Highly regioselective hydroiodination of terminal alkynes and silylalkynes with iodine and phosphorus reagents leading to internal iodoalkenes

Markovnikov-type hydroiodination of terminal alkynes with iodine and Ph₂P(O)H took place selectively to afford the corresponding internal iodoalkenes in good yields. Combination of (PhO)₂P(O)H and Ph₂P(O)OH instead of Ph₂P(O)H also provided internal iodoalkenes in excellent yields. This hydroiodination is advantageous in terms of mild conditions, convenient operation, and tolerance to various functional groups. In addition, direct synthesis of internal iodoalkenes from silylalkynes was also achieved by using a mixed system of iodine and phosphorus reagents.     

Platinum-catalyzed intermolecular hydroamination of terminal alkynes

The hydroamination of terminal alkyl- and arylacetylenes with aniline is catalyzed by platinum(II) bromide, yielding the corresponding imines. Contrary to what has been previously demonstrated for the platinum(II)-catalyzed hydroamination of -olefins, the presence of n-Bu₄PBr has a detrimental effect on the course of the reaction. The hydroamination of 1-hexyne is highly regioselective (Markovnikov) at 60 °C, but the regioselectivity decreases upon increasing the temperature. The hydroamination of phenylacetylene is fully regioselective (Markovnikov) at 100 °C. TON up to 146 were obtained in the presence of a catalytic source of protons.     

铜催化的端基炔偶联反应的研究进展

综述了近年来应用于端基炔偶联反应的均相、多相铜基催化剂的研究进展,包括Cu(I)、Cu(II)以及CuNPs催化剂。阐述了各催化剂催化端基炔偶联反应的最优条件,从催化剂的寿命、底物适用性等方面比较了各催化剂的性能,以及各类催化剂的可能反应机理。通过比较可得,负载型Cu(II)多相催化剂稳定且制备过程简单易行,反应条件温和、效率高,将可能成为端基炔偶联反应今后发展的主要趋势。     

水溶性salen-Co（III）配合物催化的端炔水合反应

报道了一种用于端炔水合反应的水溶性salen-Co(III)配合物催化剂,在使用硫酸作为共催化剂的条件下能高效得到产物甲基酮。该催化剂用量少,反应结束后可利用简单的萃取实现产物与催化剂分离,简化了后处理过程。此外,催化剂还可回收重复使用,但催化剂活性会略有下降。     

Regiocontrol in the palladium-catalyzed hydrophosphinylation of terminal alkynes

The regioselectivity of the palladium-catalyzed hydrophosphinylation of terminal alkynes was investigated. Complementary conditions to achieve the predominant formation of either the linear or the branched alkenyl-H-phosphinate products were identified. With Pd/xantphos in acetonitrile, the linear isomer is generally obtained with good to excellent selectivity, and E-stereospecificity. On the other hand, by using Pd/dppf in the non-polar solvent toluene, good selectivity for the branched alkenyl-H-phosphinate is typically observed. The role of various reaction parameters is studied.     

Efficient synthesis of enynes by tetraphosphine-palladium-catalysed reaction of vinyl bromides with terminal alkynes

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst, a range of vinyl bromides undergoes Sonogashira cross-coupling reaction with a variety of alkynes, leading to the corresponding 1,3-enynes in good yields. The reaction tolerates several alkynes such as phenylacetylene, dec-1-yne, 2-methylbut-1-en-3-yne a range of alk-1-ynols, 3,3-diethoxyprop-1-yne and a propargyl amine. Higher reactions rates were observed in the presence of phenylacetylene, dec-1-yne, but-3-yn-1-ol, pent-4-yn-1-ol, 3,3-diethoxyprop-1-yne or 1,1-dipropyl-2-propynylamine than with propargyl alcohol, 3-methoxy-prop-1-yne or 2-methylbut-1-en-3-yne. This catalyst can be used at low loading even for reactions of sterically hindered vinyl bromides such as bromotriphenylethylene or 2-bromo-3-methyl-but-2-ene.     

Recent advances in the boration and cyanation functionalization of alkenes and alkynes

Alkenyl boron-esters and acrylonitrile groups are key structural functional groups found in dyes, pesticides, fluorescent compounds, functional materials, and biologically active drugs. Considerable efforts have been devoted for the introduction of boron-esters and acrylonitrile groups by using alkenes and alkynes conversion routes for boronation, hydroboronation, dehydrogenative boronation, cyanation, hydrocyanation, alkylcyanation, cyanomethylation. These reported methodologies are very valuable for the industrial production of acrylonitriles and alkenyl boron esters.     

Iridium complex-catalyzed addition of water and alcohols to non-activated terminal alkynes

The addition of water and alcohols to non-activated terminal alkynes was found to be promoted by an iridium complex combined with Lewis acid and phosphite. Thus, terminal alkynes reacted with water or alcohols to give ketones or ketals, respectively, in good to excellent yields. α,ω-Diyne like 1,7-octadiyne was converted into 1-(2-methyl-cyclopent-1-enyl)ethanone through the intramoleculer aldol condensation of the resulting 2,7-octanedione induced by Lewis acid.     

Platinum chloride/Xphos-catalyzed regioselective hydrosilylation of functionalized terminal arylalkynes

Totally regioselective hydrosilylation of functionalized terminal arylalkynes was achieved using PtCl₂ associated with the air-stable and bulky Xphos ligand with various silanes. Regardless of the electronic nature of the substituents on the aromatic ring, a single β-(E)-vinylsilane was obtained in excellent yields.     

A convenient scalable one-pot conversion of esters and Weinreb amides to terminal alkynes

Esters and amides undergo reduction to the corresponding aldehydes using DIBAL-H followed by same pot conversion to terminal alkynes utilizing the Bestmann-Ohira reagent in good to excellent yields. Additionally chiral nonracemic substrates undergo this transformation with complete preservation of stereochemical integrity.     

Iminophosphine-palladium(0) complexes as catalysts in the alkoxycarbonylation of terminal alkynes

In the presence of methanesulfonic acid, the palladium(0)-olefin complexes: [Pd(η²-ol)(P---N)] [ol=dimethyl fumarate or fumaronitrile, P---N=1-(Ph₂P)C₆H₄-2-CH=NR (R=CMe₃ or C₆H₄OMe-4)] catalyse the alkoxycarbonylation of terminal alkynes. Moderately good rates are obtained when the catalysts are promoted with two equivalents of the free P---N ligand and a large excess of acid at 120°C. The catalytic data suggest that derivatives of the type [Pd(alkyne)(P---N)_n] (n=2–3) are the active catalytic species.     

Copper-catalyzed cascade coupling/cyclization of terminal alkynes with diazoacetates: a straightforward route for trisubstituted furans

A copper-catalyzed cascade coupling/cyclization of terminal alkynes with α-alkyl substituted diazoesters is developed. This new method furnished a straightforward route for 2,3,5-trisubstituted furan derivatives with good efficiency and selectivity.     

Hydration of aromatic terminal alkynes catalyzed by sulfonated condensed polynuclear aromatic (S-COPNA) resin in water

Hydration of aromatic terminal alkynes in the presence of a catalytic amount of sulfonated condensed polynuclear aromatic (S-COPNA) resin in water gave the corresponding methyl ketones in good yields. On the other hand, aliphatic terminal alkynes did not react at all under the employed conditions. Chemoselective hydration of aromatic terminal alkyne in the presence of aliphatic terminal alkyne catalyzed by S-COPNA resin was carried out.     

Nickel-catalyzed coupling of terminal allenes, aldehydes, and silanes

The development of a nickel-catalyzed coupling of terminal allenes, aldehydes, and silanes is described. This transformation selectively provides 1,1-disubstituted allylic alcohols, protected as a silyl ether. The choice of the reducing agent is essential for achieving selectivity in this coupling process. A trialkylphosphine (Cyp₃P) and an N-heterocyclic carbene (IPr) are complementary in this reaction.     

Carbonylation of terminal alkynes catalysed by Pd complexes in combination with tri(2-furyl)phosphine and methanesulfonic acid

Pd(OAc)₂ in combination with tri(2-furyl)phosphine and methanesulfonic acid is an efficient catalyst for the alkoxycarbonylation of 1-alkynes. Fairly good reaction rates are obtained under mild conditions (50–80°C and P(CO)=20 bar) with high regioselectivity (ca. 95%) towards the formation of 2-substituted acrylic ester.     

The cycloaddition reactions of 2-ethoxy-3-phenylvinylketene iron(0) with alkynes to yield catechol derivatives

Tricarbonyl(3-ethoxy-4-phenyl-1-oxa-1,2,4-pentatrienone) iron(0) reacts with a variety of electron deficient and electron rich alkynes to produce catechol monoethyl ethers in moderate to good yield. Steric hindrance of the alkyne often exerts a stronger influence than electronic factors in determining the product distribution. The reaction with several alkyl, silyl, and aryl alkynes produced alkyne trimers as the major products.     

Cs2CO3-mediated synthesis of terminal alkynes from 1,1-dibromo-1-alkenes

An unprecedented route to prepare terminal alkynes from 1,1-dibromo-1-alkenes mediated by Cs₂CO₃ was proven. 1,1-Dibromo-1-alkenes bearing various functional groups were efficiently converted to corresponding terminal alkynes in moderate to excellent yields.     

A simple catalyst system for the palladium-catalyzed coupling of aryl halides with terminal alkynes

A convenient catalyst system consisting of Pd(OAc)₂, PPh₃, K₃PO₄ and DMSO was found to be effective for the coupling reaction of aryl halides with terminal alkynes as well as the deacetonative coupling reaction using a 4-aryl-2-methylbut-3-yn-2-ol as a terminal alkyne precursor. An iminophosphine as a ligand worked more effectively for some combination of substrates than triphenylphosphine.