吡唑啉衍生物有机电致发光器件中激基复合物的发射

以两种吡唑啉衍生物为空穴传输材料(HTM)和BBOT为电子传输材料组成双层器件, 获得了相对于组成材料的荧光光谱红移和宽化的电致发光. 双层器件和HTM∶BBOT等摩尔混蒸薄膜的光致发光及电致发光测量表明, 该谱带来自HTM/BBOT界面激基复合物的发射, 根据器件的能级图, 激基复合物的类型为BBOT的激发态BBOT⁽与基态的HTM相互作用的复合物. 用HTM∶BBOT混合发光层增加器件中激基复合物的形成界面, 提高了器件的发射性能.     

蓝色磷光材料FIrpic的发光特性

研究了掺杂浓度及热退火对磷光材料双(4,6-二氟苯基吡啶-N,C2?)吡啶甲酰合铱(FIrpic)发光性能的影响.不同掺杂浓度的薄膜及有机电致发光器件(OELDs)的发光颜色都随FIrpic浓度的增大由蓝色逐渐变化到黄绿色.纯FIrpic薄膜的吸收光谱和光致发光(PL)光谱在440-480nm范围内有明显的光谱重叠,476nm处的发光强度随FIrpic掺杂浓度增大而降低主要是由自吸收效应引起的.测量了不同激发密度下的光致发光光谱和不同掺杂浓度下的电致发光(EL)光谱,发现530nm处的发光强度随激发强度或掺杂浓度的增大而增强,证实了530nm处的发光是来源于FIrpic分子间的激基缔合物发光.通过比较热退火前后薄膜微观形貌及电致发光器件光谱的变化,进一步证实了热退火促进FIrpic分子聚集,增强了FIrpic分子间的辐射跃迁发光.通过调控FIrpic掺杂浓度和优化器件结构,并对器件进行热退火处理得到一系列发光颜色从蓝色逐渐变化到黄绿色的有机电致发光器件.     

蓝色磷光材料Flrpic的发光特性

研究了掺杂浓度及热退火对磷光材料双(4,6-二氟苯基吡啶-N,C2’)吡啶甲酰合铱(Flrpic)发光性能的影响.不同掺杂浓度的薄膜及有机电致发光器件(OELDs)的发光颜色部随Flrpic浓度的增大由蓝色逐渐变化到黄绿色.纯Flrpic薄膜的吸收光谱和光致发光(PL)光谱在440-480 nm范围内有明显的光谱重叠,476 nm处的发光强度随Flrpic掺杂浓度增大而降低主要是由自吸收效应引起的.测量了不同激发密度下的光致发光光谱和不同掺杂浓度下的电致发光(EL)光谱,发现530 nm处的发光强度随激发强度或掺杂浓度的增大而增强,证实了530 nm处的发光是来源于Flrpic分子间的激基缔合物发光.通过比较热退火前后薄膜微观形貌及电致发光器件光谱的变化,进一步证实了热退火促进Flrpic分子聚集,增强了Flrpic分子间的辐射跃迁发光.通过调控Flrpic掺杂浓度和优化器件结构,并对器件进行热退火处理得到一系列发光颜色从蓝色逐渐变化到黄绿色的有机电致发光器件.     

阳离子荧光敏感器的器件化问题研究

通过对石英玻片表面修饰, 制作了联有多氨基链萘基的超薄膜荧光敏感器件, 研究了它在镍、铜等金属离子水溶液及有机溶剂中的荧光猝灭现象. 发现其荧光光谱无论在水或其他有机溶剂中都存在着单体和激基缔合物(ex-cimer)的发射峰, 当处于镍离子水溶液中时, 其单体峰随离子浓度的增大出现了先增强后减弱的现象, 而激基缔合物的发光峰则仅略有减弱但变化不大. 在铜离子水溶液中其荧光的变化情况和镍离子有所不同, 对单体荧光只能观察到强度减弱的趋势, 而激基缔合物则变化不大. 比较了未联结的敏感器化合物分子在有机溶剂中荧光被铜离子猝灭的行为, 发现与其在器件表面时有很大的差别, 表明其分子结构和构象也有很大的不同.     

芴酮对聚醚侧链聚芴体系的影响:合成,表征及光物理性质的研究

利用Yamamoto聚合反应, 通过调节单体2,7-二溴9,9'-二-(三乙氧基甲基)芴和2,7-二溴芴酮的比例, 合成了侧链为极性聚醚链, 芴酮含量逐渐增加的聚芴系列. 通过聚合物溶液及固态薄膜的紫外荧光谱图, 深入研究芴酮作为能量受体的能量转移过程及其对聚合物光物理性质的影响. 结果表明: 稀溶液中体系呈现聚芴本征态的荧光发射, 能量转移对溶液浓度具有依赖性; 固态薄膜中能量转移效率随芴酮含量的增加而快速增长, 退火后这种现象更加明显.     

用稳态和时间分辨光谱研究聚苊与对苯二甲酸二甲酯形成的三分子激基复合物

本文研究了聚苊与对苯二甲酸二甲酯形成的三分子激基复合物。提出了稀溶液柔性聚合链内形成三分子激基复合物的理论模型,推导了单分子荧光、激基复合物荧光和三分子荧光随时间的衰减符合双指数规律。估算了该体系中,激基复合物形成速度常数,k_3=6.0×10~9s~(-1)(mol/L)~(-1);三分子激基复合物形成速度常数,k_6=5.2×10~7s~(-1)。并从非晶态膜和分子内激基复合物的荧光寿命证明了三分子激基复合物的形成机理:     

单分散齐聚芴电致发光材料的合成及器件化

用Sonogash ira法合成了一系列含三键的齐聚芴,所有产物经核磁共振谱、质谱及元素分析表征确认.此类物质在溶液中及薄膜状态均发射出蓝紫或深蓝色荧光,荧光发射峰随聚合度增大依次红移.以这些物质为发光材料制作了相应的有机电致发光二极管(OLED),对器件的测试结果表明,所合成的齐聚芴具有优良的蓝色电致发光特性,其中OF3R4的最大发光亮度达到5 795 cd/m²,而OF3R6的最大外量子效率达到1.0%,其最大发光亮度为2 690 cd/m².     

敏化型电致发光器件原理与技术

近年来,高性能荧光有机电致发光器件(FOLEDs)的开发受到了广泛关注。由于荧光材料仅能利用25%的单重态激子辐射发光,FOLEDs的外量子效率(EQE)理论极限为5%。通过能量转移,充分利用主体分子的单重态与三重态激子敏化荧光客体发光,可以提高激子利用率。目前敏化型FOLEDs(SFOLEDs)的最高EQE已达26.1%。本文详细介绍了SFOLEDs的敏化原理和机制,并根据敏化机制的不同,系统地总结了热活化延迟荧光敏化、激基复合物敏化、三重态湮灭敏化和局域电荷转移杂化激发态(HLCT)敏化等各类SFOLEDs的材料与器件结构特点及其研究进展。最后本综述对该类器件的研究前景进行了展望,期待吸引更多专业的研究人员的研究兴趣,进而推动该领域的发展。     

外围准轮烷形成对萘修饰PAMAM树枝形聚合物光物理性质的调控

合成了1~3代外围修饰萘的聚酰胺-胺(PAMAM)树枝形聚合物Gn-NA,化合物通过了1H NMR,13C NMR,MALDI-TOF MS,IR的鉴定.稳态和时间分辨光物理研究表明,水溶液(含DMSO 0.3%~0.5%,V/V)中Gn-NA分子内相邻萘基团形成激基缔合物,猝灭了萘单体的荧光发射,随代数增加,对萘单体荧光猝灭作用增强.向体系中加入葫芦[7]脲(CB[7]),CB[7]与萘形成的准轮烷结构1∶1的包结复合物,1~3代Gn-NA中萘与CB[7]的结合常数分别为768,887和823 mol-1?L.准轮烷结构的形成抑制了分子内激基缔合物的生成,使单体荧光发射大大增强.本工作为可调控发光树枝形聚合物的发展提供了一种新的策略.     

苯甲酸乙酯与三氟乙酸分子在激发态的相互作用

本文通过室温和低温下的稳态荧光及瞬态荧光的测定,研究了苯甲酸乙酯与二氟乙酸分子在激发态的相互作用。结果表明,苯甲酸乙酯与三氟乙酸分子不仅能形成双分子激基复合物,还可以形成2:1的三分子激基复合物。其形成途径是先形成双分子激基复合物,再与苯甲酸乙酯分子相互作用而成,而不是经过苯甲酸乙酯的二聚体。在苯甲酸乙酯的浓溶液中,还证明了二聚体的存在。所以在苯甲酸乙酯的二氟乙酸浓溶液中,同时存在着四种不同的荧光发射组分,并分别测定了它们的荧光寿命。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.