Preparation and thermal properties of chemically prepared nanoporous silica aerogels

This work focuses on the dependence preparation conditions—structure—physical properties of hydrophobic silica aerogels, all of them prepared under subcritical drying conditions (70 °C and 0.4 atm.), thus aiming at potential application as case insulation filling in heat pumps. The so prepared, millimeter scaled nano-porous hydrophobic silica aerogel granules were analyzed with standard electron microscope and atomic force microscopy, IR spectroscopy, UV/Vis spectroscopy, differential scanning calorimetry and thermal conductivity measurements. The physical properties of the aerogels were compared with commercial aerogel granules. A method for contact angle measurement of micro-droplets situated on the silica granules was proposed to quantify the level of their hydrophobicity.     

Supercritical CO2 drying of pure silica aerogels: effect of drying time on textural properties of nanoporous silica aerogels

Journal of Sol-Gel Science and Technology - Aerogel technologies provide high-performance lightweight materials with unique textural characteristics such as high specific surface area and open...     

Production of highly aligned microfiber bundles from polymethyl methacrylate via stable jet electrospinning for organic solid-state lasers

The fabrication of micron-sized poly(methyl methacrylate) (PMMA) polymer optical fibers doped with rhodamine B as an organic dye is demonstrated. Highly aligned and defect-free fibers are fabricated by using the stable jet electrospinning (SJES) method and systematically varying critical parameters such as solvent type and polymer concentration. At optimal conditions, for example, a polymer concentration of 35 wt% of PMMA in butanone, ribbon-shaped fibers with a smooth surface and diameter of about 20 μm could be spun using SJES mode and deposited on a rotating drum as target in a highly aligned manner. Photoluminescence spectra of the doped fibers excited longitudinally and transversely with a laser show an excitation peak with full-width-at-half-maximum of only 5.05 nm and a low lasing threshold at a pump energy of 0.55 μJ, indicating that SJES could become a new source of amplified optics components or organic solid-state fiber lasers.     

Synthesis, structure, and physical properties of hybrid nanocomposites for solid-state dye lasers

We report on the synthesis, structural characterization, physical properties, and lasing action of two organic dyes, Rhodamine 6G (Rh6G) and Pyrromethene 597 (PM597), incorporated into new hybrid organic-inorganic materials, where the organic component was either poly(2-hydroxyethyl-methacrylate) (PHEMA) or copolymers of HEMA with methyl methacrylate (MMA), and the inorganic counterpart consisted of silica derived from hydrolysis-condensation of methyltriethoxysilane (TRIEOS) in weight proportion of up to 30%. Lasing efficiencies of up 23% and high photostabilities, with no sign of degradation in the initial laser output after 100 000 pump pulses at 10 Hz, were demonstrated when pumping the samples transversely at 534 nm with 5.5 mJ/pulse. A direct relationship could be established between the structure of the hybrid materials, analyzed by solid-state NMR, and their laser behavior. An inorganic network dominated by di-/tri- substituted silicates in a proportion approximately 35:65, corresponding to samples of HEMA with 15 and 20 wt % proportion of TRIEOS, optimizes the lasing photostability. The thermal properties of these materials, together with the high homogeneity revealed by atomic force microscopy (AFM) images, even in compounds with high silica content, indicate their microstructure to be a continuous phase, corresponding to the polymer matrix, which "traps" the silica components at molecular level via covalent bonding, with few or no silica islands.     

Dialkylaminopyridine-functionalized mesoporous silica nanosphere as an efficient and highly stable heterogeneous nucleophilic catalyst

A new nucleophilic catalytic system comprised of dialkylaminopyridine-functionalized mesoporous silica nanosphere (DMAP-MSN) has been synthesized and characterized. We have demonstrated that this material is an efficient heterogeneous catalyst for Baylis-Hillman, acylation, and silylation reactions with good reactivity, product selectivity, and recyclability. We envision that this DMAP-functionalized mesoporous silica material can also serve as an effective heterogeneous catalyst for many other catalytic nucleophilic reactions.     

Highly stable gel electrolytes for dye solar cells based on chemically engineered polymethacrylic hosts

Four different species of ionically conductive polymers were synthesized and successfully implemented to formulate novel quasi-solid electrolytes for dye solar cells. A power conversion efficiency superior to 85% of the correspondent liquid electrolyte as well as an excellent cell's stability was demonstrated after 500 days of storage.     

Hybrid materials for solid-state dye laser applications

The quest for a solid-state tunable dye laser can be satisfied by sol-gel prepared organic-inorganic hybrids. A photostability study of porous silica-Rhodamine 6G hybrids prepared via a sol-gel method is presented. The dye molecules can be incorporated into the silica matrix by forming weak or covalent bonds (hybrids of classes I and II, respectively). New class II samples and traditional class I materials prepared by the pre-doping method were synthesized. Samples were characterized by photoluminescence measurements to compare the emission properties and the photostability of the samples. The decay of the fluorescence signal as the cumulative excitation energy increases is reported and interpreted by hypothesizing that the dye molecules can be hosted in different surroundings within the porous glass matrix. The reported photoluminescence and photobleaching features indicate the class II samples as good candidates for solid-state dye lasers.     

Porous texture of silica aerogels made with ionic liquids as gelation catalysts

The effect of four ionic liquids on the porous texture of silica aerogels synthesized from mixed tetramethoxysilane and methyltrimethoxysilane and dried by the CO₂ supercritical method, was studied. Two of these ionic liquids were composed of BF₄ ⁻ anions while the other two included Cl⁻ anions. The synthesis of gels from ionic liquids did not require another acidic catalyst for silica hydrolysis, nor a basic catalyst for silica condensation. These aerogels were compared with traditional aerogels made according to a double step catalysis, which first involved hydrolysis with HCl followed by condensation with pH 9 Tris HCl buffer. Gel mass analysis and thermogravimetric data showed that, when the initial molar of ionic liquid to Si was 1.58, only ~2% (by mass) of the initial ionic liquids consisting of BF₄ ⁻ anions and ~10% (by mass) of ionic liquids containing Cl⁻ anions, remained in the aerogels after supercritical drying. Moreover, X-ray diffraction confirmed that in ionic liquids based on BF₄ ⁻ anions, evaporation of the volatile components before supercritical CO₂ drying led to the formation of regularly ordered mesopores.     

KOH catalysed preparation of activated carbon aerogels for dye adsorption

Surfactants prevent the irreversible aggregation of partially refolded proteins, and they are also known to assist in protein refolding. A novel approach to protein refolding that utilizes a pair of low molecular weight folding assistants, a detergent and cyclodextrin, was proposed by Rozema and Gellman (D. Rozema, S.H. Gellman, J. Am. Chem. Soc. 117 (1995) 2373). We report the refolding of bovine serum albumin (BSA) assisted by these artificial chaperones, utilizing gemini surfactants for the first time. A combination of cationic gemini surfactants, bis(cetyldimethylammonium)pentane dibromide (C(16)H(33)(CH(3))(2)N(+)-(CH(2))(5)-N(+)(CH(3))(2)C(16)H(33)·2Br(-) designated as G5 and bis(cetyldimethylammonium)hexane dibromide (C(16)H(33)(CH(3))(2)N(+)-(CH(2))(6)-N(+)(CH(3))(2)C(16)H(33)·2Br(-) designated as G6 and cyclodextrins, was used to refold guanidinium chloride (GdCl) denatured BSA in the artificial chaperone assisted two step method. The single chain cationic surfactant cetyltrimethylammonium bromide (CTAB) was used for comparative studies. The studies were carried out in an aqueous medium at pH 7.0 using circular dichroism, dynamic light scattering and ANS binding studies. The denatured BSA was found to get refolded by very small concentrations of gemini surfactant at which the single chain counterpart was found to be ineffective. Different from the single chain surfactant, the gemini surfactants exhibit much stronger electrostatic and hydrophobic interactions with the protein and are thus effective at much lower concentrations. Based on the present study it is expected that gemini surfactants may prove useful in the protein refolding operations and may thus be effectively employed to circumvent the problem of misfolding and aggregation.     

Non-surfactant synthesis of mesoporous silica with dye as template

A novel non-suffactant method was described to synthesize mesoporous silica using dye basic fuchsin as template.Chemical reactions were introduced into the formation of mesopores rather than the weak electrostatic or hydrogen-bonding interactions in the traditional surfactant routes.The reactant composition was found to be crucial to the pore structure of objective product.The formation mechanism of mesopore was also proved.     

Development of highly fluorescent silica nanoparticles chemically doped with organic dye for sensitive DNA microarray detection

Increasing the sensitivity in DNA microarray hybridization can significantly enhance the capability of microarray technology for a wide range of research and clinical diagnostic applications, especially for those with limited sample biomass. To address this issue, using reverse microemulsion method and surface chemistry, a novel class of homogenous, photostable, highly fluorescent streptavidin-functionalized silica nanoparticles was developed, in which Alexa Fluor 647 (AF647) molecules were covalently embedded. The coating of bovine serum albumin on the resultant fluorescent particles can greatly eliminate nonspecific background signal interference. The thus-synthesized fluorescent nanoparticles can specifically recognize biotin-labeled target DNA hybridized to the microarray via streptavidin–biotin interaction. The response of this DNA microarray technology exhibited a linear range within 0.2 to 10 pM complementary DNA and limit of detection of 0.1 pM, enhancing microarray hybridization sensitivity over tenfold. This promising technology may be potentially applied to other binding events such as specific interactions between proteins.     

Calorimetric study of phase transitions for octylphenylthiolpentyloxybenzoate in silica aerogels

An a.c. calorimetric study has been carried out on octylphenylthiolpentyloxybenzoate (8S5) in three silica aerogels with mass densities rho 0.08, 0.17 and 0.36g cm . Results for the least porous aerogel (rho 0.36) are completely consistent with those reported previously for 8CB in the same aerogel. Freezing of 8S5 damaged the more porous rho 0.08 and 0.17 aerogels by creating internal voids and cracks that are large compared with the intrinsic pore size. As a result, overlapping sharp bulk-like Cp features and rounded features due to 8S5 in residual aerogel pores were observed, and no quantitative separation of these features could be achieved. 3     

Novel ion-imprinted polymer coated on nanoporous silica as a highly selective sorbent for the extraction of ultratrace quantities of gold ions from mine stone samples

We have developed a gold ion-imprinted polymer (GIP) by incorporating a dipyridyl ligand into an ethylene glycol dimethacrylate matrix which then was coated onto porous silica particles. The material was used for the selective extraction of ultratrace quantities of gold ion from mine stones, this followed by its quantitation by FAAS. The effects of concentration and volume of eluent, pH of the solution, flow rates of sample and eluent, and effect of potentially interfering ions, especially palladium and platinum, was investigated. The limit of detection is <0.2 ng?mL^?1, the precision (RSD%) is 1.03 %, and recoveries are >99 %. In order to show the high selectivity and efficiency of the new sorbent, the results were compared to those obtained with more simple sorbents possessing the same functional groups. The accuracy of the method was demonstrated by the accurate determination of gold ions in a certified reference material. To the best of our knowledge, there is no report so far on an imprint for gold ions that has such a selectivity over Pd(II) and Pt(II) ions.

Hemicyanine dye as a surfactant for the synthesis of bicontinuous cubic mesostructured silica

In this paper, we developed a facile way to synthesize highly ordered optically active MCM-48 at room temperature, by using mixtures of hemicyanine dye N-alkyl-2-[p-(N,N-diethylamino)-o-(alkyloxy)]pyridinium bromide (denoted as o-CnPOCm, Scheme 1) and cetyltrimethylammonium bromide (CTAB) as the structure-directing agents. The mesoporous materials were systematically characterized by powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and thermogravimetry. The resultant MCM-48 exhibits unusually high thermal stability. For example, in the case of o-C(2)POC(14), it can retain its cubic structure even under calcinations at 900 degrees C for 5 h, although the pore size is shifted to the micropore region because of shrinkage of the framework. The typical surface area and pore volume are 980 m(2)/g and 0.44 cm(3)/g, respectively, for the powder calcined under such a high temperature. This is the first report of room-temperature synthesis of MCM-48 with such good thermal stability using cationic-cationic mixed surfactant as the structure-directing agent. The fluorescence lifetimes of the as-synthesized mesostructured MCM-48 were also measured, and the result showed that the incorporated dye molecules have a 1 order of magnitude longer lifetime than that of free species in solution, showing that the hemicyanine dye molecules are well dispersed within the CTAB surfactant matrix. Furthermore, we compared eight other dye congeners (Scheme 1) to fully investigate the mesophase resulting from the dye-CTAB system. The results show that, upon addition of the dye surfactant to the starting mixtures, the mesostructured silica undergoes an intrinsic phase-transition process; however, specific dye geometry is required to obtain MCM-48 at room temperature. Those functionalities as well as the designed synthesis of this novel mesostructured MCM-48 material promise a bright future in multifunctional optical and electric nano- and microdevices (e.g., waveguides, laser, light-emitting diodes, etc.) and also shed light on the self-assembly behavior in complex colloidal system.     

Immobilized polyoxometalates onto mesoporous organically-modified silica aerogels as selective heterogeneous catalysts of anthracene oxidation

Immobilized molybdovanadophosphoric acids onto organically surface-modified silica aerogels were successfully prepared and investigated in heterogeneous catalysis of anthracene oxidation. The catalysts were obtained by supporting mono- and di-vanadium substituted molybdophosphoric acids on hybrid silica materials synthesized via the sol–gel process followed by surface amino-functionalization. The FTIR, DR UV–vis, and AA spectroscopy confirmed the loading and distribution of the polyoxometalate molecules on the surface of the aerogels. The nitrogen adsorption–desorption technique revealed a systematic decrease in the specific surface area and pore volume after the immobilization of the polyoxometalates. The application of the supported molecules as catalysts for anthracene oxidation showed 100% selectivity for 9,10-anthraquinone as opposed to the reactions conducted under homogeneous conditions. Moreover, at certain conditions, the catalytic activity of the supported polyoxometalates was greater than their corresponding free polyoxometalates with a clear effect of the surface chemical groups of the supporting silica aerogels. Additionally, the oxidant and solvent nature showed a crucial effect on the catalytic activity and selectivity of the immobilized polyoxometales. The heterogeneous catalysts were regenerated and reused over consecutive catalytic cycles reflecting a potential economic interest in these materials besides their high efficiency in heterogeneous catalysis.     

Preparation of hexagonal platy particles of nanoporous silica using hydrotalcite as morphology template

Hexagonal platy composite particles with a hydrotalcite core and a nanoporous silica shell with a thickness of ca. 100 nm were synthesized by the reaction of a Mg-Al hydrotalcite with a homogeneous aqueous solution containing tetraethoxysilane, hexadecyltrimethylammonium chloride, ammonia and methanol at 3 degrees C. The calcination of the products at 500 degrees C in air led to the composite particle with a Mg/Al mixed oxide core and a nanoporous silica shell. Hexagonal platy particles of nanoporous silica with a pore diameter of 2.3 nm and BET surface area of 700 m(2) (g of silica)(-1) were obtained by removing the Mg/Al mixed oxide core.