Speciation analysis of selenium in rice samples by using capillary electrophoresis-inductively coupled plasma mass spectrometry

An enzyme-assisted extraction used to extract all species of selenium in rice sample and a sensitive analytical method for the determination of ultratrace Se(VI), Se(IV), SeCys₂ (selenocystine) and SeMet (selenomethionine) with capillary electrophoresis-inductively coupled plasma mass spectrometry were firstly described in this study. The extraction method is simple, effective and can be used to extract trace selenium compounds in rice with high extraction efficiency and no altering its species. The analytical method has a detection limit of 0.1-0.9 ng Se/mL, and can be used to determine trace Se(VI), Se(IV), SeCys₂ and SeMet in rice directly without any derivatization and pre-concentration. With the help of above methods, we have successfully determined Se(VI), Se(IV), SeCys₂ and SeMet in selenium-enriched rice within 18 min with a recovery of 90-103% and a RSD (relative standard deviation, n = 6) of 3-7%. Our results indicated that selenium-enriched rice contained only one species of selenium, SeMet, and its concentration is in range of 0.136-0.143 μg Se/g dried weight. The proposed method providing a realistic approach for the nutritional and toxical evaluation of different selenium compounds in nutritional supplements.     

Capabilities of mixed-mode liquid chromatography coupled to inductively coupled plasma mass spectrometry for the simultaneous speciation analysis of inorganic and organically-bound selenium

This work investigates for the first time the potential of mixed-mode (anion-exchange with reversed-phase) high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (ICP-MS) for the simultaneous retention and selective separation of a range of inorganic and organically-bound selenium (Se) species. Baseline separation and detection of selenocystine (SeCys₂), Se-methyl-selenocysteine (SeMC), selenomethionine (SeMet), methylseleninic acid (MSA), selenite, γ-glutamyl-methyl-selenocysteine (γ-glutamyl-SeMC), and selenate in a Se standard mixture by mixed-mode HPLC-ICP-MS was achieved by switching between two citrate mobile phases of different pH and ionic strength within a single chromatographic run of 20 min. Limits of detection obtained for these Se species ranged from 80 ng kg^?1 (for SeMC) to 123 ng kg^?1 (for selenate). Using this approach as developed for selenium speciation, an adequate separation of inorganic and organic As compounds was also achieved. These include arsenite, arsenate, arsenobetaine (AsB) and dimethylarsenic acid (DMA), which may coexist with Se species in biological samples. Application of the newly proposed methodology to the investigation of the elemental species distribution in watercress (used as the model sample) after enzymatic hydrolysis or leaching in water by accelerated solvent extraction (ASE) was addressed. Only SeMet, SeMC and selenate could be tentatively identified in watercress extracts by mixed-mode HPLC-ICP-MS and retention time matching with standards. Recoveries (n = 3) of these Se species from samples spiked with standards averaged 102% (for SeMC), 94.9% (for SeMet) and 98.3% (for selenate). Verification of the presence of SeMet and SeMC in an enzymatic watercress extract was achieved by on-line HPLC-ESI MS/MS in selected reaction monitoring (SRM) mode.     

Selenium speciation in cow milk obtained after supplementation with different selenium forms to the cow feed using liquid chromatography coupled with hydride generation-atomic fluorescence spectrometry

The purpose of this paper is to develop an easy and quick on-line selenium speciation method (LC-UV-HG-AFS) in cow milk obtained after different supplementation to cow feed. This study focuses on selenium speciation in cow milk after the use of different selenium species (organic selenium as selenised yeast and inorganic selenium as sodium selenite) in the supplementation of forages. Separation was carried out on a μBondapack C₁₈ column with the positively charged ion-pairing agent tetraethylammonium chloride in the mobile phase. The optimization of pre-reduction conditions was carried out; this step was done with UV irradiation and a heating block to improve the reduction of the different Se-compounds. Variables such as exposure time, hydrochloric acid concentration and temperature were studied. The detection limits for SeCyst₂, Se(IV), SeMet and Se(VI) were 0.4, 0.5, 0.9 and 1.0 μg l⁻¹, respectively. The proposed method was applied to cow milk samples. The milk samples obtained after an organic supplementation of feeding as selenised yeast present three species of selenium, SeCyst2, Se(IV) and SeMet, while only SeCyst2 and Se(IV) are present in milk samples obtained after an inorganic supplementation of feeding.     

Speciation of selenomethionine and selenocystine using online micro-column containing Cu(II) loaded nanometer-sized Al2O3 coupled with ICP-MS detection

A flow injection online speciation procedure by using micro-column packed with Cu(II) loaded nanometer-sized Al₂O₃ coupled to inductively coupled plasma mass spectrometry (ICP-MS) for the separation and determination of selenomethionine (SeMet) and selenocystine (SeCys₂) has been developed. The main factors affecting the separation and preconcentration of SeMet and SeCys₂ including pH value, sample flow rate, eluent concentration, eluent volume and flow rate, and interfering ions have been investigated. It was found that SeCys₂ could be selectively retained by micro-column packed with Cu(II) loaded nanometer-sized Al₂O₃ at pH 4.0, and the retained SeCys₂ could be eluted by 1.0 mol L⁻¹ HNO₃, while SeMet was not retained and passed through the micro-column directly at this pH. Both SeMet and SeCys₂ could be quantitatively adsorbed by the micro-column at pH 9.0, and the retained SeMet and SeCys₂ could be easily eluted with 1.0 mol L⁻¹ HNO₃. The content of SeMet was obtained by subtracting the SeCys₂ from the total content of seleno amino acids. With the enrichment factor of 7.8 and 7.7, the limits of detection (LODs) for SeMet and SeCys₂ were found to be 24 pg Se mL⁻¹ and 21 pg Se mL⁻¹, respectively. The relative standard deviations (RSDs) for SeCys₂ and SeMet with seven replicate determinations of 1.0 ng mL⁻¹ SeMet and SeCys₂, were 2.1% and 1.6%, respectively, the sampling frequency of 8 h⁻¹ was obtained. The proposed method was applied to the speciation of SeMet and SeCys₂ in selenized yeast, human urine and serum with satisfactory results.     

Determination of selenium species in plant leaves by HPLC-UV-HG-AFS

The purpose of this work was the development of a method for the determination of Se compounds in leaves of plants. Water-soluble Se compounds were extracted from samples by water. Enzymatic hydrolysis with the non-specific enzyme protease XIV was used for the release of Se compounds bound to proteins. Separation of Se species was made by ion exchange chromatography, using an anion exchange column for Se^IV, Se^VI and selenomethionine (SeMet), and a cation exchange column for selenomethylselenocysteine (SeMeSeCys) and selenocystine (SeCys₂). Columns were connected “on line” to a hydride generation atomic fluorescence spectrometer (HG-AFS) using a UV lamp between the separation and detection system. The repeatability of the results obtained by the developed method was under 15% (R.S.D.) for all Se species; the detection limit was 2-10 ng Se/g of supernatant. The accuracy was checked by comparison with some literature data for reference materials since there were no suitable certified reference materials available. The method was used for the determination of Se compounds in chicory (Cichorium intybus L.) leaves from plants which were cultivated aeroponically with elevated concentrations of Na₂SeO₄ for different periods. Se accumulated efficiently in chicory leaves; up to 480 μg/g after 41 days of exposure, mostly (64%) as Se^VI, i.e. in the form of Se added. Beside inorganic Se, in the extracts from enzyme hydrolysis we also found SeMet (4.2-8.4%) and SeMeSeCys (<DL−0.7%). Some unidentified peaks were also observed in the chromatograms of plant extracts.     

Sequential photocatalyst-assisted digestion and vapor generation device coupled with anion exchange chromatography and inductively coupled plasma mass spectrometry for speciation analysis of selenium species in biological samples

We have developed an on-line sequential photocatalyst-assisted digestion and vaporization device (SPADVD), which operates through the nano-TiO₂-catalyzed photo-oxidation and reduction of selenium (Se) species, for coupling between anion exchange chromatography (LC) and inductively coupled plasma mass spectrometry (ICP-MS) systems to provide a simple and sensitive hyphenated method for the speciation analysis of Se species without the need for conventional chemical digestion and vaporization techniques. Because our proposed on-line SPADVD allows both organic and inorganic Se species in the column effluent to be converted on-line into volatile Se products, which are then measured directly through ICP-MS, the complexity of the procedure and the probability of contamination arising from the use of additional chemicals are both low. Under the optimized conditions for SPADVD – using 1 g of nano-TiO₂ per liter, at pH 3, and illuminating for 80 s – we found that Se(IV), Se(VI), and selenomethionine (SeMet) were all converted quantitatively into volatile Se products. In addition, because the digestion and vaporization efficiencies of all the tested selenicals were improved when using our proposed on-line LC/SPADVD/ICP-MS system, the detection limits for Se(IV), Se(VI), and SeMet were all in the nanogram-per-liter range (based on 3σ). A series of validation experiments – analysis of neat and spiked extracted samples – indicated that our proposed methods could be applied satisfactorily to the speciation analysis of organic and inorganic Se species in the extracts of Se-enriched supplements.     

液相色谱-双通道原子荧光检测联用法同时测定砷和硒的形态

建立了一种利用高效液相色谱-双通道原子荧光检测联用同时进行砷和硒形态分析的方法。以10 mmol/L NH4H2PO4溶液(pH 5.6)(添加2.5%(体积分数)的甲醇)为流动相,在12 min内同时分离了三价砷(As(III))、一甲基砷(MMA)、二甲基砷(DMA)、五价砷(As(V))、硒代胱氨酸(SeCys)、硒代蛋氨酸(SeMet)和四价硒［Se(IV)］等化合物。As(III)、DMA、MMA、As(V)、SeCys、SeMet和Se(IV)的检出限分别为1,3,2,3,4,18和3 μg/L (进样量为200 μL),5次测定的相对标准偏差为1.9%～6.1%(As 100 μg/L, Se 300 μg/L)。应用该方法对人体尿样及硒酵母片中砷和硒的形态进行了分析,目标物在尿样中的加标回收率为83%～108%,在硒酵母片中的加标回收率为88%～105%。实验结果表明,该方法可用于尿样及药品中砷和硒形态的日常分析。该方法减少了样品的分析时间和试剂用量,降低了工作强度,提高了工作效率。     

Volatile organo-selenium speciation in biological matter by solid phase microextraction-moderate temperature multicapillary gas chromatography with microwave induced plasma atomic emission spectrometry detection

Microwave induced plasma atomic emission spectrometry (MIP-AES) in combination with multicapillary (MC) gas chromatography could be proven to be useful for element specific detection of volatile species. Solid phase microextraction (SPME) was used for preconcentration and sample-matrix separation. The fiber desorption unit as well as the heating control for the MC column were in-house developed and multicapillary column was operated at moderate temperatures (30-100 °C). The method was optimized for organo-selenium species (dimethylselenide (DMSe), diethylselenide (DEtSe) and dimethyldiselenide (DMDSe)), using a chemometric approach. Stationary phases for the separation column were optimized using a conventional GC and contrasted with the results obtained with the MC. Application was focussed on selenium accumulating biological matter, such as lupine, yeast, Indian mustard and garlic. These samples were grown in hydroponic solution containing inorganic selenium (Na₂SeO₃ and Na₂SeO₄). SPME sampling was carried out in fixed volume flow boxes in headspace above the living plants and in vials using treated samples. Results demonstrate inorganic selenium transformation into volatile organic species during metabolism. Separation is fast, a chromatogram can be obtained in less than 3 min and detection limits were at sub-ppb level for all investigated species. The system is independent from the use of a conventional gas chromatographic oven and can be used as a versatile alternative to highly cost intensive methods such as GC-ICP-MS.     

Stability of Se species in plant extracts rich in phenolic substances

Since there is growing awareness of the strong dependence of the antioxidative function of selenium (Se) upon its chemical form, the stability of Se species during sample preparation is an important factor in obtaining qualitative and quantitative results. Many plant samples are rich in phenolic compounds (antioxidants), but data about their effect on specific Se species in extracts of plant samples are scarce. Therefore, the aim of this study was to investigate the effect of the most common phenolic substances in plant parts, namely tannin and the flavonoid rutin, on the concentration and/or transformation of several Se species (SeMet, SeCys₂, SeMeSeCys, Se(VI) and Se(IV)) during sample preparation (24 h incubation at 37 °C) and storage (4 days at 4 °C). Moreover, the effect observed was then studied in a real sample, buckwheat, because this plant is known as a rich source of phenolics, especially tannin and rutin. Se speciation was carried out by on-line coupling of ion-exchange HPLC-ICP-MS after water and enzymatic (protease) hydrolysis. The results showed that the ratio between the two antioxidants has an important role. When the antioxidants were present together, the response for Se(IV) was observed to start to decrease only at a ratio of rutin to tannin of 1:100 (w/w), indicating the ratio between antioxidants in buckwheat seeds. After water extraction, only 40% and after enzymatic extraction 80% of Se(IV) remained, but no other Se compound was detected with the system used. Furthermore, the extracts were not stable during storage at 4 °C. Signals for other Se species were stable. The results obtained for buckwheat seeds showed a decrease in Se(IV) response during sample preparation and storage, comparable to the one obtained with the experiments performed in vitro. However, Se species in extracts of other buckwheat parts (leaves, stems and sprouts) were stable. These results indicate that reactions in the extraction process and during storage may affect Se speciation and may result in misidentifications and inaccurate values.     

Interaction of arsenic and selenium on the metabolism of these elements in hamsters

The interaction of arsenic and selenium compounds on the metabolism of these elements in golden hamsters was studied. Golden hamsters were divided into three groups and administered sodium selenite (Na₂SeO₃), sodium arsenite (NaAsO₂) and Na₂SeO₃ with NaAsO₂, respectively, by a single Subcutaneous injection of 25 m?mol kg^?1 body weight as As or Se (arsenic and selenium were calculated as weight of elemental arsenic and selenium). Selenium and arsenic metabolites were determined by high-performance liquid chromatography–graphite furnace atomic absorption spectrometry (HPLC–GFA AA) and gas chromatography (GC). The results show (1): About 10% by weight of the given dose of selenium was excreted in expiration air as dimethylselenide (Me₂Se) during 12 h after administration of Na₂SeO₃. Excretion of dimethylselenide with the respiratory air was inhibited by administration of Na₂SeO₃ simultaneously with NaAsO₂. (2) Giving Na₂SeO₃ plus NaAsO₂ had no appreciable effect on the excretion of the trimethylselenonium ion (Me₃Se⁺) into the urine and the feces. (3) Giving Na₂SeO₃ plus NaAsO₂ increaed the excretion into the feces of an insoluble unknown-structure selenium compound, the proportion of which was 10.9% by weight of the given dose of selenium. (4) Giving NaAsO₂ plus Na₂SeO₃ decreased the excretion of dimethylarsinic acid (Me₂AsOOH) and inorganic arsenic into the urine during 120 h after the administration of the reagents, the decreased amount being 5.3% (dimethylarsinic acid) and 7.7% (inorganic arsenic) of the given dose of arsenic, respectively. (5) Giving NaAsO₂ plus Na₂SeO₃ increased the excretion into feces of insoluble unknown-structure arsenic compound and inorganic arsenic, the increased amounts being 10.6% and 7.0% of the given dose of arsenic, respectively. (6) Giving NaAsO₂ plus Na₂SeO₃ decreased the excretion into feces of extractable unknown-structure arsenic compound, and the decreased amount was 4.9% of the given dose of arsenic. (7) It made little difference to the excretion of monomethylarsonic acid [MeAsO(OH)₂] into urine and feces and of dimethylarsinic acid (Me₂AsOOH) into feces whether NaAsO₂ was administered alone or with Na₂SeO₃.     

Use of INAA to study the effect of selenium on uranium accumulation in cells of saccharomyces cerevisiae

Differences in the effects of seleno-cystine (CySe)₂ and inorganic Se(IV) and Se(VI) compounds on uranium(VI) uptake by yeast cells, Saccharomyces cerevisiae have been studied. The Se, U, Zn and Co levels of the yeast cells were measured by neutron activation analysis. An increase in the concentration of U cells within the first 2 hours of incubation was produced by the presence of SeO₂ (2·10^–4–5·10^–4M) and (CySe)₂ (1·10^–4M) in the yeast medium. Moreover, the highest SeO₂ concentration (5·10^–4M) and (CySe)₂ more efficiently enhanced the U content of the cells than SeO₂ at the low concentration end (2·10^–4M). However, the effect of SeO₂ and (CySe)₂ on U uptake diminishes with incubation time (from 2 to 48 hours). Se(VI) [as (NH₄)₂SeO₄] leads to a marked decrease in the content of uranium in Saccharomyces cerevisiae (an antagonistic interaction). As expected, uranium uptake by the yeast influence the retention of selenium in the cells. Uranium significantly increased the uptake yield of Se by Saccharomyces cerevisiae when the yeast was incubated in the medium containing (CySe)₂. Furthermore, during the initial 24 hours of the incubation an increase of the Se content of the cells in the presence of U was observed when Se(VI) was in the culture medium. Selenium and uranium dosages affected the Zn and Co contents of cells.     

Application of photochemical reactions of Se in natural waters by hydride generation atomic fluorescence spectrometry

A simple, sensitive and accurate method for selenium speciation in natural waters is proposed. The principle of this method is based on recently discovered photochemical reactions of Se(IV) and organic selenium in different aqueous solutions. The speciation of all selenium species was performed with hydride generation-atomic fluorescence spectrometry. Only one pre-reduction step is needed in this procedure, which can greatly reduce the risk of contamination, minimize the analytical work and improve the quality of selenium speciation. In this paper, a comparison is made between the proposed method and a previous method [A.G. Cutter, Anal. Chim. Acta 98 (1978) 59]. In this proposed protocol, Se(IV) was directly measured in 3.0 M HCl. Se(IV) + org-Se was measured directly after a UV irradiation (300 nm) for 2.5 h in a 1.0% (v/v) HNO₃-2.0% (v/v) HCl matrix. Total selenium was obtained in another aliquot sample after a UV irradiation in the 3.0 M HCl. No pre-concentration, separation or more sophisticated instruments are required.     

Selenite and Selenate Speciation in Natural Waters: Interaction with Divalent Metal Ions

Selenium is a trace element of environmental relevance. Studies on its solution chemistry are scarce and were mostly carried out under experimental conditions of little relevance to environmental research. Thus, we have performed new studies of selenium speciation in solutions of low ionic strength, in contrast to those prevailing in the literature data. In this work, potentiometric titrations (at 20.0 °C, and I=0.15 mol⋅L⁻¹ NaClO₄) were carried out for systems containing Se(VI) or Se(IV) oxyanions and divalent metal ions (Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg, and Pb). Ion pairs such as [M(SeO₄)] and [M(HSeO₄)₂], or [M(HSeO₃)]⁺ and [M(SeO₃)], exist in solutions. The data reported here provide the basis for determining selenium speciation in natural aquatic systems, on which the bioavailability and toxicity of this element depends.     

Determination of selenomethionine, selenocysteine, and inorganic selenium in eggs by HPLC–inductively coupled plasma mass spectrometry

A method for the simultaneous determination of selenomethionine (SeMet), selenocysteine (SeCys), and selenite [Se(IV)] in chicken eggs was developed. A sample preparation protocol including defatting, protein denaturation, and carbamidomethylation was optimized in order to achieve complete protein digestion and to avoid SeCys losses. Quantification was carried out by reversed-phase HPLC–inductively coupled plasma mass spectrometry (ICP MS) after quantitative isolation of the selenium-containing fraction by size-exclusion liquid chromatography. The detection limits were 0.06, 0.003, and 0.01 μg g⁻¹ (dry weight) for SeCys, Se(IV) and SeMet, respectively, and the precision was 5–10%. The end products of carbamidomethylation of the different selenium species were identified for the first time by electrospray QTOF MS after custom-designed 2D HPLC purification. Differences in selenium speciation in egg yolk and white were highlighted, the yolk containing more SeCys and the white more SeMet. An insight into selenium bioaccessibility in eggs was obtained by digestion with simulated gastric and gastrointestinal juices and size-exclusion HPLC-ICP MS.     

Selenium and mercury bioaccessibility in fish samples: an in vitro digestion method

The assessment of hazard from selenium (Se) and mercury (Hg) contaminants in the food chain based on their potential bioaccessibility and on estimate of their actual content in fish is reported under an in vitro model. Atomic fluorescence spectroscopy (AFS) was applied for total selenium and mercury quantification. Selenium and mercury bioaccessibility varied depending on the type of fish analyzed. Se solubility in the gastrointestinal supernatants was higher in swordfish and sardine (76 and 83%, respectively) than in tuna (50%). A low Hg bioaccessibility (9-17%) was found for all the samples.Simulated human gastric and intestinal digestion led to the identification of selenomethionine (SeMet) and organic mercury in the three digested fish. Furthermore, these species were not modified during the digestion. Speciation of selenium compounds was done by liquid chromatography in conjunction with inductively coupled plasma mass spectrometry (LC-ICP-MS).Sardine had the most favorable Se:Hg, [Se:Hg]_{bioaccessible} and [SeMet:Hg]_{bioaccessible} molar ratios, making it preferable to tuna and swordfish.The effect of cooking was also evaluated.     

Chemical characterization of short-lived selenium and their daughter isotopes from thermal neutron induced fission of 235U at a gas-jet facility

Selenium nuclides are available from thermal neutron induced nuclear fission of ²³⁵U at the gas-jet facility at the Swiss spallation neutron source (SINQ) at Paul Scherrer Institute, Switzerland. The formation of stable selenium compounds, their transport yields using the gas-jet system and their relative thermal decomposition temperature were investigated under oxidizing and reducing conditions in the target chamber. Using O₂, H₂, CO, and propene as additional gases, the selenium isotopes are suggested to form H₂SeO₃, H₂Se, COSe, and C₃H₆Se, respectively, with overall ⁸⁴Se yields of 1.5%, 4.7%, 6.3%, and 21.9%, respectively. Adsorption enthalpy, vapour pressure, solubility and acidity data for these species were collected from the literature or estimated from other known thermochemical properties. Carrier free bromine isotopes (⁸⁴Br, ⁸⁶Br) in the form of HOBr were obtained by thermally decomposing H₂SeO₃ and retaining elemental Se under oxygen rich conditions on quartz at 400 K.     

Sensitivities of selenite, selenate, selenomethionine and trimethylselenonium ion in aqueous solution and in blood plasma-ETAAS compared with ICP-MS

Aqueous solutions and blood plasma spiked with selenite (Se(IV)), selenate (Se(VI)), selenomethionine (SeMet) or trimethylselenonium (TMSe) iodide were analyzed by Zeeman-corrected electrothermal atomic absorption spectrometry (ETAAS) using palladium as a chemical modifier, and by inductively coupled plasma mass spectrometry (ICP-MS). Using ETAAS, the sensitivities for Se(IV), SeMet and TMSe in aqueous solution were similar, whereas the sensitivity of Se(VI) was 63% of that value. In blood plasma, the ETAAS sensitivities of Se(IV) and Se(VI) were equal, whereas the sensitivities of SeMet and TMSe were 87 and 56%, respectively, of that value. In contrast, the ICP-MS sensitivities obtained for Se(VI), TMSe and SeMet were between 96 and 98% of that obtained for Se(IV) in aqueous solution and in blood plasma. It is concluded, that ICP-MS is superior to ETAAS as the problem of differences in sensitivity of the selenium species when using ETAAS are not prevalent when using the ICP-MS technique.     

Speciation of selenium in selenium-enriched shiitake mushroom, Lentinula edodes

The major selenium compound in an aqueous extract of the most popular mushroom in Eastern Asian countries, shiitake (Lentinula edodes), fortified with selenium (Se) was identified by means of hyphenated techniques, i.e. HPLC-inductively coupled argon plasma mass spectrometry and HPLC-electrospray ionization mass spectrometry (HPLC–ICP MS and HPLC–ESI MS). Sixty-eight per cent of the total Se in the selenized shiitake was extracted with water, and 49.8% of the Se in the water extract was eluted in the high molecular mass fraction (>40,000 kDa) before incubation at 37 °C. After incubation, 40.6% of the Se in the water extract was eluted in a lower molecular mass fraction and the Se eluted in the high molecular mass fraction had decreased to 14.0%, suggesting that the major selenium compound in the water extract was initially in a form bound to macromolecule(s) and was then enzymatically liberated from the macromolecule(s). The retention time of the liberated selenium compound in HPLC–ICP MS matched that of selenomethionine (SeMet), and the masses of molecular and fragment ions detected by HPLC–ESI MS also suggested that the selenium compound was SeMet. The selenized shiitake accumulated Se as SeMet, and SeMet might be bound to the water extractable high molecular mass protein(s).Electronic Supplementary Material Supplementary material is available for this article at     

Characteristics of selenium in australian marine biota

The occurrence, distribution and speciation of selenium in Australian marine biota is discussed. Biochemical pathways for the accumulation of selenium by marine organisms are also postulated. Comparison of the levels of selenium in macroalgae, fish, crustaceans and molluscs indicates that preferential accumulation of selenium by particular taxa does not occur. Phaeophyta have significantly lower selenium concentrations than Rhodophyta and Chlorophyta. Fish have lower selenium contents in muscle tissues than molluscs and crustaceans. Marine animals with different dietary intake (planktonic vs herbivorous vs carnivorous) are not observed to have significantly different levels of selenium (P>0.05). Selenium in all the organisms studied was predominantly associated with free amino-acids or protein residues and was not present as characterizable inorganic selenium species (SeO₃^2?, SeO₄^2?). These results indicate that selenium is probably only incorporated into biota for specific biochemical purposes with any exces selenium being excreted or eliminated.     

Specific determination of selenoaminoacids in whole milk by 2D size-exclusion-ion-paring reversed phase high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP MS)

A procedure was developed for the quantitative recovery of selenomethionine (SeMet) and selenocysteine (SeCys) from whole milk. It was based on the protein unfolding, carbamidomethylation of the aminoacid residues using iodoacetamide and proteolysis using Protease XIV. The selenoaminoacids were specifically determined by ion-paring reversed phase HPLC-ICP MS after their isolation from the post-reaction mixture by size-exclusion LC. Se(IV) present in the sample was derivatized as well and was determined along with the selenoaminoacids. The origin and identity of species were identified by the co-elution with the Se(IV), isotopically labelled selenomethionine, and with the synthetic standard of carbamidomethylated selenocysteine. The method development for SeCys was assisted by using glutathione peroxidise as the SeCys standard. SeMet, SeCys and Se(IV) were quantified by the method of standard additions. The mass balance provided a measure of the method validation. The method was applied to monitoring selenium speciation during supplementation of cows (dose-effect study) with Se-rich yeast containing feed and during milk processing.