3/PMN-PT heterostructures

Ultra-thin SrRuO₃ (SRO) films have been grown on ferroelectric and piezoelectric PMN-PT substrates. The structural properties of these films have been characterized by atomic force microscopy, x-ray diffraction and cross-sectional transmission electron microscopy. The nature of electric transport was analyzed in detail and the conduction mechanism of SRO films evolves through three regimes: from a three-dimensional (3D) metallic through a weakly localized to a strongly localized behavior as film thickness is reduced. The bias electric field modulations of transport properties and magnetic properties were explored for these films. We also demonstrate that ferroelectric (FE) domain switching induces a reversible tuning of the magnetic and electric properties in SRO/PMN-PT heterostructure. The FE domain switching in the substrate contributes to an in-plane strain that changes the spin exchange coupling in the SRO layer, and therefore results in a reversible resistance difference of up to 16%. This modulation effect on the electric properties by an electric field demonstrates great potential for the applications of all-oxides spintronics devices.     

Observation of nanoscale 180 degrees stripe domains in ferroelectric PbTiO3 thin films

We report the observation of periodic 180 degrees stripe domains below the ferroelectric transition in thin films. Epitaxial PbTiO3 films of thickness d=1.6 to 42 nm on SrTiO3 substrates were studied using x-ray scattering. Upon cooling below T(C), satellites appeared around Bragg peaks indicating the presence of 180 degrees stripe domains of period Lambda=3.7 to 24 nm. The dependence of Lambda on d agrees well with theory including epitaxial strain effects, while the suppression of T(C) for thinner films is significantly larger than that expected solely from stripe domains.     

Effect of epitaxial strain on the spontaneous polarization of thin film ferroelectrics

Epitaxial strain can substantially enhance the spontaneous polarizations and Curie temperatures of ferroelectric thin films compared to the corresponding bulk materials. In this Letter we use first principles calculations to calculate the effect of epitaxial strain on the spontaneous polarization of the ferroelectrics , , and , and the multiferroic material . We show that the epitaxial strain dependence of the polarization varies considerably for the different systems, and in some cases is, in fact, very small. We discuss possible reasons for this different behavior and show that the effect of epitaxial strain can easily be understood in terms of the piezoelectric and elastic constants of the unstrained materials. Our results provide a computational tool for the quantitative prediction of strain behavior in ferroelectric thin films.     

Nonlinear piezoelectricity in epitaxial ferroelectrics at high electric fields

Nonlinear effects in the coupling of polarization with elastic strain have been predicted to occur in ferroelectric materials subjected to high electric fields. Such predictions are tested here for a PbZr0.2Ti0.8O3 ferroelectric thin film at electric fields in the range of several hundred MV/m and strains reaching up to 2.7%. The piezoelectric strain exceeds predictions based on constant piezoelectric coefficients at electric fields from approximately 200 to 400 MV/m, which is consistent with a nonlinear effect predicted to occur at corresponding piezoelectric distortions.     

Irradiation behavior and recovery effect of ferroelectric properties of PZT thin films

Lead zirconate titanate piezoelectric ceramics have important applications in space and aerospace technology, but the effect and physical mechanism of charged particle radiation on their performance yet to be clarified. In this study,we characterized PbZr_(0.52)Ti_(0.48)O_3(PZT) thin films, and changes in the ferroelectric properties of the films before and after electron and proton irradiation were investigated. The natural and heat treatment recoverability of the ferroelectric properties were studied, and the damages and mechanisms of different types of radiation in PZT films were also investigated.The results show that, in addition to ionization damages, electron irradiation causes certain structural damage on the PZT film, and the large structural damage caused by proton irradiation reduces drastically the ferroelectricity of the PZT film.     

Giant flexoelectric effect in ferroelectric epitaxial thin films

We report on nanoscale strain gradients in ferroelectric HoMnO(3) epitaxial thin films, resulting in a giant flexoelectric effect. Using grazing-incidence in-plane x-ray diffraction, we measured strain gradients in the films, which were 6 or 7 orders of magnitude larger than typical values reported for bulk oxides. The combination of transmission electron microscopy, electrical measurements, and electrostatic calculations showed that flexoelectricity provides a means of tuning the physical properties of ferroelectric epitaxial thin films, such as domain configurations and hysteresis curves.     

Structural and electrical properties of (Na0.85K0.15)0.5Bi0.5TiO3 thin films deposited on LaNiO3 and Pt bottom electrodes

(Na_0.85K_0.15)_0.5Bi_0.5TiO₃ thin films were deposited on LaNiO₃(LNO)/SiO₂/Si(1 0 0) and Pt/Ti/SiO₂/Si(1 0 0) substrates by metal-organic decomposition, and the effects of bottom electrodes LNO and Pt on the ferroelectric, dielectric and piezoelectric properties were investigated by ferroelectric tester, impedance analyzer and scanning probe microscopy, respectively. For the thin films deposited on LNO and Pt electrodes, the remnant polarization 2P_r are about 22.6 and 8.8 μC/cm² under 375 kV/cm, the dielectric constants 238 and 579 at 10 kHz, the dielectric losses 0.06 and 0.30 at 10 kHz, the statistic d_33eff values 95 and 81 pm/V. The improved piezoelectric properties could make (Na_1−xK_x)_0.5Bi_0.5TiO₃ thin film as a promising candidate for piezoelectric thin film devices.     

Preparation and characterization of poled nanocrystal and polymer composite PZT/PC films

Pb(Zr_0.52Ti_0.48)O₃ (PZT) nanocrystals and transparent polycarbonate (PC) composite thin films with useful properties for ferroelectric, piezoelectric and electro-optic devices were prepared by a spin-coating technique. Ultra-fine PZT (∼40–50 nm) nanocrystals with pure perovskite tetragonal phase were synthesized by a hydrothermal method. The structure and morphology of the composite thin films were studied by means of X-ray diffraction and scanning electron microscopy. To obtain the optimum electro-optic properties of poled composite films, the poling condition under an external electric field was optimized through the dielectric properties of PZT and PC polymer and effective field intensity theory. The electro-optic coefficient of the poled PZT/PC composite film is estimated to be 30.5 pm/V. The transparency spectra were measured and the optical band gaps of the unpoled, poled at 145 °C and poled at 165 °C composite thin films are estimated to be 4.26 eV, 4.21 eV and 4.18 eV, respectively. The measured dielectric constants of PZT/PC are in good agreement with the calculated values for the composite with a very small PZT volume fraction, based on the Onsager effective-field theory. This offers a reliable and indirect way to predict the dielectric constant of nanocrystals. PACS 81.40.Tv; 78.66.Sq; 78.66.Vs     

Suppressed dependence of polarization on epitaxial strain in highly polar ferroelectrics

A combined experimental and computational investigation of coupling between polarization and epitaxial strain in highly polar ferroelectric PbZr(0.2)Ti(0.8)O3 (PZT) thin films is reported. A comparison of the properties of relaxed (tetragonality c/a approximately 1.05) and highly strained (c/a approximately 1.09) epitaxial films shows that polarization, while being amongst the highest reported for PZT or PbTiO3 in either film or bulk forms P(r) approximately 82 microC/cm(2)), is almost independent of the epitaxial strain. We attribute this behavior to a suppressed sensitivity of the A-site cations to epitaxial strain in these Pb-based perovskites, where the ferroelectric displacements are already large, contrary to the case of less polar perovskites, such as BaTiO3. In the latter case, the A-site cation (Ba) and equatorial oxygen displacements can lead to substantial polarization increases.     

Superior electromechanical performance over PZT, in lead zinc niobate (PZN)–lead zirconium titanate (PZT) thin films

Strongly oriented thin films of lead zinc niobate (PZN)–lead zirconium titanate (PZT) with (La,Sr)CoO₃ lower electrodes were grown on MgO {001} substrates by pulsed laser deposition. The films were perovskite-dominated with strong in-plane and out-of-plane orientations. Room-temperature functional characterisation indicated that the films were ferroelectric, with dielectric constant ∼550 and loss tangent ∼0.08 at 1 kHz. The crystallographic strain, as a function of applied dc field, was monitored by in situ X-ray diffraction. The maximum electric-field-induced crystallographic strain (∼0.22%) was comparable to that observed in bulk, but at significantly greater field (∼150 kV cm^-1). The effective d₃₃ value obtained from the crystallographic strain data was around 150 pm V^-1, which is high for ferroelectric thin films 400 nm in thickness. The local polarisation-switching properties of the films were investigated using a piezo-response atomic force microscope. Domain maps for a 5×5 μm² region of material were recorded as a function of dc bias, and confirmed the ferroelectric switching behaviour. PACS 81.05.Je; 81.40.Vw; 68.37.Lp     

烘烤温度对溶胶-凝胶法制备镧掺杂钛酸铋薄膜结构与铁电性质的影响

采用溶胶-凝胶法，在保持薄膜结晶温度和有机物分解温度相同情况下，发现烘烤温度（即溶剂的挥发温度）对镧掺杂钛酸铋薄膜的晶体结构、表面形貌和铁电性质均产生重要影响.在较低烘烤温度下得到的薄膜（117）择优取向明显.但随着烘烤温度增加，薄膜的（117）择优取向逐渐减弱.薄膜的表面晶粒形貌则从棒状逐渐转变为盘状.还测量了薄膜的铁电性质，发现在250℃烘烤温度下得到的薄膜具有最大的剩余极化强度，2Pr为28.4μC/cm2.对实验现象进行了定性解释. 关键词： 溶胶-凝胶法 烘烤温度 铁电薄膜     

Ferroelectric properties of Nd-substituted bismuth titanate thin films processed at low temperature

Nd-substituted bismuth titanate Bi_3.54Nd_0.46Ti₃O₁₂ (BNT) thin films were prepared on (111)Pt/Ti/SiO₂/Si substrates by a sol–gel method. The BNT thin films processed at a low annealing temperature of ∼600 °C showed good ferroelectric properties. The randomly oriented BNT single phases and the improved ferroelectric properties were confirmed by X-ray diffraction and polarization–electric field hysteresis loops, respectively. The remanent polarization of the BNT thin films is 64 μC/cm², which is larger than that of Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films. After 10¹⁰ read/write switching cycles, the effective non-volatile charges showed no polarization fatigue. Regardless of the low annealing temperature of 600 °C, the BNT thin films had good ferroelectric properties with high remanent polarizations and strong fatigue resistances. PACS 77.84.Dy     

应力作用下EuTiO3铁电薄膜电热效应的唯象理论研究

基于Laudau-Devonshire的热动力学模型, 计算了EuTiO₃铁电薄膜材料的电热效应. 结果显示在外加应力的调控下, 电极化、电热系数以及绝热温差都会随之变化. 外加垂直于表面的张应力加大, 薄膜的相变温度升高, 绝热温差增加, 最大绝热温差所对应的工作温度向高温区移动. 对于二维平面失配应变u_m =-0.005的薄膜, 当外加张应力σ₃ = 5 GPa时, 其最大电热系数为1.75×10^-3 C/m²·K, 电场变化200 MV/m 时室温下绝热温差ΔT 的最大值可达到14 K 以上, 绝热温差ΔT ≥13 K 的工作温区超过120 K, 表明可以通过调控外部应力来获取室温时较大的绝热温差. 此结果预示着铁电EuTiO₃ 薄膜在室温固态制冷方面可能具有较好的应用前景.     

Film thickness dependence of electro-optic effect in epitaxial BaTiO3 thin films

Based on the phenomenological Landau-Devonshire theory, we investigate the film thickness dependence of ferroelectric and electro-optic properties of epitaxial BaTiO₃ thin films grown on SrTiO₃ and MgO substrates. By using the effective substrate lattice parameter concept, the film thickness dependence of misfit strain is incorporated into the theory. Therefore, the film thickness dependence of ferroelectric and electro-optic properties in epitaxial BaTiO₃ thin films can be explained. Moreover, a large quadratic electro-optic effect was obtained in the BaTiO₃ thin films, which is in good agreement with the experimental result of BaTiO₃ thin films on the MgO substrate.