边缘修饰的石墨烯纳米带电子特性的第一性原理研究

本文采用第一性原理计算方法,研究了zigzag型石墨烯纳米带在边缘采用不同基团（包括氢原子、羟基、酮基、氢和羟基共同饱和）进行修饰后电子特性的改变,计算了能带结构、态密度和电荷差分密度。结果分析表明,不同基团修饰的影响本质上可归结于不同的边缘杂化方式。边缘sp2杂化方式对GNRs体系内层原子的电子状态影响很小,没有改变zigzag-GNRs的金属性;而边缘sp3杂化的体系在能带结构中打开了一个带隙,此带隙随纳米带宽度的增加而逐渐减小。其中GNRs-H2 体系和GNRs-H2O体系发生了由金属性向半导体性的转变,而GNRs-O体系费米能级升高并且进入了导带,依然呈现金属性。利用这种边缘修饰非常易于调控GNRs的电子能带结构。     

石墨烯纳米带卷曲效应对其电子特性的影响

石墨烯纳米带 (GNRs) 是一种重要的纳米材料, 碳纳米管可看作是GNRs卷曲而成的无缝圆筒. 利用基于密度泛函理论的第一性原理方法, 系统研究了GNRs卷曲变形到不同几何构型时, 其电子特性, 包括能带结构 (特别是带隙) 、态密度、透射谱的变化规律. 结果表明: 无论是锯齿型GNRs (ZGNRs) 或扶手椅型GNRs (AGNRs), 在其卷曲成管之前, 其电子特性对卷曲形变均不敏感, 这意味着GNRs的电子结构及输运特性有较强地抵抗卷曲变形的能力. 当GNRs 卷曲成管后, ZGNRs和AGNRs表现出完全不同的性质, ZGNRs几乎保持金属性不变或变为准金属; 但AGNRs的电子特性有较大的变化, 出现不同带隙半导体、准金属之间的转变, 这也许密切关系到碳纳米管管口周长方向上的周期性边界条件及量子禁锢的改变. 这些研究对于了解GNRs电子特性的卷曲效应、以及GNRs与碳纳米管电子特性的关系 (结构与特性的关系) 有重要意义. 关键词： 石墨烯纳米带 卷曲效应 电子特性 密度泛函理论     

氢、氟原子边缘修饰β-GeSe纳米带的第一性原理研究

采用第一性原理计算方法研究了二维β相GeSe的电子结构,通过对二维单层β-GeSe剪切得到一维β-GeSe扶手椅型纳米带.研究不同带宽(N=1-5)β-GeSe扶手椅型纳米带的几何结构和电子性质,发现不同带宽纳米带能带带隙不同,带隙总体上随着带宽减小,而纳米带直接带隙半导体性质不受带宽影响.通过使用H、F原子对GeSe扶手椅型纳米带边缘修饰,H原子修饰纳米带导致能带类型从直接带隙向间接带隙的转变.在费米能级附近处F原子各轨道对价带和导带贡献比H原子各轨道贡献多,在边缘修饰中纳米带对F原子更加敏感.未修饰和使用H原子修饰纳米带在可见光范围内没有吸收峰,用F原子修饰纳米带在可见光范围内出现吸收峰.研究表明可以通过边缘修饰调控纳米带光学特性.     

硼烯纳米带能带结构和态密度的第一性原理研究

基于密度泛函理论,采用第一性原理的方法计算H修饰边缘不同宽度硼稀纳米带的电荷密度、电子能带结构、总态密度和分波态密度。结果表明,硼烯纳米带的宽度大小影响着材料的导电性能,宽度5的硼烯纳米带是间接带隙简并半导体,带隙值为0.674 eV,而宽度7的硼烯纳米带却具有金属材料的性质。分波态密度表明,宽度5的硼烯纳米带的费米能级附近主要是由B-2s、2p电子态贡献,H-1s主要贡献于下价带且具有局域性,消除了材料边缘的不稳定性。宽度7的B-2p和H-1s电子态贡献的导带和价带处于主导地位,费米能级附近B-2p和H-1s电子态的杂化效应影响材料的整体发光性能。     

边修饰GeS2纳米带的电子特性及调控效应

GeS₂单层已成功制备,为了进一步扩展其应用范围以及发现新的物理特性,我们构建扶手椅型GeS₂纳米带(AGeS₂NR)模型,并采用不同浓度的H或O原子进行边缘修饰,且对其结构稳定性、电子特性、载流子迁移率以及物理场调控效应进行深入研究.研究表明边修饰纳米带具有良好的能量与热稳定性.裸边纳米带是无磁半导体,而边修饰能改变AGeS₂NR的带隙,使其成为宽带隙或窄带隙半导体,或金属,这与边缘态消除或部分消除或产生杂化能带有关,所以边缘修饰调控扩展了纳米带在电子器件及光学器件领域的应用范围.此外,计算发现载流子迁移率对边缘修饰十分敏感,可以调节纳米带载流子迁移率(电子、空穴)的差异达到1个数量级,同时产生载流子极化达到1个数量级.研究还表明半导体性纳米带在较大的应变范围内具有保持电子相不变的鲁棒性,对于保持相关器件电子输运的稳定性是有益的.绝大部分半导体性纳米带在较高的外电场作用下,都具有保持半导体特性不变的稳定性,但带隙随电场增大而明显变小.总之,本研究为理解GeS₂纳米带特性并研发...     

Mn掺杂GaN稀磁半导体的电磁特性研究

采用基于密度泛函理论的第一性原理平面波超软赝势法计算了不同浓度Mn掺杂GaN(Ga1-xMnxN,x=0.0625和0.1250)的晶格常数、能带结构和态密度,分析比较了掺杂前后GaN的电子结构和磁性.结果表明:Mn掺入后体系仍为直接带隙半导体,带隙宽度随Mn含量的增加逐步增大.Mn掺杂GaN均使得N2p与Mn3d轨道杂化,产生自旋极化杂质带,自旋向上的能带占据费米面,掺杂后的Ga1-xMnxN表现为半金属铁磁性,适合自旋注入;随着Mn掺杂浓度的增加,体系的半金属性有所增强.     

Mn掺杂GaN稀磁半导体的电磁特性研究

采用基于密度泛函理论的第一性原理平面波超软赝势法计算了不同浓度Mn掺杂GaN（Ga1-xMnxN, x=0.0625和0.1250）的晶格常数、能带结构和态密度,分析比较了掺杂前后GaN的电子结构和磁性。结果表明：Mn掺入后体系仍为直接带隙半导体,带隙宽度随Mn含量的增加逐步增大。Mn掺杂GaN均使得N 2p与Mn 3d轨道杂化,产生自旋极化杂质带,自旋向上的能带占据费米面,掺杂后的Ga1-xMnxN表现为半金属铁磁性,适合自旋注入;随着Mn掺杂浓度的增加,体系的半金属性有所增强。     

Mn掺杂对半金属铁磁体Fe_2Si电磁特性的影响

此文用基于密度泛函理论第一性原理的贋势平面波方法,计算了Fe_2Si及Mn掺杂Fe_2Si体系的能带结构、电子态密度和磁学特性,分析了不同位置Mn掺杂对Fe_2Si电磁特性的影响,获得了纯的和不同位置Mn掺杂的Fe_2Si体系是铁磁体,自旋向上的能带结构穿过费米面表现金属特性,纯Fe_2Si的半金属隙为0.164e V;Mn掺杂在Fe1位时,自旋向下部分转变为A-M间的间接带隙半导体,体系呈现半金属特性,此时磁矩为2.00μB,是真正的半金属性铁磁体;掺杂在Fe2位时,自旋向下部分的带隙值接近于0,体系呈现金属特性;掺杂在Fe3位时,自旋向下部分转变为L-L间的直接带隙半导体,体系呈现半金属特性等有益结果 .自旋电荷密度分布图表明Mn原子的3d电子比较局域,和周围原子成键时3d电子更倾向于形成共价键.体系的半金属性和磁性主要来源于Fe-3d电子与Mn-3d电子之间的d-d交换,Si-3p电子与Fe、Mn-3d电子之间的p-d杂化.这些结果为半金属铁磁体Fe_2Si的电磁调控提供了有效的理论指导.     

氢化与非氢化石墨烯纳米条带的密度泛函研究

基于密度泛函理论的第一性原理计算方法,研究了宽度N=8的边缘氢化和非氢化条带的结构和电子性质. 研究表明,扶手形无氢化石墨纳米条带的边缘碳原子是以三重键相互结合,它在边缘的成键强度比氢化时要高,具有更强的化学活性,可作为纳米化学传感器的基础材料. 能带结构计算表明,无论是扶手形条带还是锯齿形条带,它们都是具有带隙的半导体,且无氢化条带的带隙要比氢化的条带带隙宽度大,氢化对于条带的电子性质具有显著修饰作用. 通过锯齿形石墨纳米条带顺磁性、铁磁性和反铁磁性的计算,发现反铁磁的状态最稳定,并且边缘磁性最强,这有利于条带在自旋电子器件中的应用. 关键词： 石墨纳米条带 成键机理 电子结构 自旋分布     

外加横向电场作用下石墨烯纳米带电子结构的密度泛函紧束缚计算

采用基于密度泛函理论的紧束缚方法计算研究了外加横向电场对边缘未加氢/加氢钝化的扶手椅型石墨烯纳米带的电子结构及电子布居数的影响.计算结果表明,石墨烯纳米带的能隙变化受其宽带影响.当施加沿其宽度方向的横向外加电场时,纳米带的能带结构及态密度都会产生较大的变化.对于具有半导体性的边缘未加氢纳米带,随着所施加电场强度的增加,...     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.